Why has my use of the apostrophe started inserting a string of weird characters on my iPad?

My iPad has recently started replacing the apostrophe with a string of weird characters (something like &39; or similar) when I post a comment on Facebook or YouTube. Why is it, and how do I get rid of it? Anybody know?
(The apostrophe appears as normal when I'm still typing; it's only when I send / transmit the the post that it appears.)

On the other hand if you want to fix it, it's a simple as going here:
http://www.adobe.com/products/activation/
and starting a chat session to get them to reset your activations.

Similar Messages

I tried to reset my iPad, and it has not got past the apple start up page

I tried to reset my iPad, and it has not got past the apple start up in several hours. I've tried connecting it to itunes but its not detected.
What can I do?

I assume that you mean that all you see on the screen is the Apple logo and it hasn't changed for hours from that screen. You may need to restore using recovery mode, since your iPad is not being recognized in iTunes.
Instructions here.
http://support.apple.com/kb/ht4097
But - did you try this first?
Reboot the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider if it appears on the screen - let go of the buttons. Let the iPad start up.

HT204306 How can I get my old password back after I have changed it? I cannot change it back because it has been used in the last year

how can I get my old password back after I have changed it? I cannot change it back because it has been used in the last year

HI, thanks, but I know I can set a new password. I just wanted to get my old one back cos I have used it a long time & can therefore remember it.

Error: "Variable State has been used outside the reusable components"

When I open a query in the ad hoc query designer I get several error messages like "Variable State has been used outside the reusable components." I don't what this means or how to fix it.
"State" is one of the variables used. And there is a error for every variable that is used.
All the variables are in the free characteristics.
When I open the query in Query Designer, it is ok.
Any ideas?

Hi Fong,
PLease check the following link:
http://help.sap.com/saphelp_nw04/helpdata/en/1f/03223c5f00612be10000000a11402f/content.htm
It states that:
You cannot integrate variables into the query directly.
However, you can use variables in reusable structures, or restricted or calculate key figures, which are used in the Ad-hoc Query Designer
Hope this helps...

Why has canada not recieved the 3.2 update we are still on 3.1

why has canada not recieved the 3.2 update we are still on 3.1

Bump: No love for Canada
The Canadian distro hasn't recieved a single update in the last 6 months. Just about every other country has recieved updates in the last month.
What gives Lenovo?
Yes, I know I can flash and get the US version (which I have) but, we shouldn't have to jump through hoops.

Bean has been used before the taglib directive.

Hi all,
While i am trying to execute my proj, i am getting the follwing error.
Error(1): Prefix: bean has been used before the taglib directive. Use a different prefix or move the taglib directive above any references to this prefix.
Error(2): Prefix: html has been used before the taglib directive. Use a different prefix or move the taglib directive above any references to this prefix.
It is referring to the following piece of code. Can anyone explain me about the error here as i can't pick it up.
<%@ page isErrorPage="true" import="java.io.PrintStream"%>
<%@ page contentType="text/html;charset=windows-1252"%>
<html>
<head>
<meta http-equiv="Content-Type" content="text/html; charset=windows-1252">
<LINK REL=Stylesheet TYPE="text/css" href="../css/GStyle.css">
<title>My Error Page</title>
</head>
<body>
<%@ include file="/common/Banner.jsp" %>

<%@ include file="messages.jsp"%>
</br>
</br>
<input type="Button" value="Back" onclick='history.go(-1);' class="button" />
</body>
</html>
What should i modify here?
Thanks in advance,,

u mite have declared the taglib in both these includes...
<%@ include file="/common/Banner.jsp" %>

<%@ include file="messages.jsp"%>Regards
Shanu

Why has adobe acrobat changed the dimensions of my original jpeg file?

Why has adobe acrobat changed the dimensions of my original jpeg file? I uploaded an A3 jpeg file and adobe converted it to pdf but the scale is all wrong. Why is this? What can I do about it?

Normally if you open a graphic in Acrobat, it automatically adjusts the PDF to the size of the graphic. It sounds as though you are doing something else to create a PDF. It would help to know how you created the PDF, you seem to be suggesting you did it with an online tool and not Acrobat. In that case you should go to the appropriate product forum.

I can't use my apple account in my Iphone please help me a message appear said"This ID has not used in the iTunes Store"

I can't use my apple account in my Iphone please help me a message appear said"This ID has not used in the iTunes Store"

Hello, BaraaBa.
Thank you for visiting Apple Support Communities.
This sounds like your Apple ID has not yet been used with the iTunes Store. Here is an article that I would recommend going through when experiencing this issue.
Use your Apple ID with the iTunes Store
Open the latest version of iTunes.
Choose Store > Sign In.
Enter your Apple ID and password and click Sign In.
Click Review when asked to review your information.
Enter your billing information.
Click Continue after you enter your credit card and billing information. You can remove or edit your credit card information at any time. Learn more about updating your iTunes Store account information.
Using an existing Apple ID with the iTunes Store, Mac App Store, and iBooks Store
http://support.apple.com/kb/HT2589
Cheers,
Jason H.

Why has iTunes taken over the iPhoto file? I can not attach pictures to files because I can not find them. I can not upload pictures to software like Shutterfly for the same reason.

Why has iTunes taken over the iPhoto function? I can not attach pictures to files because I can not find them. This has happened suddenly as if there were some keystrokes that changed the previous pattern. I am not able to upload pictures to programs such as Shutterfly because I can not find them. When I try to upload, the computer takes me to an iTunes folder.

How are you uploading?

Best way to copy total start up HD to a new HD to be used as the new start up disc

Have installed two new internal 2 TB HD's. I wish to copy the entire contents of the CURRENT (older) start up HD to one of these new HD's and then use that as the new start up HD. What is the best way to copy the entire start up disk so that it can be used as the new start up disk (hard drive)?
Thanks for any advice.

Disk Utility => Restore (and use the Help menu)
Programs that clone are essential.
SuperDuper

Why can't I find the getting started file on my desktop?

Why can't I find the getting started file on my desktop? I know the name is different in the video, but the folder itself is not sowing up after i download it and try to create the site.

Can someone please help me with my question?
I'm trying to remove private browsing from my computer and I need to find the "MainMenu.nib" file... when I go to that directory it isn't there.
I'm running Yosemite.

Can a single quote be used at the beginning of a query string parameter

Hi all,
I am a relative newbie and have a newbie question.
Can a single quote be used at the beginning of a query string parameter passed to a jsp page? Are there any inherant problems with this? Is there a comprehensive list of characters that must be escaped in a query string parameter?
Example: http://mysite.com/myjsp.jsp?param1='nghdh
Thanks

You'll have to escape most non-letter characters before you can pass them as a URL. I don't know if it's necessary for a single quote, but better safe than sorry.
Either use java.net.URLEncoder(...) or use javax.servlet.http.HttpServletResponse.encodeURL(String). I wouldn't recommend using unescaped characters in your URLs, that might cause pretty funny behavior that's sometimes hard to trace back. Don't worry about decoding it, your JSP/Servlet container will do it when you call javax.servlet.http.HttpServletRequest.getParameter(String).

Why don't some of the photos I took with my iPhone 4S appear on my iPad 3? Both are connected to WiFi and iCloud is activated on both devices.

Why don't some of the photos I took with my iPhone 4S appear on my iPad 3? Both are connected to WiFi and iCloud is activated on both devices.

Welcome to the Apple Community.
Photostream only syncs photos over Wi-Fi, make sure you are connected to Wi-Fi to begin with.
Photostream only syncs when the camera app is closed, ensure it is closed.
Photostream only syncs when the battery is above 20%, try recharging the device
Try disabling photo stream on your device (settings > iCloud), restarting your device and then re-enabling photo stream.
If this doesn't help you may need to reset photo stream. You can do this at icloud.com by clicking on your name in the top right corner and then the advanced settings in the pop-up dialogue box that appears.
Note: disabling photostream and re-enabling it will result in any photos that are currently in the photostream album on your device, that are older than 30 days old, not being added back.

Why do Sony DSC-RX100M3 raw files look strange in PE9 when flash has been used in the shot?

I have just bought a Sony DSC-RX100M3 camera and use it to shoot raw + jpeg. I want to use the raw files in my Photoshop Elements 9, which has the Camera Raw plug-in version 6.5.0.216 installed. I have downloaded the Adobe DNG converter version 8.7.1.311 so I can import my Sony raw files into PE 9 as they cannot be used directly. Most of the time these raw files look OK, but when I use the flash on my camera and then look at the raw files in PE9 they look far more pink than the corresponding jpeg files. The jpeg files look more or less as I remember the scene when I shot the picture.
When I look at the same raw and jpeg files in Sony's own Image Data Converter software (version 4.2.04.17270) the raw and jpeg files look very similar to one another, and there is no pink colour cast in the raw file.
What am I doing wrong in Photoshop Elements? I though the DNG converter keeps all the information from the original raw file and makes no changes to it, so why does the raw file look so different when flash has been used?
Thanks for any help you can give!
AVM

Looking at the pictures of the camera online, I'd say there is no lens shade--a device to keep light from the sides from causing lens flare--and the camera lens, itself, was just too far extended and there was a lens shadow. You probably can't use the flash that close up and should back off and zoom in further. Experimenting would give you a sense of what situations will have a shadow of the lens or not.
Your ACR plug-in is old enough not use have Process Version 2012, yet, only 2010 and 2003 so Adobe didn't have the idea to put the selector down next to the camera profile. The toning options are better with Process 2012 so that would be a reason to upgrade, but I am not sure that the Camera Neutral profile in PSE9 would be different than PSE13. If Adobe changed the camera profiles then people's pictures would look different once they upgraded to a new version and that's not something that's supposed to happen.
You can certainly download the PSE13 trial and see if things look any different, but they may not: Download a free trial or buy Adobe products | Adobe downloads There would be newer minimum OS version requirements for the newer versions of Adobe software so check those out before trying to install, unless you're on Windows 7+ or OSX 10.8+ then it should be fine.
One more thing, the White-Balance tint is set to +10 by the camera:
This As Shot WB is more magenta and even when using the Adobe Standard profile, moving the Tint down to +0 makes things a little more green like your camera JPG. So there is more than just changing the camera profile that you can do:

Why can't use all the function when deployed Duke Bank successfully

i am use the DukesBankApp.ear in j2eetutorial14 to deployed .When i change the "public Object ejbCreate() throws CreateException" to "public String ejbCreate() throws CreateException",deployed Duke Bank successfully
But,I open the client,i can not use all the function. for example,when i creat new customer or account .Applecation message watch will say "remote exception"
why?or send the true DukesBankApp.ear to me .My mailbox is "[email protected]"
thinks!!!!! i want to receive your help imminence!think you very much!

the sever log say:
[#|2005-05-10T22:39:18.609+0800|信息|sun-appserver-pe8.0|javax.enterprise.system.container.ejb|_ThreadID=13;|
javax.ejb.EJBException: createCustomer: Could not create Entity EJB; nested exception is: com.sun.jdo.api.persistence.support.JDOFatalUserException: JDO76604: JNDI lookup for cmp-resource 'jdbc/BankDB' failed.
NestedException: javax.naming.NameNotFoundException: BankDB not found
     at com.sun.ebank.ejb.customer.CustomerControllerBean.createCustomer(Unknown Source)
     at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
     at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
     at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
     at java.lang.reflect.Method.invoke(Method.java:324)
     at com.sun.enterprise.security.SecurityUtil$2.run(SecurityUtil.java:146)
     at java.security.AccessController.doPrivileged(Native Method)
     at com.sun.enterprise.security.application.EJBSecurityManager.doAsPrivileged(EJBSecurityManager.java:930)
     at com.sun.enterprise.security.SecurityUtil.invoke(SecurityUtil.java:151)
     at com.sun.ejb.containers.EJBObjectInvocationHandler.invoke(EJBObjectInvocationHandler.java:128)
     at $Proxy27.createCustomer(Unknown Source)
     at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
     at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
     at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
     at java.lang.reflect.Method.invoke(Method.java:324)
     at com.sun.corba.ee.impl.presentation.rmi.ReflectiveTie._invoke(ReflectiveTie.java:117)
     at com.sun.corba.ee.impl.protocol.CorbaServerRequestDispatcherImpl.dispatchToServant(CorbaServerRequestDispatcherImpl.java:651)
     at com.sun.corba.ee.impl.protocol.CorbaServerRequestDispatcherImpl.dispatch(CorbaServerRequestDispatcherImpl.java:190)
     at com.sun.corba.ee.impl.protocol.CorbaMessageMediatorImpl.handleRequestRequest(CorbaMessageMediatorImpl.java:1653)
     at com.sun.corba.ee.impl.protocol.CorbaMessageMediatorImpl.handleRequest(CorbaMessageMediatorImpl.java:1513)
     at com.sun.corba.ee.impl.protocol.CorbaMessageMediatorImpl.handleInput(CorbaMessageMediatorImpl.java:895)
     at com.sun.corba.ee.impl.protocol.giopmsgheaders.RequestMessage_1_2.callback(RequestMessage_1_2.java:172)
     at com.sun.corba.ee.impl.protocol.CorbaMessageMediatorImpl.handleRequest(CorbaMessageMediatorImpl.java:668)
     at com.sun.corba.ee.impl.transport.SocketOrChannelConnectionImpl.dispatch(SocketOrChannelConnectionImpl.java:375)
     at com.sun.corba.ee.impl.transport.SocketOrChannelConnectionImpl.read(SocketOrChannelConnectionImpl.java:284)
     at com.sun.corba.ee.impl.transport.ReaderThreadImpl.doWork(ReaderThreadImpl.java:73)
     at com.sun.corba.ee.impl.orbutil.threadpool.ThreadPoolImpl$WorkerThread.run(ThreadPoolImpl.java:382)
|#]

Why has my use of the apostrophe started inserting a string of weird characters on my iPad?

Similar Messages

Maybe you are looking for