Why have some tracks appeared in duplicate?

Some tracks in iTunes Match appear on my iPad and iPhone in duplicate. For example, the iTunes library on my Mac has Goldfrapp's Seventh Tree on it. This appears in playlists so it is on both my mobile devices as well. However, since subscribing to Match the downloaded tracks AND duplicate undownloaded tracks appear on my mobile devices...why is this and can I do anything about it?

If you have view automation turned on and click the disclosure triangle in the track header you can see extra automation tracks. This is to allow you to view different types of automation for a single track without having them all bunched on top of each other.
At a guess, they appear empty because you don't have any other automation on the track apart from volume. You can get rid of them by clicking on the disclosure triangle to hide them then check out the automation section of the manual, it should make more sense to you after this.
R.

Similar Messages

  • Why do some videos appear distorted or grainy?

    I have first generation iPad. Why do some videos appear distorted or grainy?  Is there a fix for this? I am using only WiFi portion of product.

    What videos? You may be viewing some very low-resolution videos.

  • I back up my iphone's icalendar to my MacBook. Why have some previous events disappeared in the phone but I can see them on the backup? How do I retrieve?

    I back up my iphone's icalendar to my MacBook. Why have some previous events disappeared in the phone but I can see them on the backup? How do I retrieve?

    Did you back it up to the cloud?

  • Why have some of my photos on  my iphone 3GS gone, they just show up as JPG?

    why have some of my photos on  my iphone 3GS gone, they just show up as JPG?

    All iPhone photos are stored as JPG files.

  • Why have some of my bookmark icons become generic, just a rectangle surrounded by a dotted line?

    Why have some of my bookmark icons become generic, just a rectangle surrounded by a dotted line?

    I had to dig a bit to figure out your cryptic reply, but I did finally get to the bottom of the mystery of Firefox's generic icons. Thanks.

  • Why do some tracks, when imported from Audacity, when selected, immediately flip to a different track?

    Up until early 2012, I digitized thousands of LP tracks using Audacity, exporting them as MP3 files and then adding them to my iTunes library as AAC format.  This all worked great.
    Now, after a year using a new MacBook Pro, I have started digitizing my remaining dozen LP's after downloading and installing the latest version of Audacity (2.0.3).  I noticed that several - not all - of the newly digitized tracks, when selected in iTunes, would immediately jump to a different track.  Sometimes the jump would be to a much older track, and sometimes to a track that was purchased from the iTunes store.  Sometimes the jump would be to the next track in sequence.  A Genius Bar staff suggested that I change from MP3 to AIFF, and that seemed to help after I re-digitized the problem tracks.  Today, however, I noticed that 3 of the 11 tracks from an album I converted yesterday were jumping to other tracks.  I had the AIFF preference set to 32-bit.  Would changing it to 16-bit help?  Why would only some tracks be affected?
    Argh!

    SJN Mpls wrote:
    This seems to have done the trick.  Thank you.
    You are welcome.  That issue between iTunes and Audacity comes up here every once in a while:
    https://discussions.apple.com/message/6959446#6959446
    If you are making archival copies of those LPs, keep the 32 bit copies somewhere and make 16-bit versions to use in iTunes.  Otherwise, just do everything in 16.

  • Why have some of my toolbar settings suddenly appeared in a foreign language?

    I tried to post a screen shot, but I can't paste here apparently. The toolbar line that has some of my icons, like Facebook, Skype, and YouTube, also contain items that appear to be written in Arabic or Greek or another foreign language.
    Fore example, first one is: rockholmi.ru followed by a search bar, then a green arrow followed by the words: Hantn (both ns are small capital Ns and the first one has this symbol ~ over it. Next comes a globe with the words: Mehho. The first h is capitalized and the second capital H is attached to the o. When I pull down the menu items next to these words, they are also in these mysterious languages. However, the rest of my toolbar is in English! Help, please!

    Start Firefox in [[Safe Mode]] to check if one of your add-ons is causing your problem (switch to the DEFAULT theme: Tools > Add-ons > Themes).
    See [[Troubleshooting extensions and themes]] and [[Troubleshooting plugins]]
    Do a malware check with a few malware scan programs.<br />
    You need to use all programs because each detects different malware.<br />
    Make sure that you update each program to get the latest version of the database before doing a scan.<br />
    * http://www.malwarebytes.org/mbam.php - Malwarebytes' Anti-Malware
    * http://www.superantispyware.com/ - SuperAntispyware
    * http://www.safer-networking.org/en/index.html - Spybot Search & Destroy
    * http://www.lavasoft.com/products/ad_aware_free.php - Ad-Aware Free
    * http://www.microsoft.com/windows/products/winfamily/defender/default.mspx - Windows Defender: Home Page
    See also "Spyware on Windows": http://kb.mozillazine.org/Popups_not_blocked and [[Searches are redirected to another site]]

  • Is it OK to have some tracks with ac3 audio, and some with AIFF?

    The reason I ask this is I decided to do my DVD with AIFF audio, to keep the quality as high as possible (it's a tutorial series for some music software.)
    I have been using the Compressor preset for "Best quality 150 minutes - 4:3" to encode my video, and the video looks fine for my needs. And I was using the AIFF part of that compressor preset for audio.
    However, now having got the entire Disc 1 of the DVD together, I'm slightly over the size limit for a Dual Layer (it's maybe only 110 minutes per layer, so I figured using the 150 minute preset with AIFF would be close) - but I was over by about 160 mb.
    So I took the longest chapter and encoded just that one chapter in ac3, and knocked off 200 mb, and now it will supposedly fit.
    So my question is: is this allowed? Can you have all chapters (tracks) with AIFF, except one chapter with ac3, in the same DVD? There is only one audio stream. Thanks....

    OK Then, Stephen,
    Then it's even worse than I thought. If all your clips are playing from start to finish, one right after the other then they all need to be one mpeg stream in a single track (I am the only one having trouble with this? ). You've got a single movie, friend.
    Currently, the way you have it set up is - after every clip in each separate VTS (Track) finishes playing, the player's laser has to back up to head of the playing clip (where it started) enter the VTS IFO area (language domain) and get the command to go back to the head of the disc, just as I outlined before. The command to get to the next Track is at the head of the disc! So you just jumped all the way across the surface of the disc to get a command that will take you back to where you just were, unecessarily (Note: It's a DVD Specification rule that there are no jumps between VTS's allowed; only through the Video manager at the head of the disc, resides near the inner hub, can you route from one VTS to another).
    Why not create an ultra compatible DVD?
    Remember, DVD players are going for as little as $9 these days. Not all are created equal. The mechanics of how a laser works is very rudimentary. If you release lots of DVDs nationally and / or internationally it's best to make your navigation as easy on these players as possible. Trust me on this. My recommendation keeps the players laser on the platter throughout all the clips. What your proposing adds, unnecessarily, extremely risky jumps back and forth across the disc, after every clip (jumps are OK, but only for a reason).
    I've had projects come to me for proofing that were set up similarly to yours that were slated for a quarter million replication run. They redid the project according to my direction - to the letter (I'm nicer in person ). This happens regularly.
    If this is your only release, then you may as well go out with a bang, by doing it right?
    Or never mind, it's your DVD. Of course, the proper startup action and layer break placement, and other parameters are probably out of whack, too (not your fault, you're new), and none of that information is in the manual.
    It was good to meet you, Stephen and hello everyone! I've been "kinda busy", as they say the last year. Still 7 days a week in everything DVD and Blu-ray, but I do check in from time to time.
    Take care,
    Trai
    Trai Forrester
    New Constellation Technologies
    Doing DVDs Right, every-time (and 'freaking-out' good newbies as somewhat of a hobby? ).

  • Why do some photos appear white or partly white?

    I have several thousand photos and i want them all to be available on my iPad.
    After syncing several of them are partly or completely white some with only a narrow band of the photo appearing at the top.

    What videos? You may be viewing some very low-resolution videos.

  • Why do some Podcasts appear on the iPhone in different locations?

    I subscribe to six podcasts in iTunes.
    When I sync to my iPhone, four of these appear in iTunes>Podcasts and the other two appear in Videos>Podcasts.
    (a) Why don't they all appear in the same place?
    (b) How can I make them all appear in the same place?
    (Originally posted to Apple Support Communities > iPhone > Using iPhone > Discussions and reposted here on advice)

    I don't know who advised you to repost this here, but I'm afraid I can't help you. I don't have an iPhone, and this isn't a 'creating podcasts' problem, the topic of this forum. It's always possible that someone might chip in, but you would be better off in the iPhone forum and possibly the iTunes forum.

  • Why are some messages marked as duplicates in Mail?

    I added my Yahoo! account to Mail but there is a problem with the Sent mailbox. Some messages (as many as 22 at a time) are being marked as duplicates of each other even though they have absolutely nothing in common (other than the sender). I've already tried rebuilding the mailbox; but it produces the exact same result. Any ideas?

    chc94 wrote:
    I was going through my iPod cover flow and noticed the same thing. THEN I saw that one album was listed as "Steers And Stripes", another was "Steers and Stripes" and yet another was "Steers & Stripes".
    So - check how they are labeled in the iPod. I went back to my iTunes library and there is only one version of that album in the computer. Haven't figured out how to bring it to ONE on the iPod, though.
    Work carefully through each of the sections of my article at http://samsoft.org.uk/iTunes/grouping.asp - the solution will be there.
    tt2

  • Why do some emails appear in Intenet Explorer but not on Firefox?

    My friend sent an email using a program in which she used her handwriting for the fonts. The email appears clearly when I use Internet Explorer but all that arrives when I use Firefox is a blank page although her name appears in the Inbox. I can't open some emails that require media player, either.
    Fafing

    Firefox doesn't do email, it's a web browser.
    If you are using Firefox to access your mail, you are using "web-mail". You need to seek support from your service provider or a forum for that service.
    If your problem is with Mozilla Thunderbird, see this forum for support.
    [http://www.mozillamessaging.com/en-US/support/] <br />
    or this one <br />
    [http://forums.mozillazine.org/viewforum.php?f=39]

  • LMS 4.2.3 Topology Services Why do some links appear as "Ethernet"?

    Some of the llinks between switches in VTP Domain Topology View appear as think lines and are labeled "Ethernet1000M":
    I've checked the interface configs many times, and both ends are Dot1Q trunks.  I suspect it has something to do with the middle switch, but can't find anything unusual in its config.
    When you hover over one of the other links, a popup tells you the IP addresses of both switches, the interfaces involved, and the media type and speed.  When you hover over the link before one of the highlighted links, a popup tells you only the IP address of one of the switches, the interface involved, and the media type.  It's weird, I don't like it,and I'd like for the links to be uniform throughout the topology view.
    Any ideas on how I can do this?  Is it an IOS problem? 
    Thanks,
    Chris

    Any chance you are passing through a non-Cisco L2 switch on those links? I've seen this behavior is that case,

  • Why have some apps on my Ipad turned into a grey box with lines in it?

    3 apps on my ipad have turned from icons into grey boxes with lines in them. When I click on them, they try updating but it doesn't complete. What's going on here? Is this some kind of virus?

    Not a virus. More like a glitch. When mine did that all I needed to do was to open the apps and the icons reset.
    If you won't lose any game progress or the such, you could try to delete and then redownload the apps.
    If you're having issues downloading the apps, try to go into the settings, iTUnes and app store, sign out and then sign back in.
    The app store has been a bit wiggy lately. I've had some issues downloading apps or updates and it's not on my end, it's on Apple's end. Which, unfortunately, means there's not much a user can do but wait for Apple to fix it.

  • Why have some icons become blank in iphone3 (used as iPod)?

    Using an iphone 3G as an ipod - some of the app icons are blank although still launch the app when tapped.  The name of the app is still visible.  Is there a solution for this?  Thank you

    Try the following:
    - A reset. Nothing is lost
    Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Make sure the apps are in your iTunes library and then sync
    - Restore from backup
    - Restore to factory settings/new iPod.

Maybe you are looking for