Why has my X started playing the ringtone when I plug it into my computer?
This just started and it has never done it before. Any thoughts?
Did you recently adjust your ringtones? Whenever the phone mounts/unmounts the SD card there is an alert that plays, if you recently changed this alert it would explain this.
Similar Messages
-
my Macbook Pro charger has a fault. It blows the fuse when I plug it into a wall socket without being connected to the laptop. is it covered under warranty? I got it in December 2013
Did you purchase Apple Care prior to your 1 year warranty expiring?
-
Why is the iphone icon not appearing on my itunes when I plug it into my computer?
Why is the iphone icon not appearing on my itunes when I plug it into my computer? I am online, my itunes is up and running, my new phone is plugged in, and for whatever reason the iphone icon that is supposed to appear is not showing up after I plug my phone in.
Place the Device into Recovery mode...
http://support.apple.com/kb/HT1808
Note on Recovery Mode.
You may need to try this More than Once...
Be sure to Follow ALL the Steps...
Once you have Recovered your Device...
Re-Sync your Content or Restore from the most Recent Backup...
Restore from Backup > http://support.apple.com/kb/ht1766 -
My mini ipod appears off and not respond to any commands when pressed the buttons to reset, apple logo appeared and then the apple support site and it shuts down. already tried all the steps, but none worked, and when I plug it into my computer it does not appear in the iTunes bar. what do I do?
If MacKeeper corrupted the Recovery partition then even I underestimated its potential for damage. Garbage "cleaning" apps will cause misery but I have not found that the Recovery partition to have been affected by using MacKeeper or anything like it. I doubt that it did so, but I have learned not to underestimate the potential for such things to result in system corruption.
Before concluding your Mac has a hardware failure, try booting OS X Internet Recovery by holding command option r on startup (three fingers). That will force your iMac to bypass the Recovery partition altogether, and convey the ability to create a new one.
An Internet connection will be required (wired or wireless).
At the Mac OS X Utilities screen, select Disk Utility. Select your startup volume (usually named "Macintosh HD") and click the Repair Disk button. Describe any errors it reports in red. If Disk Utility reports "The volume Macintosh HD appears to be OK" in green then you can be reasonably (though not completely) assured your hard disk is in good working order.
Assuming the HD remains usable you can then use Disk Utility to erase it. Reinstall OS X, restore your essential software and other files, and don't reinstall the junk. -
My iPhone shut down and factory reset itself for no reason, and now when I plug it into my computer or any power source, the apple shines but it doesn't get any further than that. How can I fix it?
Try Here > http://support.apple.com/kb/HT1808
You may need to try this More than Once...
Be sure to Follow ALL the Steps...
But... if the Device has been Modified... this will Not necessarily work. -
I have my iPod Touch named "Holden" and when I plug it into my computer, a screen pops up saying "Blake Jones's iPod".
However, in iTunes it says "Holden".
A few days ago, I did plug my friends iPod (named "Blake Jones's iPod) into my computer. How do I make it to say "Holden's iPod" on the screen that pops up right after I plug it in?Start here:
iOS: Device not recognized in iTunes for Windows
If it is the "new" 16 GB 4G iPod you need iTunes version 10.7 on the computer. -
I have a ipod touch 4th gen and it wont chrage. When you plug it into the wall the lightniing bolt screen will apear but no matter how long you leave it, it will never turn on. Also it the lightning bolt screen wont even come on when you plug it into a computer (PC)..........PLease help its been like this for forever
Hi Gammer576775!
Here is an article that will help you troubleshoot this issue with your iPod touch:
iPod touch: Hardware troubleshooting
http://support.apple.com/kb/ts2771
Will not power on, or will not turn on unless connected to power
Verify that the Sleep/Wake button functions. If it does not function, inspect it for signs of damage. If the button is damaged or is not functioning when pressed, seek service.
Connect the iPod touch to an Apple USB power adapter and let it charge for at least ten minutes.
After at least 15 minutes, if the display turns on and…
The home screen appears, the device should be working. Continue charging it until it is completely charged and you see this battery icon in the upper-right corner of the screen: . Then disconnect the device from power. If it immediately turns off, seek service.
The low-battery image appears even after the iPod touch has charged for at least 20 minutes: See the "iPod touch displays the low-battery image and is unresponsive" symptom in this article.
Something other than the Home screen or low-battery image appears , continue with this article for further troubleshooting steps.
If the iPod touch did not turn on, reset it while connected to an Apple USB power adapter. If the display turns on, go to step 4.If the display remains black, go to the next step.
Restore the device. Connect it to a computer and open iTunes. If iTunes recognizes it and indicates that it is in recovery mode, attempt to restore the iPod touch. If the device doesn't appear in iTunes or if you have difficulties in restoring it, see this article for further assistance.
If restoring the iPod touch resolved the issue, go to step 4. If restoring it did not solve the issue, seek service.
Thanks for using the Apple Support Communities!
Cheers,
Braden -
When I first got my iphone i plugged it into my friends computer and added songs from their itunes. Now when i plug it into my computer it will not connect or show up in the sidebar in itunes. I have already tried factory resetting the phone and 'authorizing this computer' in itunes. Can anyone help?
Is your iTunes up to date, it is now 10.7, click the iTunes button at the top of this page if you need the new version.
-
So yeah...last night I was checking out my iPod (bored at the in-laws) and all of a sudden the screen went blank and the only thing I can get it to do is have the black screen w/ the white apple logo on it. It won't turn on, doesn't give the the option to power down, it won't charge, AND it's NOT being recognized when I plug it into my computer. Not by iTunes OR my computer. I've tried holding down the top button and the home button at the same time...nothing. And since it's not being recognized on my computer, I cannot restart it or go back to factory settings. Someone please help! I've had it for 18 months so the warranty is no longer valid and I don't know how to fix it. THANK YOU in advance!
- I would try placing the iPod in recovery mode and then see if iTunes will see the iPod. try both with the iPod not connected to the computer and with it connect. For recovery mode see:
iPhone and iPod touch: Unable to update or restore
- Next see if placing the the iPod in DFU mode will make it visible
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings -
My iPhone 4 will not turn on, when I plug it into my computer and load up iTunes its in recovery mode and the only option is to restore my device to factory settings, I have no back up of my phone I've also tried the home/sleep button thing but nothing, I have literally done every method I was told, I checked for water damage and that's fine. I don't want to restore my phone or buy a new one or pay for repairs because that's wasting money when it could be a simple way to fix it. And yes, I've also tried charging it and turning it in. I really need some help with my phone
That does happen. It depends on how hard the server is being hit, as well as the connection speed of your system. If you are on a windows system, you will want to disable any antivirus or firewall software during the download.
-
I just updated my iTunes, and I need to delete photos from my iPod 4, and there is a Photo Library that synced to my iPod when i plugged it into my computer, and now it doesnt have the option to delete them off my iPod. How do I get rid of these photos? I have read other questions that say to plug the iPod into the computer and like un-sync it, but I downloaded the new iTunes and it doesnt have a photos tab. Does anyone know how to solve my problem? Please and Thank You, Megan!
Just what did you do to the computer?
It sounds like the iPodf is seening the iTunes libary as a new libary. -
I have a 1st generation ipod, which I love. When I plug it into my computer an image of a disk with a magnifying glass appears (disk scan). When it finishes the scan it always checks out. I then restart it and all looks fine. Each time I plug it in to the computer it does the same thing and it wont show up on my computer. The other strange thing is all of the songs are gone from the ipod but the disk space is still being used. When the ipod is not plugged into the computer everything look fine even the correct date shows up. Any ideas????? Thanks
try reinstalling iTunes.
-
My IPhone does not show up under Devices in I Tunes when I plug it into my computer. "Devices" no longer appears on the menu at all down the side of the page.
Hope this helps:
http://www.apple.com/support/iphone/assistant/itunes/ -
After I've heard an audiobook downloaded from the public library, how do I delete it from the Shuffle to make room for other audiobooks? When I plug it into my computer, I get a screen showing how much space is left on the Shuffle but no list of files that I can delete. These books, incidentally do not appear in the ITunes screen. WRA
Select the iPod shuffle in the iTunes sidebar (under DEVICES). If this is a current 4th (or 3rd) gen iPod shuffle, you should be able to see the contents of the shuffle by type, intented under the shuffle's name (still in the sidebar). Select Music or Audiobooks (not sure where those items from the library will be listed). The items will be listed to the right, for each category. Find the items, select, and delete.
It's on page 20 of the manual
http://manuals.info.apple.com/en_US/iPod_shuffle_4thgen_User_Guide.pdf
NOTE: If this is an 1st or 2nd gen iPod shuffle, select the iPod shuffle in the iTunes sidebar (under DEVICES). Over to the right, go to the Contents tab, where the items are listed. Select and delete them from this list.
I find it more convenient to make a playlist in iTunes with things I want to put on the shuffle. I then set up automatic syncing (or use autofill) to have iTunes load the shuffle from that playlist, automatically. -
I just updated my iTunes to the new software. When I plugged it into my computer and it said I need to reset my iPod. I did this and everything on my iPod deleted. Now, it won't let me sync my music or apps back onto my iPod. What do I do?
It doesn't say anything. It runs through the sync process like normal and tells me all of the songs that it's synking. But then when it says I can disconnect it, nothing actually synked.
Maybe you are looking for
-
I have a report which has three layouts in the main section.Like topic A,B,C.I could generate all the three topics one after another by giving page breaks on the frames.But for each topic the header and footer changes. on each frame's format trigger
-
how can i creat the thumbname of an image
-
Spry Tabbed Panels set to use the Opacity fade out / in
can the Spry Tabbed Panels be set to use the Opacity fade out / in similar to the Spry Image SlideShow effects?
-
No 5.1 surround sound on X-Fi Titanium (intern
I am trying to get my X-Fi Titanium card on a new Dell XPS 420 computer to play 5. surround sound. The setup is simple. Optical out from the sound card going into optical in of Onkyo HT-S400 receiver. First I want to make sure the couple of assumptio
-
Essbase wouldn't start after change domain
hi, i'm during migrating Hyperion Planning 11.1.2.1 servers to new domain. And i thought this process would be easy. But it isn't. So firstly Essbase server didn't start. I recieved message "error initializing network:" and "Unable bind ...". How to