Why I can´t open files in CC InDesign by double-clicking them ?

Everytime I am trying to open a file double-clicking it, it says: Choose a software to open it, where I can only pick CS3 from the list. Yes, I did try to select a software from the folder of softwares, and when I pick InDesign CC, simply goes back to the window where the only option still is CS3.
I am opening files straight from the CC platform, but obviously this is not how is suposse to work, is it ?
TNX 4 ur comments!

Sounds like you might have uninstalled an earlier version of ID after installing the latest and damaged or removed the file that handles the association. You didn't say if this is Mac or PC, but it's fairly common to happen on PC and the recommended fix is to reinstall the versions you need, in chronological order, so the icon handler is restored and will show you the correct icon for each version (that isn't available for Mac users) and will set the file association to the last version installed.

Similar Messages

Can't open files when a particular user has saved them

We have one user whose Pages files nobody else can open, edit or copy when he saves them to our server. Somehow the files are not inheriting the correct permissions.
Any ideas?

fruhulda wrote:
Are they password protected?
Otherwise you need to change the permissions for the users or folder. Do you have an Company administrator setting up these things?
Not password protected. I am the administrator. I use a sledge hammer to fix the problem at the moment, which is to propagate the correct permissions from the folder above on the server each time it happens.
The user/permissions setup on the server is correct as far as I can tell. He has a Standard user account and belongs to all Groups.
The only difference I can tell is that he's on an Intel-based computer (whereas the rest of us on PowerPCs), although that could be a red herring.

I cannot open a new browser window by double clicking Firefox icon or selecting NEW WINDOW from the file menu.

I can open only 1 browser window and I can't open another or multiple windows by double clicking Firefox icon or selecting NEW WINDOW from the file menu.
Looking forward to your earliest reply.
Thanks and regards,
Sheraz

Do you have that problem when running in the Firefox SafeMode? <br />
[http://support.mozilla.com/en-US/kb/Safe+Mode] <br />
''Don't select anything right now, just use "Continue in SafeMode."''
If not, see this: <br />
[http://support.mozilla.com/en-US/kb/troubleshooting+extensions+and+themes]

Why i can't open my raw file in adobe photoshop cs6... and i use camera Canon 650D

why i can't open my raw file?

You probably need to update your Camera Raw plug-in for CS6 to something new enough to understand the 650D raw files.
The usual way you’d do this would be Help / Updates in PS.

I don't know why I can't open Photoshop in my computer after downloading the file?

I don't know why I can't open Photoshop in my computer after downloading the file?

Did Firefox create a new profile?
*http://kb.mozillazine.org/Recovering_a_missing_profile
*https://support.mozilla.org/kb/Recovering+important+data+from+an+old+profile
*http://kb.mozillazine.org/Transferring_data_to_a_new_profile_-_Firefox

Why I can't open pdf files when surfing with safari?

I can't open files pdf when surfing using Safari. An error message says I need to launch Adobe Acrobat, but I can't find where. What can I do?

Adobe Reader installed? If so remove Reader.
Macintosh HD > Library > Internet Plug-ins
Look for these two files.
AdobePDFViewerNPAPI.plugin
AdobePDFViewer.plugin
Right click those and select “Move To Trash”.

Vi error on nfs mount; E212: Can't open file for writing

Hi all,
I've setup a umask of 0 for testing on both NFS client (Centos 5.2) and NFS server (OSX 10.5.5 server).
I can create files as one user and edit/save out as another user w/o issue when directly logged into the server via ARD.
However, when I attempt the same from an NFS mount on a client machine, even as root I get the following error using vi;
"file" E212: Can't open file for writing
Looking at the system.log file on the server, I see;
kernel[0]: add_fsevent: no name hard-link! dropping the event. (event 2 vp == 0xa5db510 (-UNKNOWN-FILE)).
This baffles me. My umask is 0 meaning files I create and attempt to edit as other users are 777, but I cannot save out edits unless I do a wq! in vi. At that point, the owner of the file changes to whomever did the vi.
This isn't just a vi issue as it happens using any editor, but I like to use vi.
Any help is greatly appreciated. Hey, beer is on me!

Hi all,
Thanks for the replies
I've narrowed it down to a Centos client issue.
Everything works fine using other Linux based OS's as clients.
Since we have such a huge investment in Centos, I must figure out a workaround. Apple support wasn't much help as usual however they were very nice.
There usual response is "its unsupported".
If Apple really wants to play in the enterprise of business space, they really need to change there philosophy. I mean telling me that I shouldn't mount home directories via NFS is completely rediculus.
What am I supposed to use then, Samba of AFP? No, I don't think so. No offense to Microsoft but why would I use a Windows based file sharing protocol to mount network shares in a Nix env???

Can't open file "~/Library/Application Support/iWeb/Domain.sites"

I was working on iWeb today, doing the usual adding pictures, and gave a few pages some color, and a few pictures here and there.
I restart my computer, because as usual, I almost have no memory left. When the computer is running again, I opened iWeb, and I get this odd message:
Can't open file "~/Library/Application Support/iWeb/Domain.sites"
Why is this here? I didn't do anything weird to trigger such message. The site was working perfectly fine! I tried taking the domain file to the desktop, then opening it once iWeb launches from there, and same message appears. I put it back to its place, and tried putting the iWeb plist on the desktop, and same deal!
Everything is back in its place, I haven't changed or triggered anything to deserve this. I ran Onyx, full optimization update. I restarted computer, and conducted a full disk permission repairs. Only 1 error found out of another app.
My computer is healthy, my programs are running fine. What is going on? Does anyone know how I can fix this?

Hi
Whaow 3.1GB. I'm sure iWeb has problems with that. I have the same problem with my iWeb. I have about 100 BLOG pages with a lot of pictures. Although iWeb scales the pictures when publishing (good!) it does not scale them when they are stored in the domains file/dir (bad!) So if you have an 8MP camera, this adds up after a while.
You can open the comains file and try to figure out what causes the trouble. (Right click/CTRL click, open content) sort on size to see if you have some extremely large stuff in there (Movies???) Take them out and try to make them smaller.
Good luck!!
Walter

Can't open file "~/Library/Application Support/iWeb/Domain.sites2."

Hello,
I have been using iWeb for over a year and I have a lot of my work on it. But for some reason, when I went to open iWeb, I get the error message:
+Can’t open file “~/Library/Application Support/iWeb/Domain.sites2.”+
Does anyone know how I can fix this and make sure my content doesn't get deleted?
Thank You!

Deleting the preference file does not affect the domain.sites2 file. If it's not in the default folder or has a name other than domain.sites2 then that's why iWeb couldn't find and open it. Find it and double-click on it to open it with iWeb 2. You do have a backup copy the domain file, right? If not download and use frequently the Automator application that Varkgirl created. You can get it at Varkgirl's iWeb Tips and Tricks site.

Adobe Reader can't open file

Hello, why do I get the message "Adobe can't open file: IMG.jpg." when trying to open an enclosed file?

It sounds like you are trying to open a .jpg. Reader only opens PDF files.
If that isn't the case, more information would be helpful.

I do not know why i can't open facetime,messages,reminders and appstore on my macbook pro, please help me out

i do not know why i can't open facetime,messages,reminders and appstore on my macbook pro, please help me out

I used cleanmymac for clean up files, always worked fine before maverick, now i used it yesterday and i can not open any kind of programs except google chrome , my last time machine back up was yesterday but according to him he can restore just complete back up and the last one is in october 2013, i am desperate .
i already tried to fix permits and press weird combos of buttons on restarting. not working.
please help

Why i can not open Video Capture Device Settings in Adobe Flash Media Live Encoder?

Hi! I've got a problem with Adobe Flash Media Live Encoder 3.2. Why i can not open Video Capture Device Settings? I'm clicking this button, but it doesn't appear, there is just a blinking of the camera's window. Please help me, i'm looking like a shining red pig! Need to change the light or contrast.

"The audio preview in FMLE indicates there IS audio being input"
How do you know this?
are you "Saving to file"? how is the audio in the saved file?
Adninjastrator

Why I can't open "only read" apresentations on keynote?

Why I can't open "only read" apresentations on keynote?

You should normally be able to open read only files, but you wont be able to edit them.
However to change the permission:
right click file; select Get Info
click padlock button bottom right and enter password
click on 'read only' drop down menu and select; 'read and write'

IPhone SDK - files in wrong spot (was can't open file)

Ok, so I figured out why I can't open my audio file, but it doesn't make any sense to me at all.
You see, if I place my file at the root of my file system, it reads it fine. This is odd, I would have guessed that the simulator would read files based on the bundle. This can't be right, how can I test? Here's my code:
CFStringRef fileString = (CFStringRef) [NSString stringWithFormat: @"test.caf"];
CFURLRef fileURL = CFURLCreateWithFileSystemPath (
kCFAllocatorDefault,
fileString,
kCFURLPOSIXPathStyle,
false
AudioFileID audioFileID;
OSStatus result = AudioFileOpenURL((CFURLRef) fileURL, kAudioFileReadPermission, 0, &audioFileID);
if (result != noErr) {
// lets try writing the file, see where it goes
char buf[8] = "1234567";
CFDataRef data = CFDataCreate (NULL, (const UInt8*)buf, 8);
long writeErr = noErr;
CFURLWriteDataAndPropertiesToResource(fileURL, data, nil, &writeErr);
NSLog(@"bad file open");
return ;
When I run this, the AudioFileOpen fails with a -43. When I catch this and then try to write to the file, I find that the file is created at my filesystems root, I get /test.caf with the contents "1234567" in it!
And, of course, if I delete that file and put my audio file there, then the AudioFileOpenURL works.
This is not useful.
Can anyone see what I'm doing wrong?
Thanks

Don't assume the current directory is anything sensible--construct an absolute path with -\[NSBundle pathForResource:ofType:\]. (After all, should the current directory be the sandbox's root, the application bundle, the Documents directory, or the tmp directory? I can come up with arguments for all four, but the app bundle's argument is probably the weakest.)

Fatal error : can not open file 'msvcrt.lib'

Hello dudes !
I am using windows and jdk1.6. I want to develop one application using JNI. As steps for JNI, i have created Helloworld java class and compiled it, then created header file using jnh. After that i have created HelloWorld.c file.
To build dll file, i am executing the below command
"cl -Ic:\java\include -Ic:\java\include\win32 -MD -LD HelloWorld.c -FeHelloWorld.dll".
Command giving the output as follows:
HelloWorld.c
Microsoft (R) Incremental Linker Version 8.00.50727.42
Copyright (C) Microsoft Corporation. All rights reserved.
/dll
/implib:HelloWorld.lib
/out:HelloWorld.dll
HelloWorld.obj
LINK : fatal error LNK1104: cannot open file 'MSVCRT.lib'
Can anybody say why it is giving this problem.
Also i tried giving the msvcrt.lib path as the value for -MD option,
cl -Ic:\java\include -Ic:\java\include\win32 -MD"c:\Microsoft Visual Studio 8\VC\lib" -LD HelloWorld.c -FeHelloWorld.dll
Then it is giving "can not open file LIBCMT.lib" .
Note : ...\VC\lib and ....\VC\include are added in the path.
Can anybody tell the solution for this ?
Thanks in advance!!

Hi,
I was with the same problem. You have set the your VCC environment.
Path, Include and Lib.
In your directory VCC (2003 toolkit), you have a .bat file (vcvars32.bat)
Run the bat, or copy and past this command in your command prompt.
In my compilation, I run the code, wihtout -MD and -LF. In your, just:
cl -Ic:\java\include -Ic:\java\include\win32 HelloWorld.c -FeHelloWorld.dll
thanks,
Fabio Pinheiro
Brasil.

Why I can´t open files in CC InDesign by double-clicking them ?

Similar Messages

Maybe you are looking for