Why I cannot preview my responsive layout project with captivate 8?

I can not preview my responsive layout project in captivate 8. It just stop on the first page. Can anyone help?

Hi,
Do you get the issue every time you create a responsive project? Can you just crease 2-3 slides with smart shapes and text caption; publish and check if there is still any error?
There are chances that the issue might be with the browser, which browser are you using to preview the content?
Chrome version 36 has similar issues with captivate html5 output. Please find the following workaround if you are using Chrome.
http://blogs.adobe.com/captivate/2014/07/update-on-captivate-html-5-content-playback-issue -in-google-chrome-browser.html

Similar Messages

Why i cannot open a PDF file even with abobe 9

why i cannot open a PDF file even with abobe 9

Please supply screen shot when it is asking for updates. (Do not send as email, use CAMERA icon). This is important, there are many fake updates.

HT201304 why I cannot conect to the iTunes store with this iPad?

why I cannot conect to the iTunes store with this iPad?
when I want to download something, always show me " cannot connect to the intues store ? What I can do now ?

Usually it's because you are not making internet connection via wifi.
Look at iOS Troubleshooting Wi-Fi networks and connections http://support.apple.com/kb/TS1398
iPad: Issues connecting to Wi-Fi networks http://support.apple.com/kb/ts3304
iOS: Recommended settings for Wi-Fi routers and access points http://support.apple.com/kb/HT4199
Additional things to try.
Try this first. Turn Off your iPad. Then turn Off (disconnect power cord) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
Change the channel on your wireless router. Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
How to Quickly Fix iPad 3 Wi-Fi Reception Problems
http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
If none of the above suggestions work, look at this link.
iPad Wi-Fi Problems: Comprehensive List of Fixes
http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
Fix iPad Wifi Connection and Signal Issues http://www.youtube.com/watch?v=uwWtIG5jUxE
 Cheers, Tom

Why I cannot activate a creative cloud bought with an spanish card in Spain?

Hi!!
My brother bought me a cretive cloud wich I couldn´t activate because it was bought with an american card. Now he bought another one with a spanish card and I cannot activate it either. And he is waiting for the money to be return from the first one.
Thanks!

Hi Rajsree
I cannot activate the CC because it says that the country where the card was got does´t match with my ID of Adobe. But the card that was used is spanish, that´s what I´m asking help with.
I cannot either remove the code from forum, I don´t know how to do it.
Thanks!
El 14/04/2014, a las 16:59, Rajshree <[email protected]> escribió:
Re: Why I cannot activate a creative cloud bought with an spanish card in Spain?
created by Rajshree in Adobe Creative Cloud - View the full discussion
Hi Noemyh,
This is redemption code, please redeem this code & activate the CC,
http://helpx.adobe.com/x-productkb/global/redemption-code-help.html
As John has mentioned, do remove the redemption code from forum.
Regards,
Rajshree
Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at http://forums.adobe.com/message/6296870#6296870
Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/6296870#6296870
To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/6296870#6296870. In the Actions box on the right, click the Stop Email Notifications link.
Start a new discussion in Adobe Creative Cloud at Adobe Community
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/thread/416458?tstart=0.

Open Captivate 6 projects with Captivate 7 error - loading video

Hi!
I have several projects created by Captivate 6 and now we upgrade to captivate 7.
When I tried to open it with Captivate 7 a Loading video window appears several times, the project is opened but I cannot to do anything because these loading videos are still in process. But nothing happens.
Can you help me?
Thanks!
videos format: .flv

Hello ,
Can you tell me where have you saved your projects ? make sure they must be opened from local computer not from any network location.
Please open a blank project and check are you able to add any video in it .
Can you tell me the eaxct version of Adobe Captivate 7 you are using (Go to Help > About Adobe Captivate)
Thanks and Regards
Himanshu Satija

Why Reaultview cannot be created in a project

Hi,
I have a procedure with RESULT VIEW that is created in SYSTEM view . But when I try to create the same procedure in Project explorer I get the error that "WITH RESULT VIEW statement is not premitted"
Is it not possible to have a RESULT VIEW inside a project ?

Hi Srivatsan,
You can create procedures with result view only in console . From project explorer, it is not possible. But you have a better option here, create your procedure in project hierarchy, create a scripted calculation view and consume the procedure inside that.
Sreehari
Message was edited by: Sreehari V Pillai

Explain to me why I cannot use my iPhone & iPads Bluetooth with other phones & MacBooks

So basically I want apple to explain to me in their logic why they have such a limitation with the Bluetooth on these devices. Earlier today, my partner connected her Nokia n8 to her MacBook Pro, it paired nicely with no errors or issues. So I decided to connect my iPhone to her MacBook Pro and then to my surprise it said that this device was to supported. I laughed at the fact that a Nokia N8 could connect to a MacBook Pro but a iPhone couldn't. Anyway, this is a Issue but the biggest issue that I find in which doesn't make sense is the fact that I can't connect my iPhone to any other phone via Bluetooth. This limitation in my mind is pointless.
Why can almost every other phone on the market communicate to any other phone on the market via Bluetooth but my iPhone can't? To be honest I have always been an android fan, due to open source reasons only. I have always liked the simplicity of the iPhone but the 3.5" screen always made me turn away from them. The latest instalment from apple with the iPhone 5 was appealing. Quick dual core CPU, beefy GPU, 1GB of RAM, great wireless technology, beautiful camera, nice & comfortable 4" screen. There is no denying it, it's a great device. So I took it up And got one, and to be honest I wasn't disappointed. But this Bluetooth limitation is ridiculous.
Please release a firmware update to remove this limitation. I am sure I am not the only one out there that finds this a inconvenience.
Thanks.

Mr limitless wrote:
Please release a firmware update to remove this limitation. I am sure I am not the only one out there that finds this a inconvenience.
You're not talking to Apple here, this is a user-to-user forum. You can send some feedback to Apple on this subject but my guess is that it won't change anything.
I believe that Apple have decided that the Bluetooth feature is there to support bluetooth headphones (so you can listen to your music wirelessly) and some peer-to-peer gaming, but that's it. The lack of bluetooth for sending your music to another device prevents copyright infringement, so perhaps that's why it's like that.
As for your point about bluetooth between your iPhone and your Mac, why would you need it? Syncing between iTunes, either by USB or Wi-Fi does what's required, so there is no need for bluetoothing files between them.
Although we're not supposed to speculate about Apple decisions here, it's pretty clear to me that copyright infringement was high on the list of reasons why that particular version of bluetooth has been used.

Captivate 8: Why am I getting a HTTP 404 Not Found error when I try to preview a responsive project?

Captivate 8: Why am I getting a HTTP 404 Not Found error when I try to preview a responsive project?

Out of curiosity, some here have recommended renaming an EXE file behind the scenes to eliminate that firewall message when starting up. Are you one of those folks that tried this? My thought is that if so, perhaps this is a result?
Cheers... Rick

Cannot Display Chinese Word if pdf preview for PLD layout.

Hi,
I am facing a problem when user pdf preview the pld layout with chinese word, the content will be blank, it will not be displayed. Print preview work fine for chinese wording.
I had tried to change the font to every chinese character through the drop down list, but it still happen the same.
I had check the pdf version, it can display chinese wording that not from SAP.
I had search in the community, but none of them meet my requirement, as most of them happen in crystal report.
Can anyone help? Anyone experience before?
Another thing is, why in the General setting > path, there is no setup for pdf?
Thanks

Hi,
Please refer SAP note for solution:
1406074 - Chinese / Japanese Characters not exported to PDF
Thanks & Regards,
Nagarajan

Why cant I preview Project files in Outlook 2013 ?

Why cant I preview Project files in Outlook 2013 ?

Hello,
Because there is no Outlook previewer available for MPP files. Typically Outlook only has previewers for default office applications.
Paul
Paul Mather | Twitter |
http://pwmather.wordpress.com | CPS |
MVP | Downloads

Why does image animation not display in project preview or published?

Most of my slides involve 4 images. I've staggered their appearance at .3, .5, .7 and .9 seconds. All works well when I preview the individual slide. But previewing the project, or publishing it, results in them all appearing simultaneously at .0 seconds. How do I correct this?
Thanks,
bberg1

Thanks for your reply. I checked the timelines and they look correct. Of course, I can see the timelines only in the preview of the individual slides, when the animation works fine. Capturing the slide preview timelines would therefore not help with the problem. Once I preview the entire project, the timelines are not accessible, and the images 4 images appear all at once at .0 seconds rather than sequentially at .3. .5 .7 and .9 as in the slide preview. What is most puzzling is that some of my projects, with the same settings as far as I can determine, work just fine in both the slide only and project preview.
Bert

Adt.bat Could not generate timestamp: Cannot parse the response

I am using the command line to build an air app as follows:
adt.bat -package -storetype pkcs12 -keystore mycert.pfx
-storepass xxx -tsa
http://timestamp.verisign.com/scripts/timstamp.dll
myApp.air myApp-app.xml myApp.swf
However, I receive this error:
Could not generate timestamp: Cannot parse the response
I am using a Verisign issued Authenticode certificate. Has
anyone got any idea why this might be happening?
Thanks

There is no previous thread running for this application
(that's the first thing I checked out). As I said in the last
message, I can successfully launch my app from within FlexBuilder3,
but not from a generated .air file install.
At your suggestion, I created a simple "Hello World" type of
Flex application in FlexBuilder3. From within FlexBuilder3, I
exported it to an AIR file and installed it. This simple
application does indeed run on my system after being installed from
the .air file.
So there's something different about this new public release
of the FlexSDK than the last bet release. I compared that simple
project contents and layout to my project. The big difference is
that all the source files for the simple project was automatically
dropped/created in a child 'src' folder under the main project
folder. I also noticed that when installed, there were files
missing for my app, but not for the simple app. The big difference
there being that only the files in the src folder were copied into
the AIR installer to be installed. Nothing outside of that folder
was part of the install codebase!
I therefore refactored my code (yet again) to move all my
source files (including my external config XML files) into a 'src'
folder under the main project folder. After a lot of tweaking in
FlexBuilder3 to get it all working again and running, I exported to
an AIR file once again. This time all the files were included, when
I ran the new installer. The application now launches successfully.
The next step is to replicate this via the command-line ADT
tool.
It would have been nice to know the changes in this area (src
folder) before going this far into the process. Unless they are
documented in some obscure release note somewhere that I am not
aware of yet.
I'll let you know how the ADT run goes when I get the chance.
Thanks for your help everyone.

Responsive design project not working in Opera or Chrome

My Captivate project in responsive design is only previewing in Internet Explorer. I have also uploaded the projects to my server and am having the same problem. Why is this?

Hi,
Chrome 36 has some issues with captivate html5 output. Please find the following workaround to fix the issue.
http://blogs.adobe.com/captivate/2014/07/update-on-captivate-html-5-content-playback-issue -in-google-chrome-browser.html
Let me know if this fixes the issue.
devraj

Cannot preview filetype please download the file for viewing and garbled text on a downloaded image

Dear Madam or Sir,
When I click on a file titled "Subject Access Request Letter re Account Number 12527629 Sort Code 60-10-34 24022015.pdf", which is stored in my Account on Acrobat.com I get the response "Cannot preview filetype please download the file for viewing". This file was created from an OpenOffice .odt document of the same title. Please advise.
I downloaded an image, which purports to be a .pdf, from the Royal Mail Track & Trace web facility using my Samsung S5. The text that I expect to see might as well be hieroglyphics for all its similarity to text. Please advise.
Regards,
Ron Platt
PS I have tried to attach both files (.pdf) but am advised "That image type is forbidden". Please advise.

Hi Laura,
I have found the solution to be:
   1. Not to upload to "Document Cloud" from the .pdf stored on my PC and
   open on screen.
   2. To login to Acrobat.com from the .pdf stored on my PC and open on
   screen, select "Document Cloud" and the sub-folder required and then upload
   the file
I have a feeling that there is a glitch somewhere, because after I have
opened a number of .pdf files stored on my PC, and irrespective of whether
I have closed them prior to opening the next .pdf file or left them open,
Acrobat Reader will display (Not responding) in the window title bar. The
"number of files" equates to less than 10. I, then, click on the X at the
right of the window title bar and I am given the option of "Close the
program" or "Wait until the program responds" (or words to that effect). If
i choose the latter, nothing happens and I am back at the unhappy status
quo. If I choose the former, I am told that Windows is searching for a
solution, which it never finds. I, then, have to shut down the PC and then
start it up, again. Clicking "Restart" does not solve the problem.
I have described the above before and received the usual "it cannot be
Acrobat, it is perfect" response. I could, I suppose, screenshot/snip every
sequential screen but why should I have to when I have described the
sequence as fully as I can. So I have found a "workaround" that does not
solve the "Not responding" problem but does solve the problem of not being
able to upload from the open .pdf file to the sub-folder in "Document
Cloud". I am, on occasion, working through the myriad of .pdf files that
are in the root folder of "Document Cloud" and putting them in the correct
sub-folder(s).
I have today read that Google is starting a cellphone service in the USA in
which a monthly "access" rental (US$20) is paid plus a GB capacity usage is
elected for at a rate specified, e.g. US$10.00/GB. If the subscriber does
not use the elected GB capacity Google refunds the US$value of the unused
elected GB capacity.
Suggestion: Adobe applies that kind of policy to its online software
package usage rates, e.g. I elect to subscribe to a particular level of
online software package usage monthly, but, if I do not use all of the
programs included in that online software usage package, I am credited back
for not having used the softwares, that I did not use, that were inclusive
in that online software package offer.
Regards,
Ron

Cannot preview on external firewire device

I just recently upgraded from Premiere Pro CS3 to CS4. Since doing so I cannot seem to get my video to display on my external firewire device. I have a Sony GV-D900 deck that I use for preview while I'm editing.
Has something changed in CS4 that would cause this not to work? If I bring up a project in CS3 the video appears instantly on the firewire deck but with CS4 I get nothing. I've checked the preferences and the two applications appear to be setup with the same options.
Has anyone else had a similar problem?

Everything seems to be setup correctly. I forgot to mention that I can capture and manipulate the deck from the Capture window so it is communicating with the deck. I just cannot see the video on the deck when previewing the timeline. If I open a project in CS3 it shows up right away.
My main purpose for previewing on the deck is I have a TV attached to the A/V outputs of the deck and it allows me to view my project on the TV while I'm working on it. Very handy. I've used it in this manor since Premiere 6.0.
The fact that I can control and capture the GV-D900 from within Premiere CS4 seems to indicate everything is set ok. I just can't figure out why I cannot see the preview.

Why I cannot preview my responsive layout project with captivate 8?

Similar Messages

Maybe you are looking for