Why I can't play video with AC3 audio track on Z10?

the AC3 is listed in the supported audio formats on BB10 feature, but every video (ac3) I tried failed
anyone have any idea about this?

Do you allow 3rd-party content at http://www.macromedia.com/support/documentation/en/flashplayer/help/settings_manager03.htm l ?

Similar Messages

  • Why video with two audio tracks imports like one track (main)?

    Ok, lets face one simple thing that is incredibly stupid in Premiere CC:
    - I make video with two audio tracks (screencast with system sounds and microphone, separated)
    - Import it to Premiere CC and see only one audio track, system sounds!
    - What should I do to see both of them?
    - Why Sony Vegas don't make me to go to support forums and make them both visible without extra actoins?

    Great first post!
    Ok, lets face one simple thing that is incredibly stupid in Premiere CC:
    Channel Map the Audio to do what you want it to do with t e source clip.
    Why Sony Vegas don't make me to go to support forums and make them both visible without extra actoins?
    You could have read the Premiere Manual or watched the Adobe TV Tutorials or gone to edit school  instead ...

  • Video with Multiple Audio Tracks-- IOS 4.2 Removes Way to Select Them

    After upgrading to IOS 4.2 on my iPhone 4, I've found it no longer lets me select from among multiple audio tracks. The option and button is completely gone.
    I encode my videos with AC3 audio as the first track (for my home media devices), and stereo audio as the second track (for the iPhone). Now the iPhone will just play the video, with no audio, and no way to select another track. This is extremely frustrating as I've encoded all my DVDs this way, and never had any issue with playback like this on any IOS device going back to the first gen iPod Touch.
    Anyone else have this issue, and know of a work around? Thanks!

    I too have the exact same problem for the exact same reason. Did you ever figure out a workaround (other than reencoding all your videos)?

  • Why does my iTunes not play Videos with AC3 passthrough?

    Hello everyone,
    I have a problem with my iTunes on my Mac (recent iTunes, recent OS X). As the title says, I can't play videos, that contain AC3 Audio. If I try to play a video with AC3 in iTunes, it just doesn't start playing. When I jump to a later chapter, it just shows one still frame but it doesn't start playing. QuickTime plays every video without any problem. I tried it with (self-encoded) Full HD (1080p) and also SD videos.
    QuickTime doesn't have any problem and also my 3rd Gen Apple TV streams the Video without any problem from iTunes... moveis I bought from the iTunes store also work without any problem in iTunes, as they all contain an AAC-Audio track. I didn't recognize that issue before I updated to Mountain Lion... or maybe to the latest version of iTunes.
    Does anybody know what possibly is the reason for that and how to solve it? Thank you!

    OK, I found another thread here, where my problem has already been solved. It works fine now. For everyone who got stuck on the same problem and finds my thread first, here's the solution, that helped me:
    - download A52Codec.component
    - move it to /Library/Audio/Plug-Ins/Components/ and replace the existing file
    Best regards,
    Michael

  • Can't play video with Extreme from NAS. Help.

    Hi!
    I have bought AirPort Extreme 2013 and now I can't play video on my Home Theater. (Can't play video. This video file is not supported).
    Before I had ASUS RT-N66U router and video were played fine. The most of them. I mean *.avi, *.mkv and other codecs.
    Video files are on LaCie 2big NAS. It connected to AirPort Extreme with ethernet cabe (1Gb). Home theater connected to AE router with WiFi. I can browse all the files on NAS, view photos but cant play any video now.
    It plays video from USB stick, but cant play the same video from NAS with WiFi.
    There no any setting on AirPort utility. What should I do? Whats wrong?

    The problem is solved.

  • MPEG videos with AC3 audio in iMovie

    Hi there,
    Aplle seems to totally ignore AC3 audio streams (at least in MPEG videos)! Why?
    My JVC cam corder records *.MOD files on its hard disc. Those files
    are in fact MPEG2 files, but with AC3 audio.
    Renaming the files makes them playable using the Quicktime Player, but
    without the sound
    MPlayer is able to play them correctly, but that does not help me,
    because I want to use the videos in iMovie and iDVD.
    I tried installing the 'AC3 Codec.component' (what is supposed to fix
    the problem for AVI files)
    and now I installed Perian, which does not do the trick either.
    I can ofcourse use ffmpeg to convert the files, but that means a
    quality loss and a lot of work I wanted to save by buying a Harddisk
    camcorder, so I could skip the time consuming conversion from DV tapes
    to mpeg.
    I there anybody out there with a solution?

    QuickTime doesn't like to play the multiplexed sound on mpg videos. The QT Plugin ONLY supports video playback and NOT the audio track of such content (as you have found out).
    I suggest you look at VisualHub software ( http://www.techspansion.com/ ) to convert your files to DV. It works with my problem mpg-4 files with multiplex audio. It runs in a free trial mode so you can verify it does what you want before buying it.
    F Shippey

  • Is there any way i can record a video with 2 audio sources?

    I want to be able to record a video with 2 audio sources (1 being a mic and the other being a guitar, both plugged in by usb's) while recording myself playing at the same time. I usually use an aucoustic but the sound is obviously much better when i plug straight in, is there any way i can do this without recording everything seperate? Im using a macbook pro.

    Are you looking to do post recording adjustments to the separate tracks? That really determines now you do this.
    If you not looking for multitrack recording (you just want to combine the two signal into one and record that) then probably the easiest thing to do would be to get an external mixer that would accept multiple inputs and output as  USB . Then you could set the levels with the mixer and just worry about recording the one signal.
    You could try using the MIDI Audio Setup app to create an aggregate device (one that will accept multiple inputs).
    There is also the 3rd party app Soundflower. It's an app that takes audio signals and allows you to route them between apps and to combine audio signals. It is dated but still works in 10.8
    regards

  • Why will Divx not play video with sound on Firefox but will play with sound on Chrome?

    Divx will play web based movies with both sound and audio on Chrome.
    Divx will only play video on Firefox.
    I have removed and reinstalled Divx on my computer.
    I have a desktop computer running Vista.
    I just became aware of this problem yesterday. In the past I have had no problem running these videos on Firefox with both sound and video.

    I was having this problem with videos at home yesterday as well.
    I also saw this conversation [http://veehd.com/forum/viewtopic?f=523714] and it may be a codec issue? No one confirmed this yet.
    *But to make sure it is not Firefox, temporarily disable it and try another player. [[Fix common audio and video issues]]
    *[[Troubleshoot extensions, themes and hardware acceleration issues to solve common Firefox problems]]
    Please post back with your results, it could help other users!

  • VideoDisplay plays video with no audio

    I am experiencing times when my VideoDisplay object plays the
    video fine, but with no audio. At that point, all audio in the flex
    application cannot be heard. Has anyone else experienced this
    issue?

    Try the following steps, check whether things are working after each step where appropriate, before trying the next.
        1.    Restart the Apple TV (Settings > General > Restart).
        2.    Restart the Apple TV by removing ALL the cables for 30 seconds.
        3.    Restart your router. (Also try removing it’s power cord for at least 30 seconds)
        4.    Reset the Apple TV (Settings > General > Reset > Reset all settings)
        5.    Restore the Apple TV (Settings > General > Reset > Restore)

  • I have two videos and I would like to use parts of both videos with one audio track what is the best way to edit this?, I have two videos and I would like to use parts of both videos with one audio track what is the best way to edit this?

    In Final Cut Express I have two videos I'd like to merge parts of each video into a final film.  What is the best way to do this in FCE?

    Hi
    I use a slightly different way than Alchroma.
    Same
    • One video on track 1 and the other on Video.track 2
    • Resize to 25% and move one to the left and the other to the right
    Diff
    • I don't use the blade tool
    • I use the Pen tool and change the transparency - then I get fast or slow transitions in same stroke and easy to fine-tune later if needed. (But this can be done with the Roll-tool if Blade is used - so it might be as easy)
    Final
    • Resize to 100% and Center
    Video is done
    Audio - very close to this by changing the level so that best audio will dominate
    • Pen tool here too
    But that's me - the Alchroma way is as good as this or may be better for some
    Yours Bengt W

  • Export Video with Multiple Audio Tracks

    I need to be able to export video with audio on multiple tracks. I have moved to CS6 from FCP 7 where this was rather easy to do. I can make a preset in AME with more than enough mono tracks but after the encode the video is always smashed to one mono track. I am not doing a 5.1 mix, there are different mic's on each track that need to remain independant of one another and mixing them down within Premiere is not feasable. Are there no options to just have the audio 'pass through' like Compressor? Sorry if there are other posts but I have been searching forever and can not find a simple answer on this topic.
    Also, is there no way to have the source timecode burn in? Putting a filter on the video in a sequence is unacceptable, I am very displeased to find that this doesn's seem possible in AME or Premiere, it has been part of Apple's suite for years.
    Example of my preset from Compressor:
    Name: Apple ProRes 422 (Proxy)
    Description: QuickTime movie with Apple ProRes 422 (Proxy) and audio pass-through
    File Extension: mov
    Estimated size: unknown
    Audio: multi-track pass-through
    Video Encoder
              Width: (100% of source)
              Height: (100% of source)
              Pixel aspect ratio: Default
              Crop: None
              Padding: None
              Frame rate: (100% of source)
              Frame Controls: Automatically selected: Off
              Codec Type: Apple ProRes 422 (Proxy)
              Multi-pass: Off, frame reorder: Off
              Automatic gamma correction
    Progressive
              Pixel depth: 24
              Spatial quality: 50
              Min. Spatial quality: 0
              Temporal quality: 0
              Min. temporal quality: 0
    Timecode Generator
              Position: Lower Right--Title Safe
              Alpha: 1.000
              Label: Source Timecode
              Start Timecode at 00:00:00:00 false
              Text Color: r:0.0000, g:0.0000, b:0.0000
              Font: Helvetica, 36

    Hi James,
    For exporting a multitrack .wav file, you have to start a project with a multichannel audiomaster (3-16 tracks).
    Copy and paste your complete edit to the new editsetting.
    Now in the audiomixer you can route your audiolayers to the multichannel you like.
    (CH1+2 pan to left is channel 1, pan to right is channel 2 and for a stereo track pan to center : channel 1 for left and channel 2 for right.)
    Then you export your project to a 3-16 tracks multitrack .wav file.
    When you need mono tracks you can import your multitrack .wav file in premiere. Then send it to Audition (edit in Audition) and then adobe will convert the file into mono tracks.
    You'll find the mono tracks in your audio capture folder or can premiere search for then by 'reveal in explorer'.
    The multi track .wav file has got timecode within the file.
    When exporting in QT you can also choose for a multitrack audio file. It also contains your timeline timecode.
    .avi or .mp4 video files cannot be exported with more than 5.1 channels of audio
    MXF OP1a in XDCAMHD can also be exported with max. 16 channels of audio. It also contains your timeline timecode.
    Hopefully you can get further with Premiere Pro with this info.
    Succes with it!!
    gr. Mano

  • Creating Video with Multiple Audio Tracks?

    Not sure if this is the right place to post this question but I figured its compression/video codec related so someone might have an idea...
    I've used Handbrake in the past to rip a DVD with an audio commentary that allowed for multiple audio tracks that could be played back in iTunes/Quicktime (though not on the iPod Classic for some reason... perhaps someone knows the answer to this?)
    I was just curious as to whether or not this was possible to do WITHOUT first making a DVD with an 2ndary track? I was hoping to record audio commentary for one of my shorts, and put it up on the web, but wanted to avoid the step of going to dvd first then ripping it.
    is this achievable in compressor? do I need to use a third party app? thanks so much.

    ehmjay wrote:
    is there any app (be it from apple or a 3rd party tool) that will allow me to add a secondary audio track for switching in quicktime/iTunes? if so could you point me in the direction of it (or even instructions)
    I'm afraid I'm unaware of anything - outside of HandBrake - that does encode a second track of audio. But I haven't exactly had my eyes open since I haven't needed to do this for a client yet.
    handbrake mentinos that its able to rip secondary audio for use with iPod Classic/Apple TV... however so far it hasn't worked for me. Does this mean that while handbrake is doing it properly its just my iPod itself that's having the troubles (like I said that alt. audio is there in iTunes/Quicktime just not on the iPod itself)
    I am pretty sure that the issue is that the software for iPod Classics - as is the case with AppleTV and, even, QT Player - which won't allow you to switch over to the other track. But I haven't had to work with the Classic in a while, perhaps there is a setting in Audio (or Video) that gives you the pop-up option you're seeking?

  • Why I can't play video on iOS 6.0.1 but can be played on iOS 5.1.1?

    Hello,
    Before I can view the following video on my ipad Safari of iOS 5.1.1, but now can't view it on ipad Safari of iOS 6.0.1. Could you please suggest possible reason and how to fix it?
    http://techsupport.singnet.com.sg/sites/default/files/Broadband%20-%20mio%20Box% 20-%20Step1_0.mp4
    Oliver

    This solved my Problem
    https://discussions.apple.com/message/19692289#19692289

  • You tube adobe flash player updated and installed ,java script enabled but can't play videos with firefox help

    i have movies from you tube in my que but cannot watch them . I have downloaded and installed adobe flash playe ver 10 5 time and it does not work some one with the same problem said mozilla fire fox is not compatible with the new flash player should i go back to internet explore and uninstall firefox? or is this a problem with your server fix this please

    There are two different versions of Flash, one version for IE (ActiveX) and another version for all other browsers (Plugin version). You need to install the Plugin version,
    1.Download the Flash setup file from here: <br />
    [http://fpdownload.adobe.com/get/flashplayer/current/install_flash_player.exe Adobe Flash - Plugin version]. <br />
    Save it to your Desktop.<br />
    2. Close Firefox using File > Exit <br />
    then check the Task Manager > Processes tab to make sure '''firefox.exe''' is closed, <br />
    {XP: Ctrl+Alt+Del, Vista: Shift+Ctrl+ESC = Processes tab}
    3. Then run the Flash setup file from your Desktop.
    * On Vista and Windows 7 you may need to run the plugin installer as Administrator by starting the installer via the right-click context menu if you do not get an UAC prompt to ask for permission to continue (i.e nothing seems to happen). <br />
    See this: <br />
    [http://vistasupport.mvps.org/run_as_administrator.htm]

  • How can I play along with a MIDI sequence in Mainstage?

    Hi folks,
    I have some live performances where I would like to play along with MIDI sequences.  I've been using Mainstage and software instruments, but can't for the life of me figure out how do play along with MIDI sequences.  There's a nice plugin (whose name escapes me at the moment) that lets you play along with looped audio tracks....but a MIDI file would be better for my purposes.  Is there a way to do this?
    Thanks in advance,
    -Mike Kaplan

    Hi
    Not directly within Mainstage.... there could be workarounds using 3rd party applications slaved to MS, but it would be a complete pita (compared to working with scripts to iTunes Playlists or just bouncing the MIDI files to audio).
    CCT

Maybe you are looking for