Why in SE16 we can not see New Data Table for standard DSO

Hi,
We says that there is three tables (New Data Table, Active Data Table and Change Log Table) of Standard DSO, Then Why in SE16 we can not see New Data Table of Standard DSO.
Regards,
Sushant

Hi Sushant,
It is possible to see the 3 DSO tables data in through SE16. May be you do not have authorization to see data through SE16.
Sankar Kumar

Similar Messages

Can not see the data in the grid

Hi,
nice to see the new features, but I can not see the the table inserts
in the data grid - the <data> rider is not clickable.
Regards

Hi annerose,
This problem has appeared in a few other threads. It's caused by installing Release 2 Raptor over Release 1 Raptor without first deinstalling Release 1 Raptor . So what you need to do is:
1) Back up any important Raptor files, e.g. connections etc.
2) Remove the existing Raptor Rel 1 installation folder
3) Install Raptor Rel 2
Hope this helps
ady

Final user's can not see the data due to limited authorization.

We have created a InfoSet with three info Objects, 0Account, 0Costcenter and 0COMP_CODE. 0Costcenter have an attribute retail location 0RT_LOCATIO.
0RT_LOCATIO is an authorization relevant object. We as consultants can execute the infoset properly, but final user's with limited authorizations can not see the data because of authorization failier
We hae several options to solve the issue, deleselect the auth. flag in the infoobject; delete the infoobject from the attributes of the cost center or create an authorization object and assign it to the final user's profile. But we don't want to go that way.
My question is, is there any way to avoid including this attribute in the infoset definition? We are not using it in the query and we don't need it, so if we could delete it from the infoset (in the same way you add or delete infoobjects from an Infocube) without changing the cost center aster data, we will have our problem solved.
Does anyone how to do this (if possible)?
Thanks in advance!

Just do two things to find the authorization check failed for that user.
1. Execute SU53 output and find out the authoirzation check failed. If yes, please send that to BASIS Team.
2. Next one, switch on the authorization trace in ST01 and ask that user to see that data. if the user is failed with authorization issue. switch off the trace in ST01 and find out the issue.
Do this way, if it is not successful you can go for any other alternate way.
Hope this would help you.

Can not see new Power Query data sources?

Hi,
New Power Query can connect to three new data sources: Sybase IQ, Exchange, Dynamics CRM Online
http://office.microsoft.com/en-us/excel-help/whats-new-in-power-bi-ha104149776.aspx
I just installed the latest Power Query and wanted to connect to CRM Online instance. For some reason I can not see these new data sources, what am I missing?
Thanks in advance!

Hmm... I didn't think we had quite released this version yet. It's possible that that website went live before the link to the new download. There should be a blog entry about this on the "Power BI" blog in the very near future.
At the risk of providing a spoiler :), the CRM Online support is via OData.

Can not see any Data in OKE.OKE_K_FUND_ALLOCATIONS

I am looking in this table with SQLPlus and TOAD and can not see any rows.

Hi Hussein;
First I ran:
select fu.user_name, fr.responsibility_name
, fu.user_id, fr.responsibility_id resp_id
, furg.responsibility_application_id resp_appl_id, furg.security_group_id sec_group_id
from apps.fnd_user_resp_groups furg
, apps.fnd_user fu
, apps.fnd_responsibility_vl fr
where furg.user_id = fu.user_id
and upper(fu.user_name) = upper('&User_Name')
and furg.responsibility_id = fr.responsibility_id
order by 1, 3
Passing in SYSADMIN
Taking this row:
SYSADMIN,General Ledger Super User,0,20434,101,0
I ran:
I ran exec fnd_global.APPS_INITIALIZE (0,20434,101,0);
I still get no rows returned.
Is thier a way in the App to ensure the SYSADMIN,General Ledger Super User can see this data? Or am I missing something else?

Why the 2LIS_08TRTK extractor can not get all data

Hello, BW Gurus.
Why the 2LIS_08TRTK and 2LIS_08TRTLP extractors can not get all data. I had used the RSA3 and get 10 registers, when a check at the VTTK table I had 20 registers, I didnt use filters at RSA3, could you help to know what happen o correct it.

Is it because
<i>
Shipment documents and their dependent objects (shipment stages as well as shipment items [deliveries in the shipment]) are only extracted into BW when the Shipment completion status has been set.
This is necessary because the numeric values that result from the delivery documents are only established at the time. If the data were already stored earlier in BW, the shipment data would not be updated if the delivery notes were changed in BW.
</i>
- from oss note 573470.

I can not see any download Icon for Mozilla Firefox.

On your site pages there is no "download" box or icon. So, I am unable to download Mozilla Firefox.

There should be a green download button at http://www.mozilla.com
If you can not see it, you can download Firefox from http://www.mozilla.com/en-US/firefox/all.html

Why I can not see new contact that I add on my iphone on my pc?

Hi
when I add some contact on my iphone ,I can't see that on my icloud when i sign in on my pc.but vise versa is possible.

Hello pezh69,
We've an article that can help get your iCloud contacts working correctly.
iCloud: Troubleshooting iCloud Contacts
http://support.apple.com/kb/TS3998
Cheers,
Allen

Can not see new installed server on network

hi,
I have installed 2003 enterprise edition server on a virtual machine using VMWARE. Server is connceted to network and I can access it using Remote administrator but can not access it from explorer. I have checked configurations on the server and wonder what is left to do.
I would appreciate the suggestions.
Many thanks

Is your traffic crossing through any fiewalls or routers, if yes then check for acess list to permit the http port in the box.

Other user can not see the data from the workbook

Hi Friends,
I created a workbook with some worksheets in a Business area. The owner of the workbook has no problem to view all the worksheets and get all the data returned.. I granted all the neccessary privileges to other users ,they could see the workbook, but no data returnd for the query results. Tried refresh the worksheet, same no data retrieved.Checked the SQL inspector and the plan, it showed the correct paths and execution plan without any errors there. The same query run in SQL plus by other users returned data correctly.
By the way, I had a summary folder in the workbook. During the troubleshooting, I dropped this summary folder, still the same no data return for other users.
Any body happen to know the cause or has some ideas on this issue?
The discoverer administrator verson is 9.0.4.00 and the PLUS /Viewer is 9.04.45.02.
Thank you very much,
J.K

Hi All
The scheduling of reports, as you have probably noticed, requires that the scheduling privilege within Discoverer Administrator tool be granted to the user NOT to a role. Scheduling will not work if you attempt this. The reason for this is that these two SYS grants must go to a user:
GRANT SELECT ON SYS.V_$PARAMETER
GRANT EXECUTE ON SYS.DBMS_JOB
The user will also need to have these grants:
CREATE PROCEDURE,
CREATE TABLE,
CREATE VIEW,
EXECUTE ANY PROCEDURE,
UNLIMITED TABLESPACE on user's tablespace
My new Discoverer 10g Handbook, which I would recommend to anyone working with Discoverer, explains scheduling in detail and even tells you how the tables and views that are used to store the results work. You won't find this information anywhere else, as you will see if you read some of the five reviews that have been left on Amazon.com. For more information about the book please look here:
http://learndiscoverer.com/books/books.htm
The PUBLIC grants are not having any impact. All these do is ensure that ALL users have the same basic privileges. You can just as easily grant these to any role of your choosing and it will work just fine.
By the way, because the PUBLIC role is the MINIMUM privileges that a user can have you might want to consider reducing the end user Discoverer privileges afforded to PUBLIC. By default, all users can Create and Edit workbooks, share workbooks, save workbooks and so on. This is far too rich a set of privileges for the basic user, who in most cases will be a VIEWER user. Whenever I create a new EUL I always recommend that my client reduces the PUBLIC user's privileges and then create new roles for more advanced VIEWER and PLUS users, adding privileges as required.
Thus, my basic VIEWER, aka PUBLIC, has only these privileges:
Collect Query Statistics
Item Drill
Drill Out
My advanced VIEWER has this additional privilege:
Save Workbooks to Database
My basic PLUS user has all of the above, plus these (pardon the pun):
Create/Edit Query
Create Link
and my advanced PLUS users get everything, which means they now get these as well:
Grant Workbook
Schedule Workbooks
I also remove the Save / Save As Actions link from Viewer which prevents the basic VIEWER users from knowing that it is there. In essence, because these users no longer can click the Save link and because they do not have the Save to Database privilege, they will not be prompted to save within Viewer no matter what they do. This now makes 10.1.2 Viewer work the same way as previous versions.
Even though the Save link is not there, my advanced Viewer users will be prompted to save if they have made any changes. This therefore allows you to have two classes of Viewer, one who can save and one that cannot.
I hope this helps
Regards
Micahael Armstrong-Smith

Data blocks in forms 6i, can not see the data

i have built an application in forms with some data blocks. the blocks a connect to some tables in the db. i have built them connectd as "system". but when i run the applicatio as user x i can do select, insert, update, delete, but i can not se the records in the datablocks (they are empty), but i can do all transactios. why?

First of all, developing from the System schema is not a good idea.
Who owns the tables your form is connecting to? The table owner should create a public synonym for each table name, and also needs to grant user x access to the table.

Can not see historical data in Time Machine backup

Hi folks
First my setup:
   MBP Late2012
   Samsung Evo 840 SSD
   external USB 3.0 1TB as TimeMachine HD
   Mac OS X Mavericks
Now my problem.
After updating to Mavericks I've made a full backup with Time Machine.
Then I swapped the former 500TB HDD to the Samsung Evo 840 500TB.
A clean setup of Mavericks follows.
After that I restored the Backup from Time Machine.
Everything ok. Til now.
Because everthing works fine in the past, I did not control the Time Machine.
Today I wanna restore a File from my "Pictures" folder.
So I opened Time Machine.
Oops.
There I can only see the latest run.
Also in the timeline on the right side the only entries are TODAY and NOW.
I can not scroll into the past.
All windows behind the current window have a black titlebar.
In Mountain lion the titlebars are grey if there is data available
and the title contains the date of the backup.
What is the problem?
Is there a bug?
Did I something wrong?
Thanx in adv.
      Stoiker

Hi masong517
What a treasure trove of hints and solutions.
I didn't know this page.
But you are right with "E2".
This solved my problem.
Thank you very much.

Why do I need to choose a new data plan for the Galaxy Nexus?

So I've been waiting to upgrade my OG Droid to the Galaxy Nexus.
I have the "unlimited data" plan (grandfathered in). My phone is eligible for an upgrade, but when I add it to my cart, it tells me that I need to choose a new data plan because my current one isn't eligible.
I thought once you have the unlimited data, you keep it until you cancel the line or switch to a non-smartphone?
Is this an error on line or if I go to the store will the tell me the same thing?
Thanks

linearme88 wrote:
So I went to the store, and they told me the phone would be $320 instead of $250 like the online price. So, I left and called the customer service number and they told me that the order should go through with the unlimited plan selected, but it doesn't. So they made a note and said I'd have to call customer service after activating the phone to get unlimited data back on to it.
Has anyone ever had to do this? I don't want to get this with a "new" data plan only to have them tell me that they can't put unlimited data back onto it for 29.99/mo.
Thanks for the responses
How are you getting it for $250 on line? Do you have a discount or NE2 credit? Sounds like you didn't go to a coorporate store and went to a Franchise/3rd party store. They can't see employee discounts or NE2 credits.
It will be around $320 with tax and fees, and your data plan WILL stay the same in store. Since they said you have to call CSR it further makes me believe you went to a franchise or 3rd party retailer.

How to see the data records for a dso based upon the request id?

Hi all,
How to see the data records based upon the request id on the dso.
I need to see the data for a dso based upon the request id 444493 loaded from another dso through repair full update.
thanks

Hi,
Step 1: select your request from DSO request tb
Step 2: Select your DSO just above your contents/requests/reconstruction tabs
Step 3: Click contents(Spectacles symbol) in the top area of your screen
Step 4: Slect the required fields
Regards,
Suman

Can not see new table to reverse

I have a new table that has been added to an oracle database but when I go to add it to my model it is not available in the list of objects to reverse when I am on the selective reverse tab. I do have the New Datastores checkbox checked. any ideas?

I figured it out. The physical schema and work schema was defined with the schema name in lower case but should have been in uppercase.

Why in SE16 we can not see New Data Table for standard DSO

Similar Messages

Maybe you are looking for