Why iphone 5 has loose buttons (volume, power and silen) ?

Why iphone 5 has loose buttons (volume, power and silen) ?

Try having a Genius take a look at the iPhone.
If you don't have an Apple retail store near you or you believe there is a problem, you can setup service for the iPhone.

Similar Messages

  • My iphone 4 lock button stopped working and now it won't charge

    Hi.
    A couple of weeks ago my iphone 4's lock button randomly stopped working, I had never dropped my iphone so I couldn't figure out why this had occurred. I did not see this as a big problem until recently when my iphone stopped charging. The iPhone had worked just as normal the day before it stopped charging. I usually charge my iphone over night, but one night it reached around 85% and stopped charging. I have tried it with several different iphone chargers and different plugs in the house but still the iPhone wouldn't charge. Now my iphone has ran out of battery and due to the fact that my lock button is broken, I can't try anything to turn it on. Does my battery need replacing?
    Thanks,
    Anna.

    Try these steps: http://support.apple.com/kb/ts3281

  • HT1414 My iPhone has crashed during a sync and now I can't restore from backup as it is asking for password to load the backup yet neither the lock code for the phone or my iTunes Password are working... I have no other password to all upon and need the r

    My iPhone has crashed during a sync and now I can't restore from backup as it is asking for password to load the backup yet neither the lock code for the phone or my iTunes Password are working... I have no other password to call upon and need the restore to retrieve info onto my phone, I am a real novice to this...... please help, !!!!

    If anyone else is looking for a solution to this same problem, I was able to get it working looking through several older discussions.
    The solution was to use the password that I had on my iTunes account the very first time I set up the iPhone about a year ago.  I changed my iTunes password about 10 months ago;  but apparently, the backups continue to use the password that existed when the phone was first set up.
    A couple of troubling things with this are that 1) I didn't apply a password when I did the backup this afternoon so I don't understand why it was required when I did the restore a few hours later. and 2) it makes zero sense why iTunes would not be smart enough to use the current accout password when requiring the password to restore from a backup made with no password. 
    I thought iTunes and Apple were smarter than that.  With so many posts stating exactly the same problem, it is clear that this is bug in the software. 
    Best,
    Craig

  • Why did i loose all my apps and music from my phone when i updated it?

    WHY did i loose all my apps and music from my phonewhen i updated it?

    Without knowing all of the information we can only guess  .... And my guess would be that you did not have the apps selected to sync from iTunes on your computer. If the apps are in iTunes on you computer, select them to sync  and sync again.
    Connect the iPad and sync again - if you auto sync. Then after the iPad syncs the first time - leave it connected to the computer and select the iPad from the left sidebar under the devices heading. Click on the Apps Tab in iTunes. Select each app (click on the boxes next to the names), then click on the Apply button in the lower right corner of iTunes. Make sure that the Sync Apps heading is checked as well.
    If the apps are not in your iTunes library - if you had never transferred the purchases - you will have to download them again via the purchased tab in the App Store on your iPad. Make sure that you use the same ID to redownload the apps that you used to buy them with.

  • Hey, constantly since I installed the iOS 7.1 upgrade, my iPhone has been constantly shutting down and I think it's really frustrating and I whant to know how I can stop my iPhone from shutting down so I can downgrade to iOS 7.0.4?

    Hey, constantly since I installed the iOS 7.1 upgrade, my iPhone has been constantly shutting down and I think it's really frustrating and I whant to know how I can stop my iPhone from shutting down so I can downgrade to iOS 7.0.4?

    7.1.1 is certainly compatible with the iPhone 4. Just try a reset first.
    Close all open apps by double-tapping the home button, then swiping up and off the screen with the app window (not the smaller icon).
    Reset your device: hold down the home button along with the sleep/wake button until the screen goes black and you see the Apple, then let go. (No data loss)

  • HT1937 My iPhone has 34%of the power,but when I take photoes it will power off by itself!

    My iPhone has 34%of the power,but when I take photoes it will power off by itself!

    First, update iTunes, then connect the phone to the computer and do a restore. This will also get your iOS up to date. Your phone should operate correctly after doing this, if not, you will most likely need to have the phone serviced or replaced.

  • I need to back up and sync multiple iPhones to a single iMac.  Each iPhone has a separate Apple ID and the data from each iPhone needs to be backed up separately from the others.  How can I do this without getting all of the contacts, etc. mixed? Tnx

    I need to back up and sync multiple iPhones to a single iMac.  Each iPhone has a separate Apple ID and the data from each iPhone needs to be backed up separately from the others.  How can I do this without getting all of the contacts, etc. mixed? Tnx

    This might help: http://support.apple.com/kb/HT1495.

  • My Iphone 4s wifi button is grey and won't turn on.

    Hi, My Iphone 4s wifi button is grey and won't turn on.  I have reset the network settings in settings, rebooted it and taken it back to factory settings. Any help or advice would be welcome

    You should get it looked at by visiting an Authorized Apple Service Provider or an Apple Store next to your place, this might be a hardware issue.
    iPhone - Contact Support - Apple Support

  • HT3500 I upgraded my operating system to Snow Leopard 10.6.8 and now my Lexmark X4875 will not print wirelessly and neither Apple, Lexmark or Belkin can work out why. Has anyone else experienced this and knows what to do? Thanks

    I upgraded my operating system to Snow Leopard 10.6.8 and now my Lexmark X4875 will not print wirelessly and neither Apple, Lexmark or Belkin can work out why. Has anyone else experienced this and knows what to do? Thanks

    You launched iPhoto and from its Preferences you selected Connecting camera opens.....

  • My Iphone Has a Restart Problem Again and Again wot To do?

    MY Iphone Has a restart problem again and again wot to do please tell me

    Basics from the user guide are restart, reset, restore from backup, restore as new.  If you go through ALL of those steps and you still have issues, you need to get your phone checked out by Apple.

  • My iPhone 4 is chewing through power and data, is there any way to find out if an app is causing this?

    My iPhone 4 is chewing through power and data, is there any way to find out if an app is causing this?

    call them, tell them you NEED a new battery installed, and they need to tell you when they can do it.  That is their job to help you! Give pushback if necessary.

  • I recently tried to update my iphone software via itunes but got an error and my iphone has gone to recovery mode and now it doesn't connects to my itunes. i tried everything but can't connect and apple mobile device(recovery mode) driver

    I recently tried to update my iphone software via itunes but got an error and my iphone has gone to recovery mode and now it doesn't connects to my itunes. i tried everything but can't connect and apple mobile device(recovery mode) driver is not installed. Where can i get apple mobile device(recovery mode) driver software? please help

    http://support.apple.com/kb/TS3694#error1

  • HT201272 The screen on my iphone has suddenly become very sensitive and mutes all the time?

    The screen on my iphone has suddenly become very sensitive and mutes ny calls all the time I know there was a bug fix but don't know how to find it?

    If your screen is flickering, you might have a hardware issue there. I would take Macie to the doctor and have her checked out.
    17" 2.2GHz i7 Quad-Core MacBook Pro  8G RAM  750G HD + OCZ Vertex 3 SSD Boot HD 
    Got problems with your Apple iDevice-like iPhone, iPad or iPod touch? Try Troubleshooting 101

  • My ipod touch wont turn on!! i have tried EVERYTHING!!! rebooting , trying to put it in DFU mode , pressing volume , power and home buttons , charging it but nothing works!it doesn't show up in itunes. my warranty is expired. what to do please help!

    MY ipod touch 5 wont turn on. i tried holding the power and home button together to reboot but didnt work. i tried pressing only the home or power button but no response . it doesn't show up in itunes. i tried keeping i in charge but it doent even show the charging icon! it does not show the no battery icon either. i tried leaving it with no disturbance for a few hours but still no luck . it has no response . My 1 year warranty is already expired. is my ipod officially and completely DEAD????

    See if you missed anything here
    Try:                                               
    - iOS: Not responding or does not turn on           
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - Try another cable                     
    - Try on another computer                                                       
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order. The appointment is free. No warranty required
      Apple Retail Store - Genius Bar                              

  • My iPhone 4 lock button is stuck and Ive had my phone for over a year. What do I do.

    My iPhone 4 lock/home button is stuck and I'm out of warranty. How much will it cost to fix the button cause I have no other problems. Or will they cover it because people were saying it's a defect?

    I was able to pay someone to replace the button completely for much less than what Apple wanted.
    Here's a link to the place I had it done:
          http://www.yelp.com/biz/fix-my-phone-sf-san-francisco
    I can understand why Apple has a 1 year warranty, but I believe a busted power button constitutes a design flaw and thus is defective (much like the iBook logic board from 2003 we had to sue them over).
    ( http://www.apple.com/au/support/ibook/faq/ )
    If Apple wasnt the biggest and most profitable company in the world, and instead the nice little apple I used to know, I'd have more sympathy.
    -Matt Bouchard
    San francisco

Maybe you are looking for

  • Smartform language problem

    Hi, I developed one smartform with EN language and i have written the drive program also. But when im configuring  form name to program name in Nace t.code  it is showing like " Smartform En langu is not available". Please help me out in this issue.

  • OEM - Data Guard Menu is not visible

    Hello guys, at the moment i am trying to install and configure Oracle Dataguard in our test environment. Because of some easy managing of Data Guard i want to use the OEM Data Guard interface in the OEM. So i configured my local OEM on my test databa

  • Why does Mail gets truncated for no apparent reason?

    I composed an email in Word (on my MacBook Pro) then copied pasted it into an email  (ro avoid  using attachments) Something caused the message to be truncated about one third of the way through This happeed again when resent to the saame addressee I

  • Localhost - Analysis Services Question

    Hi folks, I have a SQL Server named instance called (mymachine)\Tuesday that was installed with SQL Server Developer so I could run Analysis Services.   My original installation was done in SQL Express.   When I try to deploy a Analysis Services Proj

  • DM 6.1.0.36 not updating to 6.1.0.B38

    I don't get it.  I was in DM version 6.1.0.36 and while speaking to a tech agent yesterday, he walked me through looking for an update and sure enough, there was a version 6.1.0.B38 which offered more controls/options.  Today I had an issue with some