Why I can't connect to my external drive?

Dear All,
I'm a very new user to lion Os. I'm now not able to connect to my buffalo 500 gb ext drive. it's showing ' the device you inserted is not readable by this mechine'
what should i do? Kindly please guide me.
Best Regards,
Win

Not sure which Buffalo you have but a quick Google finds this page:
http://www.buffalo-technology.com/knowledgebase/users/kb.php?id=10241&category_i d=0&sid2=
where they have different drivers for Lion.
Regards,
Colin R.

Similar Messages

Can losing connection with an external drive lead to its failure?

My iTunes library is currently wireless, through my Airport Extreme, so I can use it both with my Macbook Air and my iMac. Of course the downside is only one computer can access it at a time and I'm limited by the range of the Airport, but it works for me... Since my library is too big for iTunes Match anyways and I live in a small appartment it's perfect.
Anyways, my problem is, this setup is fairly new, and a few times yesterday while I was working on adding new music to my library (ripping my CDs in lossless), I got the error message that connection was lost with my iTunes drive!
My internet didn't seem to flinch though, which is weird. But it doesn't seem to be the "the disk was not ejected properly" external disk error that's been going around, as I HAVE that **** problem with another of my drives... (connected via cable) and it's not the same error message.
This one is just saying the connection was lost... like Airport had the hiccups or something.
Time for me to click on "ignore" and I could go back to what I was doing.
Except twice, this happened WHILE a track was importing into iTunes!
The first time, I got an error message saying it was impossible to read or write to the device... I was scared... closed iTunes, re-opened... and it looked like nothing happened! Phew. Even the freshly imported tracks were there, up the to one that was importing when it lost connection, which of course wasn't imported.
But then it happened again... while it was, again, importing...
This time, restarting iTunes didn't cut it.
When I opened Airport Utility to check, I had yellow question mark, and a message saying the attached drive was failing, or corrupted, something like that (can't remember), to plug it directly in my computer and repair it!
I did that, opened Disk Utility... and the drive won't mount.
I tried the few tricks I know, still won't mount.
So now I'm in the middle of creating a disk image on one of my other external drives (it's been hours and only a third has been done, I'm crossing my fingers it doesn't just freeze, give me an error message or tell me there's not enough space... because I couldn't check how much space was used since it wouldn't mount... and it has been a while since I checked).
I'm also in the middle of checking for data recovery with my old StellarPhoenix app... not even sure what it could do or if it still works...
But all that to wonder : can a simple network disconnection be enough to do that???
If so, how come people rely on NAS, how come so many use Airport in conjunction with external drives?! It just doesn't make sense to me...
Maybe this was just a weird coincidence? Or maybe I'm taking the problem the wrong way, and the lost connection happened because the drive was failing? In that case I just find it weird that I didn't see any sign of that while it was connected directly to my iMac, right until a few days ago!
...Gee, I'm tired of buying external drives!
For the curious, this one is a 2TB Samsung (Iomega), bought in december 2010, so just 2 years old.

Thanks edex67!
Now the question would be, are numerous losses of connection in a day normal for Airport Extreme, or is mine failing?
Can't find a model number and the serial doesn't lead anywhere, but I'm pretty sure it dates back to 2008, the second generation.
A small update: Problem seems to definitely be just in the filesystem since after formatting all seems well, while I can't restore with my disk image, as after hours of scanning it, I now get the error message that Disk Utility can't scan it because of an internal error.
Now let's hope I can save the data, because even though I regularly did backups of that disk, I would still lose those hours of new imports and organization I had just done when it failed...
I'l look for Gparted also... thanks!

PC can't connect to AEB external drive, but Mac can.

Until recently I was able to connect to the external hard drive I have attached to my 1 generation Airport Extreme base station, version 5.6.1, running firmware version 7.6.4. It just stopped showing up one day and it gives me errors when I try to connect saying credentials are wrong, but they're not. I've tried everything I could find, including changing some Windows settings, reverting firmware, resets and a lot more. It used to automatically connect at start up, and showed up as a 'Z' drive, and worked great. The drive is fine as well, that was my first concern. I just connected to it from the File Browser app from the app store, and my other Apple devices, MPB, Apple TV, both see it. Just not my Windows 7 pc. This was my last resort after many hours of troubleshooting. Any help would be greatly appreciated, thanks in advance.

Standard network troubleshooting.
1. If you are using wireless plug in by ethernet.. never trust wireless.
2. If the computer gets an IP from the Extreme.. ping the extreme in a command window.. does it respond? It must respond before worrying about all the rest.. Windows can auto decide it is now in a public location and ram up the firewall. Make sure your network location is home.. and if necessary turn off the firewall.. the TC must respond at least by IP.. name as well would be good.
3. Open the Control Panel admin tools and make sure bonjour is running as a service. If it has failed stop and restart it.
4. Try mounting the hard disk directly by IP in windows explorer.
\\10.0.1.1 (replace with the actual IP address).
5. If it is only wireless that is the problem.. you probably had some sneaky windows security patch install and that ruined everything.. windows patches are often 2 steps forward.. 3 backwards.. you can no longer be attacked because you no longer have internet connection!!

Can't connect to FTP external drive - EA3500

Trying to connect to my external hardrive using FTP app from my phone to test it.
I uncheck the 'filter unwanted traffic box' and even tried switching the port from 21 to 4460.
Can't seem to connect on my iphones brower I get 'server not responding' and any app I use cannot connect.
Using UTF-8 encoding too.
Heres what I type into the browser, "ftp server ip : port"
Any help would be appreciated.

Shouldn't it be?
ftp://192.168.1.1
or
ftp://192.168.1.1:4460
Please remember to Kudo those that help you.
Linksys
Communities Technical Support

HT204382 why movies can't play from my external drive with quickplay

please let me know why i need a code for quickplay

Restart, holding down the OPTION key until the icons start showing up on the screen. When the spinning gear stops, select the internal HD, and click arrow underneath. That should boot the machine with the internal HD. From there you can run Disk Utility on the USB HD. By the way, your English is fine.

Can anyone tell me why I can not connect my Blackberry or my iPhone to my new Macbook pro? I had no problem with my old Macbook.

Can anyone tell me why I can not connect my Blackberry or my iPhone to my new Macbook pro? I had no problem with my old Macbook.

What type of headphones were you using? I have a set of Microssft headsets, with the built-in mic and connected via USB, and have no problems.
Clinton

Why I can not connect ipad2 and iphone5 to wifi by using d-link modle? but my computer and iphone3 can do it.

why I can not connect ipad2 and iphone5 to wifi by using d-link modle? but my computer and iphone3g can do it.

iOS 6 Wifi Problems/Fixes
Fix For iOS 6 WiFi Problems?
http://tabletcrunch.com/2012/09/27/fix-ios-6-wifi-problems/
Did iOS 6 Screw Your Wi-Fi? Here’s How to Fix It
http://gizmodo.com/5944761/does-ios-6-have-a-wi+fi-bug
How To Fix Wi-Fi Connectivity Issue After Upgrading To iOS 6
http://www.iphonehacks.com/2012/09/fix-wi-fi-connectivity-issue-after-upgrading- to-ios-6.html
iOS 6 iPad 3 wi-fi "connection fix" for netgear router
http://www.youtube.com/watch?v=XsWS4ha-dn0
Apple's iOS 6 Wi-Fi problems
http://www.zdnet.com/apples-ios-6-wi-fi-problems-linger-on-7000004799/
~~~~~~~~~~~~~~~~~~~~~~~
Look at iOS Troubleshooting Wi-Fi networks and connections http://support.apple.com/kb/TS1398
iPad: Issues connecting to Wi-Fi networks http://support.apple.com/kb/ts3304
WiFi Connecting/Troubleshooting
http://www.apple.com/support/ipad/wifi/
iOS: Recommended settings for Wi-Fi routers and access points http://support.apple.com/kb/HT4199
Additional things to try.
Try this first. Turn Off your iPad. Then turn Off (disconnect power cord for 30 seconds or longer) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
Change the channel on your wireless router (Auto or Channel 6 is best). Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
Another thing to try - Go into your router security settings and change from WEP to WPA with AES.
How to Quickly Fix iPad 3 Wi-Fi Reception Problems
http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
If none of the above suggestions work, look at this link.
iPad Wi-Fi Problems: Comprehensive List of Fixes
http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
Fix iPad Wifi Connection and Signal Issues http://www.youtube.com/watch?v=uwWtIG5jUxE
Fix Slow WiFi Issue https://discussions.apple.com/thread/2398063?start=60&tstart=0
Unable to Connect After iOS Update - saw this solution on another post.
https://discussions.apple.com/thread/4010130
Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
~~~~~~~~~~~~~~~
If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
 Cheers, Tom

HT1212 I HAVE TRIED TO CONNECT TO ITUNES TO RESET AS I CAN'T REMEMBER MY PASSWORD. I PURCHASED THIS IPAD FROM EB GAMES STORE IT IS RECONDITIONED SO I DON'T KNOW IF THAT WOULD HAVE ANYTHING TO DO WITH WHY I CAN'T CONNECT TO ITUNES

I HAVE TRIED TO CONNECT TO ITUNES TO RESET AS I CAN'T REMEMBER MY PASSWORD. I PURCHASED THIS IPAD FROM EB GAMES STORE IT IS RECONDITIONED SO I DON'T KNOW IF THAT WOULD HAVE ANYTHING TO DO WITH WHY I CAN'T CONNECT TO ITUNES

If it is your password on your appleID account then click on the link to reset your password.
If it is your four digit passcode then See here - http://support.apple.com/kb/HT1212
You will have to go down the route of a Restore. Please read carefully the links therein with regard to using a different different computer from that with which you normally sync.
[You may also have to put your device into Recovery Mode - http://support.apple.com/kb/HT1808 ]

Why I can't connect to app store and can't update the new?

Why I can't connect to app store and can't update the new?

Are you trying to update on the phone or update with the phone connected to the computer? are you connected to wifi?

Can't install Leopard on external drive

After speaking with someone at the Genius Bar last week, we determined that the problem I'm having with my eMac is probably due to the 4-5 year old internal hard drive finally getting ready to give up the ghost. ;-(
I asked if it would make sense to buy an new external drive, load Leopard on that, and boot off that while I save for a new Mac. He suggested that would work. (While the speed might not be ideal over a USB connection, I'm not too concerned with that. As long as the kids can do their homework, and I have a place to store photos it's fine.)
I just got my new external HD, got it partitioned into 3, and am trying to load 10.5.3 on it from my CD so I can make it the boot drive. The problem is that - while all 3 partitions show up on the "list" of places to install, the internal HD is the only one that will let me install on it. The 3 partitions all say that I can't install on them.
Any idea why I can't install on the external, and more importantly, can I work around it somehow before my internal drive dies for good?
Thanks,
Tim

Hi JDB38;
There is no such thing as an Intel G5. It is either one or the other but never both. An Intel tower is a Mac Pro. A G5 is a tower with a PowerPC processor in it. So which do you have?
Allan

Is it OK to use USB 2.0 connection for Glyph external drive and Mac Pro as project drive?

Is it OK to use a USB 2.0 connection for Glyph external drive and Mac Pro as project drive? I was told by Sweetwater tech support to use Firewire, but both the FW400 and FW800 connections crash my audio interface software mixer (Presonus' "Universal Control" software).
Both Firewire connections also create a 10 second hang for each Command-Save that I do.
USB 2.0 for the external drive seems to be working so far, but is there some reason I should be wary of using this as my go-to project drive? In other words, I am imagining that there was probably some definite reason that the tech support guy mentioned not to use it. But maybe not. It's a brand new Glyph. In any event, it's nice to have the 10 second hang eliminated, and I was just looking for some advice, since digging into the Presonus software issue could take some time.

If you have a mac pro, why not stick the external HDD inside via one of your many SATA cables & have it run 9 times faster than your USB?
Or stick a HDD CADDY in your mac pro, so you can slot in a full sized 3TB HDD for recording, and when you are done, pull it out & slip it in an external enclosure if you need to take it places?

Using an external drive with shared files (iPhoto, iTunes), attached to a Time Capsule, can the contents of the external drive be backed-up to the internal Time Capsule drive? Perhaps a RAID1 mirror to a partition?

Using an external drive with shared files (iPhoto, iTunes), attached to a Time Capsule, can the contents of the external drive be backed-up to the internal Time Capsule drive? Perhaps a RAID1 mirror to a partitioned Time Capsule? I understand that the Time Machine (software) cannot backup a networked drive (the external) and that Time Capsule (the router/wireless hard drive) does not have its own backup software... so it won't backup the connected drive. What I would like is an alternate solution for having an automated backup of a networked drive. A 2TB Time Capsule has more than enough space for Time Machine backups of my family of Macbooks, so I had hoped to mirror a 500GB external drive (with shared media files) to a portion of the Time Capsule internal hard drive. I assume this would require a partition of the Time Capsule drive. If not, would the sparse file from the various computers being backed up need to be copied to the external drive as part of the RAID1 setup? This seems like overkill for the Time Machine backup, but it would cover the media files.

The complexity with this idea is the software has to run from a Mac computer on your network.. so you need a Mac turned on, probably most of the day.
It isn't possible to partition the TC although you can create a image area.
The software would have to copy the material, that means all files to be copied, go from USB drive, back to the Mac, then back to the TC, and written to the drive. In other words you have just added Network congestion, although a proper incremental backup type software will not actually use a lot of capacity.
Finally it will be slow.. network drives are slower than internal drives. Well USB connected drive is much slower than the same drive connected directly to the computer.. and if the drive is connected directly to a computer it can be shared with the network.
http://www.anandtech.com/show/4577/airport-extreme-5th-gen-and-time-capsule-4th- gen-review-faster-wifi-/4
Read carefully the speed of the USB drive plugged into the TC.

I can't access my portable external drive anymore.

I can no longer access my external drive. I can see it in the system profiler but not the disk utilities. What should I do?

At the Apple Icon at top left>About this Mac.
Then click on More Info>Hardware>USB, does it show up there?
No idea why Mobile me is popping up.
"Try Disk Utility
1. Insert the Mac OS X Install disc that came with your computer, then restart the computer while holding the C key.
2. When your computer finishes starting up from the disc, choose Disk Utility from the Installer menu. (In Mac OS X 10.4 or later, you must select your language first.)
Important: Do not click Continue in the first screen of the Installer. If you do, you must restart from the disc again to access Disk Utility.
3. Click the First Aid tab.
4. Select your Mac OS X volume.
5. Click Repair. Disk Utility checks and repairs the disk."
http://docs.info.apple.com/article.html?artnum=106214
Does the external show up there?

I can read but I can't write to an external drive - changing permissions

I can read but I can't write to an external drive.
How do I change permissions? None of the helps here on the discussions have helped.
Why would a computer company let me read files but not write? Hahaha. This is insane.
I have to write computer files for work. It's a project due this morning.
Man, I'm going to have to go back to PC.
Just need the compter to write files.

If it's formatted as NTFS, reformat it as MS-DOS, exFAT, or Mac OS Extended (Journaled) as desired.
If it's formatted as FAT32 or exFAT, use the Disk Utility's Repair Disk command on it.
If it's formatted as Mac OS Extended, click Authenticate and provide your administrator password, or change the permissions on that specific folder in its Get Info window.
(72460)

Can I Connect a USB Hard Drive Directly to the IX4-300D?

I need to copy large amounts of data from a USB hard drive to the IX4-300D. So can I connect the USB hard drive directly to the USB port on the IX4-300D?
If "yes", how does the USB hard drive show up in Windows so I can select the file to copy?

Hi exceptionalht,
The USB ports are intended for external storage devices such as flash drives and USB hard drives. Once you connect the hard drive to the USB port, the device's content will show up as a new share in the Shares page. You should be able to map that share in Windows or have Storage Manager map it automatically.
To safely remove the external hard drive, go to the External Storage page and click the eject icon for that device.
Have questions and need answers?
Search the database for answers to FAQ's, software/driver downloads, tutorials, news, features and more!
LenovoEMC Support & Downloads
LenovoEMC North America Support Contact Page

Why I can't connect to my external drive?

Similar Messages

Maybe you are looking for