Why HDV capture in FCP 6.0,3 is not as clear as original footage?

I have tried several capture's settings for HDV footage captured in Sony HDR-HC7. Once it is in my computer's hard disk and ready to strt editing it seems that the video is not very clear mainly the edges of moving objetcs look if they were a liitle bit "dreagged". I ve been told in the Final Cut Training course that the defect is only possible to be corrected in Color program . It fact it is reduced a little when the filter "Film Look" is applied but it does not look as good as the original footage. Is there something I should need to do?. Thanks

#2 Blurry Playback
Shane's Stock Answer #2: Blurry playback
ONLY JUDGE THE QUALITY OF YOUR MATERIAL ON AN EXTERNAL BROADCAST MONITOR, OR AT LEAST A TV.
The Canvas shows you what happens after the codec you are working with has been applied. The Viewer shows you the material in its native format. Once you drop the footage from the Viewer into the timeline, it inherits the attributes of the sequence. If it is a DV sequence, the footage will render out as DV.
1. Disable overlays on the Canvas.
2. Make sure you've rendered everything (no green bars at the top of the timeline).
Video playback requires large amounts of data and many computations. In order to maintain frame rate and be viewable at a normal size, only about one-fourth of the DV data is used in displaying the movie to the screen. However, the DV footage is still at full quality, and is best viewed thru a TV or broadcast monitor routed thru your camera or deck.
NOW...seeing that you are working with HDV, the only way you are going to be able to see the actual quality of what you have, you will need an HD capture card and HD monitor. Matrox MXO plus Apple Cinema Display is a cheap way to go, works with laptops. Or if you have a MacPro, then the Decklink Intensity and HDTV would be a good inexpensive choice. other than that...www.aja.com www.decklink.com
Shane
Shane

Similar Messages

I am trying to capture from Sony HDV 1080i VTR FCP giving an error of not able to initialize

i am trying to capture from Sony HDV 1080i VTR FCP giving an error of not able to initialize. I am not able to capture the content in DV mode. i am using a Firewire 800 to 400 converter and a 6 pin firewire cable to connect to the SonyHDV VTR. Please suggest me how do i do this.

The 800-400 converter plugs have proved a problem for this. What version of the software are you using. It sounds like an older version of FCP, if so you should ask your question on the Final Cut Studio forum.

Unable to capture in FCP, Quicktime and iMovie, camera not recognized.

I am unable to capture in FCP, Quicktime and iMovie.
I have been dealing with this problem for quite a while now, and I think I have tried everything posted on these forums regarding this issue. I have been to the Quicktime, iMovie, and this FCP forum looking for the solution. Hopefully someone has a suggestion that I have missed or have not tried yet. I have a Powerbook G4 running OSX Tiger 10.4. I am running Quicktime 7.04, and FCP 4.5.
My problem is this… I am unable to capture from my Canon ZR-200 Mini DV camera, using Final Cut Pro, iMovie and also Quicktime. FCP says no camera recognized. iMovie says no camera attached, and Quicktime says no recording device found. In FCP, I am using the Firewire Basic setting, and NTSC DV settings. I have captured in FCP with the same camera several times in the past. I think the problem started when I upgraded to OSX 10.4, or one of the Quicktime upgrades.
Here are the details…
- Camera is connect via Firewire. I have tried the built in ports, as well as a Firewire Carbus card.
- OSX recognizes the Canon ZR-200 in the System Profiler, so I know the computer sees the camera.
- I have tried the camera on a Windows XP machine, and capture works perfectly, so I know the camera is functioning properly in VTR mode.
- Deleted my FCP pref’s using FCP Rescue.
- Deleted the Quicktime receipts, and re-installed Quicktime 7.04
- Reverted back to Quicktime 7.01
- Set the audio to 44.1 in the the Audio MIDI setup in the Utilities folder
- Tried the “GarageBand” fix, opening the programing, playing a few notes and closing.
- I have installed Quicktime using the program “Yank” to completely delete Quicktime and re-install.
I may have tried more solutions, but these are the fixes that I can recall.
If anyone has any others suggestions, it would be much appreciated.
Brent

Hi Brent:
Although it looks as if you have tried all of the 'fixes' that are normally suggested here, please read through this Apple Article to see if some obscure thing applies to you.
iMovie: Cannot see or control camera
http://docs.info.apple.com/article.html?artnum=43000
Sue

Hi,I am new to I pad. Why are the pictures taken from I pad is not as clear

Hi,why are pictures taken on the I pad not as clear? I am new to I pad.tks

Because the camera on iPad was designed to accommodate Facetime. By the numbers, tells you why. The rear facing camera is 1.3 Megapixel. The front facing camera is .7 Megapixel. In contrast, iPhone includes a 5 Megapixel camera and if you haven't looked at point and shoot or DLSR camera's these days, they all start at 10 Megapixel. The reality is, iPad camera was never intended to produce camera quality pictures. In bright light it can take an acceptable picture, but in less than bright light, it is marginal at best.

Broken Timecode during capture in FCP 5.04 Tape does not have broken time?

I am trying to capture video froma mini dv canon camera and fcp is telling me that there is broken timecode. I have checked it with imov with no problem and when I view the tape there is no broken timecodde? can anyone help
Thanks
joe

iMovie does not use timecode.
Canons are notorious for weak timecode and firewire support. Try capturing the tape using another DV player.
x

Fcp 7 hdv captured clip turns into text file

Would anyone know why hdv clips captured using prores 422 are coming in as a text file?? In the browser info fields under creator they indicate "textedit" and also appear in the capture scratch folder as text files (with no quicktime logo). However, they will play in the viewer and timeline.
If I "get info" on them in the capture scratch folder they are listed as plain text and won't open with qt. If I add .mov to the end of the file they then indicate a qt file and will play.
All of this is using fcp 7, QT 7.6.2, and only trying to capture hdv. SD is fine.
When I switched to another drive and opened 6.0.5 and tried the same thing, same easy setup, etc., they come is as quicktime as they always have.
Am I missing something? Is this enough info to get any advice?

Hi Michael
Capturing in ProRes is an unusual workflow, most people don't have a clue about it. I would suspect that's why we don't have very many people complaining about the problem just yet. I upgraded to FCP 7 shortly after it's release, and upgraded to Snow Leopard the day after it came out, but haven't needed to capture any additional projects until now. I wish I would of captured some footage between upgrading to FCP 7 and Snow Leopard so I could possibly isolate the problem and or distinguish which upgrade may be causing the problem. I would expect we'll start to see or hear of more people having the problem soon. I haven't looked in any of the other forums, i.e. Creative Cow or anywhere else to see if this problem has been reported elsewhere, but I'll do so and get back to ya.
No, I didn't preform a clean install of the OS and FCP Studio, I installed the upgrade the way is was written and intended to be installed, as an upgrade. I've never captured HDV in any other format other than ProRes from day 1. I tell you what, why don't YOU try to capture in ProRes and see what you come up with, before you start suggesting to people that they should reinstall their OS and NLE from scratch. No I didn't do a clean install, but what difference should that make? That's a whole lot easier and quicker said then done pall! No offense, but it totally irks me when that's the first thing people what to suggest, it's such a PC/Windows mentality!
ProRes is Apples baby, it's not some 3rd party format I've chosen to use in the place of the standard that Apple has provided us. What kind of "system hacks" or you implying? No I haven't installed ANY system hacks! Editing video is my bread and butter, I've spent an awful lot of money purchasing the software/hardware that I need to do my job (i.e tools of the trade) not to mention the countless hours to learn how to to it properly and I certainly don't feel that I should have to look for work-arounds which require me to rename hundreds of captured files to simply add the file extension of .mov to make the software which I've spent so much money for to work properly!
So please, capture some ProRes 422 files and then get back with us okay? Thanks!

Can't use HDV quicktime .mov files (captured in FCP on a mac at work) on PC

Hiya everyone!
I've taken some work home from the macs at work, but can't open it on my PC.
Footage was captured in FCP on a mac at work, HDV quicktime .mov, but won't open in the newest quicktime, windows media player and more importantly in Adobe After Effects CS3 or Premiere Pro CS3 on my PC at home.
When I try opening the files in quicktime, the screen is white, but the audio plays. They don't open in windows media player at all. When I try to import them into Premiere, I get a message reading, "Error Message, Codec missing or unavailable". But they import into After Effects, except they only play as white...
I've tried converting them into almost everything, and they often play (as .avi for example in the newest QT, WMP, Adobe Premiere and AE), but they increase A LOT in size and decrease A LOT in quality.
The HDV files that won't open read as:
Source: *.mov
Format: HDV 1080i50, 1920 x 1080, Millions 16-bit Integer (Little Endian), 48.000 kHz
Movie FPS: 25.00
Playing FPS: (Available when playing)
Data Size: 69.53 MB
Data Rate: 28.10 mbits/sec
Current time: 00:00:01.64
Duration: 00:00:20.76
Normal size: 1920 x 1080
Current size: 1920 x 1080
Anything smaller than 1920 x 1080 plays fine.
I've been all through google, and the adobe and apple sites, and the best I could find is here:
http://discussions.apple.com/message.jspa?messageID=7753066#7753066
and
http://discussions.apple.com/thread.jspa?messageID=8159317&#8159317
My problem is almost identical to these 2...
No one in the whole world seems to have an answer...
Does anyone here know how I can use the HDV files from the work macs on my PC at home?
-Kaiwin

HEy, I have been looking into this problem... i also wanted to play quicktime files using my pc... The last thing i tried was downloadiing these codecs
1)apple pro res *for pc
2)mpeg 2 codec for pc
I have HDV files captured on a Mac G5 they are 30p 720,
I think i am close to solving the problem because: before installing the codecs i couldn't see the video and only audio.. but now i open it and i can see the video partially... here are my screen captures....
anyone interested in getting this solved???,... i would also like some help in importing m2t files from VLC player to HDV split where they can be read and edited. Thank you.
Ultimately my goal is to be able to edit these HDV files directly and export them back out with good quality.. because my only editing choice right now is Windows movie maker.
this is an error i got from the HDV split program. Its supposed to read m2t files..

It is possible to capture 1920x1080 instead of 1440x1080 from a HDV camera in fcp ? If do, plz also says the pros and cons.

It is possible to capture 1920x1080 instead of 1440x1080 from a HDV camera in fcp ? If do, plz also says the pros and cons.

And it's easy enough to change to square pixels within the editing application.
Russ

Why don't iMovie support native HDV capture and editing?

i would like to see iMovie HD 6 to support native HDV capture and edit. is it possible?

no, FCE-HD (what an abreviation!) uses the same trick as iM-HD, converting HiDef into AIC....
native HD is really more for the pros... yet! I think, the basic problem to be solved first is -r media, meaning, any HD/blue-ray-DVD-r disks, which make it possible for the average user to store his/her products.... but as far as I follow the discussion, right now the industry is caring more for commercial disks, and that HDMI "problem" (broadcasting can include a copyprotection, so no use of any HD/DVD HiDef recorders...!)... finally, we can record only our selfmade movies... maybe that's a little less joy...
actually, converting finished HDmovies into h264 with a high bitrate and storing that onto hd is the only realistic option........

HDV capture card

I'm looking for a capture card that support HDV camcorders, for G5.
But it seems that doesn't exist any card: I found only HD or SD capture cards.
The only HDV capture card that is able to native editing hdv video in realtime from hdv camcorders is the canopus EDIUS NX (and canopus velxus 300 in Japan); but the problem is that canopus hdv card is only for PC.
I called canopus and they said me that these cards will be for MAC when Apple will release the new powermac intel-based.
So I read in the apple FCP 5 HD page this:
"Native HDV Support
Final Cut Pro 5 supports native long-GOP MPEG-2 editing for working with camera-original HDV video. Unlike other solutions, Final Cut Pro 5 acquires HDV media via FireWire and keeps it in the original format, transferring it into the system without any generation loss. Output via FireWire back to an HDV camera or deck, or transfer your native HDV to DVD Studio Pro 4 for an end-to-end native HDV workflow."
I know that it is not possible capture a video by firewire from a camcorder without further compressing it. I know that it is for this reason that pro use capture cards (that have dedicated processors for this).
So I think that there aren't HDV capture cards for mac because the hardware companies don't make new cards for only few months, so they're waiting the new intel-based macs. If so, this firewire technology of final cut pro 5 is a compromise for these last times, or is it really like the capture-card processing? and if so, how is it possible capturing a hdv video by firewire without further compressing it?
Do you know about a HDV card for MAC or is it really good using Final Cut Pro HD 5 with firewire ?
Thank you.

It all depends on what type of work you are doing...
Capture Cards are for use with other formats that cannot be captured via firewire: BetaSP, Digibeta, HDCAM, D5. They are also require for outputting to these formats.
Not many broadcast facilities will take a DVCAM master...some will, but most won't. And depending on your client, they may or may not take an HDV master. They may want an HDCAM or D5 master if they are producing HD content. For that you need a capture card and high speed drive RAIDS.
Why do other pricier systems come with capture cards? Because they are sold that way. FCP, out of the box, is ready to edit DV, DVCPRO 50, DVCPRO HD and HDV...FULL RESOLUTION...no compression. Any need to do higher end requires a capture card.
Shane
"There's no need to fear, UNDERDOG is here!"

HDV capture sound monitor......

I've read all of the previous posts on this issue, but I am still wondering if anyone has found a solution for turning off the sound monitoring when capturing HDV footage into FCP.

Yeah, I know the potential is there for causing interruptions during capture, but since I'm still a small enough operation - this is my only choice. I have been capturing footage for years while simultaneously using the machine for light tasks and have never once had any issue with the subsequently captured footage. The point is, I can't use my one machine to capture 5 hours of footage and not have the ability to get other work done during that time. I don't know why, all of a sudden, FCP doesn't give you the option to mute the monitoring sound during HDV capture via firewire - all I know is I would certainly appreciate it if someone had any way to make the sound go away. Thanks.

5.1.4 update breaks HDV capture? Unable to Initialize Capture Device

Problem:
Final Cut Pro cannot capture standard 1080i60 HDV footage from Sony FX1 camcorder. FCP reports "Unable to Initialize Capture Device" when the log and capture window is opened. However, the footage CAN be captured in iMovie (which is interesting, and unacceptable). When HDV>DV downconvert option on camcorder is activated, footage CAN be captured as anamorphic SD, so the camcorder and FW do work.
The problem is occuring on a rock-solid FCP system that I use on a regular basis (mainly for SD editing). It has been approx 2 weeks since I last attempted a HDV capture, the system has been working great with SD footage (still does).
Factors that have changed to my knowledge since HDV capture was last functioning properly:
*Added a new external FW drive into regular usage (a different brand than normally used, no issues with it so far).
*Updated FCP to 5.1.3, and then 5.1.4 when that fix came out. All SD captures and work have been fine so far.
Here's what's interesting...I had a copy of the FCP v5.0.4 .app that I had saved an archive of prior to the crossgrade update. Guess what? I can load it up, and it captures HDV without any problems! With that in mind, this looks like an FCP 5.1.4 issue. But I am at a loss on how to proceed further in troubleshooting. Many thanks in advance for any assistance.
Matt Jeppsen
FresHDV.com
---NOTES---
What I have tried:
*Attempted capture with a different Sony FX1 camcorder.
*Swapped firewire cables and system firewire ports.
*Attempted capture with camera FW chained to an external HDD.
*Unplugged all other external firewire devices from the system.
*Trashed FCP prefs using FCP Rescue 5, created new project using Easy Setup (for HDV).
*Tried different variations of FCP A/V settings, tried all the HDV FW device control presets and the HDV AIC capture preset.
*Per instructions at http://docs.info.apple.com/article.html?artnum=301852 I removed the numbered Quicktime pckg Receipts and re-installed the latest version (7.13). Post-install/reboot, I repaired Disk Prefs and Verified the disk using Disk Util.
*Have also attempted installing QT 7.13 2 and 3 times in a row, also trying disk prefs repair BEFORE the post-install reboot.
Final Cut Pro Audio/Video Settings:
Sequence Preset: HDV-1080i60
Capture Preset: HDV
Device Control Preset: Sony HDV Firewire
Sony HDR-FX1 IN/OUT REC settings:
*VCR HDV/DV: HDV
*COMPONENT: 1080i/480i
*i.LINK CONV: OFF
*TV TYPE: 16:9
*A/V->DV OUT: OFF
System/Software Facts:
*Final Cut Pro 5.1.4
*Quicktime 7.13
*PPC Mac G5 2.7 Dual (2.5GB RAM)
*35GB free on System, 45GB free on internal FCP Scratch disk
Final Cut Pro 5.1.4, G5 DP 2.7 (PPC) Mac OS X (10.4.8)

I think I figured out this vexing problem. I too was having the same issue. Check to see that your Quicktime is newer than 7.1.2. If it isn't you'll have to upgrade it. I only upgraded to 7.1.6 here because I was afraid of going to a really new version. http://www.apple.com/support/downloads/quicktime716formac.html. After I upgraded my quicktime, I ran software update and the Final Cut Pro 5.1.4 update appeared. I hoipe this helps.

Aspect Ratio HDV clip from FCP to After Effects

Can someone help me with exporting from FCP an HDV clip to After Effects? What I am doing is trying to export an HDV clip from FCP to AE but when I import it into AE the aspect ratio is all off. I have an HDV 1080i50 easy setup timeline and I am exporting from that as a quicktime movie (not conversion) with the current settings. When I bring that into AE I have a HDV comp set up and I drop the FCP movie into that comp. My FCP movie is 1920 X 1080 and is bigger thant the AE HDV Comp. Why? Shouldn't the sizes be the same since they are HDV? Please help
Tim

HDV is 1440 x 1080 native so if you have output from FCP that is 1920 x 1080 it is being misinterpreted by AFX.
Try creating a new comp in AFX using the HDV easy setup but set the frame size to 1920 x 1080 manually and see what that does.

Capturing "Now" FCP automaticly making multiple clips

When capturing "Now" FCP is cutting a single clip into multiple clips during capture, on its own. Any suggestions?
HDV 1080i60
G5 Mac OS X (10.4.4)

Hi,
it does seem unlikely, but sometimes FCP breaks up continuous shots when working with HDV. Most of the time, this happens towards the end of a shot, so I end up with 3-4 seconds of the first shot.
Very rarely, that happens with MiniDV, too. The TC seems to be fine, but there may be minor problems, and FCP seems to be a bit picky when it comes to that, so you get a TC break when (at least on your deck) there seems to be a continuous TC. And HDV is even worse than DV. But that's just my own experience. Maybe its as simple as your playhead being clogged up?
Cheers,
Colin

JVC HDV Capture settings + Hardware advice for HDV capture

We have 6.02 FCP Studio2. We shot JVC HDV 720 60P footage (1280 x 720) and are trying to capture thru FCP. We have the JVC GY-HD200U camera and the JVC BR-HD50 outboard deck. Other than the AJA HD 422 device, what are my options (hardware and software) to capture with Log & Capture in FCP? I need In/Out points of course.
JVC HDV says it has a great HDV workflow in FCP, but they don't tell you how (at least where we have looked on their website)
Unfortunately, Blackmagic's Intensity Series cannot control the devices via the HDMI link (One HDMI output is on the JVC BR-HD50 deck). We thought that might work.
Can anyone give us advice on the settings in FCP to control our HDV deck or Camera? We would prefer to keep everything digital, via firewire
Thank you everyone for your help. I did search for this topic and found nothing. I am sorry if this has already been covered...

Connect your deck or camera via firewire to your Mac, and then select the easy setup in FCP's FCP menu that matches the format you've shot. I'm pretty sure for a device control setting either your camera or deck would use HDV Firewire Basic as a device control setting. Other than that it should use the stock preset for the format you've shot.
Jerry

Why HDV capture in FCP 6.0,3 is not as clear as original footage?

Similar Messages

Maybe you are looking for