Why I can't execute Plan Settlement after changing CO document in KANK?

I changed assignment of Plan Settlement Business Transaction from Planning Transaction Group Number ranges to Settlement Group Number Ranges in KANK.
I did it for having the document number ranges consistency : all settlement (Actual and Plan) within one number range group, while all planning transaction within one number range group.
However, after I did it, I can not execute Plan Settlement in KO9E.
It hasn't got any problem before (when I hasn't changed it).
The system is giving error message below:
No settlement for this sender
Message no. KD273
Diagnosis
The system has two business transactions for plan settlement:
1. Settle plan costs
2. Settle plan costs for sales
The system could not determine any of these business transactions.
I have tried changing back the number range assignment, but no result. I still can't do plan settlement.
Please help me asap....Thanking you

Hi,
OBMSG (nothing but table T100S) and add the entries in OBA5 (view V_T100C).
Please go to OBMSG
ignore the cross client warning message.
Find out the application area KD
Select that and click on messages
If 273 message number is not there, then enter the same and Allowed is you please put WE and Standard W, then Tick switch off message.
Then please go OBA5
Enter work area KD
Enter message No.273
Online select - (switch off the message)
Standard - (switch off the message)
Regards,
Ravi

Similar Messages

  • Why  I can't find the overall status in billing document!?

    Hi,
    Why I can't find the overall status in billing document? but I can find this status in table VBUK, some documents set 'B' in this field, some set 'C', all of them are Completed and the corresponding account documents are cleared. for this status is 'B',I can't archive these documents.
    Thanks.

    Dear Lance
    Check the field Document object    i.e Document Status object .
    A     Order
    B     Purchase order
    F     Billing document
    K     Sales activities
    L     Delivery
    T     Shipment
    V     Shipping
    X     Others
    Check if all your entries are F, if not find out which document and try to find out why it is not C.
    Do revert with your feedback
    If it is still a problem , check some SAP notes
    For e.g. Note 142368 - Segment VBUK missing in billing document
    Header status segment VBUK is missing in the billing document.You can check this with the general table display (SE16).
    It is not yet known why this segment is missing.
    correct many documents, you can use report ZZVBUK01.
    Regards
    Jitesh
    Regards
    Jitesh

  • EXIT after changing the document status to Parked and complete

    Hi,
    I have an urgent requirement to findout a exit which will trigger after changing the document status to PARKED and COMPLETE. I need this for invoice and FI document.
    I will really appreciate your help.
    Kuntal

    Yes the Workflow Background process completed successfully with no errors. I see the error when I query up the Sales Order go to menu --> Workflow Status -->
    Activity History.
    The Activity History shows error in the Wait Function and the error message is 3001: Invalid command argument.?
    This error message does not explain much. I followed all the steps in document# 397364.1
    Don't know why it should end in error and how it can be fixed?
    Any more ideas?
    Thanks

  • Why won't my computer let me make changes to documents??

    Why won't my computer let me make changes to documents saved in pages and save them again? It keeps saying access denied when its my computer and I have Lion OS X

    Right click the document and select 'get info'.  Check the permissions for the file.  If several of these files have the wrong permissions then you may need to repair user permissions.  See this for instructions:
    http://osxdaily.com/2011/11/15/repair-user-permissions-in-mac-os-x-lion/

  • How can I execute a command after kernel-upgrade/mkinitcpio

    Because of the archlinux specific kernelnaming-policy there's a problem when using grub2. The created menu looks nasty because grub-mkconfig can't find the proper kernel-version. (Bugreport: https://bugs.archlinux.org/task/25453)
    Even if this is fixed we need to recreate the grubconfig always when a new kernel-version is installed.
    What I want now is executing grub-mkconfig after each kernel-installation/mkinitcpio, without repackaging the kernel. Is such a hook possible?
    Last edited by fsckd (2012-02-21 17:36:20)

    Rorschach wrote:
    Because of the archlinux specific kernelnaming-policy there's a problem when using grub2. The created menu looks nasty because grub-mkconfig can't find the proper kernel-version. (Bugreport: https://bugs.archlinux.org/task/25453)
    Even if this is fixed we need to recreate the grubconfig always when a new kernel-version is installed.
    What I want now is executing grub-mkconfig after each kernel-installation/mkinitcpio, without repackaging the kernel. Is such a hook possible?
    This is not necessary unless Versioned Kernel Installs are supported by pacman. I have added a new patch to https://www.dropbox.com/sh/jth3mchm3hob … src.tar.gz that solves the issue. No need for pacman or mkinitcpio hooks (for now).

  • HT201210 why i can't syn some application after restoring

    Why i can't sync some application from my mcbook back to my iphone after i upgraded to ios 5.1.1?

    Have you checked that those Apps are Compatible with iOS 5.1.1

  • TS3276 email was hacked, can open email on yahoo (after changing passwords) but cannot open mail on my computer, cannot even access mail because it will not accept my user name or password and I am unable to reset my account

    email was hijacked and spam/virus link sent out to all of my contacts on wed at 4:21AM..... with the Subject as Rep: My Name or My email address and a link to a web page discussing making money working at home.  Could not get into any of my mail, on the web or on Mail on my mac.  After a phone call to automated support through Yahoo through ATT, I was given a temporary password and was able to reset my Yahoo password and get email on the internet.  I still cannot open my Mail Account on either my iMac or MacBook Pro.  I cannot get into Mail, period.  My sign in keeps popping up and it keeps telling me that my user name or password is incorrect.  I tried my old password, the temporary password and the new password.  Nothing is working,  I cannot receive or send anything in Mail.  Mail is Frozen.  If I want my email, I must go to the web and sign into Yahoo Mail.
    Help!

    When you were entering your new password in mac mail for your Yahoo account, you didn't perchance change the user name from [email protected] to just name without the @att.net? I only ask because I've done that, and att.yahoo mail requires a fully qualified [email protected] for access.
    In mail, you might click on window on the menu bar, then connection doctor. On the account with the red dot next to it, it will tell you why it can't connect, and if you click on it, you'll be taken to where you can fix it. 

  • Why does iPhone/Ipad still sync email after changing Exchange\Windows Server AD password !?

    Has anyone noticed this issue before? A user changes their office network password but it takes anywhere from 2 days to more than a week before the iPhone notices and prompts the user to enter their new password. But not only that, users can still access their e-mail account and send and receive e-mail with their old password.
    We are using MS Exchange 2010. Other phones like samsung galaxy and nokia e72 immidiatly prompt for a new password, after changing the password on the windows machines.
    Please help.
    Marc

    I would recommend as soon as you restore the iPad go in and delete the exchange account from your device.  It may have a cached entry causing the wipe command to continue to execute.  You may ultimately need to restore it without the backup and set the account up again.

  • How can we remove the space after changing look and feel to generic

    Hi
    I want to remove the space which left blank after changing look and feel to generic in formsweb.cfg file.
    Can anybody help me to remove this blank space.

    Hi,
    can you be more specific on teh space you mean?
    Frank

  • Can't start WLS7 console after changing configuration

    Hi,
    Do you have similar situation using WebLogic v7 ?
    We can’t start our weblogic server after changing JMS configuration
    a bit. Our consultant and I discussed about the solution - one of
    them was to re-install weblogic domain. However, this method is not
    good for production since all applications will have to be re-installed
    again although this WLS is for internal testing.
    Using your production mind, what is the better approach while you can't
    even start weblogic console after an incomplete configuration.
    Consultant's description:
    "Our web application needs to configure WebLogic 7.0 JMS service via
    wls console. After I did configure a new Connection Factory and a
    Destination Keys (actually I should configure a new JMS server and
    queue here), the WLS couldn’t reboot so that there is no way to logon
    console to modify JMS configuration."
    Thanks,
    Alex Lin

    If WLS through the console is creating an unbootable config.xml this is a
    bug.
    When you start WLS it makes a copy of its bootable configuration by renaming
    config.xml to config.xml.booted. If this corruption occurs as you not with
    the console, then you have to back up to config.xml.booted and start over.
    You should open a case with support describing:
    a) the exact version of wls
    b) copy of "bad xml"
    c) the exact steps you took to cause the problem
    To work around the problem I would try following the exact steps listed
    here:
    http://edocs.bea.com/wls/docs70/ConsoleHelp/jms.html
    Cheers
    mbg
    "Alex Lin" <[email protected]> wrote in message
    news:[email protected]..
    Hi,
    Do you have similar situation using WebLogic v7 ?
    We can't start our weblogic server after changing JMS configuration
    a bit. Our consultant and I discussed about the solution - one of
    them was to re-install weblogic domain. However, this method is not
    good for production since all applications will have to be re-installed
    again although this WLS is for internal testing.
    Using your production mind, what is the better approach while you can't
    even start weblogic console after an incomplete configuration.
    Consultant's description:
    "Our web application needs to configure WebLogic 7.0 JMS service via
    wls console. After I did configure a new Connection Factory and a
    Destination Keys (actually I should configure a new JMS server and
    queue here), the WLS couldn't reboot so that there is no way to logon
    console to modify JMS configuration."
    Thanks,
    Alex Lin

  • Can't find some files after changing drive name

    I keep all my music files on an external drive, and my iTunes folder (and iTunes Music folder) on the internal drive. After changing the name of the external drive, a good number of files (not all, and probably not even most, but a lot) couldn't be found by iTunes.
    I'm suspecting that this problem results from having my files stored externally and separate from the internal default iTunes Music folder, but I'm hoping someone can give me some more details about this and hopefully help find a solution. Thanks.

    In the root of the filesystem there normally is a folder "lost+found", in which files with strange names are found. These are the files cvfsck has collected in the recovering of the filesystemnames. It is sometimes not possible to recover the original file name and location. So this is the only way for cvfsck to give them back.
    If you think the content of these files is allright, you can rename and relocate them.
    Regards
    Donald

  • Computer is activated but can't play my tunes after change...

    Hi all!
    Maybe someone can help me out:
    I recently changed the computer, properly migrated the user-accounts, but now I can't use my purchased music.
    Itunes says this machine is not allowed to play the music, and, although it is activated (and the old one is de-activated), offers the option to activate the track/computer...
    thanks for any help: david

    Thanks for asking (and keeping me on track)...
    iTunes wasn't playing the protected tunes, but kept asking for authentification/activation. I looked again and realized it asked for an older ID, which I thought I had merged to the new one.
    It seems that I managed to have 2 accounts, with some tunes on each of them. Got to find out if I can merge them into one...
    thanks again, and if you can point me to a direction of howto merge accounts, I'd be grateful...
    david

  • Why i can't execute jar files

    Greetings
    I read that jar files are executable unpon clicking them, but with me it do nothing.
    right now i'm using the command prompt to decompress jar files
    jar -xf jarfile.jar
    i have windows xp professional with j2sdk1.4.1

    You can execute JAR files by double-clicking them if the JAR files have an appropriate manifest and your file associations are set correctly (i.e. make sure you open JAR files with JAVAW.EXE). You can learn more about the manifest here:
    http://java.sun.com/docs/books/tutorial/jar/basics/manifest.html

  • Why i can't charge my iphone after upgraded to ios7.0.2?Battery losing quickly even it seems to be charging

    My phone's battery seems not to rise even I am charging it.
    And battery loses quickly after upgrading to ios7.0.2
    how can this problem be solved?

    Hey yly_gatsby,
    Thanks for the question. I understand you are experiencing issues charging your iPhone. The following article may help to resolve your issue:
    iPhone and iPod touch: Charging the battery
    http://support.apple.com/kb/HT1476
    Battery does not charge
    1. Verify that the outlet being used is working.
    2. Try another USB power adapter if available.
    3. If no other USB power adapter is available, try connecting to a high-power USB 2.0 port (not a keyboard). The computer must be turned on and not in sleep or standby mode.
    4. Try another USB cable if available.
    Thanks,
    Matt M.

  • Why i can't activate my iphone after restoring into version 6?

    (Your iphone could not be activated because the activation server is temporarily unavailable.Try connecting your iphone to itunes to activate it, or try again in a couple of minutes).
    I TRIED ALL BUT DIDN'T WORK??? ANYONE FROM TECHNICAL SUPPORT CAN SOLVED THIS PROBLEM? THANK YOU...
    Message was edited by: yman81
    Message was edited by: yman81

    This is because your phone was previously jailbroken.
    You will never get the phone to activate.

Maybe you are looking for