Why has my Kodak all in one printer stopped working properly since downloading Yosemite?

Printer feeds paper and ink carriage passes twice and then stops.  Eventually the paper is spat out with no ink on it.  Bizarrely the printer works fine if you request a test print or printer head alignment test.  Is this a software issue?

Yup this truly *****!!! My Kodak all in one printer also won't work either since I updated my Mac Just have to say Apple that it is really disappointing when you are running a small business and you have to spend extra expenses that shouldn't be necessary in buying a whole new printer. I checked your printer updates and sure enough there was every update for every other printer except Kodak. Ah well.. while am going to spend money on a new printer I might as well spend money on a new computer too.

Similar Messages

  • Compatibility of HPTouchsmart15 and Kodak all in one printer

    Cannot print using HP touchsmart 15 with my Kodak all in one printer. Downloaded soft ware, etc.says Driver is unavailable, however also shows documents inqueue ready to print.

    Follow this process if it helps:
    Download the latest AiO software from Kodak.
    Deinstall all software.
    Re-install the AiO software at this location:
    Macintosh HD/Library/Printers/
    To view the path:
    Select 'Go' on desktop and select 'Computer'
    Select 'Macintosh HD'
    Select 'Library'
    Select 'Printers'
    This is the path to install your AiO Printer software.
    Install software to this path.
    Then type in the script posted online at Kodak where "lindaterry" will obviously be replaced by your own hard disk name
    When asked for the password type in the main (admin) password
    It will remain static. i.e., will not show what you type in.
    Press return and type in the remainder script.
    Then go to Settings
    Select Printers & Scanners
    Add , select your printer and it should show up in the left hand pane.
    If not, contact Kodak for remote support.

  • I installed kodak all in one printer but its not working, it says its ready but its not printing

    I installed a kodak all in one printer 5250 and it says its ready but won'nt print the test page. what can I do?

    When you go to System Preferences > Printing, is the new printer found there?

  • HT2693 Kodak All-in-One printer and Airprint?

    Can a Kodak All-in-One printer run with Airprint?  Is there a device that adds Airprint and Airplay to devices that do not have that feature?

    Kodak does not appear in the list of Compatible Air Print Manufactuers in the following link:
    AirPrint Basics.
    http://support.apple.com/kb/ht4356
    With that said, there are several alternatives both software and hardware based to give non Airprint compatible printers the ability to be used by iPads, iPhones and other iDevices.
    If you are running a Mac Pc you can look into Printopia
    http://www.ecamm.com/mac/printopia/
    If you are more interested in a hardware solution look into Air Print servers such as:
    http://www.lantronix.com/it-management/xprintserver/xprintserver.html

  • HT4356 How do i print on my Kodak all in one printer from my Ipad?

    I have a Kodak all in one wifi enabled printer. I can only print things like pictures and stuff but can't print documents from my Ipad2. is there anything i can do to enable me print documents?

    Wadamu wrote:
    I have a Kodak all in one wifi enabled printer. I can only print things like pictures and stuff but can't print documents from my Ipad2. is there anything i can do to enable me print documents?
    I'm not sure what 'stuff' you're refering to but If you're able to connect to the printer and print photos then I see no reason why you can't also print documents from other apps as long as they support printing.
    What else are you trying to print? When you touch the share button within the document, is the printer option there?

  • What is the best all in one printer that works with the iPad

    The best all-in-one-printer to use with the ipad mini

    Any that advertise Airprint compability will work for printing. Note that you can't use the scanning or faxing features of an all-in-one with an iPad.
    See the Airprint printers on the Apple store site:
    http://store.apple.com/us/ipad/ipad-accessories/printers#!
    Matt

  • The fax function on my c7280 all-in-one printer ceased working since installing windows 8....?

    Product: hp photosmart c7280 all-in-one printer,fax, copier,scanner. I recently bought a new desktop (lenovo) with windows 8 pre installed. My printer prints, scans and copies but now refuses to fax. The compatibility centre for windows 8.1 tells me that my printer is compatible with the new os and na action is required...Any suggestions??? Tks

    Hello there! Welcome to the forums @francojuve ,
    I read about how you can no longer fax after upgrading to Windows 8. I have a couple of my own suggestion that might help!
    1. Uninstall the Printer Software
    2. Restart the PC
    3. Reinstall the driver for Windows 8 here: HP Photosmart Full Feature Software and Drivers
    Also, try the troubleshooting steps from this guide: Cannot Send or Receive Faxes
    If the troubleshooting does not help resolve your issue, I would then suggest calling HP's Technical Support to see about further options for you, such as a replacement or trade in. If you are calling within North America, the number is 1-800-474-6836 and if you are calling outside of the US/Canada region,: click here.
    Best wishes to you!
    R a i n b o w 7000I work on behalf of HP
    Click the “Kudos Thumbs Up" at the bottom of this post to say
    “Thanks” for helping!
    Click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution!

  • Help with a driver to enable HP Office jet 5610 all in one printer to work with ubuntu

    trying to scan and up load to my computer, but my HP office jet 5610 all in one printer does not work with Ubuntu.. Need new driver or something.

    This is a Firefox help forum, so getting your printer working on ubuntu is beyond the scope of this forum. I would recommend something like [http://www.ubuntuforums.org/ www.ubuntuforums.org/] for help

  • All-in-one printer that works with Airport Extreme (n)

    Hi all,
    I have recently bought an Intel MacBook and an Airport Extreme 'n'.
    Now I am looking for a compatible all-in-one (multifunction) printer. I have been searching on the net all day till my eyes are sore.
    I don't need to use it too often so am looking for a a cheapie under $120. I mainly need it for printing black and white, photocopying and scanning the occasional document.
    Is anyone using one with decent quality or can recommend one?
    I know about ifelix's list but am looking for a recommendation as well as one that is compatible...
    thanks you...

    I have looked around here, and just can't figure this
    out, please someone help. I just purchased a 3180 hd
    with my macbook. Was printing wirelessly fine with
    my previous hd and new extreme. Now this one isn't
    working and hp said that it is not a supported
    wireless printer. Why on earth would apple sell this
    printer then.
    Could someone please tell me how to make this printer
    work over my new airport extreme base. PLEASE
    This is the problem with the new airport extreme(n). All the printers work when connected directly to your computer, it is when they are connected to the base station that there seems to be compatibility problems. I have ruled out buying the C3180 for this reason.
    Someone may be able to help you. If not you will either have to connect it directly to your mackbook to use it or return it and buy one that is compatible.

  • Hp officejet 6110 all in one printer wont work!!!! i need help!!!!!!!!

    i turn on my printer and it says that i need to remove and check my cartridges. i did that a million times and it still says that same message. i dont know what else to do. any suggestions??? also, i dont know where to get a connection for my labtop to connect to my printer. where can i get it???

    Hi,
    There is not a scan driver for the 6100 for 10.6/10.7. The product was released in 2004, and reached end of life in 2008 (a year before 10.6 was released). Chances are that a driver will not be written for this product.
    I don't have a 6110 here that I can test with, so all I can offer are steps that I would try given the opportunity.
    One thing I noticed from your response on trying the 6210 driver was that the product (in the queue) was still showing as the 6110. I am curious as to how you went about installing using the 6210 driver. I can only think of two scenarios off the top of my head:
    1) You had the 6110 installed, went to options and supplies, to the driver tab, and specified the new driver.
    2) You had no products installed, and when you went to add, you specified the 6210 driver in the Print Using box prior to clicking add.
    The option that is more likely to provide the scan option is option 2, so if you haven't tried it, I would encourage you to do so. If that doesn't work, try other Officejet All in one drivers, or consider upgrading if none of the above will get it to work.
    I understand that the lack of a full feature driver is frustrating, but most (if not all) companies have dates in place to cut off development/support for their products. A similar scenario is the Netgear FA311 Network Interface Card. I remember using one of these cards back in 2000/2001, but if I wanted a windows vista 64-bit driver i'd be out of luck. I'd likely end up using a realtek driver (per a forum post suggestion) and see if it would work, and hope for the best.
    Best of luck, I hope option 2 (if not already attempted) gets it working for you.

  • Hp psc 1200 all in one printer not working

    I reformatted my disk after downloading Yosemite, as some programs were very slow to respond.
    My colors in laptop MacBookPro were washed off!
    Now after downloading new Yosemite software, my printer is not getting recognised!
    Drivers from HP site don't work too.
    Any good advice is required.
    Thanks

    According to http://h10025.www1.hp.com/ewfrf/wc/softwareCategory?lc=en&dlc=en&cc=us&product=3 74575&sw_lang=&os=219&#N701 there's no software, but only a driver that supports SL printing, but not scanning.

  • HP All in One mx8500 stopped working with MacBook Pro

    So I have a MacBook Pro and a small Sony Vaio (that I seldom use) and both were configured to the HP when I brought it home.  I have used it almost exclusively as a wiresless with good results until one day it stopped working with the MacBook Pro.  MacBook is operating on Snow Leopard and is routinely updated.  The HP simply does not recognize the MacBook any longer-won't print from it nor won't scan to it.  It doesn't give an error message, it just pauses and when I tell it to resume, it pauses again.  I have tried using it with the wire to connect the two and that doesn't work either.  All this time, if I switch to the Sony, it performs perfectly.  Any hints???

    Download and install this: http://support.apple.com/kb/DL907
    Reset the printing system:
    - Go to System Preferences > Print & Scan
    - Right (or control) click in the rectangle listing your printers and select Reset Printing System.
    WARNING - this will delete ALL of your printers!
    - Select the plus sign to re-add a printer. Select the Defualt tab on the top of the window. Look for the printer, select it and wait until the "Add" button becomes available. Click it.
    Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
    I am employed by HP

  • Safari has stopped working properly since upgrading to Mountain Lion.  Have parental controls in place and it will not add websites.  Also short cuts at top of tabs now all messed up!

    Since upgrading to mountain lion the other day (from lion) safari has not been working properly.  I have parental controls in place but seem unable to add new web pages to allowed list - wasn't expecting to have to anyway - these are webpages that were working perfectly well on safari prior to upgrade.  Also the shortcuts above the tabs on safari are all now messed up.
    Any advice on how to fix - I am not a computer expert so keep it simple please!
    In the meantime I am having to use Firefox.
    Thanks
    Andrew

    Since upgrading to mountain lion the other day (from lion) safari has not been working properly.  I have parental controls in place but seem unable to add new web pages to allowed list - wasn't expecting to have to anyway - these are webpages that were working perfectly well on safari prior to upgrade.  Also the shortcuts above the tabs on safari are all now messed up.
    Any advice on how to fix - I am not a computer expert so keep it simple please!
    In the meantime I am having to use Firefox.
    Thanks
    Andrew

  • HP PSC 1507 All-in-One - Scanner stopped working

    Hi
    I'm on a MacBook Pro with Snow Leopard (10.6.8) and use VueScan (9.1.16) to scan through USB connection.
    For several years, no problems, always worked.
    No all of the sudden it stops working.
    It scans jitter (black/grey/white dots).
    Anythings I can fix or look at to see what's the problem?
    Thanks
    Dee

    Hello Dee! aka @KunoichiDee, welcome to the forums
    I read about how your scans are now showing up in bad quality, when scanning to your Mac. I have some ideas that might help.
    First of all, we want to know if the problem is with the printer, or with the software. Make a copy from the printer itself to test the printer. If the copies have the same issue as the scans, the issue is with the printer, and I would recommend a power reset and ensure the printer is plugged in directly to the wall outlet, avoiding power bars and surge protectors. This ensures the printer is receiving full power and may help greatly.
    Power reset:
    Press the Power button to turn on the product.
    With the product turned on, disconnect the power cord from the rear of the product.
    Unplug the power cord from the wall outlet.
    Wait at least 15 seconds.
    Plug the power cord back into the wall outlet.
    Reconnect the power cord to the rear of the product.
    If the product does not turn on by itself, press the Power button to turn it on.
    If the copies turn out fine, and the problem is only when you scan, try these steps:
    Mac OS X: How to reset the printing system (This will delete all printers on your Mac)
    Repair disk permissions
    Restart your Mac
    Re-add the printer (do not use the AirPrint driver)
    Let me know the results! Good luck & enjoy your weekend
    R a i n b o w 7000I work on behalf of HP
    Click the “Kudos Thumbs Up" at the bottom of this post to say
    “Thanks” for helping!
    Click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution!

  • Why has the menu button on my nano stopped working? can it be fixed?

    ive had my 5th generation nano for just over 2 years.  the menu button has stopped working ?  does anyone know if this can be fixed or should i just buy a new one? thank you !

    For reasons that I can not explain, on trying to turn it on this morning it started to work. said conect to power, so its charging now. hopefuly this is a good sign that it can be fixed by resetting on the computer.
    thanks

Maybe you are looking for