Why  i can not hear?

I just got my iphone5 and after 2 weeks, I find it not what expected. And now out of the blue, I can not hear the others but they can hear me. Why?
Can someone help? I really donot want to go to Apple Store and line up.
Thanks

only bluetooth headsets which support the bluetooth profile called a2dp support other audio then normal phone calls
same deal with all phones and bluetooth devices

Similar Messages

  • Why i can not hear directly from my iphone without using hand free?

    why i can not hear directly from my iphone without using hand free?

    Hello oshoke21,
    The following article provides steps that can help get your iPhone's speaker working.
    iPhone: No sound or distorted sound from speaker
    http://support.apple.com/kb/TS5180
    Cheers,
    Allen

  • Why my new 4s call out and my friends can not hear me?

    why my new 4s call out and my friends can not hear me?

    Sounds like your microphone might be busted.  Test it by doing a voice memo. If this is the case you should take it to your service provider/carrier/nearest apple store to have it looked at.
    Alternatively, try using headphones or a bluetooth headset. These are all steps to make sure it's not the mic that's damaged.

  • I can not hear any voice from the ear piece with my new Iphone 5. I don't know why.

    I just used the new iphone 5 for one week. Now, I found I can not hear anything from the ear piece. The speaker is ok, but it dose not work on the earpiece.
    I use it very carefully, I even use a good case for it.
    I don't know why!!!!!

    Did you remove the plastic protector that came on the front of the device?
    Is there a screen protector or case blocking the speaker on the device?

  • Why do I can not hear the siri's voice on my iphone speaker anymore, why do I can not hear the siri's voice on my iphone speaker anymore

    why do I can not hear the siri's voice on my iphone speaker anymore, why do I can not hear the siri's voice on my iphone speaker anymore

    All apps - all paid and free apps include DRM protection that is tied to the iTunes that was used to download the apps. This means you have apps on your iPhone that were downloaded with your daughter's iTunes account. Apps cannot be transferred or merged with another iTunes account.
    Delete the apps from your iPhone that were downloaded with your daughter's iTunes account to prevent being prompted for the account's password when there are app updates for the apps downloaded with the account. An iTunes account cannot be deleted.

  • TS4079 Sometimes Siri's volume automatically goes so low that I can not hear it. Then the next time I ask something the volume is up again. Why does it do this?

    Some times Siri's volume automatically goes so low that I can not hear it. Then I ask another question and the volume is back to normal. Why is this?

    Hmm, have you tried to raise the volume when Siri is activatied? (Hold home button down to activate S, then turn the volume up) Hope it helps!

  • IChat Can be heard and watched, I can Watch but I can not Hear

    Hi iChat Forum,
    I'm new into the Mac world environment with a recent out of the box MacBook Pro that I just recently received three weeks ago. One of the main concerns that I would like to share with you is Video Conferencing with a PC AIM user, which I think this deserve some sort of investigation or if you have any suggestion that I could do to solve the problem I really, really would appreciate it.
    Let me tell you my story:
    On me side, I'm in UK based with:
    - A New MacBook Pro, No modification to any settings.
    - Firewall, I checked settings and it is off.
    - BT Voyayer2091-B7 Wireless ADSL Router (Works Great), high speed.
    - Setup Account for iChat on AIM network
    Other End, My Wife based in Mexico with:
    - Dell Latitud D810 Intel Prowireless, Windows XP SP2 (1.8GHZ, 2MB Memory), No internal microphone integrated.
    - Ethernet Broadband connection, high speed.
    - Webcam PCL-300K connected trough a USB port with Microphone.
    - Setup account for iChat on AIM network
    We followed the recomended setting described by this two sources:
    http://www.mvldesign.com/videoconferencetutorial.html
    and
    http://www.ralphjohnsuk.dsl.pipex.com/index.html
    Without too much hassle we were able to communicate each other, wow! this is great it works!! we though, with a little bit of delay in the frame display but voice very clear this was enough to keep in touch each other.
    After three weeks of succesfull communication on both ends for long periods (1.5hrs) without any interruptions we were able to communicate, and it was four days ago that all of the sudden we starting having problems with our communication, starting primarly with receiving this message errors of not responding for an invitation from her after I accepted her request, the same situation in the otherway around. However after disconnecting and trying again it was only when she invited and I responded (Accepting) which finally we stablish communication again.
    The Problem:
    Now, even that we are able to stablish communication with Video in both ends, she CAN perfectly hear me and watch me, on the other hand I CAN see her but CAN NOT hear!!. At first we though it was a problem on the microphone, not switched on or some kind of sound setting that she might turned off, but NOT, everything was right.
    Well, I refer back to the documentation described in the links above thinking that this may be an issue with the router on her END not Mine or firewall setting. She reinstalled everything and follow all the required steps to setup the setting of the firewall according to documentation and we tried again with the same results.
    On my end as I mentioned previously I do not have any firewall set on in my Mac, the only bit that I have not check yet is the router configuration, and the reason is because I'm in a renting property that provide us with Broadband connection to internet that individual or different computers/pcs have access to. And because everything worked fine at first, I don't think there are setting there that are needed to be changed, no one has make anychanges to the router and everything works fine.
    Our last resource for us was, thinking that it might be a problem with her microphone in her web cam, so we decided to use SKIPE instead, and surprise!, we could stablished only voice communication in both ends, so this proved that her Microphone setting are OK!, so our work around to our communication and Video problem is to open an iChat convertation for the VIDEO part, On my END and set the MUTE and Open, at the same time a SKIPE session for Audio only. This works pretty good and actually the frame rate of the display on boths ends accelarate a lot.
    If I check connection Doctor on the iChat session I received 100% coomunication with video and 0% Voice, still I don't received Voice from her.
    I know this is not the good solution and I'm still concern of what wen't wrong on that time that interrupted our communication without doing anything in the settings in both machines.
    We decided not to spend more time anymore on this matter due to I'm very tire investigating what migh have been wrong, but as I said this is not the right solution something is wrong in my settings which does not allow me to pass through voice signals from her. I reached to the point to reinstall ichat but because this is NEW machine and don't want to incurr in the same sort of situation I had with Windows, that is why I personally switched to Mac.
    Well have a happy reading and if you come up with some solution or you have come across with something similar and managed to soleved it I really would appreciate it you help or advice.
    Kind regards
    Alberto

    Hi BetoMosqueda,
    Welcome To The Apple Discussion Pages.
    If your wife has unplugged her Mic at any time she will need to redo the tuning.
    It is also possible that her video quality need to be reduced to allow the audio to come through.
    You should start a chat.
    At her end she should see your incoming video is in one of two tabs.
    She should click on the rear tab which will come to the front and show her preview.
    A small icon should appear to the right of the tab.
    She should click on this to bring up a slider.
    Sliding this to the left will reduce her video quality.
    At this point this will allow the processor at her end to produce new frames faster which means her pic to you will smooth out a bit.
    If you open the Connection Doctor from the Video menu you will see the frame rate and Bitrate go up.
    As the slider gets moved further to the left you should get Audio.
    7:08 PM Sunday; May 7, 2006

  • I can only make the call on the third try, I can not hear the ringer

    I can only make the call on the third try, I can not hear the ringer

    Hi stig68,
    If you are having grouping issues with compilation albums in iTunes, you may find the following article helpful:
    Apple Support: Why aren't songs with the same album art grouped together?
    http://support.apple.com/kb/TS1468
    Regards,
    - Brenden

  • Nokia E5 - Can not hear Caller after disconnecting...

    When i disconnect the phone from the VW car kit, i can not hear a caller when they ring me, the phone does have the car symbol on the bottom status line and the only way to fix the problem is to restart the phone everytime i disconnect from my car kit....not ideal !!!
    Any ideas on why it seem sto think it still connected ?
    Regards
    mark.

    Okay! If you have the same problem, you end all runing programs in the taskbar. reset the phone several times. i can hear the caller after that. hope that the problem comes not back.
    There ist the Problem with the battery!
    Sincerley
    Alex Fromm

  • Why i can not use the ink 650 in the 3515 hp eprint,some body out there to help me out please...

    why i can not use the ink 650 in the 3515 hp eprint?somebody out there to help me please??

    Hi @ronjhay ,
    Thank you for taking the time out of your day to ask that question on the HP Forums today!
    I am having a bit of trouble understanding exactly what it is that you are asking, I apologize. Are you trying to use the number 650 ink cartridge in the printer? And it isn't fitting and you are asking why it isn't?
    Please clarify. Look forward to hearing back from you!
    I worked for HP.

  • Any idea why I can only hear a caller when I'm using speaker phone?

    Does anyone know why I can only hear a caller when I am using speaker phone? 

    Hi goodferg,
    The troubleshooting steps below may help you with the sound issue you are having with your iPhone 4:
    iPhone: Can't hear through the receiver or speakers
    Resolution
    Verify that there is nothing plugged in to the headset jack, including headsets, headphones, or adapters.
    Make sure the Ring/Silent switch is not switched to silent.
    While on the Home screen, adjust the volume buttons. If you see the icon below, indicating that headphones are attached, there may be debris or an object lodged in the headset jack:
    Check the headset jack. If there is an object lodged in the headset jack that is not easily removed, have the iPhone serviced to remove object.
    For Original iPhone: If there is light debris, such as lint, in the headset jack, try connecting a pair of headphones to the headset jack and then remove the headphones. Repeat this several times to remove the debris.
    If you have installed a protective film on the display, either ensure that the receiver is not covered or remove the film completely.
    Check the receiver mesh (which is on the top front of the device, above the display). If it appears blocked, use a clean, small, dry, soft-bristled brush to carefully and gently brush away any debris.
    If you have paired with a Bluetooth headset that is nearby, either use the headset or turn Bluetooth off (chooseSettings > General > Bluetooth).
    Restart the iPhone.
    If restarting the iPhone doesn't resolve the issue, try restoring the device.
    If the issue persists, go to the Service Answer Center - iPhone for information on service.
    Hope this helps!
    - Judy

  • Can not hear the sound

    I have final QT H264 1280x720 AAC Stereo 22,050 kHz.
    I can not hear the sound, why?
    Thanks.

    Its very strange, I created this file outside FCP, using video gallery software.
    I placed in FCP and looking at the Wave Audio its a straight line. Means the audio is there with -1000db
    thanks for help, the case is closed.

  • Why I can not find field:Level in Project Hierarchy in BAPI_BUS2054_NEW?

    Dear experts,
        Why I can not find the field of "Level in Project Hierarchy" in structure BAPI_BUS2054_NEW?
    I only define the data to upload wbs:
    PROJECT DEFINITION
    PROJECT DESCRIPTION
    PROJECT PROFILE
    WBS Element
    WBS description
    Can you tell me which fields must to upload?
    Looking forward to your reply.
    Many thanks.
    Merryzhang

    Anyone can help me ?I need the field "Level" in BAPI_BUS2054_NEW,But I can not find it.

  • Why i can not see the columns of "Tax Category" in transaction code FS00

    Dear Experts,
          Why i can not see the columns of "Tax Category" and "Posting without tax allowed" in tab of "Control Data"  transaction code FS00?
           How can i add the columns of "Tax Category" and "Posting without tax allowed"?
    Looking forward to your reply.
    Best Regards,
    Merry

    Hi,
    Go to transaction OBD4, and check whether the field "Tax category" is suppressed in group "Account control" for your GL account group.
    If not, then go to OB26 and check the field status for the same field for create, change activity.
    Regards,
    Gaurav

  • Iphone 5s - siri can not hear me

    I Have troubles with Siri and the keyboard microphone. Siri can not hear me and it is not possible to dictate any text via the keyboard. Both functions are working fine when I use a external headphone with microphone. The voice memo app is working correctly, so I don't think it is a hardware problem. I checked all siri settings and they seem okay. Voice feedback is not on handsfree but on always. Does anybody know how to fix this problem? I have the feeling the iPhone isfor these functions expecting audio input from annexternal source in stead of the build in microphones. Does anybody have an idea to solve this problem?

    Well, that's a new comman issue comes up with IOS 8.3 version. Before 8.3 IOS version Siri were only available in some languages, however, after 8.3 release many languages are supported.
    Even if you enable Siri > General > Settings.. still respond your voice.
    No need to try to troubleshooting device - it will not solve your problem. You have to restore your iPhone and then setup as a new device. That's solution.
    May I ask you to tell me if you siri in English ?

Maybe you are looking for