Why internet has always to be manually conected

I wonder why I always have to connect to my home network manually instead it does automatically can you please help me to know why it does that.

Wi-Fi ??
Open System Preferences > Network
Select Automatic from the Location pop up menu.
Then click Advanced then select the Wi-Fi tab.
Drag your network name to the top of the list and click OK.

Similar Messages

  • Internet Has Always Been Slow

    I am on the BT option 2 with the HH3 And in setting up the enginer said "you should be getting speeds of around 4mbs - 9mbs" 
    Well I am getting very poor speeds. 
    Downstream:
    2.25 Mbps
    Upstream:
    448 Kbps
    ADSL Settings
    VPI/VCI:
    0/38
    Type:
    PPPoA
    Modulation:
    G.992.1 Annex A
    Latency type:
    Interleaved
    Noise margin (Down/Up):
    10.8 dB / 19.0 dB
    Line attenuation (Down/Up):
    51.9 dB / 31.5 dB
    Output power (Down/Up):
    18.6 dBm / 12.5 dBm
    FEC Events (Down/Up):
    20713 / 67
    CRC Events (Down/Up):
    27 / 17
    Loss of Framing (Local/Remote):
    0 / 0
    Loss of Signal (Local/Remote):
    0 / 0
    Loss of Power (Local/Remote):
    0 / 0
    HEC Events (Down/Up):
    40 / 12
    Error Seconds (Local/Remote):
    66 / 54
    When I was getting it I was hoping for A Download of around 5-9 and an upload speed of 1mbs+ I post video on to YouTube, I had a 400mb video and YouTube said I have 7 hours remaining. It says I have 2.25mbs Download but downloads are downloading at 150kbs
    My upload speed is 0.36 constant, It has never changed.
    What can I do to improve my download speed AND upload speed?

    you need to connect to the test socket to eliminate any internal wiring problems that could be a cause of interference causing disconnections and reduction of speed your noise margin will reduce when you get the noise issues resolved we also need to see your connection time shown on your hubstats could you please repost full stats again also please work through this link and post back the results of the tests
    Here is a basic guide to getting help from the community members done by CL Keith Please read through the link posted http://forumhelp.dyndns.info/speed/first_steps.htm​l
    once you have posted the information asked for then the community members can help you more
    Thank You
    This is a customer to customer self help forum the only BT presence here are the forum moderators
    If you want to say thanks for a helpful answer,please click on the Ratings star on the left-hand side If the reply answers your question then please mark as ’Mark as Accepted Solution’

  • No issues, but curious..why do I always get permissions repaired when I click on 'repair permissions in Disk Utility......it usually has to do with core permissions and it's happened since i got this MacBook Pro in 3/11..it continues with 10.7

    No issues, but curious..why do I always get permissions repaired when I click on 'repair permissions' in Disk Utility ??......it usually has to do with core permissions and it's happened since i got this MacBook Pro in 3/11..I'll try this every 2/3 wks and always get repairs.....yet, I don't really have issues....it's been weird.......it continues with 10.7 and the update to 10.7.1.. a sample:
    Permissions differ on “System/Library/CoreServices/RemoteManagement/ARDAgent.app/Contents/Support/Rem ote Desktop Message.app/Contents/Resources/da.lproj/UIAgent.nib”; should be -rw-r--r-- ; they are drw-r--r-- .
    Repaired “System/Library/CoreServices/RemoteManagement/ARDAgent.app/Contents/Support/Rem ote Desktop Message.app/Contents/Resources/da.lproj/UIAgent.nib”
    Permissions differ on “System/Library/CoreServices/RemoteManagement/AppleVNCServer.bundle/Contents/Su pport/LockScreen.app/Contents/Resources/da.lproj/MainMenu.nib”; should be -rw-r--r-- ; they are drw-r--r-- .
    Repaired “System/Library/CoreServices/RemoteManagement/AppleVNCServer.bundle/Contents/Su pport/LockScreen.app/Contents/Resources/da.lproj/MainMenu.nib”
    Permissions differ on “System/Library/CoreServices/RemoteManagement/AppleVNCServer.bundle/Contents/Su pport/LockScreenLeopard386.app/Contents/Resources/da.lproj/MainMenu.nib”; should be -rw-r--r-- ; they are drw-r--r-- .
    Repaired “System/Library/CoreServices/RemoteManagement/AppleVNCServer.bundle/Contents/Su pport/LockScreenLeopard386.app/Contents/Resources/da.lproj/MainMenu.nib”
    Group differs on “Library/Preferences/com.apple.alf.plist”; should be 80; group is 0.
    Repaired “Library/Preferences/com.apple.alf.plist”
    Warning: SUID file “System/Library/CoreServices/RemoteManagement/ARDAgent.app/Contents/MacOS/ARDAg ent” has been modified and will not be repaired.

    As described in this article, don't worry about it:
    http://support.apple.com/kb/TS1448?viewlocale=en_US

  • Why am I getting messages such as "The command "Image Size" is not currently available" when trying to run an Action that has always worked in the past and when the particular Commands do work if used by themselves?

    Why am I getting messages such as "The command Image Size is not currently available whenever I try to run an Action that uses the particular command (and which has always worked fine previously) and when the particular command works fine when used on its own?

    I would think that image size would always be available when there is an active document in Photoshop.  The only time I remember seeing messages like that where they should work was during the five month period when Adobe released CS6 with so many bugs which took Adobe five months to fix.  During those five month messages like that that should not have happen were common when action switch between documents.  Adobe would start processing the next Action step before the document switch completed, Any step that required an active document could fail with a mess stating the command is not available.
    Are you by some chance using CS6 version 13.0 CS6 without any updates.  Use Photoshop menu Help>About Photoshop.  If it shows CS6 version 13.0 you need to update CS6. .

  • I sold my ipod (which has always been backed up to Itunes/computer)and am waiting for my new ipad.  Do I have to manually download all my apps on the ipad, or will itunes sync my old ipod apps/music to the ipad?

    I sold my ipod (which has always been backed up to itunes/computer) and am waiting for a new Ipad.
    Do I have to manually download all my apps on the ipad, or will itunes allow me to sync my old ipod apps and music to the ipad?

    Welcome to the Apple Community.
    You can sync your music and apps from iTunes. However since you are moving from an iPod to an iPad, many of the apps will have iPad versions which you will need to redownload.

  • Why can't I log in to the itunes store it has always worked in the past? gives me and error and closes the program

    Why Can't I log in to the I-Tunes store it has always worked in the past?  It gives me an error then closes I-Tunes
    Thanks

    Hello gidgetfarms,
    Thank you for using Apple Support Communities.
    For more information, take a look at:
    Can't connect to the iTunes Store
    http://support.apple.com/kb/ts1368
    Have a nice day,
    Mario

  • I have an Iphone 4 and my internet has not worked for a good 10 months, why wont it work? my dad pays for my data plan, so its not that i dont pay my bill. I've even tried to reset my net work settings, and that did not work

    i have an iphone 4 and my internet has not worked for a good 10 months, why wont it work? My dad pays for my data plan, so its not that i dont pay the bill. I've even tried to rest my net work settings, and that did not work. I went to AT&T and they said that the only way to fix it was to buy a new phone, and im not going to buy a new phone with out my upgrade. someone, please help!

    Hey lilmissindian!
    I have an article for you here that will help you troubleshoot this issue:
    iPhone: Troubleshooting a cellular data connection
    http://support.apple.com/kb/ts3780
    Thanks for coming to the Apple Support Communities!
    Cheers,
    Braden

  • HT4199 My iphone has always connected automatically without problem to the wifi network at work, i.e.BTBusinessHub, and at home, i.e.Bthomehub. Now it tries to connect at work but doesnt manage it although it still works at home. Can anyone advise why?

    My iphone has always connected automatically and without problem to the wifi at work i.e. BTBusinesshub and at home BTHomehub but yesterday it would not connect at work. It is ok at home but again today at work it is not connecting. It appears to try but is not connecting, please help.

    You can try doing a reset, hold down the home/power button until you see the apple logo and then release, then wait for the phone to boot back up - then check wifi - if that doesn't work then
    do a network reset note:  you will have to reenter wifi password again when your in range.
    settings - general - reset - reset network settings.  If that doesn't work then I would talk to your IT dept.

  • Any suggestions why Internet Radio on Apple TV 2 is not working?

    Hi - I've had my Apple TV2 for over a year now. Everything has always worked fine without any issues until about a month ago when the Internet Radio feature simply stopped working. I have no idea why - all software is up to date, I've checked the network connections, conducted the test, etc., and everything works. I can still use my iTunes library, watch movies, use YouTube, etc. Just the radio function in the Internet section stopped working.
    The error message I get is "Cannot access Internet Radio stations. Check your network configurations and try again." I've checked the configurations, and everything works like a charm, but I still get the error message.
    Any suggestions greatly appreciated!

    jason.james wrote:
    Hi - I've had my Apple TV2 for over a year now. Everything has always worked fine without any issues until about a month ago when the Internet Radio feature simply stopped working. I have no idea why - all software is up to date, I've checked the network connections, conducted the test, etc., and everything works. I can still use my iTunes library, watch movies, use YouTube, etc. Just the radio function in the Internet section stopped working.
    The error message I get is "Cannot access Internet Radio stations. Check your network configurations and try again." I've checked the configurations, and everything works like a charm, but I still get the error message.
    Any suggestions greatly appreciated!
    Time flies when you're having fun, but it's not been out a year yet so should be still under warranty.
    Before getting repair/replacement from Apple, try a factory reset by hooking it up to computer using a microUSB lead alone, starting iTunes and restoring software to (current) factory settings.
    Unless there's been a change to your network/router/firewall i can't see any obvious reason for it to stop playing internet radio unless the software's corrupted some how.  Guess you've tried unpowering from the mains then restarting it which can sometimes fix odd problems?
    AC

  • WRT54GS port lights always on, internet light always on, only power connected.

    My WRT54GS v.2 wireless router has all port lights and internet light always on, even though the power is the only cable connected to it. The router won't detect the internet from my dsl modem. How can i fix this please, why is this happening ?
    thank you. 

    Did you try to reset the router by pushing and holding the reset button for 30 seconds or more?
    Richard Aichner (Ikester)

  • I have wifi in my home and it has always worked fine. Then I went to Ireland and used the iPad there.  Since I have been home, it won't work in the house. I took it to another location where I have logged in before and it worked perfectly.  Any ideas?

    I have wi-fi in my home and it has always worked fine with my iPad.  Then I went to Ireland and used the iPad there.  Since I have been home, it won't work in my house.  I can't get my wi-fi connecton.  I took it to anothe location where I have logged in in the past, and it worked perfectly.  Any ideas as to why I can't get a connection at home?
    Thank you.

    Some things to try first:
    1. Turn Off your iPad. Then turn Off (disconnect power cord for 30 seconds or longer) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
    2. Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
    3. Change the channel on your wireless router (Auto or Channel 6 is best). Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
    4. Go into your router security settings and change from WEP to WPA with AES.
    5.  Renew IP Address: (especially if you are droping internet connection)
        •    Launch Settings app
        •    Tap on Wi-Fi
        •    Tap on the blue arrow of the Wi-Fi network that you connect to from the list
        •    In the window that opens, tap on the Renew Lease button
    6. Potential Quick Fixes When Your iPad Won’t Connect to Your Wifi Network
    http://ipadinsight.com/ipad-tips-tricks/potential-quick-fixes-when-your-ipad-won t-connect-to-your-wifi-network/
    ~~~~~~~~~~~~~~~~~~~~~~~~~
    Wi-Fi Fix for iOS 6
    https://discussions.apple.com/thread/4823738?tstart=240
    iOS 6 Wifi Problems/Fixes
    How To: Workaround iPad Wi-Fi Issues
    http://www.theipadfan.com/workaround-ipad-wifi-issues/
    Another Fix For iOS 6 WiFi Problems
    http://tabletcrunch.com/2012/10/27/fix-ios-6-wifi-problems-ssid/
    Wifi Doesn't Connect After Waking From Sleep - Sometimes increasing screen brightness prevents the failure to reconnect after waking from sleep. According to Apple, “If brightness is at lowest level, increase it by moving the slider to the right and set auto brightness to off.”
    Fix For iOS 6 WiFi Problems?
    http://tabletcrunch.com/2012/09/27/fix-ios-6-wifi-problems/
    Did iOS 6 Screw Your Wi-Fi? Here’s How to Fix It
    http://gizmodo.com/5944761/does-ios-6-have-a-wi+fi-bug
    How To Fix Wi-Fi Connectivity Issue After Upgrading To iOS 6
    http://www.iphonehacks.com/2012/09/fix-wi-fi-connectivity-issue-after-upgrading- to-ios-6.html
    iOS 6 iPad 3 wi-fi "connection fix" for netgear router
    http://www.youtube.com/watch?v=XsWS4ha-dn0
    Apple's iOS 6 Wi-Fi problems
    http://www.zdnet.com/apples-ios-6-wi-fi-problems-linger-on-7000004799/
    ~~~~~~~~~~~~~~~~~~~~~~~
    How to Boost Your Wi-Fi Signal
    http://ipad.about.com/od/iPad_Troubleshooting/a/How-To-Boost-Your-Wi-Fi-Signal.h tm
    Troubleshooting a Weak Wi-Fi Signal
    http://ipad.about.com/od/iPad_Troubleshooting/a/Troubleshooting-A-Weak-Wi-Fi-Sig nal.htm
    How to Fix a Poor Wi-Fi Signal on Your iPad
    http://ipad.about.com/od/iPad_Troubleshooting/a/How-To-Fix-A-Poor-Wi-Fi-Signal-O n-Your-iPad.htm
    iOS Troubleshooting Wi-Fi networks and connections  http://support.apple.com/kb/TS1398
    iPad: Issues connecting to Wi-Fi networks  http://support.apple.com/kb/ts3304
    WiFi Connecting/Troubleshooting http://www.apple.com/support/ipad/wifi/
    How to Fix: My iPad Won't Connect to WiFi
    http://ipad.about.com/od/iPad_Troubleshooting/ss/How-To-Fix-My-Ipad-Wont-Connect -To-Wi-Fi.htm
    iOS: Connecting to the Internet http://support.apple.com/kb/HT1695
    iOS: Recommended settings for Wi-Fi routers and access points  http://support.apple.com/kb/HT4199
    How to Quickly Fix iPad 3 Wi-Fi Reception Problems
    http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
    iPad Wi-Fi Problems: Comprehensive List of Fixes
    http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
    Connect iPad to Wi-Fi (with troubleshooting info)
    http://thehowto.wikidot.com/wifi-connect-ipad
    Fix iPad Wifi Connection and Signal Issues  http://www.youtube.com/watch?v=uwWtIG5jUxE
    Fix Slow WiFi Issue https://discussions.apple.com/thread/2398063?start=60&tstart=0
    How To Fix iPhone, iPad, iPod Touch Wi-Fi Connectivity Issue http://tinyurl.com/7nvxbmz
    Unable to Connect After iOS Update - saw this solution on another post.
    https://discussions.apple.com/thread/4010130
    Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
    Wi-Fi or Bluetooth settings grayed out or dim
    http://support.apple.com/kb/TS1559
    ~~~~~~~~~~~~~~~
    If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
     Cheers, Tom

  • Why does Firefox always block any link I try to open going to a web page when I don't have pop up blocker on?

    Why does Firefox always block any link I try to open going to a web page when I don't have pop up blocker on? First off they are not even pop ups....your crap blocks everything and don't save user names &/or passwords when you have it checked. Also in your tutorials about solving this issue says it has the word "OPTION" .......no, it never says option to allow you to bypass it and etc. Only thing is says is "ALLOW" . That would be nice , but the problem is it will not allow it from then on. It only allows it right then and then you have to refresh...after that to open again it blocks it again.....HOW STUPID?!!!!!
    It always say that this is preventing this page from automatically redirecting to another page. THIS IS WHAT I AM TRYING TO DO...GO TO ANOTHER PAGE........I DON'T NEED YOUr BROWSERS PERMISSION TO DO THAT. THAT IS WHAT A *%#$&*(&*%$$%% BROWSER IS FOR TO GO TO OTHER PAGES......THEY ARE NOT POP UPS!!!!!
    YOU STUPID BROWSER ACTUALLY BLOCKS EVERYTHING AND THAT SUX!!!
    HELP!!

    Are you using "Clear history when Firefox closes"?
    In case you are using "Clear history when Firefox closes":
    *do not clear the Cookies
    *do not clear the Site Preferences
    *Tools > Options > Privacy > Firefox will: "Use custom settings for history": [X] "Clear history when Firefox closes" > Settings
    *https://support.mozilla.org/kb/Clear+Recent+History
    Note that clearing "Site Preferences" clears all exceptions for cookies, images, pop-up windows, software installation, and passwords.
    Clearing cookies will remove all specified (selected) cookies including cookies with an allow exception that you want to keep.
    Let all cookies expire when you close Firefox.
    *Firefox/Tools > Options > Privacy > Cookies: Keep until: I close Firefox
    You can choose to keep third-party cookies from visited sites if necessary.
    Create a cookie 'allow' exception for cookies that you want to keep.
    *Firefox/Tools > Options > Privacy > Cookies: Exceptions

  • My Facetime has always worked and now all the sudden when I try to log on from my Macbook it says the server has encountered an error with the server registration. This will not allow me to sign in. Anyone know how to fix this?

    My Facetime will not work on my Macbook Pro. This has always worked in the past and now all the sudden it says that I have encountered a problem with the server and registration. I tried to check the date and time zone which is correct and I have no restrictions set.

    I have the same issue. Does anybody know why this has happened

  • Why data has not been copied from staging DB to Reporting DB even timer job status is success ?

    Hello,
    I am facing following issue regarding web analytic service for specific date 2014-08-18:
    Verified following services which are running and status was success on that specific date 2014-08-18 :
    Web Analytics Service
    Microsoft Usage Data Import
    Microsoft SharePoint Foundation Usage Data Processing
    Observed latest Web Analytics Setting as below :
    LastAggregationDateId 
    20140817 -   The date id of the last successfully completed data aggregation
    LastAggregationTime
    2014-08-18T00:00:13.210 - The time of the last successfully completed data aggregation
    LastBestBetSuggestionAggregationDateId
    20140818 - The date id of the last successfully completed best bet suggestion data aggregation. This date id should not be reset to an earlier date manually.
    LastDataCopyTime
    2014-08-17T23:59:09.693 - The last time the data were copied from the staging databases to this reporting database for aggregation
    Above settings says that Data has not copied from Staging DB to Reporting DB on Date 2014-08-18
    In order to verify the same I have checked as follow:
    SELECT COUNT (*) FROM [dbo].[WATrafficAggregationByDate] WITH (NOLOCK)
    WHERE  [DateId] = 20140818
    Above SQL Query has returned ZERO value.
    Can anyone please let me know Why data has not been copied from staging DB to Reporting DB even timer job status is success ?
    Your help will be much appreciated.
    Thanks and Regards,
    Dipti Chhatrapati

    The image itself has the answer
    The user requests a page, and the action gets picked up by the Web Analytics service that runs on SharePoint.
    The Web Analytics service logs this in the “.usage” files.
    A Timer job called “Microsoft SharePoint Foundation Usage Data Import” by default runs every 30 minutes. It imports the logs into the staging database.
    Each night the “Microsoft SharePoint Foundation Usage Data Processing” Timer job runs and transforms the data into the reporting database.
    The last run time of the import from staging and the aggregation is logged in the Settings table in the Reporting database.
    Usage and Health Data Collection Service Application collects Data about Usage and Health of your farm.
    This information is used for Health Monitoring and this is also required for running the Web Analytics Service. If you do not have a Usage and Health Data Collection Service Application or your
    Usage and Health Data Collection Proxy is stopped, you will not see any data in the Web Analytics Report
    Regards Chen V [MCTS SharePoint 2010]

  • Why does Bridge always sort images by rating instead of by date modified?

    Why does Bridge always sort images by rating instead of by date modified?
    This drives me bonkers.  Everytime I look for an image I've been working on, I go to Bridge and I'm always presented with the images sorted by rating instead of by date.
    Then I click on the microscopic sized, extremely tiny arrow that allows one to choose 'sort by date modified' and I resort them to find the file I need.  So that's always 3 extra clicks to find the image.
    WHY can't Bridge sort images by date modified and STAY that way every time I come back?
    Thanks for any help.
    I know I could just keep the recent files rated the highest, but still, I'm wondering if there's a way to make it work the way I'd like it to work?
    jn
    p.s.  Note to Adobe: Please make the selection button for sorting images arrow larger than a fraction of the size of the period at the end of this sentence.  Thanks.

    WHY can't Bridge sort images by date modified and STAY that way every time I come back?
    By default it does stay at the latest selected sort order so this could mean it is due to your install.
    First of all try to reset the preferences for Bridge, hold down option key while restarting Bridge and choose reset preferences. This sets it all to default. First try if the problem is solved then set prefs again to your own custom wishes.
    Also check and repair permissions for the OSX itself (Apple has disk utility in the utility folder for this job, and there are other 3th party applications)
    And be sure to have the latest update for Bridge. (Bridge CS5 should be 4.0.5.11)
    In addition to the method Tai Lao pointed you already to there is a third option, use right click mouse button in content window and the pop up menu has also the sort option at the bottom of the row

Maybe you are looking for