Why has my ipad2 slowed down after 8.0.2 ?

MMy iPad2 slowed to a crawl after installing 8.0.2. Everything takes seconds to load, emails open slowly, etc

Try some basic troubleshooting:
(A) Try reset iPad
Hold down the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears
(B) Try reset all settings
Settings>General>Reset>Reset All Settings
(C) Setup as new (data will be lost if you do not have backup)
Settings>General>Reset>Erase all content and settings

Similar Messages

Why do my loops slow down after many iterations

My Vi seems to freeze up or slow down after several iterations of the loop. This is an Analog Input Capture VI.
Attachments:
Final_Main_VI_with_working_amp.vi ‏456 KB

First of all, thank you for your contribution. You are right to say that I have no need in changing the AI Config every time that the loop runs. But as this is supposed to be a soft-scope, I need to be able to update the parameters associated with AI Start while the loop is running (e.g. trigger level).
I have tried to move the AI Config subVI out of both loops but the error as a result is: "No transfer in progress for the specified source."
I also need a sampling rate of exactly 96kHz. I realize that the laptop clock cannot attain this value. Do you know how I could get exactly 96kHz.
Attachments:
Final_Main_VI_with_working_amp.vi ‏498 KB

The spinning beach ball - why has my MacBook slowed down SO much?

My MacBook has become terribly slow. I get the spinning beachball almost every time I hit a key now, and I am just about ready to throw everything out the window. Mainly I use my laptop for internet browsing (Safari only), iTunes and iPhoto. I do have third party stuff on my computer such as the software for my Nike Fuelband, and Jawbone Updater for my Jambox. I have Java too, which I probaby don't need. Oh I also have some card games - but those sorts of things I get from the App Store. I don't muck around with settings or anything, because I don't know anything about that! I just USE my laptop. So having said that, I don't know why I would have the spinning beachball as my new sidekick....
I have followed instructions I found on another discussion (https://discussions.apple.com/thread/5303293?start=0&tstart=0) to test my MacBook. My results are good news I think: Logging in as a guest account, everything runs like I would hope - iTunes opens up quickly, same with iPhoto, and when I look up sites on Safari they load up quickly. I then started in safe mode, and logged in as myself. Excusing the "stuttering" of the graphics and such, I would say that in safe mode things moved along much more quickly. I got the beachball in safe mode but not every time I tried opening something, and only briefly when it did appear.
My question is, where do I go from here? How do I "clean up" or fix my MacBook so that it runs like it used to? Like I say, I think it must be good news that in those test scenarios my MacBook performs much more like the good old days. Does this suggest that my own account just has crap on it that needs to go? And if so, the big question is, how on earth would I go about identifying the source(s) of the problem and then getting rid of them?
I have searched some on the forums here but I'm at a bit of a loss because I don't really even know what to search for! As I say, I am a complete user only! I do follow instructions pretty well though, so if anyone could point me to the right help page or give me further advice, I would be oh-so-grateful!
cheers,
Lydia

Please read this whole message before doing anything.
This procedure is a diagnostic test. It changes nothing, and therefore will not, in itself, solve your problem.
Third-party system modifications are a common cause of usability problems. By a “system modification,” I mean software that affects the operation of other software — potentially for the worse. The procedure will help identify which such modifications you've installed, as well as certain other aspects of the configuration that may have a bearing on the problem. Don’t be alarmed by the seeming complexity of these instructions — they’re easy to carry out and won’t change anything on your Mac.
These steps are to be taken while booted in “normal” mode, not in safe mode, if possible. If you’re now running in safe mode, reboot as usual before continuing. If you can only boot in safe mode, you can still use this procedure, but not all of it will work. Be sure to mention that in your reply, if you haven't already done so.
Below are instructions to enter UNIX shell commands. The commands are safe and do nothing but produce human-readable text output, but they must be entered exactly as given in order to work. If you have doubts about the safety of the procedure suggested here, search this site for other discussions in which it’s been followed without any report of ill effects. I am not asking you to trust me. If you can't satisfy yourself that these instructions are safe, don't follow them.
The commands will line-wrap or scroll in your browser, but each one is really just a single long line, all of which must be selected. You can accomplish this easily by triple-clicking anywhere in the line. The whole line will highlight, and you can then copy it.
Note: If you have more than one user account, Step 2 must be taken as an administrator. Ordinarily that would be the user created automatically when you booted the system for the first time. Step 1 should be taken as the user who has the problem, if different. Most personal Macs have only one user, and in that case this paragraph doesn’t apply.
Launch the Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
When you launch Terminal, a text window will open with a line already in it, ending either in a dollar sign (“$”) or a percent sign (“%”). If you get the percent sign, enter “sh” and press return. You should then get a new line ending in a dollar sign.
Step 1
Triple-click anywhere in the line of text below on this page to select it:
P=/usr/libexec/PlistBuddy; E () { [ "$o" ] && echo $'\n'$1: && echo "$o"; }; F () { o=$($P -c Print "$2" | awk -F'= ' \/$3'/{print $2}'); E "$1"; }; { o=$(kextstat -kl | awk '!/com\.apple/{printf "%s %s\n", $6, $7}'); E "Loaded extrinsic kernel extensions"; o=$(launchctl list | sed 1d | awk '!/0x|com\.apple|org\.(x|openbsd)|\.[0-9]+$/{print $3}'); E "Loaded extrinsic user agents"; o=$(launchctl getenv DYLD_INSERT_LIBRARIES); E "Inserted libraries"; o=$(crontab -l); E "User cron tasks"; o=$(cat /e*/lau*); E "Global launchd configuration"; o=$(cat ~/.lau*); E "Per-user launchd configuration"; F "Global login items" /L*/P*/loginwindow.plist Path; F "Per-user login items" L*/P*/com.apple.loginitems.plist Path; F "Safari extensions" L*/Saf*/*/E*.plist Bundle | sed 's/\..*$//;s/-[1-9]$//'; o=$(find ~ $TMPDIR.. $ -flags +sappnd,schg,uappnd,uchg -o ! -user $UID -o ! -perm -600 $ | wc -l); [ "$o" == 0 ] || printf "\nRestricted user files: %s\n" $o; cd; o=$(find -L /S*/L*/E* {,/}L*/{Ad,Compon,Ex,In,Keyb,Mail/Bu,P*P,Qu,Scripti,Servi,Spo}* -type d -name Contents -prune | while read d; do $P -c 'Print :CFBundleIdentifier' "$d/Info.plist" | egrep -qv "^com\.apple\.[^x]|Accusys|ArcMSR|ATTO|HDPro|HighPoint|driver\.stex|hp-fax|JMicron|microsoft\.MDI|print|SoftRAID" && echo ${d%/Contents}; done); E "Extrinsic loadable bundles"; o=$(find /u*/{,*/}lib -type f -exec sh -c 'file -b "$1" | grep -qw shared && ! codesign -v "$1"' {} {} \; -print); E "Unsigned shared libraries"; for d in {,/}L*/{La,Priv,Sta}* L*/Fonts; do o=$(ls -A "$d"); E "$d"; done; } 2> /dev/null | pbcopy; echo $'\nStep 1 done'
Copy the selected text to the Clipboard by pressing the key combination command-C. Then click anywhere in the Terminal window and paste (command-V). I've tested these instructions only with the Safari web browser. If you use another browser, you may have to press the return key after pasting.
The command may take up to a few minutes to run, depending on how many files you have and the speed of the computer. Wait for the line "Step 1 done" to appear below what you entered. The output of the command will be automatically copied to the Clipboard. If the command produced no output, the Clipboard will be empty. Paste into a reply to this message. No typing is involved in this step.
Step 2
Remember that you must be logged in as an administrator for this step. Do as in Step 1 with this line:
E () { [ "$o" ] && echo $'\n'$1: && echo "$o"; }; { o=$(sudo launchctl list | sed 1d | awk '!/0x|com\.(apple|openssh|vix\.cron)|org\.(amav|apac|cups|isc|ntp|postf|x)/{print $3}'); E "Loaded extrinsic daemons"; o=$(sudo defaults read com.apple.loginwindow LoginHook); E "Login hook"; o=$(sudo crontab -l); E "Root cron tasks"; o=$(syslog -k Sender kernel -k Message CReq 'GPU |hfs: Ru|I/O e|find tok|n Cause: -|NVDA\(|pagin|timed? ?o' | tail | awk '/:/{$4=""; print}'); E "Log check"; } 2> /dev/null | pbcopy; echo $'\nStep 2 done'
This time you'll be prompted for your login password, which you do have to type. Nothing will be displayed when you type it. Type it carefully and then press return. You may get a one-time warning to be careful. Heed that warning, but don't post it. If you see a message that your username "is not in the sudoers file," then you're not logged in as an administrator.
You can then quit Terminal.
To prevent confusion, I'll repeat: When you type your password in the Terminal window, you won't see what you're typing.
Note: If you don’t have a login password, set one before taking Step 2. If that’s not possible, skip the step.
Important: If any personal information, such as your name or email address, appears in the output of these commands, anonymize it before posting. Usually that won't be necessary.
Remember, Steps 1 and 2 are all copy-and-paste — no typing is involved, apart from your password. Also remember to post the output.

Why does Firefox performance slow down after starting Jack server?

Hello,
I started configuring my audio on my system. So, I want to have jack working (not jack2, to work with wineasio) with best sound quality with all sound routed through jack. When i start jack server with this command and settings:
killall jackd;killall pulseaudio;jackd -R -t 1000 -d alsa -P hw:0,0 -r 48000 -n2 -D
Firefox slows down, opens new pages slow and the scroll down is very very slow. I had this issue with other distros too. I suspect that it has to do with realtime ( which i need for my audio related apps like traktor through wine, ardour, ableton through wine etc) without being sure about it. Any idea why this is happening?

zabrielza wrote:I had this issue with other distros too.
This smells like hardware problem. Do this:
1. Kill pulseaudio, jack, and make sure they are killed
2. Make sure you do not renice anything or apply other such tweaks
3. Run jackd -d alsa
4. Use your system
5. If unsatisfactory, try jackd -d alsa -p 1024 -n 3
6. Use your system
Jack runs with realtime priority by default (no flag required), and we still use the audio group to provide that privilege. I also do not advocate the realtime kernel, but you may try it. Jack not functioning well (i.e. hampering other tasks significantly) on a standard kernel is cause for concern.
You can read/grep your dmesg and systemd journal for suspicious messages. You may try running real-time audio tasks in another operating system with your hardware, and upon success may proceed to debug the problem on Linux, possibly with the help of the alsa developers.
Or better yet, grab a supported semi-pro external audio device if jack is important for you. However, this may not help if the problem is somewhere deeper, e.g. at the hardware interrupt level.
Last edited by schivmeister (2015-04-30 18:21:56)

Speed of ipad2 slowed down after updating to ios8

I Updated my ipad2 to iOS 8, but it processing speed slowed down. How to I rectify this issue?

Hi, IsmailFarid.
Thank you for visiting Apple Support Communities.
Here is an article that I would recommend going through when experiencing this issue.
iOS: Not responding or does not turn on
http://support.apple.com/kb/TS3281
Cheers,
Jason H.

Why did my mac slow down after installing 10.4.11?

I updated from 10.4.9 to 10.4.11. Since then my computer has slowed to a crawl and the spinning beach ball appears every time I click on anything, from attempting to launch Firefox to trying to Force Quit. Is there a way to solve this problem?

General advice on updating:
It is worth noting that it is an extreme rarity for updates to cause upsets to your system, as they have all been extensively beta-tested, but they may well reveal pre-existing ones, particularly those of which you may have been unaware. If you are actually aware of any glitches, make sure they are fixed before proceeding further.
So before you do anything else:
If you can, make a full backup first to an external hard disk. Ideally you should always have a bootable clone of your system that enables you to revert to the previous pre-update state.
Turn off sleep mode for both screen and hard disk.
Disconnect all peripherals except your keyboard and mouse.
1. Repair Permissions (in Disk Utility)
2. Verify the state of your hard disk using Disk Utility. If any faults are reported, restart from your install disk (holding down the C key), go to Disk Utility, and repair your startup disk. Restart again to get back to your startup disk.
At least you can now be reasonably certain that your system does not contain any obvious faults that might cause an update/upgrade to fail.
3. Download the correct version of the COMBO update from the Apple download site. If your car runs on gasoline you would not want to fill the tank with diesel, so don’t try to install the PPC updater on an Intel Mac!
The 10.4.11 Combo Updater for PPC Macs is here: http://support.apple.com/kb/DL170
And for Intel Macs: http://support.apple.com/kb/DL172
If you prefer to download updates via Software Update in the Apple menu (which would ensure that the correct version for your Mac was being downloaded), it is not recommended to allow SU to install major (or even minor) updates automatically. Set Software Update to just download the updater without immediately installing it. There is always the possibility that the combined download and install (which can be a lengthy process) might be interrupted by a power outage or your cat walking across the keyboard, and an interrupted install will almost certainly cause havoc. Once it is downloaded, you can install at a time that suits you. You should make a backup copy of the updater on a CD in case you ever need a reinstall.
Full details about the 10.4.11 update here: http://support.apple.com/kb/TA24901?viewlocale=en_US
More information on using Software Updater here:
http://support.apple.com/kb/TA24901?viewlocale=en_US
Using the Combo updater ensures that all system files changed since the original 10.4.0 are included, and any that may have been missed out or subsequently damaged will be repaired. The Delta updater, although a temptingly smaller download, only takes you from the previous version to the new one, i.e. for example from 10.4.10 to 10.4.11. Software Update will generally download the Delta updater only. The preferable Combo updater needs to be downloaded from Apple's download site.
Now proceed as follows:
4. Close all applications and turn off energy saving and screensaver.
5. Unplug all peripherals except your keyboard and mouse.
6. Install the update/upgrade. Do not under any circumstances interrupt this procedure. Do not do anything else on your computer while it is installing. Be patient.
7. When it ask for a restart to complete the installation, click restart. This can take longer than normal, there are probably thousands of files to overwrite and place in the correct location. Do nothing while this is going on.
8. Once your Mac is awake, repair permissions again, and you should be good to go!
If your Mac seems slightly sluggish or ‘different’, perform a second restart. It can’t hurt and is sometimes efficacious!
9. Open a few of your most used applications and check that all is OK. In this connection please remember that not all manufacturers of third party applications and plug-ins, add-ons, haxies etc, will have had time to do any necessary rewrites to their software to make them compliant with the latest version of your operating system. Give them a weeks or two while you regularly check their websites for updates. This applies particularly to plug-ins for Safari 3.
N.B. Do not attempt to install two different updates at the same time as each may have different routines and requirements. Follow the above recommendations for each update in turn.
Lastly, Apple's own article on the subject of Software Update may also be useful reading:
http://docs.info.apple.com/article.html?artnum=106695
[b]If you are updating Safari (or just have):[/b]
Input Managers from third parties can do as much harm as good. They use a security loophole to reach right into your applications' code and change that code as the application starts up. If you have installed an OS update and Safari is crashing, the very [i]first[/i] thing to do is clear out your InputManagers folders (both in your own Library and in the top-level /Library), log out and log back in, and try again.
So, disable all third party add-ons before updating Safari, as they may not have been updated yet for the new version. Add them back one by one. If something goes awry, remove it again and check on the software manufacturer's website for news of an update to match your version of Safari. Remember: Tiger up to 10.4.10 used Safari 2.0.4 or, if you downloaded it, Safari 3.0.3 beta. Safari 10.4.11 used Safari 3.0.4 which was [i]not[/i] a beta. If Safari 3.1.2 on 10.4.11 is not the fastest browser you have ever used, then something is wrong!
Moreover, trying to revert to Safari 3.0.4 (or worse still, version 2) when running 10.4.11 or 10.5 can have repercussions, as Safari 3.1.1 uses a completely different webkit on which other applications like iChat, Mail and Dashboard Widgets etc also rely, and may entail you having to reinstall an earlier operating system.
[b][i]Most errors reported here after an update are due to an unrepaired or undetected inherent fault in the system, and/or a third party ad-on.[/b][/i] Two such add-on that have been frequently mentioned here for causing such problems are Piclens and Pithhelmet. If you have them, trash them.
Additional tips on software installation here:
http://docs.info.apple.com/article.html?artnum=106692
To reiterate, Input Managers reach right into an application and alter its code. This puts the behavior of the affected application outside the control and responsibility of its developers: a recipe for problems. That's not to say that issues absolutely will ensue as a result of Input Managers, but you, as a user, must decide. If the functionality of a specific Input Manager or set thereof is really important to you, you may well choose to assume the associated risk.
Again, the advice is to remove all Input Managers from the following directories:
/Library/InputManagers
~/Library/InputManagers
especially prior to system updates (they can always be added back one-by-one later).

Why has my streaming slowed down

I have had my mac for a few months now. Absolutely love it. We watched youtube and online tv constantly with no problems. Lately though streaming has slowed and the videos are constantly buffering. Is there something I could have downloaded that slowed my internet or computer down? Is there a program or software i should have that protects my mac?

I have had my mac for a few months now. Absolutely love it. We watched youtube and online tv constantly with no problems. Lately though streaming has slowed and the videos are constantly buffering. Is there something I could have downloaded that slowed my internet or computer down? Is there a program or software i should have that protects my mac?

Why has my computer slowed down since I downloaded Mavericks?

Here is my EtreCheck
Hardware Information:
          MacBook Pro (13-inch, Mid 2009)
          MacBook Pro - model: MacBookPro5,5
          1 2.26 GHz Intel Core 2 Duo CPU: 2 cores
          2 GB RAM
Video Information:
          NVIDIA GeForce 9400M - VRAM: 256 MB
System Software:
          OS X 10.9.2 (13C64) - Uptime: 0 days 9:35:36
Disk Information:
          Hitachi HTS545016B9SA02 disk0 : (160.04 GB)
                    EFI (disk0s1) <not mounted>: 209.7 MB
                    Macintosh HD (disk0s2) / [Startup]: 159.18 GB (11.19 GB free) (Low!)
                    Recovery HD (disk0s3) <not mounted>: 650 MB
          HL-DT-ST DVDRW GS23N
USB Information:
          Apple Inc. Built-in iSight
          Apple Internal Memory Card Reader
          Apple Inc. Apple Internal Keyboard / Trackpad
          Apple Computer, Inc. IR Receiver
          Apple Inc. BRCM2046 Hub
                    Apple Inc. Bluetooth USB Host Controller
FireWire Information:
Thunderbolt Information:
Startup Items:
          CiscoVPN: Path: /System/Library/StartupItems/CiscoVPN
Launch Daemons:
          [System] com.adobe.fpsaud.plist 3rd-Party support link
          [System] com.cisco.anyconnect.vpnagentd.plist 3rd-Party support link
          [System] com.google.keystone.daemon.plist 3rd-Party support link
          [System] com.microsoft.office.licensing.helper.plist 3rd-Party support link
Launch Agents:
          [System] com.cisco.anyconnect.gui.plist 3rd-Party support link
          [System] com.google.keystone.agent.plist 3rd-Party support link
User Launch Agents:
          [not loaded] com.adobe.ARM.[...].plist 3rd-Party support link
          [not loaded] com.adobe.ARM.[...].plist 3rd-Party support link
          [not loaded] [email protected]
          [not loaded] jp.co.canon.Inkjet_Extended_Survey_Agent.plist 3rd-Party support link
User Login Items:
          iTunesHelper
          Canon IJ Network Scanner Selector EX
          Dropbox
          Google Drive
          AdobeResourceSynchronizer
Internet Plug-ins:
          o1dbrowserplugin: Version: 5.2.4.18058 3rd-Party support link
          Default Browser: Version: 537 - SDK 10.9
          OfficeLiveBrowserPlugin: Version: 12.3.6 3rd-Party support link
          AdobePDFViewerNPAPI: Version: 11.0.06 - SDK 10.6 3rd-Party support link
          FlashPlayer-10.6: Version: 12.0.0.77 - SDK 10.6 3rd-Party support link
          DivXBrowserPlugin: Version: 2.0 3rd-Party support link
          Silverlight: Version: 5.1.20913.0 - SDK 10.6 3rd-Party support link
          Flash Player: Version: 12.0.0.77 - SDK 10.6 3rd-Party support link
          QuickTime Plugin: Version: 7.7.3
          googletalkbrowserplugin: Version: 5.2.4.18058 3rd-Party support link
          iPhotoPhotocast: Version: 7.0
          AdobePDFViewer: Version: 11.0.06 - SDK 10.6 3rd-Party support link
          SharePointBrowserPlugin: Version: 14.3.9 - SDK 10.6 3rd-Party support link
          JavaAppletPlugin: Version: 14.8.0 - SDK 10.9 Outdated! Update
Audio Plug-ins:
          BluetoothAudioPlugIn: Version: 1.0 - SDK 10.9
          AirPlay: Version: 2.0 - SDK 10.9
          AppleAVBAudio: Version: 203.2 - SDK 10.9
          iSightAudio: Version: 7.7.3 - SDK 10.9
iTunes Plug-ins:
          Quartz Composer Visualizer: Version: 1.4 - SDK 10.9
User Internet Plug-ins:
          BrowserPlus_2.9.8: Version: 2.9.8 3rd-Party support link
3rd Party Preference Panes:
          BrowserPlus 3rd-Party support link
          Flash Player 3rd-Party support link
Old Applications:
          /Library/Application Support/Microsoft/MERP2.0
                    Microsoft Error Reporting:          Version: 2.2.9 - SDK 10.4 3rd-Party support link
                    Microsoft Ship Asserts:          Version: 1.1.4 - SDK 10.4 3rd-Party support link
          /Applications/Cisco
                    Cisco AnyConnect Secure Mobility Client:          Version: 3.0.08057 - SDK 10.4 3rd-Party support link
                    Uninstall AnyConnect:          Version: 3.0.08057 - SDK 10.4 3rd-Party support link
          SLLauncher:          Version: 1.0 - SDK 10.5 3rd-Party support link
                    /Library/Application Support/Microsoft/Silverlight/OutOfBrowser/SLLauncher.app
          Solver:          Version: 1.0 - SDK 10.5 3rd-Party support link
                    /Applications/Microsoft Office 2011/Office/Add-Ins/Solver.app
          /Applications/Microsoft Office 2011/Office
                    Microsoft Graph:          Version: 14.3.9 - SDK 10.5 3rd-Party support link
                    Microsoft Database Utility:          Version: 14.3.9 - SDK 10.5 3rd-Party support link
                    Microsoft Office Reminders:          Version: 14.3.9 - SDK 10.5 3rd-Party support link
                    Microsoft Upload Center:          Version: 14.3.9 - SDK 10.5 3rd-Party support link
                    My Day:          Version: 14.3.9 - SDK 10.5 3rd-Party support link
                    SyncServicesAgent:          Version: 14.3.9 - SDK 10.5 3rd-Party support link
                    Open XML for Excel:          Version: 14.3.9 - SDK 10.5 3rd-Party support link
                    Microsoft Alerts Daemon:          Version: 14.3.9 - SDK 10.5 3rd-Party support link
                    Microsoft Database Daemon:          Version: 14.3.9 - SDK 10.5 3rd-Party support link
                    Microsoft Chart Converter:          Version: 14.3.9 - SDK 10.5 3rd-Party support link
                    Microsoft Clip Gallery:          Version: 14.3.9 - SDK 10.5 3rd-Party support link
          Epson Printer Utility 4:          Version: 9.19 - SDK 10.5 3rd-Party support link
                    /Library/Printers/EPSON/InkjetPrinter2/Utility/UT4/Epson Printer Utility 4.app
          /Applications/Microsoft Office 2011
                    Microsoft PowerPoint:          Version: 14.3.9 - SDK 10.5 3rd-Party support link
                    Microsoft Excel:          Version: 14.3.9 - SDK 10.5 3rd-Party support link
                    Microsoft Outlook:          Version: 14.3.9 - SDK 10.5 3rd-Party support link
                    Microsoft Word:          Version: 14.3.9 - SDK 10.5 3rd-Party support link
                    Microsoft Document Connection:          Version: 14.3.9 - SDK 10.5 3rd-Party support link
          Microsoft Language Register:          Version: 14.3.9 - SDK 10.5 3rd-Party support link
                    /Applications/Microsoft Office 2011/Additional Tools/Microsoft Language Register/Microsoft Language Register.app
          vpndownloader:          Version: 3.0.08057 - SDK 10.4 3rd-Party support link
                    /opt/cisco/anyconnect/bin/vpndownloader.app
          Microsoft AutoUpdate:          Version: 2.3.6 - SDK 10.4 3rd-Party support link
                    /Library/Application Support/Microsoft/MAU2.0/Microsoft AutoUpdate.app
          Microsoft Communicator:          Version: 13.1.3 - SDK 10.5 3rd-Party support link
Time Machine:
          Skip System Files: NO
          Auto backup: YES
          Volumes being backed up:
                    Macintosh HD: Disk size: 148.25 GB Disk used: 137.83 GB
          Destinations:
                    My Passport [Local] (Last used)
                    Total size: 465.41 GB
                    Total number of backups: 4
                    Oldest backup: 2014-02-03 21:42:50 +0000
                    Last backup: 2014-03-27 03:40:40 +0000
                    Size of backup disk: Excellent
                              Backup size 465.41 GB > (Disk size 148.25 GB X 3)
          Time Machine details may not be accurate.
          All volumes being backed up may not be listed.
Top Processes by CPU:
               4%          WindowServer
               3%          mdworker
               1%          EtreCheck
               1%          Google Drive
               0%          Dropbox
Top Processes by Memory:
          165 MB          com.apple.WebKit.WebContent
          86 MB          Safari
          84 MB          Mendeley Desktop
          63 MB          DashboardClient
          47 MB          WindowServer
Virtual Memory Information:
          42 MB          Free RAM
          559 MB          Active RAM
          526 MB          Inactive RAM
          332 MB          Wired RAM
          1.54 GB          Page-ins
          34 MB          Page-outs

You've got some Cisco VPN software. Do you need that? You might want to make sure that it is up to date and compatible with 10.9. The same for Google Drive and DropBox.
Try a Safe Boot, which will disable all the third-party extensions. Does that improve matters?

AME CS4 Batch - Slow Down After First File

I've been using AME to batch timelines from various different Premiere Pro projects. Problem is the first one in the batch will take the normal amount of time around 2 hours. Then everyone in the batch after that takes 5 hours.
If I stop the encode once it gets to the second file and slows. And then restart the program and put that one as first it renders in a fraction of the time....
Why does AME drastically slow down after the first file in the queue?

Where do you close the ResultSet?
Where do you close the Statement?
Presumably you only create one connection for all users or you close it somewhere.

Has anyone noticed MacBook Air slowing down after installing Maverick

Has anyone noticed MacBook Air slowing down after installing Maverick?

Activity Monitor - Mavericks
Activity Monitor in Mavericks has significant changes
Performance Guide
Why is my computer slow
Why your Mac runs slower than it should
Slow Mac After Mavericks
Things you can do to resolve slowdowns see post by Kappy

Why does my data logging program slow down after a while?

A data logging program created with Labview 5.1. Slows down after a few weeks and creates files in the Temp. directory.Computer is Siemens Scenic pro 124 MB ram and AT-MIO-16XE50 Data acquisition board. Also using Solartron Dig. probes and Fieldpoint units.

Any chance that you are using Win 95/88/ME? Those OS's have well documented
memory leaks which will consume all your available memory if an application
is run long enough. Also there are some issues of memory management within
LabView in the allocation of memory.
The solution to the first is to switch to WinNT/2K. The second will be much
more difficult.
On Thu, 22 Feb 2001 03:19:12 -0800 (PST), Freek wrote:
>A data logging program created with Labview 5.1. Slows down after a
>few weeks and creates files in the Temp. directory.Computer is Siemens
>Scenic pro 124 MB ram and AT-MIO-16XE50 Data acquisition board. Also
>using Solartron Dig. probes and Fieldpoint units.
===========================================================================
SolidW
orks Research Partner National Instruments Alliance Member
Christopher Dubea Phone: (504) 847-2280
Vice President of Engineering Fax: (504) 847-2282
Moving Parts L.L.C. email: [email protected]
P. O. Box 6117 URL: http://www.movingpart.com
Slidell, LA 70469-6117

System Slow-Down After Printing

I recently installed Mountain Lion. Over the last couple of weeks I have noticed a significant operating system (10.8.2) slow down after printing with my Epson R3000 printer. This happens after every printing session. When I say slow-down I mean significant delays and dreading "beachballs" when opening applications, selecting menu items or anything else I should choose to do. I'm left with re-starting the computer to get going normally again.After re-atarting I have gone to "verify permissions" and I get approx "5" pages of permission errors, all associated with the printer library in some fashion or another. I then repair all those permissions and re-start my MacPro. The operating system then works as normal and I can use the computer with no problems (until I start printing again). I mainly use the computer for photo editing with Adobe Photoshop CS6, Adobe Lightroom 4 and Aperture 3.2.
I did not have this problem before upgrading to Mountain Lion (and then to 10.8.2). I did not get "significant" permission errors before upgrading. Since all printer drivers for this printer are handled now by Apple via the "new" Software Update process I can't even re-download the Epson printer driver and start over. I'm completely at a loss as to what, associated with the printer function, is causing these "significant" permission errors and subsequent operating system slow down. My printer is almost brand new and was working flawlessly before Mountain Lion. Let me be clear though, I can print fine. My problem is the system slow down after using the print function which I am only guessing has something to do with the "5" pages of permission errors after printting photos (with CS6/Lightroom/Aperture).
Incidently, I am not in any way a computer expert. Verifying and repairing permissions is about all I know how to do that's why I need help. I also just thought I would try the forums first before going to technical support to see what people thought about this.
Again, I repair the permission errors, re-start my system and all is fine. Any further suggestions would be deeply appreciated.

When you see a beachball cursor or the slowness is especially bad, note the exact time: hour, minute, second.
These instructions must be carried out as an administrator. If you have only one user account, you are the administrator.
Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad and start typing the name.
The title of the Console window should be All Messages. If it isn't, select
          SYSTEM LOG QUERIES ▹ All Messages
from the log list on the left. If you don't see that list, select
          View ▹ Show Log List
from the menu bar at the top of the screen.
Each message in the log begins with the date and time when it was entered. Scroll back to the time you noted above.
Select the messages entered from then until the end of the episode, or until they start to repeat, whichever comes first.
Copy the messages to the Clipboard by pressing the key combination command-C. Paste into a reply to this message by pressing command-V.
The log contains a vast amount of information, almost all of it useless for solving any particular problem. When posting a log extract, be selective. A few dozen lines are almost always more than enough.
Please don't indiscriminately dump thousands of lines from the log into this discussion.
Please don't post screenshots of log messages—post the text.
Some private information, such as your name, may appear in the log. Anonymize before posting.

Compleat system slow down after current updates

Has anyone learned why we all seem to have a compleat system slow down after the current set of updates? Everything works, but is VERY slow to respond. Even iTunes 7.1.1 plays video choppy now. Audio track plays fine however. Odd.
-Apple //GS

First of all, try repairing your permissions with Applications> Utilities> Disk Utility. Select the hard drive you're running off of and then click the Repair Permissions button.
If that doesn't work I'd do an archive and install:
http://docs.info.apple.com/article.html?artnum=107120
Then run the combo update(s) instead of the consecutive ones. That seems to be working for a lot of people, but it will probably take a while.

System slow down after lion update 8/18/11

Has anyone else had a problem with their system slowing down after downloading the system update for Lion on 8/18? My system is not nearly as responsive and is only about two weeks old and have not installed any software other than Microsoft Office 2011 when I bought the machine. Any ideas?

Ok my system is booting and shutting down faster now.. This method worked for me:
First, I repaired the permissions:
1) Open up Disk Utility
2) Select your hard drive
3) Now select Repair Disk Permissions.
Then, I deleted the caches folder:
1) From the Finder's Go menu, select Go To Folder, and go to this folder: /Library
2) Delete everything inside the Caches folder (This might require the Admin Username & Password)
Finally, go to System Preferences and click on Startup Disc then click on your boot drive (In my case I've selected my HD labeled "Macintosh HD Mac OS X, 10.7.1". Now do a restart by clicking on the Restart button. If you don't have a Startup drive selected your mac will waste time at boot searching for a suitable boot drive !
I Hope this works for you as well.
Cheers!

Why does Photoshop keep slowing down?

I've been using Adobe Photoshop CS5.1 for two years now, and for some reason it seems to have the problem of slowing down after using it for a while, so if I'm working on a project I have to keep closing it and reopening it to get it fast again. It's weird because it doesn't seem to matter how much stuff is on the canvas, it's just how much I've drawn and hit undo and erased or did anything, After like 5 minutes of straight work it just gets too slow for me to work in, like when I switch tools or change the color it takes a couple seconds to respond. So literally every couple minutes I have to restart Photoshop and open the same file.
What's really odd is that sometimes Photoshop will work perfectly fine and stay lightning fast for hours. Like, for the last couple of months it's been 100% fine, but since a few days ago it started to have this "slowing down" issue again. Every couple months it seems to decide to be perfectly fine or just really annoying. I didn't change anything in my computer.
It can't be my computers specs or my settings in Photoshop, but I will tell you all of that anyway.
OS - Windows 7 64-bit
CPU - Intel Core 2 Quad Q6600 @ 3.0GHz
RAM - 12GB DDR3 @ 1333MHz

There is no malware scanner running, in fact I have tried closing out all other applications and unnecessary processes to help improve performance. No luck.
Also, my post actually wasn't quite finished, but my internet shut off on me last night and I guess that just automatically posted whatever I had done before then. What's even better is that the forums won't allow me to edit it. What great features!
Anyway, here's the FULL spec sheet of my computer...
OS - Windows 7 64-bit
CPU - Intel Core 2 Quad Q6600 @ 3.0GHz
RAM - 12GB DDR3 @ 1333MHz
GPU - NVIDIA GeForce GTS 450 1GB
Storage - 1x 128GB SSD (OS installed on), 1x 750GB HDD, 1x 160GB HDD
I have the 64-bit version of Photoshop CS5.1 Extended, installed on the SSD. Here's the settings I have in the preferences:
Memory Usage - 100%
Scratch Disks - All 3, SSD 1st, 750GB HDD 2nd, 160GB HDD 3rd
History States - 100
Cache Levels - 8
Cache Tile Size - 1028K
I have fiddled with these settings and restarted Photoshop countless times. In the end it's the same exact result: Photoshop slows down after a few minutes of work and I have to restart it. I have about 50GB free on the SSD, 150GB free on the 750GB, and about 140GB free on the 160GB.
I don't understand why it gets so slow even when my RAM usage only makes it up to about 45%. Why doesn't it just utilize ALL of the memory like I told it to?
I've tried setting cache to 1, 2, and 4, same result. Cache tile size to all the different settings, same result. History states to an extremely low level like 10, same result. I just don't understand why Photoshop is doing this, especially because it decides to speed up on its own every couple of months...

Why has my ipad2 slowed down after 8.0.2 ?

Similar Messages

Maybe you are looking for