Why has new update totally slowed my computer down?

the new update has slowed my computer down drastically. Sites load very slowly, and sometimes not at all. Then, it continually reverts to "Firefox Updated" page

the password is an old one that I have not used in some time.
Quit Safari.
Open Keychain Access   /Applications/Utilities
Select Passwords on the left.
Delete all the keychains for the sites you have trouble logging into.
Relaunch Safari then go to Safari / Preferences, seleect the Autofill tab. Make sure: User names and passwords is selected.
Now select the Security tab. Click: Show Cookies. Delete all cookies or just the ones for the sites you mentioned.
Navigate to a site. After entering your user name and password, you should be prompted to save that data, click Yes. That will create a new keychain for you.
if you still have problems, open Keychain Access again. From the menu bar click Keychain Acces / Keychain FirstAid. Enter your admin password then click Verify. If necessary, click Repair.

Similar Messages

  • HT6601 Why has this update been installed without my knowledge?

    Why has this update been installed without my knowledge?  Why wasn't I given the opportunity to refuse the update?  Isn't this update meant to stop this unauthorised access to my computer?  Has this given back door access for ASIO, NSC, MI6 to my computer?

    So what  are your preferences set as regarding updates?
    And, are you running ML as shown in your profile?
    And, I downloaded and installed this update because there was a possible security issue; however, I have all automatic software update checks and downloads turned off, so i downloaded it manually as it was critical to install it as long as you are using the internet.
    Has this given back door access for ASIO, NSC, MI6 to my computer?
    Why would you suspect that?

  • Why is that when I install any Adobe Product it slows my computer down?

    Why is that when I install any Adobe Product it slows my computer down?

    You really need to provide more information than this.

  • Firefox.exe uses too much memory slowing the computer down, what can be done?

    This doesn't happen every time I am using the browser, maybe half of the time. When it does happen it takes a long time for it to clear up. It can slow the computer down even after I have exited out of the program, maybe still not responding because of high memory usage. Is there anything I can do to get Firefox to run smoothly?

    Some updates are better handled by Internet Explorer or the built-in updater, such as any updates from Microsoft's Windows Update or Office Update systems. (These systems are not compatible with other browsers.)
    You can use the "all systems" page to download a full installer and then copy it over to your XP system.
    https://www.mozilla.org/en-US/firefox/all/

  • Have download 350 movies to Ext HD using itunes. Left itunes library on desktop drive. My computer now runs very slowly. Is there a better way to add movies without slowing my computer down?

    Using 3 TB Western Digital HD to store 350+ converted personal movies from my collection. Want to add more movies from my collection but this process is slowing my computer down considerably. Although I have downloaded the movies to my Ext HD, have left my itunes library on my desktop main drive. Is there a way to add more movies without slowing down my computer?
    Tks.

    Using 3 TB Western Digital HD to store 350+ converted personal movies from my collection. Want to add more movies from my collection but this process is slowing my computer down considerably. Although I have downloaded the movies to my Ext HD, have left my itunes library on my desktop main drive. Is there a way to add more movies without slowing down my computer?
    Tks.

  • Whenever i download the latest version of itunes it slows my computer down and will not access the store, whenever i download the latest version of itunes it slows my computer down and will not access the store, any suggestions?

    whenever i download the latest version of itunes it slows my computer down and will not access the store, whenever i download the latest version of itunes it slows my computer down and will not access the store, any suggestions?

    In the course of your troubleshooting to date, have you worked through the following document?
    Apple software on Windows: May see performance issues and blank iTunes Store

  • Why does new update slow down my phone 4?

    I have downloaded the new update and my phone is acting so messed up. Any info as to why, and possible fixes? Screen freezes, takes a long time to move from page to page and loads pages slow. Any info is appreciated.

    Thats a hard question to answer.  The iPhone 4 has older technology than newer models which can cause the device to lag.  Depending on what data and settings you have on the device, it could run slower.  I would probably make sure to constantly close apps in multitasking and possible think about restoring the device as a new device.  Make sure to backup your data prior to the restore

  • What is this and why is it slowing my computer down?

    My Macbook has been running really slow today, so I went to Activity Monitor to see what's hogging the memory and it seems that "AddressBookShari" is the culprit. I assume it's some sort of address book sharing, but I don't know. It's taking 570+ MB of real memory! If I kill it, it still comes back.
    What exactly is this, and how can I make it stop hogging my resources?

    OK, then the sharing is done from your other computer. When you subscribe to it that causes a "shared" connection between each computer. That is why the process is running. I wouldn't worry too much about it, though. When you aren't using Address Book the process will become idle and any memory it uses that's no longer needed will move to the Inactive RAM pool and become available to other applications.
    If you don't use the Address Book you can always "unsubscribe" from the office computer.
    Why reward points?(Quoted from Discussions Terms of Use.)
    The reward system helps to increase community participation. When a community member gives you (or another member) a reward for providing helpful advice or a solution to their question, your accumulated points will increase your status level within the community.
    Members may reward you with 5 points if they deem that your reply is helpful and 10 points if you post a solution to their issue. Likewise, when you mark a reply as Helpful or Solved in your own created topic, you will be awarding the respondent with the same point values.

  • Friend has new iPod touch but no computer - can you have multiple devices under one account number?  If so how do I do it?

    I have an iPod and have an account set up already with iTunes.  My friend has brand new iPod touch but no computer.   She only wants to download CDs onto iPod but I couldn't seem to do this without being prompted to set up an account or it overriding the information for my iPod - any help would be appreciated.

    How to use multiple iPods, iPads, or iPhones with one computer

  • Why has Itunes update deleted my Iphone data in itunes?

    Have just updated my itunes and now when i plug in my iphone it no longer has any data in itunes. Message comes up saying have to restore from factory setting.
    What the ???
    Why has this happened?

    Restore from i Cloud  Phone backup in i tunes takes 2 much space

  • Why has iTunes gone really slow

    Ok for some reason after updating from one of the software updates for mountain lion, iTunes has now become really slow! It's extremely annoying because every time I open it up the whole mac becomes slow and lags loads! I was just wondering if anyone else is experiencing anything like this or is it just me? Also if you know what's wrong, please help me as I can't do anything whilst iTunes is syncing my iPhone and iPad. Thanks.

    your stats show no problems has this started today if so this link may explain more http://bt.custhelp.com/app/answers/detail/a_id/15036
    also the broadband status line on 08001690199 there is a broadband network problem affecting a large part of the UK at the moment just a matter of waiting for the fault to be cleared if you still are having problems please post back then and someone will help you further
    If you want to say thanks for a helpful answer,please click on the Ratings star on the left-hand side If the reply answers your question then please mark as ’Mark as Accepted Solution’

  • Numbers not opening after new update. Tried turning computer off completely but no luck. Any ideas as need it urgently for work! Thanks

    Please help! I have just done the new update for numbers and uploaded Mavericks, but Numbers now doesn't open and says.....do the new update to open. I have......really need this for work, so any help gratefully received!
    Thanks

    Hi dj,
    Numbers '09 is still on your computer. In a folder called 'Work '09 inside your Applications folder. If you can't find it, use Spotlight to search.
    This might get you by until your problem is solved.
    Regards,
    Ian.

  • Why has my iBook started to completely shuts down when power runs out?

    I purchased my iBook G4 in early 2006 (OSX 10.4.11)
    Until last week, I would regularly use my laptop until the battery charge was used up. I would get a low charge warning and it would automatically sleep. I could then plug it in to charge. When it was plugged in, I could touch the track pad or power button and all of the programs that were open when the power ran out would be there, just as I left them.
    This has recently changed. Now when the power runs out, I receive the same low charge message, but instead of sleeping, my computer completely shuts down. When I press the power button to reboot, everything starts back up fine, but I get a message that my date and time are off and need to be reset. I then go to the Date and Time menu, which automatically updates through my wireless connection.
    My questions are:
    1. Why is it shutting down instead of sleeping?
    2. Why is my date and time reseting to an incorrect date and time?

    The difference is that in the past, your battery shut the computer down when their was enough juice to safely sleep the machine. Now it thinks it has enough juice, but it's truly running out. The battery is necessary to maintain the date and time in the computer.
    Your battery needs to be calibrated. You should follow the instructions at:
    http://docs.info.apple.com/article.html?path=Mac/10.4/en/mh1959.html
    This will allow the battery to truly know how much juice it has left.

  • New broadband extremely slow 0.54mb down, 0.08up

    New broadband is extremely slow 0.54mb down, 0.08up - Customer support useless, can't and won't help me.
    Firstly they forgot to oorder my homehub, which turned up today, 4 days after the line was connected and after complaining then finding out it was never ordered.
    Secondly my broadband connectio is unstable and extreamly slow - Dial up would be faster.
    I have contacted BT over the chat, then over the phone. They are useless, didn;t know what the problem was then finally after the chat dropped 5 times told me there was no problem and I could pay to fix it.
    I then told the customer service that I would need to esculate the issue if they couldn't fix it and they then told me that they would call me back tomorrow! How is that going to fix the line problem?
    Since I have been let down, im not sure what I can do? If BT can't fix the problem Can I cancel the line that was connected on Firday? I can get much better speeds over 3g and I feel I have been missold a 17MB unlimied connection that's not even fast or reliable enough to run the speed tester on.
    How can the customer support say that there is no problem when clearly the line dropped several times and the onnection speed is so slow?
    Solved!
    Go to Solution.

    welcome to the BT community forum where customers help customers and only BT employees are the forum mods
    in order for the forum members to help please can you post the adsl stats from your routerr if HH4/5 then go to troubleshooting then logs and you are looking for 2 line together when hub last connected to internet and they will show your connection speed and noise margin or if netgear enter 192.168.0.1). Then run  btspeedtester  (MAC users may have problems). when first test completes then run diagnostic test and post the results ( do not reset the router).
    can you enter your phone number and post results  remember to delete number  https://www.btwholesale.com/includes/adsl/main.html
    are you connected directly via a filter to the NTE5 master or test socket or to somewhere else? Is the master the only phone socket in your home?
    Have you tried the quiet line test? - dial 17070 option 2 - should hear nothing - best done with a corded phone. if cordless phone you may hear a 'dull hum' which is normal
    Someone may then be able to offer help/assistance/suggestions to your problem
    If you like a post, or want to say thanks for a helpful answer, please click on the Ratings star on the left-hand side of the post.
    If someone answers your question correctly please let other members know by clicking on ’Mark as Accepted Solution’.

  • I downloaded the new update and restarted my computer, but now when i click on itunes it says the shortcut has been lost

    please help

    You can check here:  http://www.adobe.com/products/flash/about/  to see which version you should install for your Mac and OS.rds.
    (If you are running Mavericks: After years of fighting malware and exploits facilitated through Adobe's Flash Player, the company is taking advantage of Apple's new App Sandbox feature to restrict malicious code from running outside of Safari in OS X Mavericks.)
    You should first uninstall any previous version of Flash Player, using the uninstaller from here (make sure you use the correct one!):
    http://kb2.adobe.com/cps/909/cpsid_90906.html
    and also that you follow the instructions closely, such as closing ALL applications (including Safari) first before installing. You must also carry out a permission repair after installing anything from Adobe.
    After installing, reboot your Mac and relaunch Safari, then in Safari Preferences/Security enable ‘Allow Plugins’. If you are running 10.6.8 or later:
    When you have installed the latest version of Flash, relaunch Safari and test.
    If you're getting a "blocked plug-in" error, then in System Preferences… ▹ Flash Player ▹ Advanced
    click Check Now. Quit and relaunch your browser.
    You can also try these illustrated instructions from C F McBlob to perform a full "clean install", which will resolve the "Blocked Plug-in" message when trying to update via the GUI updater from Adobe.
    Use the FULL installer for 12.0.0.44:  Flash Player 12 (Mac OS X)
    And the instructons are here: Snow Leopard Clean Install.pdf

Maybe you are looking for

  • Archiving faulty Source file not working in Sender Adapter FCC

    Hi Experts, I have enabled "Archiving Faulty Source File" in Sender Adapter FCC and pen down the directory path accordingly. Likewise I also enable the processed mode as "archive" and give it the direcotory path. However when there is a error flagged

  • Populate drop down in a selection screen

    Hi All, I have created a selection screen where i have a drop down field .How do i populate the drop down? In the backend i have a table type in the export param. which contains all the drop downs values. Please help. Thanks tubai.

  • Ipfw, iTunes and syslog

    Hi, I've added my own ipfw rules, but now I can't get Apple Remote (from iPhone) to work. It reports that it cannot connect because there are some firewall rules (sic!). I've enabled iTunes'es listening port (3869), allowed anything to 244.0.0.0/4 to

  • Customer balance differents

    Dear Experts   My customer , they donu2019t have any open items,  only clear items (5 Documents ) , these clear items also different  document types Like AB -Accounting Document, BR- Bank Receipt, RV- Billing Document Transfer,   here suppose if chec

  • Calling an RFC from an EJB over an Enterprise Connector

    Hi all, I would like to call an RFC enabled Function Modul (FuBa) from a BW-System over an EJB in a Web AS environment bei  passing SAP Logon Ticket. To achive this goal, i've generated proxy classes (Enterprise Connector) via NWDS . If i call enterp