Why iPad upgraded IOS7 the charging take much longer time?

I upgraded my iPad3 to IOS 7, everything seems fine, just the charging is much much slower. I'm using all genuine Apple's charger. Don't know why.

Try this - Reset the iPad by holding down on the Sleep and Home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons. (This is equivalent to rebooting your computer.) No data/files will be erased.
 Cheers, Tom

Similar Messages

It takes much longer time to power down.

Since i upgraded to mountainlion it takes much longer time to power down. As if the harddisk is being scanned. Anyone any thoughts on that ?
greetz,

Since i upgraded to mountainlion it takes much longer time to power down. As if the harddisk is being scanned. Anyone any thoughts on that ?
greetz,

Installing the printer takes a long time and then the installation fails

Installing the printer takes a long time to complete installation and although I used Genuine disk and a new printer
System Windows 8
Please help
Is there could be missing from the file system
How to Get it

Hi,
What is your printer model?
Do you try installing it via USB or through the network?
Does the installation stalls or hangs before or after selecting the crequired connection type for the printer?
Say thanks by clicking the Kudos thumb up in the post.
If my post resolve your problem please mark it as an Accepted Solution

Why Safari takes much long time than other browser to open a page?

I have used windows since start of my computing life... Now i have replaced my windows laptop to a macbook pro.. Everything is amazing.. except only one. Safari.. I experience it takes too long time for openning a webpage...even for a simple webpage...takes much more time for loading a flash... I dont know why Safari is taking too many times as compared to other web browsers...

I found the same problem too after moving into mac earlier this week....
i guess here's the solution https://discussions.apple.com/thread/5227588
try uninstall/unable the third party extension

After turning on, it takes much longer time to turn on. all the functions don't work.have to wait a long time

After I turn on my macbook, it takes a much longer time to turn on. I can move around the arrow, but nothing works. I tried to click every app, no response. I have to wait a long time and then everything works. Did I do something wrong?
Thanks

Start Firefox in <u>[[Safe Mode]]</u> to check if one of the extensions is causing the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > Appearance/Themes).
*Don't make any changes on the Safe mode start window.
*https://support.mozilla.com/kb/Safe+Mode
*https://support.mozilla.com/kb/Troubleshooting+extensions+and+themes

Why does secure empty the trash take so long to perform?

When I empty the 'secure trash' folder, it takes hours to perform what use to take seconds or minutes to do.

Try deleting less at one time.
Unless you're trying to get rid of malware/dodgy software, there's not really much point in using 'secure empty trash' if what you're worried about is someone recovering your deleted files. Experts can still recover stuff even after that.
The only way to get rid of your data securely is to overwrite the entire disk several times with zeros (Disk Utility has a function for this, and it will take a long time.).
And if its really confidential, put the disk in an incinerator or a blender , the only 100% surefire method.

The website takes a long time to lod and it does not display correctly the layout is expanded.

When i try to load the website it takes a long time to load and when it does the layout is expanded and no images appear. The site has the same problems with IE and chrome. I did recently use Reginout.

Can you attach a screenshot?
*http://en.wikipedia.org/wiki/Screenshot
*https://support.mozilla.org/kb/how-do-i-create-screenshot-my-problem
Use a compressed image type like PNG or JPG to save the screenshot.
Did you check the Accessibility settings in Windows?
*http://windows.microsoft.com/en-US/Windows7/Make-the-computer-easier-to-see-optimize-visual-display
*http://windows.microsoft.com/en-US/windows7/Getting-the-best-display-on-your-monitor

Retrieving free/busy information from the server takes very long time

Hello, we are running Outlook 2010 32-bit in Windows 7 64.bit, and have encountered a strange problem, whenever we want to book
a resource (i.e. conference room) from Scheduling assistant, it takes very long time, sometimes even more than a minute to see the utilization of the room, it being stuck at "Updating schedule information. Retrieving free/busy information from the server"
The interesting thing is that most newly deployed PCs exhibits this same behavior, while older machines with basically the same setup gets the availability information almost immediately.
It is unclear whether this is a server setting or desktop issue, as all new Windows 7/Outlook machines that are deployed from the WDS-server exhibits the same slow behavior.
Please advise any troubleshooting steps to investigate the very slow retrieval lookup of free/busy information from the Exchange server.

Hi,
Does this issue occur on OWA?
If no, it means the issue is mainly related to the Outlook client.
Regards,
Simon Wu
TechNet Community Support

On my desktop at home the messages take a long time to enter. On laptop and other PC I don't have this problem.

Email messages take a long time to enter on my home PC (this is the pc I use for appr. 4-5 years now to read Thunderbird email.
On other thunderbird installed machines I don't have this problem, the mail enters quickly. Also when I connect at home (Wifi) with my laptop the email comes in quickly. So it is the thunderbird I am usiong on my desktop that has the problem.

''Matt [[#answer-670744|said]]''
<blockquote>
Thunderbird or your anti virus or your network card.
My money would be on the anti virus. What do you use?
</blockquote>
I am using Norton on laptop as well as desktop PC.
Desktop is 4-5 years old, might be the network card by now. Can I check ?

Why ipad 2 / iphone 3g resetting takes too long?

Im trying to reset and delete all content of my ipad and iphone 3g by choosing the selections about resetting on the general. Why it takes too long to reset my ipad / iphone 3g? It is almost 2 days my ipad are on the apple logo / looping circle appears on it and still im waiting for my ipad / iphone 3g to return to main screen. What will i do? Thanks...

There is no other way except to restore the iPad - plain and simple. You have to restore the device within iTunes. You want to use the same computer that you always sync with so that you can restore your app data and settings. You can restore with any other computer, but you will lose everything on the iPad.
You will need to use recovery mode
iPad: Unable to update or restore

HT2506 every time i open an image or PDF file using preview the mac take a long time to load and opens every single file the usually opens with PDF at the same time after a noticeable delay i would like to know why and i would like to know how i can avoid

every time i try to oppen a file like an image or a PDF it oppens by default using oreview built in appliction
occasionally this is accompanied by a long delay after wich the preview oppens every file in the downloads folder and i can navigate through them with ease
i would like to know why the application has this elay i really want to avoid it
because every tome i want to oppen an image there is a risk it would take a minnute or two

In the finder right click on the iPhoto library and show package contents, find the folder named import (or importing) and drag it to the desk top. Do NOT make any other changes of any sort. Launch iPhoto and you will Be fine. Open the import(ing) folder and if there are any photos in it you need import them to iPhoto then trash the imoort(ing) folder.
LN

Why does my signal drops and takes a long time to search and connect when I turn on or off my cellular data? And normal text messages are not getting delivered properly. It shows sent but later it will show try again, Is it just me?

I do not know what the problem is, but after the latest update it is really hard to send text messages. It is taking alot of time to send the messages, it is not the problem with the carrier because sending text messages with the same number in the same area is really easy on my normal nokia 1100. Please suggest me what I should check. Second problem I am facing is the carrier signal drops to nothing when I turn on the cellular data. It has to then search for the network and connect again the same happens when I turn the data off again. Please tell a solution. I do not think it is the problem with the hardware because the phone is hardly 2weeks old and everything was working properly with ios 6. It initaly had problem with the battery on updating to ios7 but that was rectified with the new update but again these are the new issues am facing.

This may sound stupid, but I'm gonna throw it out there anyway. Is it possible, that if I have enough junk on my desktop it might disrupt the signal? It seems odd, but it kind of looks like my signal is strong and relatively steady now that I've cleaned my desktop. I do tend to get very cluttered. I use a lot of reference images and save text clippings to use later... it just piles up very quickly.
So, I wonder if all that extra effort my system has to do keeping up with the junk might have something to do with the drop outs?

After recovering from a network outage firefox5 takes much longer time to be able to connect to web pages ( vs chrome).

system is running windows 7, ATT DSL .

Maybe try this, i am not sure that it will resolve the problem, but it is worth trying anyways.
http://social.technet.microsoft.com/Forums/en-US/w7itpronetworking/thread/eef49e64-157c-4082-8e80-52e48309691f
Hi All,
I've seen this problem multiple times, especially with Windows 7 64-bit versions and Enterprise edition. The source of the problem appears to be the Bonjour service that is installed in the background and set to "Automatic" when installing certain 3rd
party applications. Apple applications like iTunes and Adobe applications like Acrobat Professional and Creative Suites have been known to cause this problem. I've also seen virtualization software like VMWare and VirtualBox cause similar issues
with network adapters.
The solution in most of the cases I've come across has been to stop and disable the Bonjour service. The Bonjour service also masquerades as a service with a name of the format "##Id_String1.6844F930_blahblahblah". Here's how to disable this service
in Windows 7:
Right-Click on Computer > Select 'Manage'
Expand the 'Services and Applications' section in the bottom of the Left-Nav dialog and Select 'Services'
Sort the Services list by name and look for either "Bonjour" or the "##Id_String..." name mentioned above
Right-Click on the service and select 'Properties'
Click the 'Stop' button to stop the service
Select 'Disabled' from the 'Startup type' drop down list
Click 'Apply' and then 'OK'
Reboot your machine and see if the "Multiple Networks" issue is resolved. If so, you should have internet connectivity again.
Hope this helps.
cheers,
Aaron

Downloaded 4.0 and having problems.webpages take a long time to open & when opened, I get a "firefox is not responding" message.yahoo email is not loading.Is there a problem with firefox 4? is the problem going to be fixed?

firefox problems after installing version 4.0

Hi Hussein,
Thanks for your prompt reply and my apologies for the substantial delay in mine.
We did some trouble shooting since then.
We repolved the problem by choosing a pdf format instead of the seeded RTF format. This opened up the output in a couple of minutes because the pdf formatted output was about 50mb vs the RTF output which was 300MB+.
But the ORIGINAL problem still remains. The xml tagged .out file is still huge with a size of nearly 1gb!
My earlier questions here now boil down to the following questions.
Q1. Is the huge XML Publisher's .out file expected in R12? It really is massive! The text file from 11i was just 19MB
Q2. Oracle does not seem to offer the option to format the output in plain text ...We see PDF, RTF but no plain ugly text. I would expect plain text file to be much smaller. How can we get the output in plain text?
1.Yes our stats are upto date. Let me emphasize that we do not have a performance problem with the report itself. The issue we are having is opening up the output.
2. The authentication error is resolved. It was because of formatting the reports incorrectly.
3. We did not use the usual tuning procedures such as tkprof because we do not have a performance problem.
4. We checked the OPP file and there are none. I reiterate, The report does complete without issues. It is just that the output takes a long time to open up in the RTF
I will appreciate if others can share any experiences if you have faced this situation and how you have handled it.
Thanks in advance for your time!

AP Trial Balance - File is massive and takes a long time to open up

Hello,
We are upgrading from 11.5.10 to 12.1.3 and are running into some serioud problems with the Accounts Payables Trial Balance report in Detail Mode.
1. The Report takes upwards of 10 minutes to open up - and in many cases does not.
2. On further research we see that the report output file is > 500MB whereas comparable 11i Trial Balance files are only 19MB.
3. We tried running in various formats Text, PDF, HTML with no luck.
4. In fact HTML and Text formats gave “Authentication failed” errors when we tried to open the report.
My questions are:
1. Why is there a such a large increase in file size? Is this expected going to R12?
2. Is there a way to speed up the opening of the large files or create smaller files? - (summary mode, and smaller date ranges are not options as per business needs). Even a 2 month date range give the same problems.
3. We noticed that the XLA_TRIAL_BALANCES table has 36,521,125 records...LARGE.
4. We compared the ap_liability_balance records between 11i and R12. We have 29,171,382 in 11i and 37,769,034 in R12. But this is expected as we purge regularly in 11i production and I don't think this difference (about 30%) in the size of the tables should cause such a large difference in the size of the report files (nearly 2000%!!!).
5. Why are we getting Authentication failed errors? Just for these reports?
Of course we opened an SR, but you know how SRs go :-) and this is a time critical project with our deadlines nearing.
Any help or pointers from the experts here is greatly appreciated.
Thanks
Edited by: user11992646 on Jan 27, 2012 2:12 AM

Hi Hussein,
Thanks for your prompt reply and my apologies for the substantial delay in mine.
We did some trouble shooting since then.
We repolved the problem by choosing a pdf format instead of the seeded RTF format. This opened up the output in a couple of minutes because the pdf formatted output was about 50mb vs the RTF output which was 300MB+.
But the ORIGINAL problem still remains. The xml tagged .out file is still huge with a size of nearly 1gb!
My earlier questions here now boil down to the following questions.
Q1. Is the huge XML Publisher's .out file expected in R12? It really is massive! The text file from 11i was just 19MB
Q2. Oracle does not seem to offer the option to format the output in plain text ...We see PDF, RTF but no plain ugly text. I would expect plain text file to be much smaller. How can we get the output in plain text?
1.Yes our stats are upto date. Let me emphasize that we do not have a performance problem with the report itself. The issue we are having is opening up the output.
2. The authentication error is resolved. It was because of formatting the reports incorrectly.
3. We did not use the usual tuning procedures such as tkprof because we do not have a performance problem.
4. We checked the OPP file and there are none. I reiterate, The report does complete without issues. It is just that the output takes a long time to open up in the RTF
I will appreciate if others can share any experiences if you have faced this situation and how you have handled it.
Thanks in advance for your time!

Why iPad upgraded IOS7 the charging take much longer time?

Similar Messages

Maybe you are looking for