Why iPhoto is not avable for iPad 1, I don't need a camera to edit my photos.

Why I can't use iPhoto on my iPad 1? I don't need a camera.

iPhoto CAN be installed on an iPod Touch 4G and also an iPad 1, just use the iPhone Configuration Utility download:
http://support.apple.com/kb/DL1465 (OSX)
http://support.apple.com/kb/DL1466 (Windows)
Just add the Application (after downloading in iTunes) to the program, connect your iPod/iPad and click "Install".
However: You can't sync apps with iTunes after doing this (it will remove iPhoto)
It will work perfectly on both iPad and iPod Touch

Similar Messages

  • HT3574 do you know why hotspot is not available for ipad 2

    ı can not do hotspot for ipad 2, how can ı enable it.

    Apple chose to not make it a feature of the 2nd generation iPad.
    There is no method that can be discussed here to change that.

  • Why can I not hear my iPad 2 "click"off when I close cover

    Why can I not hear my iPad 2 "click"off when I close cover

    Hi you are not going to believe this but under "ringer and alerts" I decided to increase the level of sound (was set half way) once I did that it was like it "released" it!!  The cover now clicks off even when I returned setting back to original place.
    Thanks so much for your hep.

  • HT1212 why will itunes not detect my ipad

    why will iTunes not detect my iPad

    - try another cable
    - try another usb port
    - make sure iTunes is up to date
    For further troubleshooting steps follow the article below based on your computers operating system:
    iOS: Device not recognized in iTunes for Windows
    iOS: Device not recognized in iTunes for OS X

  • Why can I not update my iPad first generation to the latest software?

    Why can I not update my iPad first generation to the latest software?

    Which version of iOS is supported is a decision made by each
    individual software developer. If there is an app that is not available
    in iOS 5, contact the developer to see if they can provide a version
    compatible with your iOS.
    Perhaps one of these links may help:
    iOSSearch - search the iTunes store for compatible apps.
    Vintapps 3.1.3 - paid app.
    Apple Club - filter apps by iOS version.

  • I have an older iMac 5,1 and the disc drive no longer works. I was hoping that I could the Apple USB super drive as a replacement, but the info on the super drive page says compatible with iMac 2012 or later. Does anyone know why it would not work for me?

    I have an older iMac 5,1 and the disc drive no longer works. I was hoping that I could the Apple USB super drive as a replacement, but the info on the super drive page says compatible with iMac 2012 or later. Does anyone know why it would not work for me?

    A reply to similar question (Q & As , in product page Apple Store) says:
    "...dissable the internal reader hardware from devices setup. Then plug the external usb superdrive and that's it."  Answered by Enrique T from Lima Oct  25 2013.
    If you can locate an external Apple USB 'Air" superdrive for earlier model MacBook Air, that should work. The newer one for the Air is the same as for iMac, now.
    You may be able to use other brands of external USB optical drive with your older intel-based iMac, as some of them function capably. A few should also be able to see system discs or other bootable utilities on DVD.
    Hopefully this helps.
    Good luck & happy computing!

  • Why SLFM is not enabled for Macbook 13" Aluminum late 2008 model?

    Hi All,
    Does anyone know why SLFM is not enabled for Macbook 13" Aluminum late 2008 model?
    I just found this out after I installed bootcamp and Windows 7 on my Macbook 13" with P8600 2.4Ghz CPU 2GB RAM and 250G HDD after more than a year of using it.
    After I installed the CPU monitoring widget on Windows 7 and CPUZ, I noticed that the lowest Freq that my Macbook operates even with <5% CPU load is only 1.5Ghz and VID @1.0V.
    I installed Coolbook on OSX to confirm what I saw on Windows. I was surprised that SLFM is not visible in Coolbook which is the same result I got from Windows 7 CPU monitoring widget and CPUZ.
    I checked with our local Mac support and they got the same results for all of Macbook 13" Aluminums late 2008 model. SLFM is not visible on Coolbook which means, it is not enabled.
    I tried to install Coolbook on my wife's Macbook Pro 13" 2010, which has the same spec, P8600 2.4Ghz CPU and 250G HDD. The only difference is the memory which is 4GB RAM. There, SLFM is enabled and works just fine, running at 798Mhz @0.875V.
    Can anyone please help confirm if this is really the case for Macbook 13" late 2008 model?
    Because I checked the Intel P8600 Datasheet and SLFM should always be enabled. Otherwise, it will affect battery life as well as long term reliability of the CPU.
    I would appreciate if the Macbook and Macbook Pro owners in this forum can help confirm using Coolbook the status of SLFM in your own Macbooks. You may use any other tool in checking the SLFM and share it with us if you believe it is more reliable and better than Coolbook. Thanks.
    Message was edited by: jespada

    BTW, Here is what I got from Coolbook for comparison. As you can see the late 2008 Macbook has no SLFM info.
    Legend:
    SLFM - Super Low Freq Mode
    LFM - Low Freq Mode
    HFM GV - High Freq Mode (Geyserville/Speedstep)
    HFM - High Freq Mode
    Macbook 13" Aluminum late 2008 P8600 2.4Ghz 2GB RAM 250GB HDD
    Freq VID
    SLFM -- --
    LFM 1596Mhz 1.0000V
    HFM GV2 1862Mhz 1.0500V
    HFM GV1 2128Mhz 1.1000V
    HFM 2394Mhz 1.1375V
    Macbook Pro 13" Aluminum 2010 P8600 2.4Ghz 4GB RAM 250GB HDD
    Freq VID
    SLFM 798Mhz 0.8750V
    LFM 1596Mhz 1.0000V
    HFM GV2 1862Mhz 1.0500V
    HFM GV1 2128Mhz 1.1000V
    HFM 2394Mhz 1.1375V
    Message was edited by: jespada
    Message was edited by: jespada

  • Why does 'User not registered for online use' show up when I try to import a cd into itunes. None of the cd info shows up either

    Why does 'User not registered for online use' show up when I try to import a cd into itunes? None of the cd info shows up either.

    Well, the format I upload from the camera is "video clip" or "video for Windows"...sometimes I've converted them to avi format, too. But as I said, it never even lets me get that far...I never get to even select a clip. As soon as I tell the program to "import/clip" it freezes up before I can even go to the folder that the clips are in. It has only begun to do this recently, and I'd never had any problems like this before. Last night I tried it again, and I clicked "open composition", and it froze when I did that too.
    I'm not sure how much more specific I can be about the details of the clips, since I'm positive it has nothing to do with the clips themselves...I'm running Windows XP, though...Home Edition Service Pack 2, Pentium 4 CPU 2.80GHz, with 504 MB of RAM. I have had the automatic updates turned on since I did my last reformat a couple of weeks ago. Could it have something to do with some kind of an update it may have done?

  • Why skype is not available for NOKIA ASHA 311

    Why skype is not available for nokia asha 311? I had searched many sites and even in skype official site but cant download!!!! Not available even in NOKIA STORE. HOW TO DOWNLOAD SKYPE FOR NOKIA ASHA 311?
    Solved!
    Go to Solution.

    palani6 wrote:
    Why skype is not available for nokia asha 311? I had searched many sites and even in skype official site but cant download!!!! Not available even in NOKIA STORE. HOW TO DOWNLOAD SKYPE FOR NOKIA ASHA 311?
    Skype has not published a native version of its messaging application for Nokia Series 40 devices. Therefore, it is not possible as of this moment.

  • Why filters are not awailable for my objects?

    Why filters are not awailable for my objects?

    Based on your screenshot preview, I can see that from your Elements panel, you are using an external .html file, correct?
    Some in-app Properties are not available for external, non-managed files.
    If you create a new project (File > New), for example, add an element you will have full access to Edge Animate properties.
    If you create a htm5 doc in Dreamweaver, for example, and open that in Edge Animate then you are limited - because the originating file (.html) is from another application.
    Hope this helps, clarify.
    Darrell

  • Why sports tracker not available for N97

    Why sports tracker not available for N97? One of the most expensive nokia phones without sports tracker. Its weird.. nokia whats happening, dont disappoint N97 customers

    A quick google or a look in Betalabs will tell you that Nokia diverged Sports tracker last year so it is no longer "Nokia" http://runningdigital.com/2009/10/21/nokia-sports-​tracker-update-sports-tracking-technologies/
    Nothing on their site yet http://www.sportstrackingtechnologies.com/, but presumably something will pop up on Ovi Store in the future.

  • Why pages is not free for me

    why pages is not free for me, i´m just update to maveriks but i can´t download pages, keynote or numbers for free, why?

    The update is available for those using iWork '09. If you have never previously purchased iWork ’09 and have not bought a new Mac since October 1, you will have to purchase the applications. There are several reasons why the updates don't show as free for those who already have iWork '09 installed.
    1. You must have iWork '09 apps installed & they must be updated to the x.3 version. You can also download the standalone updater from this page.
    2. If you are not using English as the primary language for your Mac, change to English & run Software Update. You can then switch back to your preferred language.
    3. Go to Mac App Store (MAS) > Click on Store > Check for Unfinished Downloads. You will need to individually click into each application > Click update > enter in your Apple ID & password and then it will start updating.
    4. Open App Store on your Mac & look at the buttons under Keynote, Pages & Numbers. If it does not say “Update” click Account under Quick Links, enter your password & click “View Account.”  Next, click the “Reset” button to the right of “Reset all warnings for buying and downloading” at the bottom of this page, & click Done. Check your updates tab & iWork & iLife updates should now appear.
    These are the ones I've seen work for others.

  • Why is Cfgrid not working for me

    I am using CFMX7
    Why is this not working for me?
    This is Gridtest1.cfm
    <cfoutput>
    <CFFORM align="center" ACTION="gridtest2.cfm"
    METHOD="POST"
    name="getstuff" >
    <cfinput type="HIDDEN" name="ID" value="#form.id#" >
    <cfinput type="HIDDEN" name="customerno"
    value="#form.customerno#"
    >
    <cfgrid name="Mygrid" width="960" query="getpermits"
    gridlines =
    "yes" rowheaders="yes"
    selectmode = "edit" height="350" >
    <cfgridcolumn name="id" bgcolor="##FFFFFF" header="ID"
    display="yes" WIDTH="40" select="no">
    <cfgridcolumn name="permitno" bgcolor="##FFFFFF"
    header="Permit
    No" display="yes" width="70" select="yes">
    <cfgridcolumn name="sortorder" bgcolor="##FFFFFF"
    header="SortOrder" display="yes" WIDTH="62" select="yes">
    </cfgrid>
    <div align="center">
    <cfINPUT TYPE="submit" VALUE="Save My Changes"
    NAME="savemychanges"
    >
    </div>
    </cfform>
    </cfoutput>
    This is GridTest2.cfm
    Form fields:
    <cfoutput>[#form.fieldnames#]</cfoutput>
    Form values:
    <cfloop list="#form.fieldnames#"
    index="idx"><cfoutput>#idx# =
    #Evaluate(idx)#</cfoutput>
    </cfloop>
    <cfif isdefined ("form.savemychanges")>
    <cfgridupdate grid="mygrid" datasource = "divwt"
    tablename =
    "tankerpermits" keyonly="yes" >
    </cfif>
    <cfoutput>
    form.#__CFGRID__GETSTUFF__MYGRID#.original.#permitno#
    </cfoutput>
    Output from TestGrid2.cfm reflects a �funny
    looking� grid name and I
    can see in the output that Permitno is definitely a defined
    field.
    Form fields:
    [ID,CUSTOMERNO,SAVEMYCHANGES,__CFGRID__GETSTUFF__MYGRID]
    Form values:
    ID = 13
    CUSTOMERNO = 21691
    SAVEMYCHANGES = Save My Changes
    __CFGRID__GETSTUFF__MYGRID = __CFGRID__EDIT__=3 id N Permitno
    Y
    sortorder Y 1 U 571 z
    Element __CFGRID__GETSTUFF__MYGRID.ORIGINAL.PERMITNO is
    undefined in
    FORM.
    The error occurred in
    C:\cmudintranet\Purple\divwt\bftankertruck\gridtest2.cfm:
    line 147
    #form.__CFGRID__GETSTUFF__MYGRID.original.permitno#
    Thanks in Advance

    Lorna, be careful. This could cause your comments
    to stop working. Blog comments are
    sensitive..................
    .......... Lorna says ................................................
    Allyson, your precaution comes on the heels of me realizing that if I put a song on a blog summary page, then I will have to edit the .js file every time I add a blog entry.
    Whereas MassReplaceIt could solve the problem there, the added issue of problems with comments is enough to make me stay away, so that is what I will do: No music within 250' of the blog guy.
    Lorna in Southern California

  • With my Mac Book,can I Enter in my own ICal repetitions. Like all 3,4,5,6,7,8,9,10,11,12 weeks. Why is that not in the IPad?? Kind regards Sylvia

    With my Mac Book,can I Enter in my own ICal repetitions. Like all 3,4,5,6,7,8,9,10,11,12 weeks. Why is that not in the IPad?? Kind regards Sylvia

    We're just users like yourself, so we can't answer your question.  It's just how Apple designed the calendar on iPad.  There are calendar apps with more flexibility in the App Store.  You might want to explore those options.

  • Why iPhoto is not available after OS X recovery?

    I have Mac OSX Mountain Lion installed in my brand new MacBook Pro (mid 2012) and it comes with iPhoto. After I recover my system using Recovery from Internet, iPhoto is not available.
    What can I do to get it back without paying 14.99 in Mac App Store?

    I follow the instructions, however, iPhoto is not available for download

Maybe you are looking for