Why Hotmail Doesn't Work Properly Anymore???
Hotmail recently upgraded their look and as a result, it doesn't work properly via my iphone when I use Safari. It tells me to upgrade my web browser to Safari, IE or Firefox, however my iphone has the newest upgrade available...........so what is the fix?
In short, my hotmail doesn't work properly (Doesn't display emails in the preview pane) so I can't check emails essentially.
See the post abut this that you posted in a few minutes ago. Allan has answered the question.
http://discussions.apple.com/thread.jspa?threadID=1786751&tstart=0
Similar Messages
-
Why iMessage is not working properly anymore since i've uploaded the new iOS 6 ??
Why iMessage is not working properly anymore since i've uploaded the new iOS 6 ??
I'm having the same problem. I have a 4th gen 32GB iPod Touch, and since upgrading to iOS6, iMessage has been nothing but buggy. It will work for an hour or so, and then randomly stop working as it won't send or receive messages. There's nothing wrong with my wifi, because that's the same as it was before. I really hope someone knows something to fox this problem. Some people use iMessage for good reasons - it needs to be a reliable messaging service like it was in iOS5.
-
My track pad doesn't work properly anymore I can't click only tap
My MacBook Pro is acting strange. I can't use my track pad properly. I can only tap and when I click it doesn't work properly. Has anyone else experienced this and what you did to fix it. Thanks
My MacBook Pro is acting strange. I can't use my track pad properly. I can only tap and when I click it doesn't work properly. Has anyone else experienced this and what you did to fix it. Thanks
-
Faces doesn't work properly anymore
Has anybody else had this problem? I've got over 3,000 photos on iphoto, around 2,800 of which are in faces. It used to work fine, but recently it doesn't seem to be remembering faces. Now, most of my photos are of my two children, approx 2,000 actually! but it is not automatically asking if the face in the photo is one of them. it's leaving it competely blank. If it kept getting one or the other wrong, i wouldn't mind too much as they do look very similar. But it's not even bothering to try!
This is really frustrating. I thought it would be a good way to sort pictures of each of them, but having to manually put in their names each time is ridiculous. I'm starting to wonder why i bother.
Is this an issue from a recent update? If not, is there a way i can wipe faces and start again in the hope that it will start to work again?
Hoping someone has an answer; thanks in anticipation!!Well, for some reason this phenomenon doesn't occur anymore. I made quite some changes to my application since, so maybe it was my mistake. Sorry.
In any case the language list I meant was the browser's language setting, both on IE and Firefox -
Scrollbars with painting - why this doesn't work properly ?
Hello I written such a small program:
/* Test.java */
import javax.swing.*;
import java.awt.*;
import java.awt.event.*;
public class Test extends JFrame {
private JPanel mainPanel;
private InnerPanel innerPanel; // Panel w/ JScrollPane
private JScrollPane scroll;
private JButton addItem;
public static final int WINDOW_WIDTH = 200;
public static final int WINDOW_HEIGHT = 200;
public Test () {
buildPanel();
add(mainPanel);
setDefaultCloseOperation(EXIT_ON_CLOSE);
setSize(WINDOW_WIDTH, WINDOW_HEIGHT);
setVisible(true);
public void buildPanel() {
mainPanel = new JPanel(new BorderLayout());
innerPanel = new InnerPanel();
scroll = new JScrollPane(innerPanel);
scroll.setPreferredSize(new Dimension(100, 100));
addItem = new JButton("Add an item to JPanel");
addItem.addActionListener(new ButtonListener());
mainPanel.add(scroll, BorderLayout.CENTER);
mainPanel.add(addItem, BorderLayout.PAGE_START);
private class ButtonListener implements ActionListener {
public void actionPerformed(ActionEvent e) {
innerPanel.increase();
innerPanel.revalidate();
scroll.revalidate();
scroll.getVerticalScrollBar().setValue(
(scroll.getVerticalScrollBar()).getMaximum());
public static void main(String[] args) {
Test test = new Test();
class InnerPanel extends JPanel {
int x0 = 50, y0 = 50, x1 = 100, y1 = 50;
public void paintComponent(Graphics g) {
g.drawLine(x0,y0,x1,y1);
public void increase() {
x1 += 50;
setPreferredSize(new Dimension(x1 + 100, y0));
repaint();
}I click for example 5 times on the button and then move the scroll max to the right.
The end of the line should be already visible, but it's not. However it will be,
when you resize the frame just a bit.
Now when I try to move scroll max to the left but the beginning of the line doesn't show up. However it will , when you resize the frame just a bit.
Can anybody point where I made a mistake ?Not sure I understand the description of the problem. I didn't notice any change in painting when I resized the frame, but anyway I made the following changes to help with the painting:
import javax.swing.*;
import java.awt.*;
import java.awt.event.*;
public class Test6 extends JFrame {
private JPanel mainPanel;
private InnerPanel innerPanel; // Panel w/ JScrollPane
private JScrollPane scroll;
private JButton addItem;
public static final int WINDOW_WIDTH = 200;
public static final int WINDOW_HEIGHT = 200;
public Test6 () {
buildPanel();
getContentPane().add(mainPanel);
setDefaultCloseOperation(EXIT_ON_CLOSE);
setSize(WINDOW_WIDTH, WINDOW_HEIGHT);
setVisible(true);
public void buildPanel() {
mainPanel = new JPanel(new BorderLayout());
innerPanel = new InnerPanel();
scroll = new JScrollPane(innerPanel);
scroll.setPreferredSize(new Dimension(100, 100));
addItem = new JButton("Add an item to JPanel");
addItem.addActionListener(new ButtonListener());
mainPanel.add(scroll, BorderLayout.CENTER);
mainPanel.add(addItem, BorderLayout.PAGE_START);
private class ButtonListener implements ActionListener {
public void actionPerformed(ActionEvent e) {
innerPanel.increase();
// innerPanel.revalidate();
// scroll.revalidate();
scroll.getVerticalScrollBar().setValue(
(scroll.getVerticalScrollBar()).getMaximum());
public static void main(String[] args) {
Test6 test = new Test6();
class InnerPanel extends JPanel {
int x0 = 50, y0 = 50, x1 = 100, y1 = 50;
public void paintComponent(Graphics g) {
super.paintComponent(g); // added
g.drawLine(x0,y0,x1,y1);
public void increase() {
x1 += 50;
setPreferredSize(new Dimension(x1 + 100, y0));
revalidate(); // added
// repaint();
} -
I upgraded ti Lion 10.7.2 for icloud but it's causing other problems with my mac. My Safari doesn't work properly anymore. Wishing I didn't upgrade, anyone know how to fix this or do i just have to uninstall? Thanks,
Wipe the drive clean and install Snow Leopard from your install disk.
Might be less work fixing Safari. Try Resetting Safari. -
After las update (9.2.1) some menus doesn't work properly. Ther is non possibility to use mouse. Why?
Operating System?
-
Why does my n81 doesn't work properly in Vodafone ...
Why does my n81 doesn't work properly in Vodafone Live?? I can't download....etc
Hi,
I'm sorry to hear that you're having problems downloading from Vodafone Live.
If you're able to access the pages of Vodafone Live then the settings in your handset are correct else you wouldn't get that far.
It's possible that there's a problem with your account that’s restricting you from downloading which will need to be looked into. Rather then transferring your account details on the forum would it be possible for you to contact me via email by completing Vodafone Online Contact Forum following the link below.
https://online.vodafone.co.uk/dispatch/Portal/appmanager/vodafone/wrp?_nfpb=true&_pageLabel=Page_Hel...
Please fill in all the fields and include the code FIT135 to ensure that the email is directed to the forum Team.
As soon as we receive your email we can look into this further for you.
I look forward to hearing from you.
Techgirl
Vodafone UK -
Satellite Pro L20 doesn't work properly with USB Fast Track audio i.f.
Hello!
I have used my Fast Track USB on new Toshiba Satellite L40 and I never had problems with it. I could set low latency and I did few songs with it.
Yesterday I bought another notebook, thinking of home recording studio. It's used Toshiba Satellite Pro L20. It doesn't work properly with my interface. When I listen music on Winamp or do anything on Fruity Loops I hear loud clicks, pops, noises. They introduce samples, or they appear during playback or after a sample is stopped.
I noticed, drivers for Satellite Pro L20 are a problem. Its not supported by Toshiba anymore?! The only drivers for chipset are very old and you can download em only from Toshiba website. The chipset is ATI Xpress 200M. Its drivers are with graphic card. Recently I noticed you can download "ATI Catalyst Legacy Display Driver for Windows XP - Motherboard/IGP Drivers 9.11" and CRACK IT to make it possible to install on mobile unit such as L20. Yep its funny but its impossible to do otherwise!
things I have tried and they still not help:
# drivers replacement, original were released in 2004. I installed recent version.
# driver settings, low latency, high latency
# asio and different settings
# pluging the interface to another usb socket.
# trying what happens when I use battery and when I use adapter
# updated bios
# turned off onboard units such as wifi card, sound card
# checked IRQ list
pops still appear.
my config:
Toshiba Satellite Pro L20
Win XP Home SP3
Celeron M 1,5GHz
896Mb ram
M-Audio Fast Track USB, drivers: 6.0.2
Kind regardsThanks for answer. I still have L40 but I try to run my homerecording on L20. The L40 is now used by whole my family. It's possible to swap them but there's a problem - L20 has Norway keyboard and I'm the only person at home who doesn't often look down while typing. In Poland, we use standard ms keyboard. I'd buy special stickers, it's about only to make special chars get back to their places.
I installed Windows on this computer end set it to best performance possible.
Since I created this thread, guys from M-Audio support tried to solve my problem - nothing helped. I think potential solutions are exhausted.
Message was edited by: lidia.pochron -
The cable doesn't work properly when connected as data cable.
Hi,
I have recently encountered problem of the cable. The thing is that if i use it just for charging with the plug, it works fine. But when i wanna use it with computer (i.e., accessing itunes, etc) or with my car, it doesn't work properly, it keeps switching between charging and discharging very fast. I will appreciate your quick support!
Regards,
FarhanJust for all the people to know, I found out the solution. You have to mark the correct side of the charging cable which connects at inlet of the phone. Because this point acts as a chip when used as data cable or auxiliary use (car,etc). That's why it charges with the plug on any side. I don't know what's the frequency of it happening to iphone 5s users, because I bought it recently (iOS 7.1.1) Hope it helps to others in future.
-
Iphone4 doesn´t work properly in 3G mode
My iphone4 doesn´t work properly in 3G mode. Telefon calls break and telefone quality is poor. Internet is mostly not posssible. With 2G both (Telefone, Internet) work. The problem is not that vodafone net is poor because other smartphones work properly at the same location. Telefone calls often break with "no connection" even with 5 sticks. Internet speed is mostly poor, i.E, slower than 2G. It is definitly not a net problem. I think (not sure) the problems occures wit IOs 4.3.3
Thanks for your help Jeffrey,
But
- I checked with several USB audio devices, from different providers. The issue is the same.
- I checked with several applications (Winamp, MediaPlayer, ...). Same issue.
- I checked these devices with different laptops (tried 3 different models) : I have NO PROBLEM.
- The USB devices I use do not need external power supply. I tried EDIROL UA-25 which works perfectly in any case, but not with my TOSHIBA M40.
- I agree that some application can disturb audio management. But in that case, I would like to know which one from the standard installation is the cause, so that I can fire it. It's anyway curious to see that switching from ACPI to Standard mode fixes the issue, as all applications are still there. I would say the applications are not the issue, then.
- All Microsoft updates have already been installed
- I think I tried everything that could be done by closing applications, changing power management modes, system cache, ...
- I have no other hardware device connected/installed (printer or whatever)
- RECORD works perfectly. So if some application layer was disturbing, I would bet it would bother in Play and Record as well.
CONCLUSION : Unless someone can prove it (and I'm ready for some testing), I still believe there's a harware/driver layer that is faulty in the Toshiba management.
And I don't need to contact the manufacturer, as I AM one of them :)
If you are part of the Toshiba support, let me know. Maybe we can investigate together.
FYI : I had to create a new user ID for this forum as it did not accept the one I created this morning anymore :(
Thanks anyway. -
Apple Menu: "Recent Items" doesn't work proper anymore
Hi,
i switched from 10.5.8 to 10.6.4 and recognized that the "recent items" in the Apple Menu doesn't work proper anymore.
While OS X is running everything works fine. When i restart the computer all recent items are cleared.
I want it to behave like it did in 10.5.8, that all recent items where displayed even after a restart.
I recognized that the "open recent" command in applications like TextEdit or Preview behave the same. While the Program is running everything works fine . If I close and restart the app, open recent is cleared.
I tried do adjust it under Appearance in the System Preferences, but if i set all Numbers of recent items to "none" for example and restart the computer it will be set for each (Application, Document, Server) back to 10 again.
Hope someone can tell me a solution because i use "open/ recent Items" alot and it really disturbes my workflow.
Greetz
Djordji
p.s.: I did a quick forum search and did not find any topic about it.
Message was edited by: SPUMDHi Andy,
thanks..i checked the preferences for the com.apple.recentitems.plist and didn't find one.
It seems like the system doesn't write down which items i loaded. I trashed this .plist earlier because i
saw that hint somewhere else.
i did like you said and created a new user account, tested different apps and documents, restarded and everything was displayed proper in the "recent items" Appel menu and in the "open recent" of every App.
I searched in the test account for the com.apple.recentitems.plist, copied it to the preferences of my account and restarted the computer. In the "recent items" displayed the Items that i used with the test account but after several tests it is clear that the system doesn't write down the recent items when i open my account. The com.apple.recentitems.plist still showes only the items i used with the Test account and the info of the file says that it wasn't touched sinced i copied it from the test to my account.
The Terminal command didn't change anything. The question is why doesn't the system write down wich items and documents i used when i'm in my account?
Greetz
Djordji
Message was edited by: SPUMD -
My palm m105's touch screen doesn't work properly after a sync.
I dug out my old m105, put new batteries in and start it. On first launch it auto runs the alignment tool, and after touching all the points it goes to the main screen and works fine. No problem till here.
Now, I plug it into my old computer which still has the palm software with my apps, and I run the sync operation (from the palm device sync manager, cause I lost my cradle and I'm connected via the serial cable), and it syncs fine BUT, here comes the problem, when it finishes the sync (successfully) the touch screen is all misaligned. I can't go back to the home screen or do anything useful.
My palm m105's touch screen doesn't work properly after a sync.
I dug out my old m105, put new batteries in and start it. On first launch it auto runs the alignment tool, and after touching all the points it goes to the main screen and works fine. No problem till here.
Now, I plug it into my old computer which still has the palm software with my apps, and I run the sync operation (from the palm device sync manager, cause I lost my cradle and I'm connected via the serial cable), and it syncs fine BUT, here comes the problem, when it finishes the sync (successfully) the touch screen is all misaligned. I can't go back to the home screen or do anything useful.
Thanks in advance!
Post relates to: Palm m105
Post relates to: Palm m105Maldoman578,
Let's help solve this mystery together! Is your screen freezing after every reboot? Is there any physical/liquid damage on the device? When did this issue begin? Did you notice this after a recent update or application download?
EfrainM_VZW
Follow us on Twitter @VZWSupport -
I have an iphone 3GS and I have upgraded it to iOS 6. Since then it doesn't work properly.
Every now and then it has been restarting by itself and requiring restore. When I connect it to itunes it restarts again and again without letting me take any action. Is there any solution?Hey, There are afew things you can try.
- Simply turn your phone off and back on again
- Hold down your home button and your lock button and let goes as soon as the screen goes black (Phone will power down) - Then turn on your phone and hey presto!
- Back up your iPhone to your PC, then restore it..
this ones last cause I think you may have tried it already..
- Close all open applications
Hope this helps!
Kieran. -
The sync function on my 3rd gen iPod Touch doesn't work properly. It won't sync all the podcasts I've downloaded, and it won't delete ones I've listened to and deleted on iTunes.
Close your iTunes,
Go to command Prompt -
(Win 7/Vista) - START/ALL PROGRAMS/ACCESSORIES, right mouse click "Command Prompt", choose "Run as Administrator".
(Win XP SP2 & above) - START/ALL PROGRAMS/ACCESSORIES/Command Prompt
In the "Command Prompt" screen, type in
netsh winsock reset
Hit "ENTER" key
Restart your computer.
If you do get a prompt after restart windows to remap LSP, just click NO.
Now launch your iTunes and see if it is working now.
If you are still having these type of problems after trying the winsock reset, refer to this article to identify which software in your system is inserting LSP:
iTunes 10.5 for Windows: May see performance issues and blank iTunes Store
http://support.apple.com/kb/TS4123?viewlocale=en_US
Maybe you are looking for
-
Is the ipod nano 6th generation 8 or 16gb compatible with blue tooth/coordless earphones?
Is the 6th generation ipod nano (any gb) compatible with bluetooth/coordless headphones?
-
Wait event "virtual circuit wait" in wait class "Network" was consuming sig
Hello, We are facing this problem when there are 2 queries try to run at the same time. The first query takes longer to finish so 2nd has to wait for 1st to be finished and then only 2nd starts. It seems the jam is at netowork instead of server. I wa
-
1. I have 170 photos in a slideshow. I have a global time of 2.5 sec except for 53 that I would like to make 1.7 sec. Do I have to set each of the 53 slides individually or can I set them all at once while not distrubing the remaining slides' timin
-
Tool Palette (shortcuts) in FCP X?
In FCP7 I was able to hit tttt (t 4 times) and this would automatically select everything to the right (forward). Does such a tool exist in FCP X?
-
Plug-ins Needed for SMP Target Users
No Strobe Media Playback plug-ins are available to the SMP target audience. The Introducing Strobe Media Playback presentation says: Our target audience for Strobe Media Playback and Flash Media Playback are designers, content owners, enterprises, an