Why has Time machine been backing up for more than a week on Ethernet?

I recently had to format my MacBook Pro (Snow Leopard). Fortunately I was using Time Machine on Time Capsule. I was able to restore from my last backup everything as it was before.
However, after all that, backing up for the first time was taking too long (105 GB) on Wifi so I connected my laptop to the time capsule using an ethernet cable. The first 35GB backed up in a few hours... but it has taken a WEEK to go from 35GB to 70GB!!
Why is this taking so long? What can I do to speed up the process? I am worried that if I cancel the backup I'll have to start all over again...

Hi V,
Cancel it. There may be an issue, so it might never finish. Or, it could just be a hiccup, and by starting it over it will complete in a few hours at most.
When you quit it, run Repair Disk on the TM HD, and Verify disk on your internal HD (from Disk Utility).

Similar Messages

  • Can Time Machine perform encrypted backups for more than one computer to the same external drive?

    I have two MBPs.  The older MBP, with 1TB of storage, now contains two other MBP clones, for a total of 3 user machines on 1 MBP).  I'd like to back up both my newest MBP, and the older MBP with the 2 clones, to my new 5TB drive (via wi-fi).  I want to encrypt these backups, but am unclear whether it is possible.  Does TM first encrypt the drive itself, or is each back up separately encrypted?  I understand that if I wanted to encrypt an existing Time Matters backup on a drive, the prior data would be erased and reformatted, but here I am working with a new backup drive, on which one encrypted backup has been performed.
    I just don't want to overwrite this existing backup (which was for my newest MBP).
    Thanks for whatever help anyone can provide.

    You should have prepared the drive better..
    The drive should have been partitioned. It is possible to load the backups.. but you can get into trouble.
    See http://pondini.org/TM/4.html
    Since partitioning at this point would destroy the existing backup.. the best way is to setup a disk image for each of the other Macbook backups and then mount the disk image and use that for the TM backup..
    Encrypting the drive or the backup.. that is something I avoid.. backups to me are useless if I forget or lose the key.. apple have warned lose the key.. the backup is useless..
    But check pondini FAQ .. you might be able to encrypt a drive image.. or the backup.
    http://pondini.org/TM/FAQ.html
    See Q25 and 31.

  • TS4268 Why have I been charged for iMessage activation now, when I have been using iMessage for more than one year?

    I received a message on my iPhone saying that some charges could be applied due to activiation of iMessage. My question is: why have I been charged now, if I had already activated iMessage and I have been using it for more than a year.

    We are basically users and can't really help with activation. So unless a staff member can check in, you need to speak to Customer Service.
    http://helpx.adobe.com/x-productkb/global/service1.html
    Serial number and activation chat
    or
    800-833-6687
    Monday—Friday, 5am—7pm PT

  • HT4463 I purchased Aperture then it installed and the download bar has been about halfway for more than 8 hours.  What's the problem?  How can i fix?

    I purchased Aperture then it installed and the download bar has been about halfway for more than 8 hours.  What's the problem?  How can i fix?

    Mac App Store: How to resume interrupted downloads
              http://support.apple.com/kb/HT4485

  • Can I set up my time machine to back up wirelessly WITHOUT hardwiring it directly to Ethernet?

    Can I set up my time machine to back up wirelessly WITHOUT hardwiring it directly to Ethernet?

    Indeed you can, but I don't recommend it unless you live miles from the closest neighbor with WiFi. Your mileage may vary. I live in a suburban neighborhood with 32 other wireless routers (at last count) visible from my desktop. I've never encountered an error with networked Time Machine backups while using a wired Ethernet connection both from computer to router and router to Network-Attached-Storage hard drive. (USB and FireWire-connected drives also perform flawlessly. Can't speak to Thunderbolt because I don't own a Thunderbolt drive yet.)
    When I attempted to use wireless Ethernet Time Machine backup FROM the same computers (a mid 2007 MacBook OS X 10.6.8, and a mid-2011 iMac OS X 10.8, 10,9, 10.10) TO the same NAS hard drive (a 2GB Lenovo/IomegaEZ), I'd get notices every few weeks that after the backup verification, Time Machine needed to begin a fresh backup. When this happens, it deletes all the old Time Machine backups. So I never had a backup more than a couple of weeks old. With my wired connection, my oldest Time Machine backup is now about a year old, from when I first acquired the NAS drive and attached it with wired Ethernet.

  • TS3274 My iPad will not update apps.  It states it is installing but it will not complete the installation.  This has been going on for more than 24 hours.  What do I need to do?

    My iPad will not update apps.  It states it is installing but if never completes the installation this has been going on for more than 24 hours. What do I need to do?

    Try a reset:
    1. Hold the Sleep and Home button down (together) for about 10 seconds
    2. Until you see the Apple logo (very important)

  • HT5527 Account status: An error was returned from server. Please try again later - I have been trying to access my account for more than a week... always the same answer any advice appreciated.

    I have been trying to access my iCloud account for more than a week...looking to drop it to the 5GB from current 7GB. I always get the same answer any advice appreciated.  System Preferences clcik on clous = Account status: An error was returned from server. Please try again later
    I have tries later many many times.
    Thanks,
    Sophie

    I don't know why you can't access it, but if you were a MobileMe subscriber with the free extra storage this has now been removed and your account will have reverted to 5GB.

  • Accounts that have not been logged into for more than 90 days

    Hi Folks,
    Good Day.
    Can anyone help me to update below powershel script?
    below script find in my domain all the AD users accounts that have not been logged into for more than 90 days and export the report to .csv file. in addition what I want:
    1. OU=Others, Sales --> exclude this OUs
    2. Disable all the user based on 90 days export report .csv file 
    import-module activedirectory 
    $domain = "test.com" 
    $DaysInactive = 90 
    $time = (Get-Date).Adddays(-($DaysInactive))
    $timer = (Get-Date -Format yyyy-mm-dd)
    # Get all AD User with lastLogonTimestamp less than our time and set to enable
    Get-ADUser -Filter {LastLogonTimeStamp -lt $time -and enabled -eq $true} -Properties LastLogonTimeStamp |
    # Output Name and lastLogonTimestamp into CSV
    select-object givenname,Name,@{Name="Stamp"; Expression={[DateTime]::FromFileTime($_.lastLogonTimestamp).ToString('dd-MM-yyyy_hh:mm:ss')}} | Export-Csv c:\temp\90DaysInactive-$(Get-Date -format dd-MM-yyyy).csv –NoTypeInformation
    Many thanks for advance Help:

    Hi Anna,
    Good Day.
    Many thanks for your responce.
    with your help i can manage to exclude the OUs as wellas can get the .csv report via mail.
    Now i want to disable all the user based on 90 days export report .csv file.
    could you help me on this please? the report will come everyday like below:
    filename=90DaysInactive-dd-mm-yyyy.csv
    sample output:
    Given name User Name
    Last LogOn
    Test User1 user1
    03-10-2006_05:30:59
    Test User2 user2
    02-10-2006_12:00:34
    import-module activedirectory 
    $domain = "test.com" 
    $DaysInactive = 1 
    $time = (Get-Date).Adddays(-($DaysInactive))
    $timer = (Get-Date -Format yyyy-mm-dd)
    $FileName="c:\temp\90DaysInactive-$(Get-Date -format dd-MM-yyyy).csv"
    $from = "[email protected]"
    $to = "[email protected]"
    $smtpHost = "smtpservername"
    $Subject = "90 Days Inactive Accounts"
    $body = "90 Days Inactive Accounts report"
    # Get all AD User with lastLogonTimestamp less than our time and set to enable
    Get-ADUser -Filter {LastLogonTimeStamp -lt $time -and enabled -eq $true} -Properties LastLogonTimeStamp | where {($_.distinguishedname -notlike "*OU=HR*") -and ($_.distinguishedname -notlike "*OU=OT*")} | 
    # Output Name and lastLogonTimestamp into CSV
    select-object givenname,Name,@{Name="Last Logon"; Expression={[DateTime]::FromFileTime($_.lastLogonTimestamp).ToString('dd-MM-yyyy_hh:mm:ss')}} | Export-Csv c:\temp\90DaysInactive-$(Get-Date -format dd-MM-yyyy).csv -NoTypeInformation
    Send-MailMessage -From $from -To $to -Subject $subject -cc $cc -SmtpServer $smtpHost -Attachments $FileName -Body $body -BodyAsHtml
    Thanks for your advance help.

  • TS1717 Why won't the preview song play for more than 10 seconds?

    Why won't the preview song play for more than 10 seconds?

    Perhaps try resetting your iTunes Store Cache.
    Go "Edit > Preferences". In the Advanced tab, click the "Reset cache" button shown in the following screenshot:
    ... and then click OK.
    Restart your iTunes, and head back to the Store. Are you getting full previews now?

  • BB Speed stuck at 1MB for more than a week

    Hi, I hope someone can help. My broadband has been very slow and stuck at a constant 1 MB upload and dowload for more than a week. It sounds like ive been placed in the 'Lower banding' profile. I was unaware that turning the router on and off caused this, however I cant seem to get back up to the 8-9 MB that I had when I joined a month or so ago. Ive left the router on 24/7 for about 8 days, but it will occasionally reset, so I cant get a constant 3+ days stable connection.  
    Here are my stats:
    Line state:
    Connected
    Connection time:
    0 days, 04:01:35
    Downstream:
    1.125 Mbps
    Upstream:
    1.188 Mbps
    ADSL Settings
    VPI/VCI:
    0/38
    Type:
    PPPoA
    Modulation:
    G.992.5 Annex A
    Latency type:
    Fast
    Noise margin (Down/Up):
    30.8 dB / 5.9 dB
    Line attenuation (Down/Up):
    33.1 dB / 22.0 dB
    Output power (Down/Up):
    13.3 dBm / 12.4 dBm
    FEC Events (Down/Up):
    0 / 0
    CRC Events (Down/Up):
    26 / 95
    Loss of Framing (Local/Remote):
    0 / 0
    Loss of Signal (Local/Remote):
    0 / 0
    Loss of Power (Local/Remote):
    0 / 0
    HEC Events (Down/Up):
    31 / 56
    Error Seconds (Local/Remote):
    17 / 79
    Thanks for any help!

    extension cables particularly the flat type are know to cause problems and it woyld be better to get a longer rj11 modem cable something like this 
    If you like a post, or want to say thanks for a helpful answer, please click on the Ratings star on the left-hand side of the post.
    If someone answers your question correctly please let other members know by clicking on ’Mark as Accepted Solution’.

  • My iOS Developer Program is being PENDING for more than 2 weeks

    I have subscribe for the iOS DEV Program for more than 2 weeks already, money has been taken away from my Credit Card... but all until now when I log in to the developer.apple.com and want to get a certificate my account still says "PENDING" although it says it may take up to 24 hours... its been long due.... it is even more annoying when the support keep pushing you from 1 email to another.... and when you email the dev support and noone answer.

    Hi wesandmarlene1,
    Sorry you are having difficulty ordering online. An agent with access to your account will reach out to you directly by email, private message in the Forums and/or the billing telephone number on your Verizon account for more information or to help you resolve your issue. Please remember to check your spam/junk folder if you do not hear from an agent.

  • Pending order for more than 2 weeks now...

    Been trying to check options to get some premium channels for more than two weeks now, whenever I go to the page it always show the Services Overview. It says that "Your account currently has a pending order." Can't do online ordering until the pending order is cleared.

    Hi wesandmarlene1,
    Sorry you are having difficulty ordering online. An agent with access to your account will reach out to you directly by email, private message in the Forums and/or the billing telephone number on your Verizon account for more information or to help you resolve your issue. Please remember to check your spam/junk folder if you do not hear from an agent.

  • My bookshelf and Facebook icons are stuck in "waiting" apparently updating for more than a week, but I don't remember trying to update them.  I tried pressing the home and sleep buttons in as suggested, but problem not fixed

    My bookshelf and Facebook icons are stuck in "waiting" apparently updating for more than a week, but I don't remember trying to update them.  I tried pressing the home and sleep buttons in as suggested, but problem not fixed

    Keep to one discussion only. Go back to this one,
    https://discussions.apple.com/message/21087117#21087117

  • I am trying now for more than a week to download the free trial of photoshop and still was not succe

    I am trying now for more than a week to download the free trial of photoshop and still was not successful

    Well, since youi did not provide any system info or other details, you might as well try for another week. We know nothing about your operating system, what browsers you use, what network connection and so on. Start here:
    Direct Download Links for Adobe Software
    Troubleshoot Adobe Download Assistant
    Mylenium

  • I made the purchase association for more than a week, but even having already received confirmation of payment and the invoice , I can not use the application . I am being told I do not have no purchase on my name

    I made the purchase association for more than a week, but even having already received confirmation of payment and the invoice , I can not use the application . I am being told I do not have no purchase on my name. What i must to do ?

    Does your Cloud subscription show on your account page?
    https://www.adobe.com/account.html for subscriptions on your Adobe page

Maybe you are looking for

  • Report Based on SQL view not pulling in all parameters

    Post Author: ronhawker CA Forum: .NET I based a report on a SQL view below:SELECT     TOP (100) PERCENT CorpDirectory.Position, CorpDirectory.PhoneDirect, CorpDirectory.Email, CorpDirectory.Store, CorpDirectory.Name,                       CorpDirecto

  • SAP Gui on Windows Vista

    Hi, I am getting a Dump error while logging in to the SAP GUI 7.10( After Giving user name and Password) in Windows vista( Business 32 Bit OS). Error log as follows, Could anyone pls give me solution. Information on where terminated                  

  • Losing Word italics when exporting FrameMaker 11 file

    When I import a Word file into Frame - the italics and bold characters are maintained. But if I save the file as HTML or XML - they disappear. If I retag them with the character tags they are maintained, but working in a science document the italics

  • 3rd Party Battery Quirk?

    As reported on MacFixIt.com Oct. 26, 2005: "Although they sometimes offer a higher purported capacity, the downside of many third-party batteries is that when the system reaches a point of low power where it would normally automatically go to sleep a

  • HANA and DataServices - delta merge during big load

    Hi Gurus I'll do load oracle table to HANA via DataServices. Main event is big 1 table. At that time , I want to execute delta merge during load , like every 100000 records/every 3 mins etc. I'm understand about perfoemance risk but ..... I have many