Why I face the error could note activate cellular date network
I have IPhone since three months, I bought it from Egypt and each time I lose the network signal then I catch it back I can't browse or use Internet at all ad I see error " could not activate cellular data network" even I didn't go abroad how can I fix that
Go to Settings > General > Network > Cellular Data should be "ON"
Similar Messages
-
I Have a iPhone 4s and I keep getting this error "Could not activate cellular data network" I have sprint and to use any internet om my iphone i have to connect to wifi. What do i do to fix my celluar connection. I took my sim card and put it back in and it still didnt work.
Davidb24 wrote:
Ok but im not the one who pays tge sprint bill
Apparently, no one pays it... That's why they shut off your service. -
I updated my new iPad to the iOS 6 while connected to wifi. However, it will no longer connect to the 3G network. I keep getting the message "could not activate cellular data network" even though the 3G symbol appears normal. I have tried rebooting, but it still doesn't work. Please help!
No. You can't
-
ERROR: Could not activate cellular data network: PDP authentication failure
I have an iPhone 3g that was given to me by a friend a couple months ago. Before I got the phone i was on a plan with Softbank in japan with another cell phone. When i got the iphone i unlocked it so that i could use my old sim card with the iphone. everything worked out fine, i was unable to use the internet via 3g since it wasnt on my plan but i could text and make calls with no problem.
Everything was working fine until yesterday when i started getting this error message: "Could not activate cellular data network: PDP authentication failure"
once this happened i could no longer text or make calls. my iphone recognizes the sim card, shows one bar of signal, the network, and the 3g symbol. i have also rebooted, restored, reset network settings, and talked with Softbank; all had no help.
i have no idea how to fix it, any suggestions would be awesome.
thanks.All iPhones sold in Japan are sold carrier locked and cannot be officially unlocked by the carrier. If you unlocked it, it was by unauthorized means (hacked), and support cannot be given to you in this forum.
Hacked iPhones are subject to countermeasures by Apple, particularly when updating the firmware. It is likely permanently re-locked or permanently disabled.
Message was edited by: modular747 -
Having just upgraded my iPad to IOS 6 I can no longer log onto my 3G Carrier. I get thi message "Could not activate cellular data network. You are not subscribed to a cellular data service" what can I do to rectify this?
I reset APN settings from my carrier service site and rebooted but it didn't fix the problem.
-
"Could Not Activate Cellular Data Network" in Messages App
I disabled my APN setting coz I don't want to use data network of my carrier for now.
Why do I get the error "Could Not Activate Cellular Data Network" when I go to Messages? It doesn't use data connection or internet connection since its only SMS. The pop-up error message is irritating me. Makes me think that something in Messages App also eats data in the background for some reason.Try to switch Off mms service ...
mms uses data ! -
Alert! Could not activate cellular data network.
Is anybody familiar with the alert "Could not activate cellular data network"?
It alerts my frequently when I use my old iPhone 3G. I have requested my cellular service provider to block my GPRS, and the MMS function is turned off because I don't need it. Could this be the reason and can I turn the alert off?KiltedTim wrote:
AKAJEF wrote:
Is anybody familiar with the alert "Could not activate cellular data network"?
It alerts my frequently when I use my old iPhone 3G. I have requested my cellular service provider to block my GPRS, and the MMS function is turned off because I don't need it. Could this be the reason and can I turn the alert off?
You told your provider to block data services. You get an alert that the iPhone couldn't activate the cellular data network... Makes sense to me.
If you want to stop the alert, I believe you're going to have to go into settings and turn off cellular data. I'm not positive if this will stop the alerts or not, but I believe it will.
I don't know who your provider is, but most REQUIRE a data package if you have an iPhone.
Ok, thanks. -
Please can someone help me to solve the error message "Could not activate cellular data network: PDP authentication failure"when using 3G or GPRS on safari with an iphone 4GS and latest software updates. I have tried resetting the network and phone settings. I have restored the factory settings on itunes and still the problem persists.
All iPhones sold in Japan are sold carrier locked and cannot be officially unlocked by the carrier. If you unlocked it, it was by unauthorized means (hacked), and support cannot be given to you in this forum.
Hacked iPhones are subject to countermeasures by Apple, particularly when updating the firmware. It is likely permanently re-locked or permanently disabled.
Message was edited by: modular747 -
getting error message could not activate cellular data network when trying to access the internet without using wifi. what do i need to do? i have already restore the phone.
contact your phone carrier as they handle cellular network.
-
IPHONE 5: can't receive calls and random error messages, such as "could not activate cellular data network" and "no connection - network unavailable, please connect to wifi or cellular network." This occurs even when signal strength or wifi is operational, and it does not matter whether wifi is on or off. ATT went through the standard protocol - resetting network, resetting sim card, etc. No changes. Other phones working fine in same region with same carrier. Apple's solution is to restore software, but haven't gone there yet. Anyone successfully addressed this/these issues?
I should point out that it worked when the iPhone was set back to factory settings, but when restored with the backup, data/internet no longer works again, and I get the "Could not activate cellular data network" error message yet again.
-
Hi. After I updated ios6, I couldn't use my cellular network. It said "could not activate cellular data network - You are not subscribed to a cellular data service". I don't know why. My iphone is 4s
Contact your carrier to ensure data access via their network is provisioned properly for your account and iPhone with the new iOS 6 update installed.
-
I am getting an error message with my iPhone whenever I try to access my data with no wifi. It says "could not activate cellular data network". This just started today and has never happened before. Did I change a setting or something?
Hello, romac12.
Thank you for visiting Apple Support Communities.
I have experienced this issue before. If there have been any changes to your cellular account such as adding a line, plan change or upgrade, more than likely there is a provisioning issue on the carrier end. However, I would recommend going through the troubleshooting steps in the article below. If the issue persists, see step 9.
iPhone: Troubleshooting a cellular data connection
http://support.apple.com/kb/ts3780
Cheers,
Jason H. -
I purchased an unlocked iPhone4 last month. Everything was fine till yesterday. Today morning when I tried to check mail, i suddenly got an error message saying " Could not activate cellular data network: you are not subscribed to a cellular data service", when I checked on my network settings i was not able to find the cellular data network tab ( where we use to input APN manually). i even tried to restore my iPhone to its factory settings, Still it remains the same. i cant able to connect to Internet using cellular data. help me...Plz..
Where did you purchase it from? There are lots of iPhones sold as "unlocked" which are carrier locked phones that were hacked and are not officially unlocked. These phones are subject to re-locking to the original carrier, particularly when updated.
-
Could not activate cellular data network. You are not subscribed to a cellular data service"
"Cellular Data Plan Usage…There is no data remaining on your current plan. Would you like to add more data now?"what im going to do whit this problem??I have done that and it is definitely on. My husband has the exact same phone and I upgraded his IOS at the same time, but this problem is not happening to his phone (we are also on the same plan, so our service should be the same). Our settings appear to be identical and my phone is showing the 3G symbol at the top, so I can't understand why it won't access the network.
I've turned it on and off twice and have reset all settings with my iTunes account, but it still isn't working.
I'm not a complete idiot with this sort of stuff - I have tried all the obvious things. -
My iPad2 has error message "Could not activate cellular data network : PDP authentication failure"
All iPhones sold in Japan are sold carrier locked and cannot be officially unlocked by the carrier. If you unlocked it, it was by unauthorized means (hacked), and support cannot be given to you in this forum.
Hacked iPhones are subject to countermeasures by Apple, particularly when updating the firmware. It is likely permanently re-locked or permanently disabled.
Message was edited by: modular747
Maybe you are looking for
-
DV PAL Quicktimes compression problem
I am putting out DV PAL QuickTime's, but noticing in QT pro you can tick a button in properties that makes the compression better and the pic looks less compressed. I want to know is there a way to export them out of Final Cut so that this setting is
-
...I note that I'm not alone. Apple need to provide a fix, soon I hope!!!
-
Precautions for safely upgrading your OS??
Hey there, so I suppose that this question could probably be posted on any of the other OS threads, but since it relates to Tiger I figured I'd try here. Anyway, I still currently have the last version of Panther running on my Dual 1.25 GHz G4 (yes,
-
Has the nokia 7370 been relesed?
Has the nokia 7370 been relesed, yet, cus in one of the street retailers, like phones 4 u, it says that it has been relsesed, now i need to know has it been relesed?
-
Logic Pro and Basic Audio Units
Is anyone else having an issue with Logic Pro 9.1.8 and using legacy/basic audio unit effects located in the Audio Units > Apple location? It seems as though anytime I try to use an AU* type plugin with my project the EQ freezes like it did before t