Why I see ONLY one db on my node ?

I have a PC (NT node) with 1 oracle server 8.17 , on the server I have 2 databases (db1 , db2).
With OEM I see the node ... but ONLY db1 !!!
Suggestion ? (off course I refresh node and db2 works ok)

In the iPod's About menu, the disk size is reported as slightly less than the technical specifications, this is normal for all drives. The same is true if you look at the size reported for your own computer hard drive. My 300 GB hard drive is reported as 279.36 for instance. There is also a proportion of the space on your iPod taken up by the operating software but the difference is mostly down to how the size is measured by the manufacturers.
Why the difference? Most hard disk manufacturers measure disk size this way: 1 MB = 1 million bytes (1000 * 1000). A 4 GB disk, therefore, is one that holds 4 billion bytes. Computers, including Windows computers, Macintosh computers and iPod, measure disk size this way: 1 MB = 1 048 576 bytes (1024 * 1024). The difference in these two calculations is what causes the drive to appear as 3.7 GB on a computer, but actually be a 4 billion byte disk.
You can read the whole article here: How much stuff will fit on my iPod?

Similar Messages

  • Why can i see only one picture in the illustration windows with iTunes 10.5.1?

    why can i see only one picture in the illustration windows since iTunes 10.5.1?

    Assuming Apple doesn't eviscerate the files of the secondary graphics with another upgrade, there could be a plug in that reads the graphic and runs along side iTunes..we should get someone or Apple to program an alternative If we have to accept this downgrade in iTunes proper.
    I've developed a quick workaround, and am still hoping Apple will fix this!
    Go To Get Info on the tune you want to see secondary artwork for.
    Go To the Artwork tab
    Drag the back cover to the desktop, and it will create a new jpg you can open with quick viw or prieview where you can see it large!
    you end up with a lot of jpgs on the desktop to discard!

  • I see only one WEB camera

    Hello all
    I have LV 7.1
    I installed the two same identical WEB camera.
    But in the LV I can see only one WEB camera - the first . The second cemera I don't see in the LV
    Why ?
    Respect
    Iskander

    Hey Iskander,
    Check out the following KnowledgeBase called Accessing Multiple USB Cameras That Have the Same Name, and it looks like you have the same issue of having multiple cameras with the same name. The problem lies with your specific USB camera's driver in that it is not giving the cameras a unique camera name. There are a couple of solutions in the KB.
    Also, since you are using the NI-IMAQ for USB Cameras driver, you will also want to check out some of the Known Issues that are now documented on the download page for the driver. First, this driver only supports acquiring from one USB camera at a single time, so you might want to consider using Firewire or GigE cameras. Second if you are considering using 2 USB cameras, you might be thinking that you can just acquire from one, close its session, then acquire from the other, and then go back and forth by acquiring and closing the sessions each time. But then another issue you will run into, if you do this in your program, is the second known issue of the IMAQ for USB Cameras driver, - Opening and closing a camera session causes a small memory leak, so it is not recommended to do this repeatedly.
    Regards,
    DJ L.

  • Why is there only one Operating Concern defined in GBI?

    Hi all,
    I have the following question: when looking at the CO structure of the GBI case study, why is there only one, global operating concern defined? According to the definition of an OC, it is the level whereupon profitability analysis is performed. So why is in GBI that has two very distinct business areas not at least two OCs defined (one per business area), if not more (per product)?
    As a follow-on, what is then the relation between OC and Controlling Area? I am looking for a plain English explanation that I can also use for teaching purposes.
    Thank you in advance for reading!
    Regards,
    Gerhard

    Hi Gerhard,
    I hope my reply is not too late.
    I agree with you.  Profitability analysis is typically done at a detailed level - by market segments, which may be defined by geographical segments, customer groupings, product groupings, salesforce grouping, etc.  CO-PA does support profitability analysis at such detailed levels.
    After defining an operating concern and activating it, the system generates a series of database tables for the operating concern.  I took a screenshot of the (partial) structure of the "master" table for the global GBI operating concern, GL00, from the GBI 2.2 system I am using, below:
    As you can see, with such a table structure, CO-PA is capable of capturing profitability information at a very detailed level for reporting and analysis.
    You may also notice that operating concern is not a field in the table.  The reason is, the entire table (as well as its related tables in the same series) is used only for operating concern GL00.  Its name is even hard-coded in the last 4 characters of the names of these tables.  When CO-PA reports are executed in SAP ECC, they retrieve data from only one series of tables, i.e., only data of only one operating concern can be reported.
    Back to your question: Why is there only one operating concern and not two?  The wisdom of defining one global operating concern is that profitability data of both controlling areas (Europe and North America) will be updated into the same series of database tables and reported together.  If there had been two separate operating concerns for the two controlling areas, there would have been two series of database tables, making profitability analysis across the two areas difficult, if not impossible.
    Let me know if you need further clarifications.

  • I have two devices (Iphone and Ipad) on the same Apple ID. When I go to Icloud and click at the "find Iphone" I see only one of my devices. How can I do to see both of them?

    I have two devices (Iphone and Ipad) on the same Apple ID. When I go to Icloud and click at the "find Iphone" I see only one of my devices. How can I do to see both of them?

    Obvious question, but have you got 'Find My iPhone' set on both devices?  Settings>iCloud>Find My iPhone.

  • How can I see only one album by an artist?

    How can I see only one album by an artist, in the album view?

    Hi ladybugjlt,
    Thanks for visiting Apple Support Communities.
    See the "syncing manually" section of this article for help:
    iTunes: Syncing media content to iPod
    http://support.apple.com/kb/ht1351
    Regards,
    Jeremy

  • Can see only one photo per page. How to revert to multiple images per page?

    First noticed on my iMac and now on my Macbook (10.4.9)--I'm no longer seeing a month's worth of photos on a single page. Only one photo per page, sometimes with miniature ones in the top border. I thought it was simply an inadvertent click on by part and easily corrected. But all attempts on both computers and reading of Help index haven't led to restoration of an entire page of photos and elimination of the annoyance. I'm wondering now if something I downloaded might have altered iPhoto program itself, making it impossible to view large numbers of photos at the same time. Any suggestions appreciated.
    Cap

    Cap,
    This view, with the one photo big and the thumbnail strip across the top, is what happens when you double-click a photo with "Edit in: Main Window" set in the Preferences. There should be a button visible that says either Done or Return, to exit edit mode and return you to the library. If you still see only one photo, use the size slider in the lower right corner to reduce the photo size and get more thumbnails on the page.
    If, for some reason, you can't exit the edit mode, you may have a corrupt preference file. Quit iPhoto. Use the Finder to navigate to Macintosh HD/ Users/ (your user name)/ Library/ Preferences/ com.apple.iPhoto.plist and move that file to the Trash. Launch iPhoto, and you should be returned to the main viewing mode. You'll have to go in the Preferences and reset them to your liking.
    Regards.

  • I can see only one ringtone in the custom ringtone box.plz help

    i can see only one ringtone in the custom ringtone box.plz help

    Cap,
    This view, with the one photo big and the thumbnail strip across the top, is what happens when you double-click a photo with "Edit in: Main Window" set in the Preferences. There should be a button visible that says either Done or Return, to exit edit mode and return you to the library. If you still see only one photo, use the size slider in the lower right corner to reduce the photo size and get more thumbnails on the page.
    If, for some reason, you can't exit the edit mode, you may have a corrupt preference file. Quit iPhoto. Use the Finder to navigate to Macintosh HD/ Users/ (your user name)/ Library/ Preferences/ com.apple.iPhoto.plist and move that file to the Trash. Launch iPhoto, and you should be returned to the main viewing mode. You'll have to go in the Preferences and reset them to your liking.
    Regards.

  • Where can I see the downloads LIST when downloading podcasts, like in the older version of iTunes?  I find it frustrating that I see only one at a time now !  Any suggestions please?

    Where can I see the downloads LIST when downloading podcasts,
    like in the older version of iTunes?  I find it frustrating that I see only one
    download at a time now !  Any suggestions please?

    Thanks for taking a stab at it: that didn't prove to be the problem. That option in the settings for tabbed browsing was not checked.
    I may be a bit behind the times: I am used to tabbed browsing showing all the tabs it possibly can, instead of just the last one. Sometimes it won't even show the last tab: I can have 15 tabs open, and not see a single tab. I've been confused by this into closing a window with lots of tabs open, because it looks like a single page-window.
    My main problem with the tab-bar flashing to the end of the row is that it means a great deal more mouse-clicking around to browse.
    I haven't tried installing the latest beta. Maybe that would fix the problem.
    Toddo

  • Hello, I use photoshop cc 10 days and I did a lot of files with layers and channels. For two days in two different locations that only happens in some documents when you reopen the job done no more .. Example 6 channels on the facts I see only one .. Than

    Hello, I use photoshop cc 10 days and I did a lot of files with layers and channels.
    For two days in two different locations that only happens in some documents when you reopen the job done no more .. Example 6 channels on the facts I see only one ..
    Thank you for your attention.
    Annalisa 

    Don't understand what you writing here.  Screen shoots would be most helpful.
    Supply pertinent information for quicker answers
    The more information you supply about your situation, the better equipped other community members will be to answer. Consider including the following in your question:
    Adobe product and version number
    Operating system and version number
    The full text of any error message(s)
    What you were doing when the problem occurred
    Screenshots of the problem
    Computer hardware, such as CPU; GPU; amount of RAM; etc.

  • DMS Connector for KM : I see only one document type from the document area

    Hi,
    The DMS connector is installed successfully on KM.
    I can display folder tree and documents but I see only one type of document.
    I mean, when I use transaction OAC0, I see different content repository defined in DMS.
    I wonder where is the setting that specified which content is link to the DMS connector for KM.
    Thanks in advance.

    Hello Zbynek,
    I installed the DMS once, but my experience how to use it is poor.
    In the Backend ( Transaction CV01N i think,) you can store search variants using the prefix you have defined for the DMSRM (default is KM_<theName>). This variants can be used to filter out several documents. There must be a way to give authorizations on them. Maybe you will have to use a security manager, i don't know.. in our case the user persistence (authScheme) was SAP-System an no TREX involved.
    It is not much, but maybe it helps...
    best regards
    Guido

  • Why is there only one automated audio fader at head and none at tail of some audio clips?

    When I select "Show audio animation," top left of an audio clip, on some sections I have two knobs... one at the head for fade in, and one at the tail for fade out. Why is there only one on some of the audio clips and not both? I've set up the clips the same, regarding audio animation, and some have faders at head, but not tail. How do I make another fader at the tail of a clip? Or why doesn't it automatically behave like the other audio clips that DO have two faders? I don't know what I'm doing to make them act differently.
    Thanks,
    Michael

    Tom,
    Thanks for reply. I'm attaching screen shots. For some reason my pointer didn't show up with a normal screen grab. Don't understand. Anyway, several versions are attached. There isn't one hidden on the right beyond the frame that pops out when I put my pointer there (or any tool). Strange.

  • Why cant itunes get it together? Why is there only one frank ocean video when in America there are more???

    why cant itunes get it together? Why is there only one frank ocean video when in America there are more???
    i have spent all day trying to buy or download kid Cudi's what I Am video but am being blocked every time. Why???

    Because the content providers have not released it for your country. I am guessing you are not in the US.
    This is nothing to do with Apple.

  • Why we have only one log writer in oracle

    Why we have only one log writer in oracle while we have more than one DB writer and archiver in oracle.

    skvaish1 wrote:
    Was this a interview question? Looks like to me..
    High DML allows multiple log writer processes as well by spawning multiple log writer processes.
    No - there is only one log writer process per instance.
    Don't confuse the function of I/O slaves with the function of the log writer.
    Regards
    Jonathan Lewis
    http://jonathanlewis.wordpress.com
    http://www.jlcomp.demon.co.uk
    To post code, statspack/AWR report, execution plans or trace files, start and end the section with the tag {noformat}{noformat} (lowercase, curly brackets, no spaces) so that the text appears in fixed format.
    "Science is more than a body of knowledge; it is a way of thinking"
    Carl Sagan                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                       

  • See only one (single channel) audio waveform in the timeline

    Hi, is it possible to see only one waveform in the timeline for a stereo audio file? By default you see one waveform per channel. In many cases those channels are almost the same. I would like to see mixed or only channel in the timeline to save some space and remove clutter from my screen. Thanks

    I don't think this is possible.

Maybe you are looking for

  • Mid-2009 MBP wouldn't wake. Report inside.

    Hi all, This isn't the first time this has happened, but it has been a long time since the first time. A little about my MBP: Snow Leopard 10.6.8 3.06GHz Intel Core 2 Duo 6GB 1067 MHz DDR3 2GB Apple RAM/4GB Kingston RAM (other Kingston RAM chip teste

  • Format Payments check printing program completes in warning APP-FND-00500:

    Hi All, I'm in process of converting Oracle Payables check printing from reports 6i to XML publisher. I created template, data definition and changed the output for concurrent program to XML. I tried printing check and 'Format Payments (Evergreen)' c

  • HP Pavilion elite e9220y home premium desktop; prod #: NY553AA; windows 7 64 bit

    I think my fan is 'going'? I checked online for the difference between a hard drive failure and fan failure; and I think it closest to a fan noise; the noise occurred twice in the last couple of months; not often; but often enough to scare me into wa

  • Use of marker Interface

    can any bdy plz tell me what is the use of marker interface ????

  • Partial Page Rendering

    Hi I am trying to get a column on an Advanced Table to rendered when a particular item on the region is valid. My code so far is such: String objectId = "1527"; pageContext.getParameter("objectId"); String status = pageContext.getParameter("AStatus")