Why Hide Caption addon is closed ?

I would like to know why the Hide Caption addon : https://addons.mozilla.org/en-US/firefox/addon/9256/ is closed by administrator ? Is it a security issue ?
Because I'm currently using it and it works on Linux !! It doesnt required specific desktop theme like Hide caption (smart) plus.

The subtitle only appears in the begining of the movie during the scene with the russians. The issue has been fixed where the subtitles appear doubled. Just a simple redownload from the cloud is needed. Make sure you delete the copy in the itunes library before redownloading. Heres the email I got today:
Dear iTunes Customer,
Thank you for downloading the movie The Avengers. Unfortunately, the movie you received may have had issues with the subtitles. We have corrected the problem and a new copy is available to download, free of charge. To receive the new version, please re-download the title from iTunes.
Before downloading the new version, remove the current version:
1) Open iTunes on your computer.
2) Click on your Movies library.
3) Click the movie to select it, and press the Delete key.
4) Click Delete Movie and then click Move to Trash.
To download the new version:
1) Sign into the iTunes Store.
2) Click Purchased on the right side in the iTunes Store under the QUICK LINKS section.
3) Click on Movies and select the movie you want to download.
4) Click the Cloud download icon to download the movie.
You will now have an updated version of the movie in your Movies Library.
To delete and download the movie from other devices, seehttp://support.apple.com/kb/HT2519.
Sincerely,
iTunes Store Team
http://www.apple.com/support/itunes/ww/

Similar Messages

A bug in Hide Caption Titlebar Plus (2.4.x) causes browser borders to toggle and window content to jump and no addon setting affects this. Can I do anything to fix this except disable the addon?

Hide Caption Titlebar causes the window content to be displaced when mousing over certain areas and controls. These areas includes mousing over the left window edge as well as leaving any control on the topmost area (buttons, location bar, search bar or tab).
When this happens the window content is shifted right and up, approx 10 and 5 pixels, respectively, and a border to be displayed around the full inside of the window area, overwriting existing contents, the border being thicker to the left and bottom, and thinnest to the top. This border disappears after about half a second and the content is shifted back to its original position.
This bug has followed me since FF4 and only disabling the addon makes the glitch go away.

http://ww2.cs.fsu.edu/~rosentha/linux/2.6.26.5/docs/DocBook/libata/ch07.html#excatATAbusErr wrote:
ATA bus error means that data corruption occurred during transmission over ATA bus (SATA or PATA). This type of errors can be indicated by
ICRC or ABRT error as described in the section called “ATA/ATAPI device error (non-NCQ / non-CHECK CONDITION)”.
Controller-specific error completion with error information indicating transmission error.
On some controllers, command timeout. In this case, there may be a mechanism to determine that the timeout is due to transmission error.
Unknown/random errors, timeouts and all sorts of weirdities.
As described above, transmission errors can cause wide variety of symptoms ranging from device ICRC error to random device lockup, and, for many cases, there is no way to tell if an error condition is due to transmission error or not; therefore, it's necessary to employ some kind of heuristic when dealing with errors and timeouts. For example, encountering repetitive ABRT errors for known supported command is likely to indicate ATA bus error.
Once it's determined that ATA bus errors have possibly occurred, lowering ATA bus transmission speed is one of actions which may alleviate the problem.
I'd also add; make sure you have good backups when ATA errors are frequent

When I open logic express 8 with eyetv open but not active and i close logic express 8 and make eyetv active it won't show closed captioning even though closed captioning is turned on

when I open logic express 8 with eyetv open but not active and i close logic express 8 and make eyetv active eyetv won't show closed captioning even though closed captioning is turned on. When I totally close eyetv and reopen eyetv and open a live tv window the closed captioning comes back. I never noticed this with os leopard, Just after i installed os snow leopard. All software is up to date only I think, thanks to apple they droped support for logic express. Thanks for any suggestions.

Does toggling CC off & back on bring it back?
"Try Disk Utility
1. Insert the Mac OS X Install disc, then restart the computer while holding the C key.
2. When your computer finishes starting up from the disc, choose Disk Utility from the Installer menu at top of the screen. (In Mac OS X 10.4 or later, you must select your language first.)
*Important: Do not click Continue in the first screen of the Installer. If you do, you must restart from the disc again to access Disk Utility.*
3. Click the First Aid tab.
4. Select your Mac OS X volume.
5. Click Repair Disk, (not Repair Permissions). Disk Utility checks and repairs the disk."
http://docs.info.apple.com/article.html?artnum=106214
Then try a Safe Boot, (holding Shift key down at bootup), run Disk Utility in Applications>Utilities, then highlight your drive, click on Repair Permissions, reboot when it completes.
(Safe boot may stay on the gray radian for a long time, let it go, it's trying to repair the Hard Drive.)
If perchance you can't find your install Disc, at least try it from the Safe Boot part onward.

Why won't iTunes stay closed??

Why won't iTunes stay closed?

Checkout this http://forums.logitech.com/t5/G-Series-Gaming-Keyboards/G19-keeps-opening-iTunes /m-p/794559
I found out it was my keyboard's software. If you have a different keyboard it may still be the cause.
This worked for me nicely. I can close itunes whenever I want now.

Why does Windows 7 keep closing down Adobe reader?

Why does Windows 7 keep closing down Adobe reader?

Three possibilities
Using Windows Explorer navigate to C:\Program Files (x86)\Adobe\Reader 11.0\Reader, then double-click on Eula.exe and accept the license agreement
Can you open Adobe Reader by itself? If so, try disabling Protected Mode [Edit | Preferences | Security (Enhanced)].
It could even be a malware issue; see http://helpx.adobe.com/acrobat/kb/reader-core-dll-error.html

Why does my ipad1 keep closing out of games and Facebook before I want too?

Why does my ipad1 keep closing out of games and Facebook when I am looking at still playing or checking comments on Facebook? This has been happening more and more frequently.

Try reseting the iPad (different from restarting). Hold down on both the Sleep and Home buttons at the same time for about 10-15 seconds (ignore the red slider button). Keep holding both buttons until the Apple Logo appears. When you see the Apple logo on the black screen, let go of both buttons. Once it powers back up, try your games and Facebook. This "reset" fixes a lot of weird iPad issues.
Hope this answers your question!
~Joe

Why SO Header not get closed automatically after all SO lines get closed?

Hi all :
Do you know the reason, why some SO Header still as Booked Status, even All the SO lines are already closed ?
If I see the Workflow status the SO Header is in Status = Deferred and Activity = Wait
And I can close it manually if I rewind the Activity in the Workflow, but I want to know why the SOs not get closed automatically.
Thank you in advance
Edited by: Daniel on Jan 18, 2011 8:41 AM

Have you scheduled the concurrent request to use Workflow Background Processor to Process OEOH ? What is the frequency? Has it run after the lines got closed?
Also, check the value of the WAIT attribute in the OEOH workflow? By default, it is set to close headers at the end of month.
For more detail please see Note:141919.1 on Metalink.
Also refer to metalink document # 397364.1 which details how to change the WAIT attributes.
Hope this helps,
Sandeep Gandhi

Why Hide Command?

Hi Experts,
Why do we use HIDE command, it consums memory when we hide data.
In place of Hide we can use
1. sy-lisel
2. Get cursor
3. Read line
etc. which don't consum memory.
Please give me reason, where it is necessary.
Regards
Rajiv singh.

HI.
HIDE
The HIDE statement is one of the fundamental statements for interactive reporting. You use the HIDE technique when creating a basic list. It defines the information that can be passed to subsequent detail lists.
You use the HIDE technique while creating a list level to store line-specific information for later use. To do so, use the HIDE statement as follows:
HIDE <f>.
This statement places the contents of the variable <f> for the current output line (system field SY-LINNO) into the HIDE area. The variable <f> must not necessarily appear on the current line.
To make your program more readable, always place the HIDE statement directly after the output statement for the variable <f> or after the last output statement for the current line.
As soon as the user selects a line for which you stored HIDE fields, the system fills the variables in the program with the values stored. A line can be selected
by an interactive event.
For each interactive event, the HIDE fields of the line on which the cursor is positioned during the event are filled with the stored values.
by the READ LINE statement.
You can think of the HIDE area as a table, in which the system stores the names and values of all HIDE fields for each list and line number. As soon as they are needed, the system reads the values from the table.
The example below presents some of the essential features of interactive reporting. The basic list contains summarized information. By means of the HIDE technique, each detail list contains more details.
GET CURSOR
Use the statements GET CURSOR FIELD and GET CURSOR LINE to pass the output field or output line on which the cursor was positioned during the interactive event to the ABAP program.
READ LINE
Use the statements READ LINE and READ CURRENT LINE to read data from the lines of existing list levels. These statements are closely connected to the HIDE technique.
The following program is connected to the logical database F1S.
REPORT demo_list_hide NO STANDARD PAGE HEADING.
TABLES: spfli, sbook.
DATA: num TYPE i,
      dat TYPE d.
START-OF-SELECTION.
num = 0.
SET PF-STATUS 'FLIGHT'.
GET spfli.
num = num + 1.
WRITE: / spfli-carrid, spfli-connid,
           spfli-cityfrom, spfli-cityto.
HIDE:    spfli-carrid, spfli-connid, num.
END-OF-SELECTION.
CLEAR num.
TOP-OF-PAGE.
WRITE 'List of Flights'.
ULINE.
WRITE 'CA CONN FROM                 TO'.
ULINE.
TOP-OF-PAGE DURING LINE-SELECTION.
CASE sy-pfkey.
    WHEN 'BOOKING'.
      WRITE sy-lisel.
      ULINE.
    WHEN 'WIND'.
      WRITE: 'Booking', sbook-bookid,
           / 'Date   ', sbook-fldate.
      ULINE.
ENDCASE.
AT USER-COMMAND.
CASE sy-ucomm.
    WHEN 'SELE'.
      IF num NE 0.
        SET PF-STATUS 'BOOKING'.
        CLEAR dat.
        SELECT * FROM sbook WHERE carrid = spfli-carrid
                            AND   connid = spfli-connid.
          IF sbook-fldate NE dat.
            dat = sbook-fldate.
            SKIP.
            WRITE / sbook-fldate.
            POSITION 16.
          ELSE.
            NEW-LINE.
            POSITION 16.
          ENDIF.
          WRITE sbook-bookid.
          HIDE: sbook-bookid, sbook-fldate, sbook-custtype,
                sbook-smoker, sbook-luggweight, sbook-class.
        ENDSELECT.
        IF sy-subrc NE 0.
          WRITE / 'No bookings for this flight'.
        ENDIF.
        num = 0.
        CLEAR sbook-bookid.
      ENDIF.
    WHEN 'INFO'.
      IF NOT sbook-bookid IS INITIAL.
        SET PF-STATUS 'WIND'.
        SET TITLEBAR 'BKI'.
        WINDOW STARTING AT 30 5 ENDING AT 60 10.
        WRITE: 'Customer type   :', sbook-custtype,
             / 'Smoker          :', sbook-smoker,
             / 'Luggage weight :', sbook-luggweight UNIT 'KG',
             / 'Class           :', sbook-class.
      ENDIF.
ENDCASE.
Reward all helpfull answers.
Regards.
Jay

Why does my app keep closing?

Several of our applications keep closing right after they get initiated. Does anybody know why this happens and how to fix it?

More then likely you dont have any room on your device. You have to check your memory. If it says 0 bytes you may have to delete a couple songs that you dont really want or a lot of unnecessary photos/videos to free up your phone.
Go to: Settings>General>Usage. Then look to see how many bytes of free memory there is. If it says 0 then walla!! Time to delete.
The tricky part is even if you delete a couple it may not pop up in the free bytes that you have freed up any bytes but just know that as long as you delete some stuff to make room there should be that much room. Deleting apps doesnt really work that well but photos and songs work a lot better. This should work, try it and ket me know how it goes!
If not then more then likely your going to have to delete that app and download it again or get a new phone.

Hide the AddOn bar by default

A closed thread on here looks to address a problem whereby the addon bar is open by default:
http://support.mozilla.org/en-US/questions/780650
The solutions related to xmarks, among others, but this can also be caused by academic reference manager plugin Zotero.
To remedy, type "about:config" without the quotes, in your address bar, paste this:
extensions.zotero.statusBarIcon
into the filter bar (selected by default) and change the integer to 0
i would have added this to the thread which, despite being old, is still a valuable resource. If mods can add this, that would be helpful. If not, hopefully this'll be found by people searching, and help them.

Any extension that places content on the Add-ons bar can cause that bar to appear on startup.

Why have my addons suddenly disappeared

So for some strange reason my addons are gone. One day they were there and the next day they were gone. I have no idea what's going on. I've tried to search through many different folders and there's still no sign of any of my addons. So where are they all? Why would they all of a sudden disappear?

Hi brandon236,
did you check
C:\Users\<username>\AppData\Roaming\Mozilla\Firefox\Profiles\<yourprofile>\extensions?
Your add-ons should be there? If not check the firefox profiles folder
C:\Users\<username>\AppData\Roaming\Mozilla\Firefox\Profiles?
Look for other profiles and search in there the extensions folder. May be for some reason you changed your profile?
That's all i can respond to you. Good luck!

Why prompted to save when closing unchanged file?

I open a file because all I want to do is print it. I send it to the printer making no changes. When I try to close the window, I get the "Do you want to save the changes you made" dialog. It's not that big a deal to just hit "return" to choose the default "Save" but it's an extra step and, at times, can be a little annoying.
As no changes were made, why does the 'puter think there were changes made?
Any way to get around this?

When you open a .doc file (or .rtf or .txt or AppleWorks, etc.) in Pages you are not actually opening that file, but creating a new Pages file of the content. This leaves the original file intact. Until you save it as a Pages file (with the .pages extension) you will get the unsaved warning when closing the file or application.

Why has my topic been closed?

Hi.
Recently I've posted a topic in "Multimedia & Games" named "OGS Mahjong" about the game I develop.
It has been closed. Why?
The screenshot featured Arch logo. The description provided the names of packages necessary to install with pacman to run OGS Mahjong.
What have I violated?
Thanks.

I closed the topic.
I understand you sent an inquiry by email to jasonwran, who responded by email with an explanation.
I generally post a message explaining my actions which includes a link to me. I thought I had in this case. Apparently I did not do that this time -- for that I apologize. You deserve a link back to me.
As has been pointed out by ngoonee and by jasonwryan, this was your very first post on Arch Linux and was clearly designed to drive traffic to your site. As such, it qualifies as an advertisement and was handled as such. I must admit, my response would have been different had you an established presence in these forums as opposed to it being your very first post.
The package you posted does not have an installer for Arch Linux and was clearly not designed specifically for this distribution. As Jasonwryan suggested, the way to handle this would be to create a PKGBUILD for your project and submit it to our AUR. Then you would be more than welcome to post on these forums under the community contributions section identifying your package. If you need help creating a PKGBUILD, these forums are the place to ask and I guarantee help will be forthcoming.
These forums are intended to be for the support of Arch Linux. Most forums are technical in nature with a few set aside for some levity. It is an active community with well established norms. It is the job of the moderators deal with issues that fall outside of those norms. We are human and sometimes make the wrong call. That is why we have multiple moderators who communicate off-line with each other. In this case, I've seen no disagreement from my colleagues.
Please consider submitting your package to our AUR and we can move forward from there. We would like to have you as part of our community.
ewaller

Why is firefox crashing or closing on its own, I get plug-in crashes and unresponsive script warnings?

Firefox is closing on its own or crashing for no reason. I've put in at least 4 crash reports a day. I'm also getting plug-in crashes and have sent those reports in. Also, I'm getting lots of unresponsive script warning messages. At first I thought it was Facebook but it is now doing it on GMail so is it Firefox?

I am not sure I did this right. This is what I did: right-mouse clicked on the desktop, whent to properties, went to display properties, went to settings, clicked on advanced tab, and then clicked on troubleshooting tab. There I drug the hardware acceleration slider to the left to disable it, clicked ok twice as directed, restarted the computer and then I couldn't get firefox to open at all, but I went to internet explorer and got on you tube and tried to watch a video, but it crashed again.
So I don't think that worked. I couldn't figure out how to disable hardware acceleration in the Flash plugin, but did it on the desktop instead. Are there different steps I need to take to accomplish this?
Thank you!

Why are my addons no longer showing on addon bar?

I use the Latest BBC News 1.31.1 addon which, until a short time ago, was always present on my addon bar. I have also just downloaded the Watch UK TV 1.46.1 addon, but this does not appear on the addonbar either. Both addons are enabled (and both have been developed by Mike Redrobe).
Does anyone know how to get them to reappear? I have already tried removing and reinstalling, to no avail. The addons have not ended up on the Tools menu, nor are they in the Customise panel. This problem is driving me nuts!!
I have Windows 7 Home Premium and am currently using Firefox 27

Managed to fix the problem myself (I seem to remember doing the same thing when the problem occurred once before):
Go to Tools-->Options-->Privacy. Choose 'Use custom settings for history' ,
and 'Accept third-party cookies' (I don't think it really matters is you check the other options or not).
This has worked for me.

Why Hide Caption addon is closed ?

Similar Messages

Maybe you are looking for