Why I have to "sudo rmmod iwl3945 | sudo modprobe iwl3945" when start.
my iwl3945 dosen't work if i not "sudo rmmod iwl3945 | sudo modprobe iwl3945" first when I start
the dmesg |grep iwl3945 results are following
sda: sda1 sda2 < sda5<6>iwl3945: Intel(R) PRO/Wireless 3945ABG/BG Network Connection driver for Linux, 1.2.26ks
iwl3945: Copyright(c) 2003-2008 Intel Corporation
iwl3945 0000:10:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
iwl3945 0000:10:00.0: setting latency timer to 64
iwl3945: Detected Intel Wireless WiFi Link 3945ABG
iwl3945: Tunable channels: 13 802.11bg, 4 802.11a channels
iwl3945: Failed to register network device (error -2)
iwl3945 0000:10:00.0: PCI INT A disabled
iwl3945: probe of 0000:10:00.0 failed with error -2
and lsmod | grep iwl3945
iwl3945 90100 0
rfkill 10008 1 iwl3945
mac80211 158876 1 iwl3945
led_class 5508 1 iwl3945
cfg80211 25224 2 iwl3945,mac80211
my rc.conf
MOD_AUTOLOAD="yes"
MODULES=(e100 mii iwl3945 snd-mixer-oss snd-pcm-oss snd-hwdep snd-page-alloc snd-pcm snd-timer snd snd-hda-intel soundcore )
HOSTNAME="wordog"
eth0="dhcp"
wlan0="dhcp"
INTERFACES=(!eth0,!wlan0)
DAEMONS=(syslog-ng !network hal !networkmanager wicd netfs crond @alsa sensors @fam slim @acpid mpd @httpd @mysqld net-profiles @laptop-mode)
I use Wicd for my wireless admin
t
PS: Maybe I should post this issue in another place, but now I can't turn it further. The Admin of the bbs ,please remove this post to Networking . THX
Last edited by e6nian (2008-10-20 02:51:45)
baze wrote:
e6nian wrote:
baze wrote:i have the same problem and was told by dan williams (the networkmanager guy) that this was due to the 3945 driver not using rf_kill correctly in the past and broken hal. since 2.6.27's iwl3945 now is switched to rf_kill and hal's code in git fixed aswell, it should be fixed in the next hal release, which should arrive pretty soon now.
what's your solution to this issue?
any patch for this or else?
booting with the killswitch off works for me. in this case, the device is activated by networkmanager (0.7 from trunk).
as long as i don't activated the killswitch, the device works. deactivating wifi in nm-applet and reactivating works aswell, in that case i don't have to reload the module either.
THX a lot.
And how to set booting with the killswitch? in BIOS setting or archlinux configuration?
Similar Messages
-
Why do i see missing plug ins PDF Format.aip when starting my ai
why do i see missing plug ins pdf format.aip when starting my ai
You updated your Acrobat/ Adobe Reader and it replaced one of the PDF libraries. Reinstall AI.
Mylenium -
I have MBP 17" running OS 10.9.2....... I need to have OS 10.6.8 so I can contiue running Quicken 2006. I have this on my Mac Pro but am switching to iMac and hence will dedicate laptop to finances. I pressed option when starting and got disk utilities and erased the HD..... I put in the Snow Leopard disc and pressed C when starting but then when I try and install it shows icon of my HD and says I cannot start up from that disk....... I get the same thing when I insert the #1 instal disc that came with the computer. How do I instal OS 10.6.8 (if I go recovery mode it will insatll 10.9.2 which I don't want on this laptop.
Thanks for any help.The grey disk says OS 10.6...... i tried it as well as the SL disk with the C pressed....... what happens is that it directs you to agree etc and then asks where you want it installed..... the icon of the computer HD however has the yellow exclammation sign saying I cannot start from that disk.
My super drive is working.......
Since I need to get to Quicken for taxes etc what I have done presently is formatted a LaCie rugged drive, partitioned it and when I attach that drive to the MBP and start up again I was able to install on the external drive....I am presently downloading the combo upgrade that will take me to 10.6.8
I still don't understand why it wont instal on the MBP I i know you cannot go earlier than what the machine shipped with but since this is 10.6 it should.I have a Mac Pro with one internal drive running 10.9.2 and the other 10.6.8 and I'd select the earlier system to start when I wanted to do my finances. I have upgraded to an iMac and hence cannot use that for acessing the earlier system
Interestingly, I partitioned another LaCie drive and was able when running 10.6.8 on Mac Pro to install on the external drive...... however when selecting that ext. HD for starting it never did restart with it , always restartd using the 10.9.2 system that was actiually on the other disc. -
Why Does Logic Pro Repeatedly Asks for Serial # and XSKey When Started?
I've purchased and installed an upgrade to Logic Studio 9. I previously used Logic Pro 7 but did not have it installed on my MacBook Pro when I installed Logic Studio 9.
The installer asked for the Logic Studio 9 serial number which I entered and then prompted for the original serial or XSKey. I dug out the Logic 7 XSKey, plugged it in and it was accepted so I could continue with the installation which completed successfully.
So far so good.
But now Logic Pro 9 asks for the serial number and XSKey every time I run Logic which isn't what I expect. I re-enter the new serial number and then plug in the XSKey which is accepted and the software runs as expected, but I would prefer not to have to do this every time I start the application, in particular because I don't want to carry the XSKey around with me at all times.
Why isn't Logic 9 storing my serial number? Why does it ask for the serial # and XSKey every time I start the application?
I'm not running Logic as an admin user. Could this be preventing Logic from storing the serial information?
Any help would be greatly appreciated.I had this when upgrading from 7 to 8. What I did was plugin the xskey BEFORE I started the upgrade and it never asked for a key or serial again after that.
-
Why does my iDVD project skip the main menu screen when starting?
I just finished a movie in iMovie 09, chose iDVD from the iMovie menu, chose a theme, etc., all was fine, burned the DVD and it works great except it starts the movie instantly rather than showing the opening screen with the main menu.
When you export to iDVD from iMovie 09, iMovie usually creates an iDVD project in which your movie plays automatically before the main menu is shown. As SDUser has said, you can get rid of that behaviour by going into the DVD map and dragging out the very first item.
A hint: if you have chapter markers in your movie, and you are using a theme that has motion menus, open up the Inspector (the little i button bottom left in iDVD) and while you are in the Map view click on each menu. Take a look at the length of the menu loop. There is a bug in iDVD that often causes it to make ridiculously long menu loops (in one case 3 hours, even though the menu music clip was 30 seconds and the whole movie was under an hour). That will cause iDVD to take forever rendering your project, and will waste a lot of DVD space that you are need for your main movie. Just drag the slider back to a sensible menu loop length. But go back and check before you burn; as soon as you edit anything else in the menu (for example change the music background) the loop length will have to be fixed again. -
http://www-search.net/search/search.html?pid=s&s=EA8ztrpds03TRS%2c105bc2bb-15a8-4f14-be47-992e76665fb4%2c&pi=2
This is what keeps coming up How do I prevent this. It is not on my uninstall list.Hello,
Please see:
* http://malwaretips.com/blogs/www-search-net-removal/ -
Hi, I still have problems reinstalling Final Cut Pro even though I followed these steps.
Reason why I have to reinstall is because I have repaired my Macbook Pro hard drive at a Mac Authorized Repair.
Short history of repair and my Final Cut Pro installation:
1. Macbook Pro stopped working, sendt it for repair. Had the Final Cut Pro installed,
2. Desided to try a MiniMac and recovered my backup with Time Machine, got the Final Cut Pro working.
3. Got my Macbook Pro back from repair, did backup on this one as well. But this time only the files not the Applications.
4. Removed the files as mentioned in HT5149. Didn´t find "com.apple.motionapp.plist" to remove though, but the others I found.
5. When I try to install Final Cut Pro from App Store, it downloads the application as planned. But after download it won´t show in the Application folder nor in the downloads folder, nor will it start an installation prosess. If I pause the installation in App Store, I can see the Final Cut Pro icon in my Dock. (But, as mentioned, after installation it won´t show neither here or in the Applications folder).
Any suggestions on what I should try now?
Thanks for any reply, I´m in deep water here...Sounds like there is a file you're not getting. Never do a removal manually. It's so time consuming and a pain. There's a very easy and fast way to do this, safely, properly.
Get the free "Final Cut Remover" app from Digital Rebellion (dot com), use this to remove FCP X.
Reboot the Mac.
Download from scratch.
If you're not seeing FCP X in your app folder, run Disk Utility to Repair all drives.
If that doesn't help, try running Disk Warrior from Altsoft to repair the directories on all drives. -
Why my Firefox always lack and why I have to wait for minutes to open a page?
Dear customer support officer,
Why my Firefox always lack after I have update with Window 7 Service Pack 1? ... and why I have to wait for minutes to open a page?
I discovered from the "Task Manager", every time when Firefox is lack, it took up 100% of my "CPU Useage".
Below, kindly find my version spec for your investigation convenience. Many thanks in advance for your prompt support : )
Sincerely yours,
Charmayne
Application Basics
Name
Firefox
Version
5.0
User Agent
Mozilla/5.0 (Windows NT 6.1; WOW64; rv:5.0) Gecko/20100101 Firefox/5.0
Profile Directory
Open Containing Folder
Enabled Plugins
about:plugins
Build Configuration
about:buildconfig
Extensions
Name
Version
Enabled
ID
Better Facebook!
5.852
true
[email protected]
Java Console
6.0.20
true
{CAFEEFAC-0016-0000-0020-ABCDEFFEDCBA}
Java Console
6.0.22
true
{CAFEEFAC-0016-0000-0022-ABCDEFFEDCBA}
Java Console
6.0.23
true
{CAFEEFAC-0016-0000-0023-ABCDEFFEDCBA}
Java Console
6.0.24
true
{CAFEEFAC-0016-0000-0024-ABCDEFFEDCBA}
Java Console
6.0.26
true
{CAFEEFAC-0016-0000-0026-ABCDEFFEDCBA}
RealPlayer Browser Record Plugin
14.0.3
false
{ABDE892B-13A8-4d1b-88E6-365A6E755758}
Modified Preferences
Name
Value
accessibility.blockautorefresh
true
accessibility.typeaheadfind
true
accessibility.typeaheadfind.flashBar
0
browser.history_expire_days.mirror
180
browser.places.smartBookmarksVersion
2
browser.startup.homepage
http://www.google.com/webhp?hl=en
browser.startup.homepage_override.buildID
20110615151330
browser.startup.homepage_override.mstone
rv:5.0
browser.tabs.loadInBackground
false
dom.disable_open_during_load
false
extensions.lastAppVersion
5.0
keyword.URL
http://mystart.incredimail.com/?loc=ff_address_bar&a=ICetqQnqJ0&search=
network.cookie.prefsMigrated
true
places.database.lastMaintenance
1311818987
places.history.expiration.transient_current_max_pages
64401
places.last_vacuum
1298980389
print.print_printer
Microsoft XPS Document Writer
print.printer_Microsoft_XPS_Document_Writer.print_bgcolor
false
print.printer_Microsoft_XPS_Document_Writer.print_bgimages
false
print.printer_Microsoft_XPS_Document_Writer.print_command
print.printer_Microsoft_XPS_Document_Writer.print_downloadfonts
false
print.printer_Microsoft_XPS_Document_Writer.print_edge_bottom
0
print.printer_Microsoft_XPS_Document_Writer.print_edge_left
0
print.printer_Microsoft_XPS_Document_Writer.print_edge_right
0
print.printer_Microsoft_XPS_Document_Writer.print_edge_top
0
print.printer_Microsoft_XPS_Document_Writer.print_evenpages
true
print.printer_Microsoft_XPS_Document_Writer.print_footercenter
print.printer_Microsoft_XPS_Document_Writer.print_footerleft
&PT
print.printer_Microsoft_XPS_Document_Writer.print_footerright
&D
print.printer_Microsoft_XPS_Document_Writer.print_headercenter
print.printer_Microsoft_XPS_Document_Writer.print_headerleft
&T
print.printer_Microsoft_XPS_Document_Writer.print_headerright
&U
print.printer_Microsoft_XPS_Document_Writer.print_in_color
true
print.printer_Microsoft_XPS_Document_Writer.print_margin_bottom
0.5
print.printer_Microsoft_XPS_Document_Writer.print_margin_left
0.5
print.printer_Microsoft_XPS_Document_Writer.print_margin_right
0.5
print.printer_Microsoft_XPS_Document_Writer.print_margin_top
0.5
print.printer_Microsoft_XPS_Document_Writer.print_oddpages
true
print.printer_Microsoft_XPS_Document_Writer.print_orientation
0
print.printer_Microsoft_XPS_Document_Writer.print_pagedelay
500
print.printer_Microsoft_XPS_Document_Writer.print_paper_data
1
print.printer_Microsoft_XPS_Document_Writer.print_paper_height
11.00
print.printer_Microsoft_XPS_Document_Writer.print_paper_size_type
0
print.printer_Microsoft_XPS_Document_Writer.print_paper_size_unit
0
print.printer_Microsoft_XPS_Document_Writer.print_paper_width
8.50
print.printer_Microsoft_XPS_Document_Writer.print_reversed
false
print.printer_Microsoft_XPS_Document_Writer.print_scaling
1.00
print.printer_Microsoft_XPS_Document_Writer.print_shrink_to_fit
false
print.printer_Microsoft_XPS_Document_Writer.print_to_file
false
print.printer_Microsoft_XPS_Document_Writer.print_unwriteable_margin_bottom
0
print.printer_Microsoft_XPS_Document_Writer.print_unwriteable_margin_left
0
print.printer_Microsoft_XPS_Document_Writer.print_unwriteable_margin_right
0
print.printer_Microsoft_XPS_Document_Writer.print_unwriteable_margin_top
0
privacy.sanitize.migrateFx3Prefs
true
security.default_personal_cert
Select Automatically
security.warn_viewing_mixed
false
Graphics
Adapter Description
NVIDIA GeForce G102M
Vendor ID
10de
Device ID
0873
Adapter RAM
512
Adapter Drivers
nvd3dumx,nvwgf2umx,nvwgf2umx nvd3dum,nvwgf2um,nvwgf2um
Driver Version
8.15.11.8631
Driver Date
7-1-2009
Direct2D Enabled
Blocked on your graphics driver. Try updating your graphics driver to version 257.21 or newer.
DirectWrite Enabled
false (6.1.7601.17563, font cache n/a)
WebGL Renderer
(WebGL unavailable)
GPU Accelerated Windows
0/1upgrade your browser to Firefox 8 and check
* getfirefox.com -
I have an iMac. , mid 2007. Frequently, when I take an action, the little color wheel starts spinning and goes on for quite awhile. Save a file, close a file, open a file, open a window, it's all random. Somtimes it stalls, sometimes it doesn't. Sometimes long, sometims short. Why is this happening?
Consider adding more memory. Be sure you have adequate free space on the hard drive - 15 GBs or 10% of the drive's capacity, whichever is greater. Do not run too many applications concurrently. Visit The XLab FAQs and read the FAQ on resolving the SBBOD.
Do some maintenance:
Repair the Hard Drive and Permissions
Boot from your Leopard Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer.
If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
Kappy's Personal Suggestions for OS X Maintenance
For disk repairs use Disk Utility. For situations DU cannot handle the best third-party utilities are: Disk Warrior; DW only fixes problems with the disk directory, but most disk problems are caused by directory corruption; Disk Warrior 4.x is now Intel Mac compatible. Drive Genius provides additional tools not found in Disk Warrior. Versions 1.5.1 and later are Intel Mac compatible.
OS X performs certain maintenance functions that are scheduled to occur on a daily, weekly, or monthly period. The maintenance scripts run in the early AM only if the computer is turned on 24/7 (no sleep.) If this isn't the case, then an excellent solution is to download and install a shareware utility such as Macaroni, JAW PseudoAnacron, or Anacron that will automate the maintenance activity regardless of whether the computer is turned off or asleep. Dependence upon third-party utilities to run the periodic maintenance scripts was significantly reduced since Tiger. These utilities have limited or no functionality with Snow Leopard or Lion and should not be installed.
OS X automatically defragments files less than 20 MBs in size, so unless you have a disk full of very large files there's little need for defragmenting the hard drive. As for virus protection there are few if any such animals affecting OS X. You can protect the computer easily using the freeware Open Source virus protection software ClamXAV. Personally I would avoid most commercial anti-virus software because of their potential for causing problems. For more about malware see Macintosh Virus Guide.
I would also recommend downloading a utility such as TinkerTool System, OnyX 2.4.3, or Cocktail 5.1.1 that you can use for periodic maintenance such as removing old log files and archives, clearing caches, etc.
For emergency repairs install the freeware utility Applejack. If you cannot start up in OS X, you may be able to start in single-user mode from which you can run Applejack to do a whole set of repair and maintenance routines from the command line. Note that AppleJack 1.5 is required for Leopard. AppleJack 1.6 is compatible with Snow Leopard. There is no confirmation that this version also works with Lion.
When you install any new system software or updates be sure to repair the hard drive and permissions beforehand. I also recommend booting into safe mode before doing system software updates.
Get an external Firewire drive at least equal in size to the internal hard drive and make (and maintain) a bootable clone/backup. You can make a bootable clone using the Restore option of Disk Utility. You can also make and maintain clones with good backup software. My personal recommendations are (order is not significant):
Carbon Copy Cloner
Data Backup
Deja Vu
SuperDuper!
SyncTwoFolders
Synk Pro
Synk Standard
Tri-Backup
Visit The XLab FAQs and read the FAQs on maintenance, optimization, virus protection, and backup and restore.
Additional suggestions will be found in Mac Maintenance Quick Assist.
Referenced software can be found at CNet Downloads or MacUpdate.
Be sure you have an adequate amount of RAM installed for the number of applications you run concurrently. Be sure you leave a minimum of 10% of the hard drive's capacity as free space. -
Just want to know why Apple have not made an options menu to remove duplicate photos in iPhoto? I know about downloads you can purchase to delete Dups, but I'm very interested to find out from apple themselves as to why they left this out, to die without knowing this is like having viruses on a pc or waiting for the web page to pop up on windows...
Option
A. Is it to annoy the user, to frustrate them enough to go out there and buy another apple photo product?
Or
B. Is it to annoy the user, to frustrate them enough to commit suicide, to reduce population in the world?
Is there a third reason? Can someone help me, otherwise I'll have to go with option B.sunshinecowgill wrote:
We have three operational computers, one does not have iTunes on it. Since Apple is saying I have more than 5 authorized computers, and I can't imagine what they are, I am afraid to deauthorize all my computers. See what I mean? I just wanted to ask the question about how I can find out WHICH computers Apple thinks I have authorized, so I can decide if it's safe to deauthorize them all or not.
You could have more 5 computers authorized if you ever, for example, reformatted a hard drive or replaced a hard drive without deauthorizing the computer first. Apple's system would see that as a different computer, even though you don't. There's nothing to be afraid of in deauthorizing everything and the reauthorizing what you actually have. You won't lose any data. Mistimp is correct, they can't tell you which computers are authorized. -
I have a balance on my ITunes account, but when I try to purchase music, it says my credit card will be charged. Why can't I use my current balance? and why does't it show up in the ITunes store account. It appears on my IPhone.
Well no, not from my experience. Last night, with a balance of about $42 in the iTunes store (several gift cards this summer) I purchased a 4.99 app - credit card was charged, not the balance in the iTunes store.
Barb -
I have an Apple ID, created when I recently purchased an ipad from Apple online. I used my Amex as payment method. Why can I not use my Amex as payment method when signing in to iTunes for the first time?
Yup, I'm a Kiwi, living in sunny Blenheim. Just seems odd that I can use Amex for purchasing in the Apple store but not in the iTunes store. Perhaps the higher charge set by Amex is not economic for small purchases? Anyway,
I know now what to do now - buy an iTunes gift card and enter the activation code to redeem and sign up. Sorted! Thanks Kappy for taking an interest in my query. -
Why does iTunes freeze up for minutes at a time when modifying INFO (CMD-i) ? My files are not corrupted after it is done like many other threads i have readed. Sometimes it's changing the title of a movie or editing the season and episode number of a TV show ect.....
Yup same here
I am running the latest iTunes, the latest updates to the OS and on an iMac 3.4GHz Quad core i7 with 8GB of RAM and the music stored on local HDD.
Still locks up iTunes for between 2 minutes up to 20 minutes.
Really annoying.
If you find a fix please, please let me know, I have just been throwing hardware at it with no joy at all -
Would like to know why I have twice removed from the account for $ 1
Would like to know why I have twice removed from the account for $ 1
Your post makes no sense in English.
-
Dear
I try to create my Account ID....and i don't understand why i have to put payment? before my friend create Account ID don't have to put payment they still can create account ID... and now i buy iphone but i don't have credit card that mind i can't not do itHi,
This Link explains how to Set Up an Account ID... without a credit card...
http://support.apple.com/kb/HT2534
Hope it helps,
Cheers,
Maybe you are looking for
-
Cash Discount in pricing Sales Order SKTV
Hi gurus, I need help to understand condition SKTV (Cash discount) in sales order. Requeriment is a cash discount for customer. Where do I put value to this condition for every customer? There isn't access sequence. I will reward points to anybody he
-
How to add YYMMDD format date to the file name
Hi, I need genrate the file with date suffixed to its name in YYMMDD format. The add time stamp is adding it till YYYMMDD-HHMMSSS. How can I change this format to the required one? Any suggessions. Thanks. Sri
-
Facing issue while trying to disable automatic discovery of devices through Apple Bonjour
Hi All, I am facing issue while trying to disable automatic discovery of devices through Apple Bonjour. Background: Whenever our application is in running state, devices are automatically discovered if it connects to PC. We are using Apple Bonjour's
-
HT1338 why is my MacBook Air running slow and I bought the 11 inch with all memory and turbo boost
why is my MacBook Air running slow and I bought the 11 inch with all memory and turbo boost
-
Printing Large Format Hi Res files?
I need to print a hi res file (150ppi +) at 36" x 240". The file is 556 mb. Photoshop won't even allow me to print it at this size - the "print" is grayed out in the file list. Does anyone know why this is happening and if there is a way to print