Why installed InfoObject can't be found in InfoObjects view but ...

An InfoObject is installed and activated with some red errors, but it can be still found through RSD1, but not InfoObjects view on RSA1, why?
Thanks
Message was edited by: Kevin Smith

hey Eugene,
Below is the checking result:
INFOOBJCAT                       OBJVERS IOBJNM
0BA_SEM_PA_CHA01                 D       0BPARTNER
0BA_SEM_PA_CHA02                 D       0BPARTNER
0CA_IO_CHA02                     D       0BPARTNER
0CRM_ABC_CHA                     D       0BPARTNER
0CRM_CIC_SCR_CHA                 D       0BPARTNER
0CRM_CLUS_CHA                    D       0BPARTNER
0CRM_MKTG_CHA01                  D       0BPARTNER
0HE_SLC_CHA01                    D       0BPARTNER
0LIM_CHA01                       D       0BPARTNER
0ME_ISM_BP_CHA01                 D       0BPARTNER
0RT_PA_IO_CHA                    D       0BPARTNER
0SLL_CHA01                       D       0BPARTNER
0UC_SA_CHA01                     D       0BPARTNER
Does it help to make the InfoObject show up in InfoObjects view in RSA1?
Thanks

Similar Messages

  • HT5246 After the tool is installed, where can it be found?

    After the tool is installed, where can it be found?

    It is not anywhere on the computer where you could run it again, nor is that necessary. If you installed the removal tool, there is no need to do anythng else.

  • Why can I see photos in photo view, but now event view?

    Why can I see photos in photo view, but not in event view. The event shows up, but when I open the event, it says there are no photos in the event. The only way I can actually open a photo in the event is to be in photo view, and open the photo from that view.

    Option 1
    Back Up and try rebuild the library: hold down the command and option (or alt) keys while launching iPhoto. Use the resulting dialogue to rebuild. Choose to Rebuild iPhoto Library Database from automatic backup.
    If that fails:
    Option 2
    Download iPhoto Library Manager and use its rebuild function. This will create a new library based on data in the albumdata.xml file. Not everything will be brought over - no slideshows, books or calendars, for instance - but it should get all your albums and keywords back.
    Because this process creates an entirely new library and leaves your old one untouched, it is non-destructive, and if you're not happy with the results you can simply return to your old one. .
    Regards
    TD

  • I'm trying to reverb an audio clip in my timeline and I can't find the effect tab in the browser to drag to my audio clip to reverb. I can reverb the clip in the viewer but can't it won't drag to the timeline. I'm using FCE

    I'm trying to reverb an audio clip in my timeline and I can't find the effect tab in the browser to drag to my audio clip to reverb. I can reverb the clip in the viewer but it won't drag to the timeline. I'm using FCE

    You cannot drag the effects themselves to the timeline.  You add them to a clip in the Viewer, just as you have done. 
    If the clip was already in the timeline when you  opened it in the Viewer (by double-clicking it in the timeline to open it in the Viewer) and then added the reverb effect, there is nothing further to do, you have added the effect to the clip.  You don't drag it back to the timeline.
    You only have to drag the clip to the timeline if the clip was not already in the timeline (for example, if you opened the clip from the FCE Browser; or set different In and Out points in a master clip to use a different portion of the master clip in a different location in your timeline).
    Depending on the effect you add, you may have to render the timeline after adding the effect.  But I don't think reverb requires immediate rendering.  One other note, you said you were working with an audio clip ... audio clips need to be AIFF (not MP3 or something else) and preferably 16-bit stereo.

  • HT2490 why system preferences can't be found?

    i try to click on system preferences but i t dont do anything

    Two possibilities. 
    Either it got deleted from the Applications or Applications -> Utilities folder, or you accidentally damaged your Launchservices cache.  System cache cleaning utilities can do that.   The worst is MacKeeper, and removing it requires third party directions:
    https://discussions.apple.com/docs/DOC-3036
    Do not use system cache cleaning utilities on a system that isn't backed up.
    If you find System Preferences can't be found with one of the utilities on the bottom of this tip:
    https://discussions.apple.com/docs/DOC-1689
    http://www.charlessoft.com/ Pacifist can extract it from your 10.5 installer disc (if you are running 10.5).
    Once you extract it and put it in the right folder, run the 10.5.8 combo update from:
    http://support.apple.com/downloads/Mac_OS_X_10_5_8_Combo_Update
    If you are running 10.6, obviously use the 10.6.8 combo update:
    http://support.apple.com/kb/DL1399
    Since you posted in the 10.6 forum, but have a signature that says you are running 10.5.8, it is hard to know which link to give you.  Always make sure you post in the correct forum for your operating system, and update your signature if needed.

  • I am trying to transfer songs from my ipod to my iphone but it says the songs can not be found on the ipod but I can play them on the ipod.

    The iTunes library says I do not own them and they can not be found on my iPod. But I can still see and play the songs on the ipod. But when I try to sync them they do not appear.

    It is not possible to sync music directly between an iPod and an iPhone. The music must be in an iTunes library and that must be used to sync the music to each device.

  • How come I can see my div in design view but not in live view

    Hi,
    I have a div ID called "portfolio" that I can see in design view but not live view or on a browser. It's a little pink square and I want that square round also.
    I ran it through validator. It picked up some things in the style.css which I changed and the boilerplate.css that I did not. Because I thought DW auto creates code for boilerplate because I don't enter that code myself.
    It's also rejecting a lot of webkit code but this seems like standard webkit code that works elsewhere on the page.
    BTW: at what point does this brutal hand coding pay off in money and less heartache when Wordpress looks cleaner and is so much easier to use? I feel like I barely know HTML or CSS in terms of translating vision to reality and with all-browser functionality after months and months of on-line classes. How long are the pros at it till they reach a watershed point?
    here's my address: http://www.adjacentdimensionsmedia.com/home.html
    Here's my html:
    <body>
      <div class="gridContainer clearfix">
        <div id="div1" class="fluid"><img src="adtitle2.png" width="700" height="80" alt=""/></div>
      <div class="fluid"><div class="box-shad"><a href="index.html"></a></div>
      </div>
        <div id="portfolio">Portfolio</div>
    </body>
    Here's my CSS:
    .box-shad {
      margin-top: 200px;
      margin-left: 100px;
      width: 900px;
      height: 700px;
      display: block;
      background-image: url("images/Big-tree-trans1.png");
      background-size: 900px 700px;
      -webkit-box-shadow: 15px 15px 15px #000000 inset;
      box-shadow: 15px 15px 15px #000000 inset;
      -webkit-border-radius: 50%;
      border-radius: 50%;
      position: fixed;
    .box-shad a {
        display:block;
        width:900px;
        height:700px;
    #portfolio {
      width: 100px;
      height: 100px;
      margin-top: 0px;
      margin-right: 200px;
      margin-left: 200px;
      margin-bottom: 0px;
      border-radius: 75%;
      -webkit-border-radius: 75% 75%;
      background: pink;
      top: -300px;
      position: relative;

    The top:-300 is putting that div above the top of the browser viewport. Fix that and you'll see the div.

  • What is the "Psition Tuner" tool and why it is can't be found under Help?

    Hello,
    I'm using ID CS4 ME (middle eastern version) under OSX 10.5.6 and in my tools I see and icon that called "Position Tuner).
    I searched in Help, no such term appears there.
    I don't understand why.
    anyone?
    thank you
    Shlomit

    Hello All
    First about "position tuner tool"
    it is new tool for ME version and it is used with the new menu "Tasmeem"
    Second it is usages
    it allows users to move blocks of text, diacritics and even individual dots while preserving textual integrity and the Unicode data structure. Moreover, one can colour diacritics individually for book covers and illustrations. so you have control all over the words and dotes position
    Third i wonder why it is not exist on the ID Help even though it has a great role with who works on Arabic Text
    hope it wouldn't be a late answer and  fulfil your knowledge needs
    Thank you;
    Mai Ali
    Egypt

  • Is it possible that the thief already reset my iPhone that's why the device can't be found in find my iPhone?

    While I'm monitoring my iphone, I left it for a while. When I reload the page, "No Devices" is already written. I'm not really sure if it has been reset by the thief or i accidentally deleted it without knowing.

    ckuan wrote:
    When you iPhone is not connected to the Internet either through 3G/Wi-fi or because it is off then you cannot track it.
    If FindMyiPhone is enabled, even if the iPhone is off or not on wifi/3G, it will still show in FindMyiPhone under Devices, though it cannot be located.
    If it is not showing No Devices, FindMyiPhone is not enabled.
    If it does show in Devices and shows Offline, FindMyiPhone is enabled but it is off or not on wifi/3G.
    This is one way to remove the activation lock if you do not have the device. Delete it from FindMyiPhone in iCloud.

  • I cannot click on tabs in any website, do you know why? I can do it when using Internet Explorer but not firefox.

    I have used Mozilla Firefox for years, but all of a sudden I cannot put my curser over a tabs on any website and click on it. What I mean is the top of the websites have words you can click on to go to other pages or in the email system it has tab buttons that allow you look at your inbox or close or save draft, it doesn't allow the curser to click on it. I can go to the tool bar put my curser in that and use the tab button on the key board to tab over to each word or link and then click enter and it will then go to that next page.

    Both the Yahoo! Toolbar extension and the Babylon extension have been reported to cause an issue like that. Disable or uninstall those add-ons.
    * https://support.mozilla.com/kb/Troubleshooting+extensions+and+themes

  • My USB Tascam US-200 audio soundcard can't be found in System Preferences, but can be found in application? (Screenshots inside)

    I'm having some issues with my audio since I upgraded to Yosemite 10.10.1.
    This is currently what the sound section in my system preferences shows:
    Before I upgraded to Yosemite 10.10.1, I had an option for "US-200" on the list to select.
    I use music production software Cubase, and that application finds the sound card and allows me to play audio using it (another screen shot below)
    I'm just confused as to how an applicated on my Mac can find it, but it doesn't appear on system preferences? Is there a fix so that I can bring my system preferences to show my soundcard so that I can play music from iTunes through my Tascam US-200?
    Any help would be greatly appreciated
    Thanks

    It complains not just about one class, but about EVERY class that's loaded dynamically. When loading classes dynamically in a built exe, you have to specify their locations inside the build profile. This is what's done under "Destinations." Specifically for classes, they must ALL be either inside or outside the exe.
    Because my application is deployed to end-users, I want the classes opaque to them, so I set the destinations to be within the exe. This works fine, and the exe builds without problems, with all the classes embedded inside.
    The problem is the installer thinks all the classes that have been built into APT.exe are actually located in a system folder called "APT.exe." That's obviously wrong, so when it tries to grab those classes from a nonexistent file location, it returns an error.
    I know I'm not the only one building classes into exes, so I can't be the only one seeing this problem.
    http://linkd.in/mikele

  • Can't open PDFs in any viewer but Quicklook works

    All of a sudden I can't open PDFs in Acrobat, Preview or PDF Pen. They display fine in Quicklook, though. I can't recall anything that changed that would cause this. Ideas?

    Highlight your file>File>Get Info>
    In the Get Info window, scroll down to "Open with:"
    Unselect the "Change All..." button if you want to "Use this application to open all documents like this.”

  • Windows NT does not boot after installing NI-CAN 1.6.0 or security update

    We are running Windows NT 4.0 SP 6 english with MS IE 5.5.
    On one machine we had NI-CAN 1.6.0 installed. After installing the security update from Microsoft over the web the machine did not boot.
    On another machine the security update was installed. After installing NI-CAN 1.6.0 the machine booted but hangs during logon. On this machine we installed Windows NT, MS IE 5.5 the security update and NI-CAN from new and the effect was the same.
    Does anyone else have similar experience with this problem?
    Machines with Windows 2000 and XP work well with NI-CAN 1.6.0.
    Waldemar
    Using 7.1.1, 8.5.1, 8.6.1, 2009 on XP and RT
    Don't forget to give Kudos to good answers and/or questions

    Hi,
    I haven't found any known issues. I going to try it out here. What's the security update you're installing?. I noticed there's a bunch of them in the Microsoft web site.
    What CAN hardware do you have (PCI, PCMCIA, etc)?.
    Let me know this details and I'll try to reproduce the problem.
    DiegoF.
    National Instruments.

  • Why is useful to separate the model from the view in Swing?

    As I have read a few times, swing implements the model-view-controller pattern and I think I understand why to separate the controller from the model and view but not why to separate the model from the view, why is this useful?
    Thanks

    J_MARTINEZ wrote:
    Ok, got it but how can I control the view because for I�ve read in swing you just modify the model in the components. For example, if I have a JProgressBar and I use the method setValue(int) to fill the bar, I am modifying the proeperty value in the model but I dont have control for the view.I'm not sure I know what you mean here. If you change the model, the view will automatically update itself and display the changed value. You should have a look at some of Swing's source code such as AbstractButton and DefaultButtonModel. There you'll see that the view adds (I think, it's been a bit since I looked myself) a ChangeListener to the Model that the model uses to notify the view of any changes.

  • TS1436 When trying to burn a cd I get "disc recording not found" why and what can I do

    When trying to burn a cd I get "recording not found". Why and what can I do to change this. I do have Windows Media player loaded tried to to burn on that also but did not work.

    I have the same problem as simtagman. Would you mind looking at my diagnostics?
    Microsoft Windows 7 Home Premium Edition (Build 7600)
    Dell Inc. OptiPlex 745
    iTunes 11.0.1.12
    QuickTime not available
    FairPlay 2.2.32
    Apple Application Support 2.3.2
    iPod Updater Library 10.0d2
    CD Driver 2.2.3.0
    CD Driver DLL 2.1.3.1
    Apple Mobile Device 6.0.1.3
    Apple Mobile Device Driver not found.
    Bonjour 3.0.0.10 (333.10)
    Gracenote SDK 1.9.6.502
    Gracenote MusicID 1.9.6.115
    Gracenote Submit 1.9.6.143
    Gracenote DSP 1.9.6.45
    iTunes Serial Number 00**********DA0
    Current user is not an administrator.
    The current local date and time is 2013-01-30 20:37:00.
    iTunes is not running in safe mode.
    WebKit accelerated compositing is enabled.
    HDCP is not supported.
    Core Media is not supported. (16005)
    Video Display Information
    Intel Corporation, Intel(R)  Q965/Q963 Express Chipset Family
    Intel Corporation, Intel(R)  Q965/Q963 Express Chipset Family
    **** External Plug-ins Information ****
    No external plug-ins installed.
    iPodService 11.0.1.12 is currently running.
    iTunesHelper 11.0.1.12 is currently running.
    Apple Mobile Device service 3.3.0.0 is currently running.
    **** CD/DVD Drive Tests ****
    No drivers in LowerFilters.
    UpperFilters: GEARAspiWDM (2.2.3.0),
    D: SONY DVD-ROM DDU1615S, Rev EDS3
    Audio CD in drive.
    Found 12 songs on CD, playing time 47:22 on Audio CD.
    Track 1, start time 00:02:00
    Track 2, start time 03:58:33
    Track 3, start time 08:07:13
    Track 4, start time 11:52:03
    Track 5, start time 17:18:13
    Track 6, start time 20:39:28
    Track 7, start time 23:42:71
    Track 8, start time 28:40:61
    Track 9, start time 32:44:72
    Track 10, start time 37:00:26
    Track 11, start time 40:09:35
    Track 12, start time 43:05:43
    Audio CD reading succeeded.
    Get drive speed succeeded.
    <Edited by Host>

Maybe you are looking for