Why have they got rid of the ethernet port on the new MBP?

What about 1st time TM backups, 11 hours for 80GB even with the $35.00 adaptor you are foced to buy! Why doesn't the TM have a Thunderbolt port?

Axeman,
Thank you for your prompt feedback and correction, yes of course i mean the actual time capsual. There are many people experiencing big issues with the first backup onto the TC, its recommended by many not to do your first backup via wireless as it often fails, therefore with my old MBP if I had large differences in my last backup and the latest backup I did via ethernet. Now i have to by an ethernet adaptor for $35.00 and still it takes 10 hours for 80GB initial backup.
James

Similar Messages

Can I use the Airport Express to connect to a Linksys Wireless Network and then use the Ethernet port on the Airport for a wired connection to a device for internet access? Would I be able to then also use that Ethernet pt to a Ntwk Hub for more wired c

Thanks for the help. Looked but not clear on what I am trying to do as being possible. Can I use an Airport Express to connect wireless to a Linksys Wireless Router, such that I can then use the Ethernet ports on the Airport to either connected to a PC wired, or even use a hub off the Airport Express to allow multiple wired connections to it?
I am not looking to have the Airport Express extend my wireless network, just connect to it and provide me wired connections in a different location from where my Linksys Route is located. Would prefer to replace Linksys with all Apple, but just not possible financially yet. Thanks for the help.

If the AirPort Express Base Station (AX) is an 802.11n model, then yes, you can reconfigure it as a wireless Ethernet bridge. In this configuration, the AX would join the wireless network provided by the Linksys router and its Ethernet port would be enabled for either a single wired device or for an Ethernet hub or switch for multiple devices.

The ethernet port on the thunderbolt display is not working

The ethernet is working when the cable is connected directly to my mac laptop but when connected the thunderbolt display there is no connection. Is there some type of set up for the ethernet connection or can this port just be broken?
Thanks for the help!

Afterthought on an older post: it isn't immediately clear that the Ethernet port on the Thunderbolt Display works through the "Display Ethernet" interface, rather than through the "Thunderbolt Ethernet" interface. The latter was already present in the list of network interfaces in Network Preferences, while the former had to be added via the + button --- at least that was the case when I installed the TB display to work with my 15-inch MacBook Pro Retina this week.
The AppleCare rep didn't know the difference either and agreed with me that it was puzzling that using the Thunderbolt Ethernet adapter on the Thunderbolt port of the display did work, wheras using the Ethernet port directly didn't (even though there were lights flashing on the Ethernet port of that other computer I tried to connect to in Internet Sharing mode). Close reading of the above posts made me go look for that mysterious "Display Ethernet" interface... thank you Clinton!

Can I connect an external hard drive to one of the ethernet port of the airport extreme and access it from my Mac or PC?

Can I connect an external hard drive to one of the ethernet port of the airport extreme and access it from my Mac or PC?

If this hard drive is part of a NAS device, then yes it should be accessable from either a Mac or PC while connected to the AirPort Extreme Base Station (AEBS) by Ethernet.

I have a iMac g4 swivel and it seems that the ethernet port and the optical drive are not working.

Is there any troubleshooting I can try, short of replacing everything?
I really love this version of the iMac and want to use it in place of my eMac for some home business inventory and printing work.
I need the ethernet to work because the printer can only connect that way. It's a great laserjet from HP (1998 version) and it works like a champ.
As for the disc drive... I would love to install office or iwork but as I said nothing seems to mount. I also can't upgrade it to Tiger. It's running Panther and I can live with that I suppose.
I have wondered if I could exchange parts from the eMac (Motherboard, Optical Drive, Hard Drive) since its bulkyness takes up so much room.
Any ideas?
Thanks
And yes I have a modern macbook pro as well.

You can use the dvd drive on your macbook via target disk mode.
"Installing OS X 10.4 'Tiger' on DVD-Challenged Macs Using FireWire Target Disk Mode"
http://lowendmac.com/misc/06/0710.html
1) Do you have a router? Do you communicate to the internet via wifi?
connect the printer to a router with an ethernet port. This will be an input eithernet port.
You may need to change ip addresses on your printer or on your network.
2) usb to ethernet dongle
Apple USB EN Adapter Network adapter - Hi-Speed USB
http://www.google.com/products/catalog?oe=utf-8&rls=org.mozilla:en-US:unofficial &client=firefox-a&q=usb+to+ethernet+dongle&um=1&ie=UTF-8&tbm=shop&cid=1255179391 6678370799&sa=X&ei=L7xdTsDTGsXz0gHdvazcAg&ved=0CF8Q8wIwAw
verify that the dongle will work on your machine. Any drivers needed?
3) You can firewire to for TCP/IP ( ethernet) to comunicate between macs. Connect your printer to your macbook. Use firewire to communicate between macs. Enable printer sharing.

Enable the Ethernet Port on the STB ?

Hi
I have a PC right next to the Verizon STB (the HD one w/o DVR) and I was wondering if Verizon can enable the ethernet on the back of the STB so I can plug in the PC and get it networked w/ the rest of the net ?
Thanks,
HC

AFAIK, the STB should be able to act like a bridge between the MOCA and the ethernet. That's what I am interested in. Anyone thinks it is possible ? Maybe someone from Verizon ?
Thanks,
HC

Resolve the Ethernet Port Issue of New Intel Xserve

Hi all,
I want to get Clarify the Issues in new Intel Xserve 2.26GHz Quad-Core Xeon "Nehalem" processor. The Network Connectivity of Ethernet is Shows Wrong in System Preference. If I Connect the Ehternet in Port 1, the Port 2 also Shows Connected without Pluging the Ethernet Cable in Port 2.
Port 2 is Shows Green When No Connectivity of Port1 and Port2.
I Tried in 3 Xserves with the above Configuration, all the Server Gives the same Issue. I even Formatted and Reinstalled with all the updates but the Problem prolong.
Awaiting your replies/suggestions.
Thanks
R.ELANGOVAN

Call Apple Support for assistance; this looks to be a nasty error with multiple new Xserve boxes and given these are likely covered under their initial warranty, which implies there's something seriously weird with 10.5.6 or 10.5.7, or with the Xserve early 2009 boxes, or firmware, or with what the configuration tools allow.
It appears that [threadID=2021235|http://discussions.apple.com/thread.jspa?threadID=2021235] and [threadID=2021817|http://discussions.apple.com/thread.jspa?threadID=2021817&tst art=0] are the same case?

HT200112 Can I hook up my AppleTV directly from Cable Modem to the Ethernet port on the AppleTV without setting up any kind of network?

I want to directly hook my AppleTV to my cable modem via ethernet port. I am doing this to avoid a slow router. Is this possible?
Thanks,
Brian

Sorry, I tried selecting both "This helped me" on your first response then "This solved my question" on your last response, but it wouldn't let me. Next time!
Thanks again,
Brian

Can I activate the ethernet ports (routing) of Time Capsule "joining" an existing non-Apple wireless network ?

Hello,
I have a DSL modem that is also a WIFI router as my main WIFI network from room A. In room B, I have a TC wirelessly joining the existing WIFI network (not creating a new one). That works fine, I have one SSID, and I can wirelessly access the TC disks and backup my Mac on my TC.
Now, I would like to connect a wired device (with on WIFI) to the ethernet port of my TC. Unfortunately, the ethernet ports of the TC don't seem to be "activated" as they do not have internet on them.
More precisely, I'd like to connect a GE Cordless Skype Phone Model# 31591 (http://www.gephones.com/products/skype/dect-6-0-expandable-digital-cordless-phon e-with-skypetm.html) that connects to a router via Ethernet. I'm aware that I could simply connect it to the DLS router, but that's not what I want... Is there any way to activate the ethernet ports of the TC while in "join" mode ? Or do I really have to buy a Airport Express to create my main network and then extend it ?!?

Thanks, the reason why I asked again, is because you told me to start another thread with the specifics of the device I want to connect, so I did
Not a big deal, and it is easy to become confused.....but to be clear about this
Your question.....
is there a way I can connect my Bluray player to the TC ?
My Answer.....
Please start a new post for that. Tell us the make and model number of the player and whether you plan to connect using wireless or Ethernet.
so I tried to creat the main WIFI network with a first-generation Airport Express M9470LL/A (802.11b/g, no "draft N" or "n" support) and the TC wouldn't extend it either, is it too old/not supported
Unfortunately, the "extend" setup will only work with "n" devices. The older Express does not have a setting to "Allow this network to be extended", so the Time Capsule cannot pick up the signal.
I'm not sure what else to suggest other than what I already have. I'm assuming that you do not want to buy another new Airport Express.

Can I use the Ethernet Port for a computer when it is also used as a wireless network with an Airport Extreme as the access point for the wireless network

Can I use the Ethernet Port of the A1264 Airport Express to connect to the Ethernet port of a computer that does not have wireless capability when the Airport Express is also used on a wireless network with an Airport Extreme 5th generation as the access point for the network?
I have AE 5th gen
looking to buy (from ebay) the AEX A1264
Various computers, printers and hubs for the network
Is this possible to do?

Bob, Thanks for the info. I have read different articles that said yes, but I wanted to make sure before I commit to buy. I have an older A1084 which I could not use the Ethernet port. I know at one point I was able to when I was on 10.4. Now that I am on an Intel processor and 10.8 I am going to have to upgrade some of my Apple wireless hardware.
Thanks Again.

Link Light on the Ethernet port ?

Hi,
Is there a link light on the Ethernet port on the MacBook Pro ? It looks pretty dark to me ;-(
MacBook Pro Mac OS X (10.4)

No I have a feeling it's a 2-bit ethernet card, not a gigabit one.
I just opened up the box yesterday. I thought the
world of Apple was going to be better.
I am going to locate an Apple Store next week to see
see what their repair calendar looks like.

Airport express and the ethernet port

Since January, I've had my older g/b model of airport express set to "join the network," which is an 802.11n airport extreme connected to my cable modem. Until last week, the ethernet port of the airport express could be used to connect in my DVD player or TV. I could do software updates on the DVD player, and watch youtube on the TV, etc. The connection became slow last week, so I decided to reconfigure the airports. Since then, the ethernet connection to the airport express is no longer recognized.
Please note, although the airport express is not an "n" model, this set-up did work just fine! The DVD or TV was automatically able to display my IP address. The express has a green light, it has no errors in Airport Utility, and AirTunes still works just fine — it's only the ethernet port that has become completely inactive.
Any thoughts?

Not sure how you managed to do this with an 802.11g AirPort Express unless you had it configured to extend the wireless range of the 802.11n AirPort Extreme in a WDS. As far as I know, the ProxySTA (wireless Ethernet bridge) capability is only available with the 802.11n Express.

Can I use the ethernet port ....

Can I use the ethernet port on the ATV to connect my blue ray p[layer to the internet using the ATV as a wireless card??
If so how??

I might be next in line on the airport extreme! Right now wireless is working better since the latest upgrade to iTunes, but hardwire is the way to go. Only problem is that ISP connections is in my office and my Home Media is downstairs. I was thinking of setting the Airport Extreme as a repeater in order to access ISP and then used the ports in the back for iTunes and ATV.

Can Slingbox solo be plugged into the Ethernet port on airport express to connect to network?

Slim box requires a wired connection to your network unless you purchase their sling link to create a wireless connection through your home electrical outlets. Can an airport express be used instead? Would the sling box plug into the Ethernet port on the express or though the USB port.

It may be possible as the 802.11n AirPort Express can be configured to enable its Ethernet port for wired clients in one of two methods: 1) The Express is extending another AirPort, or 2) The Express is configured as a wireless Ethernet bridge.

Multifunctional on ethernet port of the airport extreme

Hi
I'm desperately seeking a solution to be able to scan with a multifunctional that is connected through the ethernet port of the airport extreme. Printing works fine from any mac in the network, but scanning does not; not from the multifunctional, not through programs such as adobe photoshop (TWAIN). In Adobe, choosing import, the multifunctional is listed, but when trying to connect a dialog appears saying that the machine is not ready.
Please can anyone give a tip ?
Thanks
Jan

If this hard drive is part of a NAS device, then yes it should be accessable from either a Mac or PC while connected to the AirPort Extreme Base Station (AEBS) by Ethernet.

Why have they got rid of the ethernet port on the new MBP?

Similar Messages

Maybe you are looking for