Why I get script nnt working message often and for long time computer hangs and I can't work? Any solution?
It is common many time I open link or try to attach a file to email I get script not working message. This at times not go away even I stop it and I can't close sites also. I have to close through Ctrl+Alt+Delete route.
What could be the reason and any solution?
"SELECT RcptNo FROM RcptTable WHERE ReceiptTime = '"+receipt_time+"'"
In MS Access, this exception occurs when the column names specified in the query are not correct. Check the table definition and verify the column names.
Similar Messages
-
Hi,
I’m getting the following error message when ever I try to start cs6 and the program gets close.
“Adobe Photoshop CS6 has stopped working. A problem caused the program to stop working correctly. Windows will close the program and notify you if a solution is available”
Please advise what is the problem? and How to sort this out?
OS Name
Microsoft Windows 8.1 Pro
Version
6.3.9600 Build 9600
Other OS Description
Not Available
OS Manufacturer
Microsoft Corporation
System Name
JARVIS
System Manufacturer
Dell Inc.
System Model
Inspiron N5110
System Type
x64-based PC
System SKU
To be filled by O.E.M.
Processor
Intel(R) Core(TM) i5-2450M CPU @ 2.50GHz, 2501 Mhz, 2 Core(s), 4 Logical Processor(s)
BIOS Version/Date
Dell Inc. A11, 8/3/2012
SMBIOS Version
2.6
Embedded Controller Version
1.01
BIOS Mode
Legacy
BaseBoard Manufacturer
Dell Inc.
BaseBoard Model
Not Available
BaseBoard Name
Base Board
Platform Role
Mobile
Secure Boot State
Unsupported
PCR7 Configuration
Binding Not Possible
Windows Directory
C:\Windows
System Directory
C:\Windows\system32
Boot Device
\Device\HarddiskVolume2
Locale
United States
Hardware Abstraction Layer
Version = "6.3.9600.17196"
User Name
Jarvis\JARVIS\Abhishek
Time Zone
India Standard Time
Installed Physical Memory (RAM)
4.00 GB
Total Physical Memory
3.16 GB
Available Physical Memory
1.21 GB
Total Virtual Memory
3.72 GB
Available Virtual Memory
1.55 GB
Page File Space
576 MB
Page File
C:\pagefile.sys
Hyper-V - VM Monitor Mode Extensions
Yes
Hyper-V - Second Level Address Translation Extensions
Yes
Hyper-V - Virtualization Enabled in Firmware
Yes
Hyper-V - Data Execution Protection
Yes
Display adapters:
and NVIDIA GeForce GT 525M.Without the actual crash logs nobody can say, but chances are that your graphics hardware is to blame, so update the driver...
Mylenium -
I keep getting "Unable to connect" for my firefox. It was working yesterday and I turned my computer off. I can get to the web using internet explorer 9. I don't know why my firefox is not working. Everything else is working.
A possible cause is security software (firewall) that blocks or restricts Firefox or the plugin-container process without informing you, possibly after detecting changes (update) to the Firefox program.
Remove all rules for Firefox from the permissions list in the firewall and let your firewall ask again for permission to get full unrestricted access to internet for Firefox and the plugin-container process and the updater process.
See:
*https://support.mozilla.com/kb/Server+not+found
*https://support.mozilla.com/kb/Firewalls -
It Gives me no reason this message often the first to enter my pass:" When you can not buy Equilibrium - Leonardo da Vinci's Balance Puzzle " and 27other elements. Please try again later". How can I remove this annoyng message? Maybe it's a Virus?
The old rule of thumb was to keep 10-12 GB free. Any lower than that and you will start to have trouble. I was very close to that for a long time and never had any complaints. Now, Lion "encourages" 20% free space (on my newer 250 GB drive) so I try to keep it with more than 50 GB free.
Do you still have the original memory in that machine too? The metal plate you have to remove in the battery compartment also provides access to the RAM. Your machine will take 2 GB of RAM, possibly 3. You definitely want to max that out too.
Regardless, you definitely need a new hard drive. When Apple switched to PC components, they had to take a quality hit. These 2.5" notebook hard drives are not very reliable. I'm surprised your hard drive hasn't died by now. I usually get a new hard drive with every major OS upgrade. A $ 50 investment every couple of years is no big deal.
Unfortunately, you (and I) suffer from being an early adopter in 2006. Those 32-bit machines only accept 2 GB RAM (maybe 3) and are only 32-bit so they can't be upgraded to Lion. Because of this limitation, you won't see as dramatic an improvement as you would with a 2007 machine. If you run more than a couple of applications, your hard drive is always going to have to be doing some VM work. My 2006 machine has even lost its bluetooth. I gave it to my brother. My very similar 2007 Macbook is still running great.
So, you must get a new hard drive because your old one is likely on death's door. If you don't have at least 2 GB - get it. If you can't afford a new machine, you might want to consider an SSD. That might help mitigate your RAM limitations. You can spend from $ 100 to $ 350 and get a dramatic speed improvement. -
I was useing my colne tool in apetrure when, apeture froze. I could not get it to work again, so I turned off my computer, re booted my machine and tried to open the programme again. I can not get aperture to open again and I can't open I photo either. Does anyone have any suggestions to help me get the programme running again? I have a deadline to meet this evening. Help!
I have tried both options.
When I got to point 3 I choose the library I was working on and the same error message popped up, so this option did not work.
I then tried the second suggestion and chose the repair option but as before there is no sign of a repair database grogress indicator. Where would I be able to see this and what does it look like. I can't see any evidence of anything happening on my screen.
I have also just tried the first option that comes up in the pop up box where you have to enter your password, this resulted in the same error message.
I don"t know what to do.
I don't really want to have to go for the third option where you have to rebuild you data base - Would this result in loosing images? -
I have an amazing number of duplicates - not photo - but other. How can I get rid of them? Virtually all kinds if data is duplicated often 20- to 50 times. The duplicates are bot restricted to any one kind of data.
https://discussions.apple.com/message/25888564#25888564
-
Oct 22, 2013 11:58 PM
downloaded 10.9 all well 'til I get desktop and can't enter my password, message of error, and it shuts down: reboot and error reappears"your computer restarted because of a problem. touch any key.....etc' 75-yr-old needs guidance.........running 10.8.5 til today................???????? Can run in safe boot, but what do i do now ??? thanks
MacBook Pro, OS X Mountain Lion (10.8.3), Intel core i5 2.3GHzWell, after some thought, I did a 'safe boot', did a disk verify and repair in Disk Utility, repaired permissions in DU and had the same problem I'd mentioned in post.
SO, I went back in (safe boot.........that is, hold down start button, then 'shift') and went to applications and removed or uninstalled any apps that I thought might be interferring with the re-boot or, specifically, with my being unable to sign in with my p/w.........(at the first key stroke, it would crash and give the 'error' message)....I had both Webroot and Dashlane installed that I thought could interfere with password recognition (Webroot protects from viruses, et all and Dashlane is a password codifying appl.) I took out whatever else I thought might not be friendly and, guess what ?? When I signed out of 'safe' mode, and rebooted normally, it worked.........and has been working properly for 3-4 hrs now, so guess it's good-to-go..........seems like it...........hope this helps anyone with the same problem I'd had...........no need to visit "genius bar" some 55 miles from here............guess us mid-seventies guys ain't too old for learnin'...........G'Day, Mates !! -
downloaded 10.9 all well 'til I get desktop and can't enter my password, message of error, and it shuts down: reboot and error reappears"your computer restarted because of a problem. touch any key.....etc' 75-yr-old needs guidance.........thanx
running 10.8.5 til today........................???????? Can run in safe boot, but what do i do now ??? thanksWell, after some thought, I did a 'safe boot', did a disk verify and repair in Disk Utility, repaired permissions in DU and had the same problem I'd mentioned in post.
SO, I went back in (safe boot.........that is, hold down start button, then 'shift') and went to applications and removed or uninstalled any apps that I thought might be interferring with the re-boot or, specifically, with my being unable to sign in with my p/w.........(at the first key stroke, it would crash and give the 'error' message)....I had both Webroot and Dashlane installed that I thought could interfere with password recognition (Webroot protects from viruses, et all and Dashlane is a password codifying appl.) I took out whatever else I thought might not be friendly and, guess what ?? When I signed out of 'safe' mode, and rebooted normally, it worked.........and has been working properly for 3-4 hrs now, so guess it's good-to-go..........seems like it...........hope this helps anyone with the same problem I'd had...........no need to visit "genius bar" some 55 miles from here............guess us mid-seventies guys ain't too old for learnin'...........G'Day, Mates !! -
I get the following error message when trying to instal in copy: “Creative Cloud Installer” can’t be opened because the identity of the developer cannot be confirmed.
Mac Unidentified Developer Issue
Here's how to open apps that apple should not be blocking:
http://www.imore.com/how-open-apps-unidentified-developer-os-x-mountain-lion -
I can't seem to get my headphones to work on my iPad mini when using iTunes remote.
I can stream to any Airplay capable system perfectlyvia Remote and control iTunes on my iMac as advertised.
Just want to be able to listen to iTunes on my iPad "wirelessly"Yay!
I discovered this lovely little forum entry that solved my problem!
(Remember this is for Windows, I'm not sure if the same will work for Mac)
This is what you do:
1: Have iTunes up and plug in your iPod.
2: Hold the Sleep/Wake and Home buttons down until the iPod shuts down.
3: When the screen is blank, release the Sleep/Wake and just hold the Home button down for about 15 seconds.
4: After then, iTunes will recognize an I iPod in Recovery Mode.
5: That's when iTunes will ask you to Update/Restore your iPod.
I'm pretty sure those are the steps.
(If anything is wrong, can someone fix it, please?)
But that really does work.
The writer said that his iPod was "stuck on the apple screen, and not going anywhere after that."
That was my issue, so hopefully this will work for you! -
I just updated my iTunes and now I get a message that the application has failed to start because MSVCR80.dll was not found. What happened and how do I fix this? I can't access any of my music now.
Click here and follow the instructions. You may need to completely remove and reinstall iTunes and all related components, or run the process multiple times; this won't normally affect its library, but that should be backed up anyway.
(99460) -
My iPhone 4s Bluetooth is not working, I have ios 5.1 but just can't get my Sony erricson hbh-pv715 headset to connect to the phone, the phone can't find any Bluetooth device, can you help please
Yes it's in pairing mode, it worked fine with the 3GS but doesn't seem to work with the 4s, my 4s can't find any other bluetooth device, I think the problem ls with apple?
-
Scanner is not working. message says try starting scan from computer. what do i do?
scanner is not working. message says try starting scan from computer. what do i do?
Hi,
Double post, please use the following post:
http://h30434.www3.hp.com/t5/Printer-All-in-One-Install-Setup/wants-me-to-start-scanning-from-comput...
Thanks.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem. -
HOW LONG TIME YOU NEED TO MAKE GPS TO WORK WITH OV...
Question to NOKIA:
HOW LONG TIME YOU NEED TO MAKE GPS TO WORK WITH OVI MAP 3.1 in N97?
On all N97 I know and as you can read here in forum the GPS doesn't work usable in N97 and with MAP 3.1.
I believe that this is a software problem because often I get a GPS signal inhouse and in the wood, but from one second to the other N97 lost the GPS signal. And this in the best weather condition under free sky. Sometimes gps signal works for 15 minutes, then the signal will drop every minute or so.
The current position on map is shift (past) abaout 40-50 meters from the real position, so its unable to use.
The calculated speed is always changing between 0 and the current speed.
I have updated phone to de newes software and firmware also to ne newest maps also has hard reseted and reformatet and the problem ist still the same. If I switch off the option "Maps improvment" (which SENDS DATA TO NOKIA!!!) the the drop outs are fewer. But evreytime the position on maps is shift about 40-50 Meters from right position. Is there a mistake in calculation the position? Also the speed is jumping sometimes from 0 to x and back.
CAN NOKIA TELL US WHEN THIS BUG WILL BE FIXED, AND CAN NOKIA OFFER US A REFUND.
I have payed a lot for N97 and alot for the navigation licence and a lot for accesoires and a lot for the traffic security assistance. So I want a working phone! I dint have payed money for e alpha-stadium phone.
If this is realy the quality of nokia phone, then It is the latest phone I have buyed from nokia.
By the way, the phone has many many many many other bugs as described in this forum.
Really bad work NOKIA! :-(
I was so excited with my N95 and now this mess...
NOKIA please answer us forum members, what you plan to do with the N97 bugs. When we can hope that the bugs are gone? Otherwise I will return my phone and want my money back and I sue for compensation.I have no word to disagree with you and hoping that Nokia soon will make some press statement or something else to tell us what they do with their flagship, sorry bugship Nokia N97.
Could be a shame recognize errors, but it's worst not to say nothing ant let the bad news of Nokia N97 spread for internet even if they want to sell a Nokia N97 Mini in the near future.
I understand and supose that we will no have no new version till september because we are in the last week and july and the activity in august decrease really high... but at least someone of Nokia could tell something about this problems and if it's possible all the other problems.
Why Nokia Beta Labs Forum there is a direct contact with Nokia workers, and in discussions is relly rare to find?
Yesterday is history.
Tomorrow is a mistery.
Today is a gift. -
I DON'T WANT TO UPGRADE OR HAVE AN ADD ON EVER, DISABLING UPDATES DOES NOT WORK, HOW DO I KILL ALL MESSAGES FOR UP GRADES AND ADD ON'S FOR EVER, ONCE AND FOR ALL, COMPLETELY, THE END AND NEVER BE BOTHERED AGAIN EVER! ALSO IF I KILL MYSELF I WILL HOLD YOU PERSONALTY RESPONSIBLE.edit
There is a world of information in these forums if you use the search function near the top right of this page. Just type in NAS for example and you get many threads on the subject (marked with a green checkmark if it solved the question) another example would be Airport Exterme and sound system. Once you formulate your ideas better then specific questions can be addressed one at a time. You may find that a less expensive choice for a server might be a mac mini. Good luck with your project, ask more specific questions and update you systems profile.
Maybe you are looking for
-
How can I install iOS 6 on an iPad 1
How can I install iOS 6 on an iPad 1. It is currently running iOS 5 and when I follow the directions at Apple for updating ( connect to computer, open iTunes, on summary page click software update) it just says iOS 5 is updated to current version. Do
-
Build Question: error 7 occurred at source does not exist
I have VIs built in LabVIEW 6.1. It works and built well. In LabVIEW 7, It works well. But when I try to build it. I got error. I first use the mass conpile to compile VIs and then build the exe with default settings. I got: Error 7 occurred at sourc
-
I am stuck with this problem. I have generated a large table and inserted the results of calculations into the 2D table. My next problem is then to highlight the rows and columns that contain the highest value. I have seeked advice on this matter bef
-
System Log ... what does this mean
I note in my System log I am getting the following error message continually , What is causing this and what should I do about it ? Thank you Apr 12 12:47:07 storm python[64]: * -[NSAutoreleasePool release]: This pool has already been released, do no
-
New timing features and smoothcam
I manipulated the speed of a clip with the new retiming tools in FCP. Some of the footage is a little shaky but I can't add the smoothcam filter to the clip. The clip highlights if I drop the filter on top of it but nothing happens beyond that. Any i