Why i can't render effects in work area ? / Docking/undocking options? - Premiere CS4

Two distinct questions
I'm currently working on a project, and for some reason that I can't figure out, if I try to ''render effects'' (or ''render entire'') work area, nothing happen... May I have selected something ?
This is about my 5th or 6th time only wth Premiere (CS4) and never saw that before.
Also, how do I ''re-dock'' source and output side by side as default ? (I undocked for this project and appear not to be able to put them back as before (there is a ''undock'' option, but stupidly no ''redock''....
Thanks

Thanks very much Ann.
Definitely helpful for second point. Worked definitely Thanks!
However, for first one, I may look dumb, but ... I just can't figure out how to proceed ?
Thanks again,
Rob

Similar Messages

Why is "Render Effects in Work Area" going so slow?

I was working on a project using multicam, and I did my cuts before my color correcting and went to color and render the multicam sequence directly. After opening it in the timeline and tweaking color for awhile, I went to render the effects using the "Render Effects in Work Area" command. This was going really fast at first, and had probably made it 75% of the way through in a few minutes. However, once it hit a point, the render slowed down to only a few frames a second and the last 25% was going to take 2 hours. I cancelled and started the process over, only this time the entire render went slowly.
A few important notes:
-The total length of the sequence is about 1 hour 20 minutes, so it's not a short thing
-I've tried this on two different computers, the second one I switched to going slow from the get-go
-The first time while doing this, I (stupidly) switched to another program and (stupidly) tried to render the entire clip at once (instead of using a smaller work area). Using a smaller work area makes no difference in the speed at this point, though.
-The multicam sequence is composed of two clips, one with a luma corrector effect and a luma curve effect, the other with an luma corrector effect and an rgb curves effect
-I have tried clearing the cache
Specs:
Premiere Pro CS6 (not cc)
Late 2012 iMac running Mac OS 10.9.1 2.9GHz Intel Core i5 16 GB RAM (both computers; I'm in my university's computer lab)
NVIDIA GeForce GTX 660M 512 MB graphics card
Working from a LaCie rugged 1TB USB3.0 drive
Anyone have any ideas?

One reason I like to render my effects before export is that it helps expedite the final export and helps in the long run when I inevitably screw up the export a couple times for some reason, or when I have to re-export to a different format, with a negligible sacrifice in quality. The other is that I can more easily view how my effects affect my main sequence; right now it's too slow to play with the effects turned on.
I could just do it in the final export, and I guess I might have to at this point. And it bothers me that I'm having this problem, because it could potentially come up in other situations.

Hi, I can't figure out why I can't render on my timeline. I highlight the segment hit "Apple-R" and it gives me a weird message about "conforming HDV video...." and the bar goes as far as 60-66% and holds there forever. It never renders even partially.

Hi, I can't figure out why I can't render on my timeline. I highlight the segment hit "Apple-R" and it gives me a weird message about "conforming HDV video...." and the bar goes as far as 60-66% and holds there forever. It never renders even partially.

Yes, I know. I have been working with HDV for some time. I am wondering why it doesn't render when it needs to.. the red and bright-green lines are above, and I've set the render settings such that ANYTHING I highlight and hit apple-R will render. But its not rendering at all.

Can't render effects in FCP7 for ALL-INTRA video shot on GH3

I can't render effects on FCP 7 for footage shot on a Panasonic GH3 camera.
Original files are shot in ALL-INTRA mov files 1920x1080, 25p format. Original files are H-264, and are imported without conversion, edited on Easy Setup HD XDCAM HD 1080p25.
I can render effects on the timeline, but there is massive breakup when I export the edit.
Exporting raw files, without special effects is OK.
Any suggestions?

That camera shoots AVCHD...not AVCIntra. Only P2 cameras shoot AVCIntra.
"Original files are H-264, and are imported without conversion"
That's your problem. FCP doens't work with H.264 well. YOu need to convert the footage to ProRes, and use a ProRes timeline.

IOS 8 upgrade caused me to lose the games I paid for; apple says I hafta restore, which means losing a week of work; are there other options. the game app hooked on words will not respond to several emails

IOS 8 upgrade caused me to lose the games I paid for; apple says I hafta restore, which means losing a week of work; are there other options. the game app hooked on words will not respond to several emails

Funny you should ask... At about the same time that the Xserve was discontinued, we also lost our channel rep of nearly 14 years. Right now we are not sure who our rep is. I have however, sent this to as many people in Apple that I could think of. And I plan on continuing to reach out to as many as possible.
The sad reality is that this decision is impacting customer deployments and the future of customer installations. Apple strives for market share and loves to tout those numbers. But the numbers we fought for over these last eight years are going to disappear.
As much as this impacts our business, we are making up for it in enterprise deployment of systems. We will survive and lead in our geographic area. I do not fear that. But OS X Server is a UNIX server and with it has come all of the benefits of a UNIX system, including legitimacy in a data center. The Intel Xserve cemented this reality because of its hardware configuration and form factor. Yes, we have G4 and G5s still in service. But those are mostly in all Mac shops that understand the benefits and can work around the buzz word limitations. But fortune 100/500 IT departments did not really get on board until the release of the Intel server.
Still beating the drum to raise awareness. Spread the word and talk to your Apple reps.
Also, ask about the direction that Apple's Enterprise team is going. If the news I hear is correct, then our fears about all things pro and enterprise going away are likely true.

Why I can't render m2ts files in Adobe premiere elements 9

I'm new working with adobe. I have a Sony Handycam HDR-CX700V. I am able to import the footage into the timeline, but am not able to render. The red line doesn't apear anywhere. When I choose render work area, the adio tracks and the vidio layers just move up and down as if am scrolling, and plays for abut a second and stops without rendering anything. The resolution of compoent on the camera is set at 1080i/480i. However, I try other video formats such as VOB and the red line is there and I'm able to render, but those videos were captured with an older model camera. My system consist of an Intel(R) PENTIUM (R) CPU 2.80GHZ 2.79 GHZ Memory (RAM) 5.00 GB System type: 32-bit Operationg System and it's a Windows Vista. Somebody pleas help me

Your camcorder shoots in a number of video and audio formats, so it's important first to determine which format you're shooting in. (You say it's shooting in 1080i/480i, but that's actually two very different formats!) If you plan to edit your video in Premiere Elements, it's important that you shoot only in either 1920x1080 at 60i or 1440x1080 at 60i. Do not shoot 1920x1080 in 24p or 60p or you're going to have problems! The 720x480 AVC will also likely give your trouble.
Once you've determined which format you're shooting in, it's important to ensure that the project settings you select when you set up your project match this video format! If you don't select, for instance, AVCHD settings for AVCHD footage, these components will not automatically activate for the program.
The biggest issue, however, is that your computer is way underpowered for working with hi-def video. In my books, I even recommend a dual-core computer for working with standard definition video. For working with AVCHD, I recommend an i7 or quad core processor. Trying to edit AVCHD on a Pentium will pretty much slow your system to a crawl if it works at all. Sorry.
Although you may be able to work with very short videos, if you've got plenty of free hard drive space (I'd recommend 50 gigabytes, at least), your project is set up to match your source video and you don't mind a lot of system lag.

Video effects not working on nested sequences in Premiere Pro CS5

Hi -
I am having some trouble with Premiere ProCS5. I have a project with a few clips which I put together in one sequence. I put this sequence into another sequence. There I will add one or two tracks of additional images and apply color correction.
The problem is: None of the video effects I drag onto the sequence (which now is a nested sequence) have any effect. Whatever I change in the effect controls will not sho up in the monitor. Audio effects do work, though. Furthermore, none of the tracks above the nested clip are displayed. To clarify: The nested track is on V1, another clip is on V2 and an image is on V3. Only V1 gets displayed.
I know this is supposed to work and it actually does in another project created in the same version on the same machine with the same kind of material. But no matter how often I create a new project, applying video effects to a nested sequence just does not work.
Even more strange is the fact that my applied effects DO show up in the "Export Settings" window. They DON'T, however, in the final rendered file. I would suggest this is a bug.
What could be the reason for this behaviour?

It can help if you Toggle Track Output to ON. The visibility icon on the left side on each track.

Is the iphone explosion proof, so you can use it in hazardous work areas?

I wish to use my iphone 4 for work. I work in the oil industry and its classed as a hazardous work area. Can you use the iphone in these types of areas?

Although many users want to use iPhones, iPods and iPads in the workplace there are very real limits to it's usefulness and in your case safety.
There are many devices with ISafe or Intrisnically Safe ratings as well as HazLoc or Hazardous Locations ratings. The use of electronic devices in the petro-chemical industry is well regulated. You facilities or safety manager will tell you what devices are allowed and where. Generally when someone asks if a device is explosion proof they are not actually looking for explosion proof but hazloc. How often are you entering an area with explosive gasses under pressure or in a configned space with potential explosive gasses?
Use the right tool for the job, and in your area of work there is no Apple product that will meet even the weakest standards for safety.
Be careful, your job or your life and the lives of others is on the line!

PE8: Can't burn disc from work area only?

Am I blind? I can't seem to find anywhere an option that will let me burn a disc from the work area only... is it there somewhere?
I see that option for sharing to the web, but not when burning a disc.
I have six hours of material on the timeline and was hoping to burn three discs, but PE8 is telling me that I don't have enough disc space for all 6 hours. Well, duh, I know that, so I was planning on moving the work area over what I wanted to burn, like you can do in PrePro. No go in PE8?

Because of a major difference between PrE and PrPro, Sequences, there are things that can be done in PrPro, that PrE cannot do.
Back in PrPro 2.0, one could Burn to DVD directly. That has not been possible, as of CS3. From there on, one had to either Export/Import from PrPro to Encore, or use Adobe Dynamic Link (strengthened and improved in CS4), to author a DVD/BD.
Steve's suggestion is the best - use the WAB to Export the segments that are required per DVD, and then do separate Projects for each. Import each DV-AVI that has been Exported, via the WAB, and then just Burn to DVD, for each one. It's two more steps, but gets the job done neatly.
Good luck,
Hunt

Can Adobe After effects cs5 work with Premiere Pro CC

I have a project I created in Adobe Premiere Pro CS5 and updated to Maverick which cause Premiere Pro to crash constantly. I downloaded Adobe Premiere Pro CC and was able to reopen the file however all media edited in After Effects cs5 shows media offline even though I am able to open up After effects and access the media fine. Is there a way I can bridge them together. It seems the after effects media is still connected to Premiere pro cs5.

Dynamic Link usually only works with the same version (the same suite) of the software. You can render your AE assets into a production codec and replace the dynamically linked compositions with the rendered files.
Alternatively, install AE CC (and manually install the required 12.0.1 update to run on Mavericks) and resave the files in your CC version. (This will only work if you have a CC subscription, the update won't work on a trial version. When the 12.1.0 update is released, you will be able to run that trial on Mavericks.)

HT203477 why some part of render did not work?

hi there
I have some sequences that never render…
how can I use files in WITHOUT magnetic staff?
how can I look a audio file?

Hi amir-iphone,
Welcome to the Support Communities!
The article below may be able to help you with this issue.
Click on the link to see more details and screenshots.
iPhone: No sound or distorted sound from speaker
http://support.apple.com/kb/TS5180?viewlocale=en_US
Cheers,
- Judy

I don't know why I can't open Home Sharing working now?

I don't know what's wrong?
Today, when I turned on Apple TV, it can't connect to my iMac. (internet is workable and can be detected by Apple TV)
I tried to re-open Home Sharing, but it's strange that "Sharing" selection can't be kept in iTune List when I issued "Done".
What's wrong to my iTune? What's wrong to my Home Sharing ?
Thanks, and please help.

iPad-settings, movies, home sharing. Music-home sharing. Both under settings on the iPad. Enter your apple I'd and password in both spots. If you have a computer, turn on homesharing on iTunes as well. Homesharing has to be all turned on with the SAME apple I'd. Even if it's your iPad and a wife's iPad, pick one apple I'd and put that apple I'd in both of those spots even if it's not your iPad. Kinda confusing.

Need help working with audio channels in Premiere cs4

Hello,
I recorded audio with an analog mic, now the audio plays only on one audio channel( one speaker only) how do I fix this problem?
Thank you

Hey Mark,
Where do I find the fill right/left feature for audio?
Thanks

I can't render my sequence anymore. How can I fix this?

I'm used to Final Cut Pro, but my employer wants me to make a promotional video for them on their computers using Adobe Premiere Pro CS4. I've been using it for a few days now but now it won't let me render my sequence anymore. I try going to "Sequence" and then click on "Render Effects in Work Area" or "Render Entire Work Area" but nothing happens; it just starts playing from the beginnign without rendering. I'm pretty sure I haven't changed any settings, but is there a setting that could have changed? It's becoming a problem since I'm not able to watch what I'm editing. I've tried restarting the computer and closing any other programs, but that hasn't seemed to work. Any suggestions? Thanks for the help.

Have you got a Work Area Bar set other wise it will not render.

Some advice for quicker rendering of work area preview in AE?

Hi
I've been using premiere over the past while and gotten used to the option of 'render effects in work area' and then leaving it for a few minutes till the green bar is ready to be viewed, but now that I am using After effects, i have found that RAM preview is extremely slow, very very slow, especially when working with particle systems, is there a quicker option to select is i only wish to preview the small work area of the composition? Is RAM preview work the same way as 'render effects in work area' as in premiere or should i be using a different preview render option?
Thanks

There are numerous options in the RAM Preview pallet for creating faster previews. You can preview just the work area. You can reduce preview resolution. You can reduce preview frame rate.
You can also solo layers to preview a specific layer animation without having to render the entire composition.
Remember that AE previews in a very different way to Premiere Pro. AE loads every pixel of every preview frame into RAM before it plays, while PPro can play straight off your hard drive.

Why i can't render effects in work area ? / Docking/undocking options? - Premiere CS4

Similar Messages

Maybe you are looking for