Why I cant view my picture on my iphoto and if I try to copy to any folder it Shows "The item on the clipboard cant be pasted to this location. (One or more of the item may have been deleted or are no longer available) "

Why I cant view my picture on my iphoto and if I try to copy to any folder it Shows "The item on the clipboard cant be pasted to this location. (One or more of the item may have been deleted or are no longer available) "

There are 9 different versions of iPhoto and they run on 9 different versions of the Operating System. The tricks and tips for dealing with issues vary depending on the version of iPhoto and the version of the OS. So to get help you need to give as much information as you can. Include things like:
- What version of iPhoto.
- What version of the Operating System.
- Details. Describe the problem as fully as you can. For example, if you have a problem with exporting, then explain by describing how you are trying to export, and so on.
- History: Is this going on long? Has anything been installed or deleted? - Are there error messages?
- What steps have you tried already to solve the issue.
- Anything unusual about your set up? Or how you use iPhoto?
Anything else you can think of that might help someone understand the problem you have.

Similar Messages

  • Why i got this message even i did not use any USB. "Because a USB device was drawing too much power from your computer, one or more of your USB devices have been disabled." my os is 10.7.2. tq

    hi, anybody can help?

    createpfi wrote:
    just bought this last month. never used any USB port.
    Thanks guys
    You have AppleCare, give them a call since you are still under warranty. 

  • I plugged in my ipod and now i get the error message: Because a USB device was drawing too much power from your computer, one or more of your USB devices have been disabled" - i have a MAcBook pro and now my USB ports do not work - can anyone help me ???

    i plugged in my ipod and now i get the error message: Because a USB device was drawing too much power from your computer, one or more of your USB devices have been disabled" - i have a MAcBook pro and now my USB ports do not work - can anyone help me ???

    Sometimes you have to reset the SMC two or three times for it to work, don't know why. I've seen that error message before and 100% of the time it was fixed with an SMC reset. I suppose it's possible that your keyboard or mouse IS drawing too much power, do you have access to another you could try?

  • Cannot find the root of your orgchart. The orgchart box may have been delet

    Hi All
    I have searched to forum for similar issues, but none seem to apply to the errors I get in the CDS log.
    When try-ing to view the Orgchart, in the Orgchart Console I get the following message "Cannot find the root of your orgchart. The orgchart box may have been deleted or incorrectly specified."
    This is the entry in the CDS log.
    6/29/2010 9:26 AM:     ERROR: FieldsType : fieldName = ObjectId; tableName = PositionEmpHierarchy; : Source {.Net SqlClient Data Provider}: Message {Invalid object name 'PositionEmpHierarchy'.}
    6/29/2010 9:26 AM:     ERROR: FieldsType : fieldName = ObjectId; tableName = PositionEmpHierarchy; : Source {.Net SqlClient Data Provider}: Message {Invalid object name 'PositionEmpHierarchy'.}
    6/29/2010 9:26 AM:     ERROR: FieldsType : fieldName = ObjectId; tableName = PositionEmpHierarchy; : Source {.Net SqlClient Data Provider}: Message {Invalid object name 'PositionEmpHierarchy'.}
    6/29/2010 9:26 AM:     ERROR: FieldsType : fieldName = ObjectId; tableName = PositionEmpHierarchy; : Source {.Net SqlClient Data Provider}: Message {Invalid object name 'PositionEmpHierarchy'.}
    6/29/2010 9:26 AM:     ERROR: FieldsType : fieldName = 50000025; tableName = PositionEmpHierarchy; : Source {.Net SqlClient Data Provider}: Message {Invalid object name 'PositionEmpHierarchy'.}
    6/29/2010 9:26 AM:     ERROR: CommandProcessor.getDataSet : select top 25 ObjectId,ShortText,LongText,ParentNo,ParentName,Relation,ObjectType,Pernr,EmpAbbr,EmpName,PositionParent,Subty,Prozt,Vacan,Status from PositionEmpHierarchy where (ObjectId=50000025) order by  Upper(ObjectId)  asc, Upper(Pernr)  asc, Upper(PositionParent)  asc|DC=DestinationConnection : Source {.Net SqlClient Data Provider}: Message {Invalid object name 'PositionEmpHierarchy'.}
    Any suggestions as to what I am missing ?

    Hi Spike,
    There could be a number of reasons why the PositionEmpHierarchy table has not been created. My advice is to run an extract and then run each line of your join statements in your DB. This will highlight where the problem lies.
    Good luck!
    Luke

  • Error System "Item does not exist. It may have been deleted by another user"

    Error System "Item does not exist. It may have been deleted by another user" in sharepoint 2010
    This is problem show when User new item in List . User open new item page about 3 pages and User save each one page when page save complete , User will save another page.
    Sometime User can not save item , it show that error
    This List not have workflow and code
    Please let me know what is the issue ?

    Hi,
    Greetings. THis is a known issue and see the links for resolution
    http://support.microsoft.com/kb/972225
    http://social.technet.microsoft.com/Forums/office/en-US/638e4aa0-527c-4b20-a899-a0cf181983ec/no-item-exists-at-it-may-have-been-deleted-or-renamed-by-another-user?forum=sharepointadminlegacy
    Please remember to click 'Mark as Answer' on the answer if it helps you

  • No item exists at ... It may have been deleted or renamed by another user for new items, but older items work?

    I created a webpart page and added an SPD listformwebpart in display mode for a particular list.
    All day yerterday I called the page and passed it the ?ID= query string and it worked great. It still works great for the items I had created.
    This morning I added a workflow where I email the URL to the page with the ID dynamically on it. Any items I added today give me the error:
    No item exists at ... It may have been deleted or renamed by another user
    All items from yesterday work fine on that page with the exact url... ????
    I was demoing the solution and was completely at a loss to explain this.
    I checked and there is no Item security. I can pull up the suspect items using the native list Display page. I show up as the creator and last modifier My workflow is NOT making any changes to the list .. only sending a url to my page.
    Same URL with only the ID different..Some items work.. some don't.. Any explanation for this?
    UPDATE: I CREATED A BRAND NEW PAGE WITH NO CODE. JUST THE LISTFORMWEBPART AND THE PROBLEM PERSIST.
    ============================
    Thank You
    cyberpine.com

    Not sure if you've seen it already, but here's a step by step guide from Microsoft's help site on creating a custom form.
    http://office.microsoft.com/en-us/sharepoint-designer-help/create-a-custom-list-form-HA010119111.aspx
    The location of the custom form is really irrelevant. As I said, you don't apply security to the forms. They're applied to the list/library level or at the individual items.
    Also, SharePoint 2007 doesn't have column/field level security. Even if you customize your form or use javascript to make certain fields not-editable, it doesn't necessarily mean that's secured. Someone experienced with SharePoint can easily get around it.
    Depending on your user base or sensitivity of your data, making individual fields not-editable may not be a big deal.
    Anyways, take a look at the following article from Laura Rogers. This is one way you can make the form so that only certain fileds are editable.
    http://www.sharepoint911.com/blogs/laura/Lists/Posts/Post.aspx?List=daba3a3b-c338-41d8-bf52-cd897d000cf3&ID=3&Web=dbb90e85-b54c-49f4-8e97-6d8258116ca0
    Good luck...
    Pman
    http://www.pmansLab.com/

  • Item does not exist. It may have been deleted by another user

    Hi,
    I am getting a strange issue with the error "Item does not exist. It may have been deleted by another user " with the below code which was under "RunWithElevatedPrivileges" in a application page.
    public void test(int requestId)
    SPList list= web.Lists["test"];
    SPListItem lstItem = list.GetItemById(Convert.ToInt32(requestId)); //Error
    But when I test the above code in a console application, it is working fine & I am sure the id exist in the list.
    Can any one help me on this issue!
    Thanks In Advance,
    Kumar.

    Ok.
    Go to the sharepoint list and check the item with id is exist or not?
    Retrieve the data using another column instead of id column.
    Just for testing.
    Check the below way also
    SPQuery query = new SPQuery();
    query.Query = "<Where><Eq><FieldRef Name=\"ID\"></FieldRef><Value Type=\"Integer\">" + id.ToString(CultureInfo.InvariantCulture) + "</Value></Eq></Where>";

  • List does not exist . The page you selected contains a list that does not exists. It may have been deleted by another user

    Hi everybody!
    I have a sharepoint 2013 farm with 5 sever. I upgraded a site from sharepoint 
    2007 to sharepoint 2013. I had some problems to install and configure workflow manager and register it. but by now I found problems and I can create a workflow and run it successfully. My big problem is when I try to get a lookup field in my flow. the
    flow suspended and I got the following error:
    “List does not exist . The page you selected contains a list that does not exists. It may have been deleted by another user.”
    Any solution???
    Thanks in advance!

    Hi,
    Please make sure the source list of the lookup column and the list which consumes the content from the lookup column exists on the site collection.
    In addition, to correct this problem the following steps should be applied:
    Delete the affected Workflow association
    Go to "Central Administration" - "Application Management"
    Select the affected web application and choose "General Settings" - "Resource Throttling"
    Increase the value configured as "List View Lookup Threshold"
    Perform an iisreset to ensure that all in memory instances of the web application settings are gone
    Add the Workflow association back to the list
    More information is here:
    http://social.technet.microsoft.com/Forums/en-US/3aeeba20-07dd-4e46-941b-a3db1bb3577e/sharepoint-2013-designer-workflow-the-page-you-selected-contains-a-list-that-does-not-exist?forum=sharepointcustomization
    Best Regards
    Dennis Guo
    TechNet Community Support

  • I am trying to upload photos from my digital camera. Every time I try to plug it into my USB, the following error message comes up: "Because a usb device was drawing too much power from your computer, one or more of your USB devices have been disabled."

    I am trying to upload photos from my digital camera. Every time I try to plug it into my USB, the following error message comes up: "Because a usb device was drawing too much power from your computer, one or more of your USB devices have been disabled."
    I don't have anything else plugged into my MBP, so I am confused as to what's going on.  This problem has never happened before.  MBP is less than a year old - about 9 months old.  HELP

    Get a powered USB hub.
    https://discussions.apple.com/community/notebooks/macbook_pro?view=documents

  • HT1338 Does anyone have a fix for the error message "Because a USB device was drawing too much power from your computer one or more of your USB devices have been disabled" - this is a brand new machine with nothing connected to the USB ports - i've done u

    Hi
    does anyone know how to fix the message on my iMac:
    "Because a USB device was drawing too much power from your computer, one or more of your USB devices have been disabled."
    This is a brand new machine and did not have anything attached to the USB ports"
    Thanks for any help

    If you are getting that message on a brand new Mac with nothing connected to the USB ports, take it back. It is broken.

  • Because a USB device was drawing too much power from your computer, one or more of your USB devices have been disabled. This shows up even when I am not connected to a USB. what do you think the problem is?

    Because a USB device was drawing too much power from your computer, one or more of your USB devices have been disabled. - This is what shows up sometimes even when no USB is connected. What could be the reason?

    Try a different USB cord, seen this many many times, its highly likely a damaged USB cord.
    Restart the computer to redefine Port definition.  If still a problem
    You can also resetting PRAM/NVRAM:  http://support.apple.com/kb/ht1379
    MacBook Pro (15-inch Mid 2012), OS X Mavericks (10.9), i7 500GB 16GB RAM iPhone5 iOS7.0.3

  • SP2013: List does not exist / The page you selected contains a list that does not exist. It may have been deleted by another user

    There are dozens of entries regarding "
    List does not exist / The page you selected
    contains a list that does not exist. It may have been deleted by another user" and none of them are really SP 2013 so i thought I would create this entry. 
    I am getting the error above after creating a simple list with 4 columns.  the list is created during a new site definition activation but when I click on my list, I get the error above.  the list works if I deactivate the feature and re-activate
    it.  but has the error whenever the new site definition is created.  
    Has anybody encountered this issue on SP 2013?

    Hi，
    For your issue, there are plenty of possible reasons offered when we search this issue online.
    Here are similar issue posts, check whether they are helpful:
    http://sharepoint.stackexchange.com/questions/98239/list-does-not-exist-error-when-opening-the-views
    http://sharepoint2u.com/?p=56https://shareyourpoint.wordpress.com/2012/04/12/list-does-not-exist-the-page-you-selected-contains-a-list-that-does-not-exist-it-may-have-been-deleted-by-another-user-sharepoint-2010-error/
    http://spnovice.blogspot.com/2012/10/list-does-not-exist-or-does-it.html
    Best Regards,
    Lisa Chen
    Forum Support
    Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
    [email protected]
    Lisa Chen
    TechNet Community Support

  • "Because a USB device was drawing too much power from your computer, one  or more of your USB devices have been disabled.

    Here is the total error message:
    "Because a USB devce was drawing too much power from your computer, one
    or more of your USB devices have been disabled.
    To prevent damaging your computer, the USB device drawing too much
    power has been disabled. Other devices may have also been disabled.
    When you disconnect the device drawing too much power, your other USB
    devices will be enabled again."
    Now in contrast to every other thread on this i get this error message eveytime i connect my soundcard (interface). Not when i start up the mac or anything, just when i connect the sound card. (the soundcard does not have its own power source but note that this has never happened before and i have had this soundcard for about a year!)
    It deactivates so i cannot use it.
    I have tried:
    Connecting the soundcard to my mothers mac -> it worked!
    Connecting an external harddrive to my mac -> it worked!
    so basically, i can't be the soundcard or the cable and it cannot be the mac USB port?
    I don't know what to do! i really need this to work! anyone got an idea??

    Hi, ryankeenanrk. 
    Thank you for visiting Apple Support Communities. 
    I would recommend trying the steps in both articles below and test the results. 
    OS X Mountain Lion: Reset your computer’s PRAM
    http://support.apple.com/kb/ph11243
    Intel-based Macs: Resetting the System Management Controller (SMC)
    http://support.apple.com/kb/HT3964
    Cheers,
    Jason H. 

  • I keep getting this message : Because a USB device was drawing too much power from your computer, one or more of your USB devices have been disabled.

    I keep getting this mesage : Because a USB device was drawing too much power from your computer, one or more of your USB devices have been disabled.
    I need to charge my phone but it's not letting me!! Please help!

    Solution may be found if you search in the "More Like This" section over in the right column and in the article - http://support.apple.com/kb/HT1151. 

  • Formatting MDX report,Error=One or more axes in MDX query have been skipped

    Hi All
    Need to show the measures on row-ways instead of Column-ways in MDX report. Able to generate report with measures Column-ways.
    Getting error when tried the following:
    #) when used "{} On Rows" instead of "{} On COlumns".
    ERROR - 1200545 - One or more axes in MDX query have been skipped.
    ERROR - 1241101 - Unexpected Essbase error 1200545.
    If anyone faced something like this before, please share some work-around.
    Thanks & Regards
    sharma

    Hi,
    Take a look at this SAP Note:  1580524 - Xcelsius Dashboard does not display variable popup
    Also go through the below discussion, it may help you.
    Bex Variable PopUp does not come up launching Xcelsius dashboard
    One or more mandatory variables of query XXX no... | SCN
    Bex Variable PopUp does not come up launching Xcelsius dashboard
    BICS - Passing Mandatory Filter Variable value to a BEx Query
    Passing parameters between XCelsius dashboards using BI direct connection
    Hope this helps brother.
    Regards,
    Suman T

Maybe you are looking for