Why iPod has 1 year expiration on sleep button?

My iPod touch's sleep button died just a few weeks after a year.  My iPhone's sleep button died a few weeks after
a year.  My son's iPod Nano's sleep button also died a few weeks after a year.
It seems Apple has the expiration date on their products.  Wonder if they took this issue seriously.
It happens in their three different products.  So there must be a fundamental flaw in their design.
As a consumer, I got screwed.

Here is a relevant thread to this problem.
https://discussions.apple.com/message/22406671#22406671
My 2nd 6th gen iPod nano has just bricked, with both the 'volume down' and the 'sleep/wake' button unresponsive. I haven't used it excessively, probably 4 hours a week for the last year.
Very dissappointed.

Similar Messages

  • I opened my iPod nano 6g to fix the sleep button and now when i connect i get an error message, PLEASE help!!

    earlier i was bored and decided to open my iPod Nano 6th Generation to see if i could fix the broken sleep button, i think when i was removing the battery i might have beat it up a little, and idk if i did anything wrong to the logic board, now when i connect it it says, "USB Device Not Recognized, One of the USB devices attached to this computer has malfunctioned and Windows does not recognize it" and it gets hot when i charge it and the music doesnt play even if i use the headphones with controls on them, it was working fine earlier:(

    They are pretty much designed to fail after about a year so you will have to buy a replacement.  I would suggest an earlier model or to take your business elsewhere.  I have gone through my fourth and final ipod nano 6th generation.

  • Ipod has been disabled but the home button is broken is there another way of rebooting?

    My kids  iPod Touch has been disabled, have tried to do a recovery as the code as been forgotten, but the home button is broken is there other options?

    I know of no such way. RecBoot will place an iPod in recvery mode without using the butttons but I know of no similar program for DFU mode.

  • My ipod has completly knackered it's self and the touch screeen has completely packed in, wont work on the computer when i plug it in also i cannot switch it off or on standby. What should i do?

    Well lately my ipod has just started playing up basicly the touch facility has started to not work it will not let me turn it of or on standby aswell when i plug it in to my computer so i can factory reset incase it has a virus on it but it does not show on the screen also i tried drayning the battery and then recharging in hope it will work but no it still does not work. I am really stuck and I need my ipod as soon as possible please help

    hard reset the ipod. IN THIS ORDER. plug in the ipod, turn the ipod off, open itunes, press the sleep button (top) for 3 seconds, continue to press the sleep button and also (at the same time) press the home button. Contunue to do this until 3 seconds after the screen flashes. Then release the sleep button and continue to press the home button until the ipod shows up in itunes. do a factory reset.

  • My iPod is locked for years and the home button is pushed in and doesn't work how do I reset it?

    So my sister locked my iPod for 44 years and the home button is broken and pushed in and doesn't work how am i supposed to reset it now?

    If you can't remember your passcode, you'll have to restore it to remove the passcode, as explained here: http://support.apple.com/kb/HT1212.
    If you're running iOS 7 with Fid My iPod enabled, in order to restore it you'll have to force it into recovery mode as explained here: http://support.apple.com/kb/ht1808, or erased it using Find My iPhone on icloud.com if your home button isn't working (see http://help.apple.com/icloud/#/mmfc0ef36f).

  • My sleep button isn't working correctly, what do I do?

    I have a 6th generation ipod. If I press the sleep button to turn of the screen and save battery, the music stops as well. I tried to reset the settings and it worked for a while, but just went back to not playing. the only way I can listen to music is if I leave the screen on (really annoying for sleeping). Any suggestions?

    Make sure your headphones are plugged ALL the way in, meaning you cannot see any of the silver still showing from the headphone's plug.  You should hear a clicking sound when inserting the headphones indicating the headphones have been fully inserted.
    B-rock

  • I love the 6th Gen. iPod Nano but it has a major deficiency, the power button. I've bought 2 and they both have given me the same issue of the power button becoming slack and not functioning. Why is this so, and how can I fix it??

    MAJOR DEFICIENCY = WASTED MONEY:
    I love the 6th Gen. iPod Nano but it has a major deficiency, the power button. I've bought 2 and they both have given me the same issue of the power button becoming slack and not functioning. Why is this so, and how can I fix it??

    Greetings,
    I've never seen this issue, and I handle many iPads, of all versions. WiFi issues are generally local to the WiFi router - they are not all of the same quality, range, immunity to interference, etc. You have distance, building construction, and the biggie - interference.
    At home, I use Apple routers, and have no issues with any of my WiFi enabled devices, computers, mobile devices, etc - even the lowly PeeCees. I have locations where I have Juniper Networks, as well as Aruba, and a few Netgears - all of them work as they should.
    The cheaper routers, Linksys, D-Link, Seimens home units, and many other no name devices have caused issues of various kinds, and even connectivity.
    I have no idea what Starbucks uses, but I always have a good connection, and I go there nearly every morning and get some work done, as well as play.
    You could try changing channels, 2.4 to 5 Gigs, changing locations of the router. I have had to do all of these at one time or another over the many years that I have been a Network Engineer.
    Good Luck - Cheers,
    M.

  • I cannot access any songs on my iPod classic. I had around 20,000 songs on it and it now says I have 12,00o but can't access them. Any idea why this has happened?

    I cannot plug it into iTunes and reload as my MacBook crashed a few days ago and I had to get a new hard drive. Recovery software is unable to retrieve anything from the hard drive.
    All the songs were from CDs so not saved in iTunes.
    The iPod was last plugged into the MacBook one day before it crashed and it was Ok when I ejected it.
    Could it be anything to do with this? Doesn't an iPod have its own memory? Any ideas why it has happened and if their is anyway of retrieving it? Is it best to just take it into an apple shop? I am no longer covered with apple support.
    Thanks.

    When I hover over cover flow it says I have 12851 songs but when I click nothing happens.
    When I hover over artists or albums it says 'no artists/albums'.
    I can upload again from my CDs but just wondering if there is anything to do. I live abroad so all my CDs are in storage.

  • How do I find the screen with my personal iPod (my name's iPod) so I can download from my purchased or free songs/pods from my computer? My iPod has opened to that for 3 years and this week I can't find it: not on purchased page or on Apple store page.

    QUESTION from an American in India:
    How do I find the screen with my personal iPod (my name's iPod) so I can download from my purchased or free songs/pods from my computer? My iPod has opened to that for 3 years and this week I can't find it: not on purchased page or on Apple store page.

    See:
    Recovering your iTunes library from your iPod or iOS device: Apple Support Communities

  • My ipod has a one year warranty but i dont have the paper is it still valid?

    my ipod has a one year warranty but i dont have the paper is it still valid?

    Try:                                               
    - iOS: Not responding or does not turn on           
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - Try another cable              
    - Try on another computer                                                       
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order. The hotness is one indication of a hardware problem, like a bad battery
      Apple Retail Store - Genius Bar                              

  • My iPod classic, which is 6 years old is corrupted. A message that says ''Connect to iTunes to restore'' keeps on blinking on the screen, But when I connected it to iTunes it says an error has occured and my iPod has hung after i've disconnected it.

    My iPod classic, which is 6 years old is corrupted. A message that says ''Connect to iTunes to restore'' keeps on blinking on the screen, But when I connected it to iTunes it says an error has occured and my iPod has hung after i've disconnected it.

    Hi,
    Time to take your iPod in for service.
    You can make a Genius Bar reservation in advance if you are in the U.S.
    http://www.apple.com/retail/geniusbar/
    Carolyn 

  • My ipod has a black screen.  I have tried to hold the sleep/off button and menu button at the same time with no luck.   I connected to my computer and tried restore on itunes -  still with a black screen a voice said "screen locked'  code 542

    My ipod has a black screen.  I have tried to hold the sleep/off button and menu button at the same time with no luck.   I connected to my computer and tried restore on itunes -  still with a black screen a voice said "screen locked'  code 542

    Is the iPad charged?  Plug it in with the charger/wall outlet for half an hour and try again to reboot by holding both the power and home buttons until the apple logo appears.

  • Pressing sleep button has a wide variety of random effects, is my ipod broken?

    I have the relatively new iPod Nano 9th Generation, and I have had it for nearly a year. Everytime I am done selecting a song, I put my iPod to sleep by clicking the sleep button so it continues to play the song, but doesn't waste as much energy on illuminating the screen and such. I do this often, and now the button is becoming more increasingly difficult to press and less technologically responsive. When I press the sleep button now, it either pauses the song, skips the song, reads the songs title, does nothing, just funtions properly, etc. I feel it may have something to do with the jack of my headphones, because when I am not physically contacting the headphone jack (I usually use it as sort of an extender to make it easier to hold on such a small mp3 player), it normally is a little more responsive. I would attempt to use another pair of headphones, but I do not have any left, and do not wish to invest in more if this iPod is nearing its breaking point.
    So, the big question. Is my iPod broken?

    It also effects other buttons aswell, such as the increase and decrease volume. They still have the same effect as the sleep button however. All on screen buttons work just fine, it is just the physical buttons. I have recently tried different headphones and the same thing happens so it isn't the jack I don't believe, and there is no easy was to test without headphones altogether because there are no internal speakers to tell me whether it pauses, or reads the song information with siri's voice, or skips to the next song, etc..
    If you were unaware, this is the type of iPod I own. It is roughly 2 inches by 2 inches and the jack is plugged into the bottom right of the iPod while the buttons are placed on the top.
    From left to right, the buttons order is: Decrease Volume, Increase Volume, Sleep Button.

  • My ipod has been showing the past 6 hours is showing the apple logo. why?

    All my ipod has been doing for the past 6 hours is showing the apple logo on and off.I dont know what it means and it wont turn back on.My ipoid is everything to me and its too old to return for a replacement,Its always worked perfect and now this is happening.Why? Anything to do to fix it?

    I have the same problem. I have tried my sons i pod in the car and that works fine. Mine works on i pod dock in the house. But in the car I am also getting the message usb not supported

  • 5G iPod wont play after awaking from sleep

    Im not sure why but all the previous posts for this very same problem have been archived without answers. When my ipod is left to go to sleep on its own, after its woken from sleep mode it wont play - even though the default pause icon changes to the play arrow the counter never starts and no audio is heard. I must turn it off and then on again to begin playing. If I turn it off ( hold play button ) instead of ever letting it go to sleep it works perfect every time. I see many others posting for the same issue in the past - I smell Firmware Upgrade !!!
    Anyone found any other possible fix?
    Thx - Mike

    I see helpful answers as 2 and solved answers as 1, but I dont see where those answers are, however, I think your G5 has the same problem I do. For some reason it takes a LOT of smackin me around in the morning to wake me up. I've had this problem for years, and I still don't have a solution.
    Seriously, the problem will take some troubleshooting, but do you have any "other" enhancements in your system preferences or other apps loaded that might have an option to put your computer to sleep? if so, you may have a setting there that is putting your mac to sleep immediately after waking it. Also, try going to the system preferences and selecting "never" for putting the computer to sleep, then go to your "Apple" icon and manually put your mac to sleep (first option above restart) and then move your mouse or try some keys to wake it up and see if it stays awake. If the mac stays awake, then I would say this leads me to believe its your system preferences giving you the conflict.

Maybe you are looking for

  • |Funds Management - relating to PR/PO

    I am getting another error in Funds Management: Posting date must be used for update of value type 000100 update profile 50 Message no. FI_E008 Diagnosis FM areas with assignment to the update profile must have all their value types defined as 'posti

  • How do I remove a corrupt repeating event from my iPhone 3Gs?

    I thought that this would be easy as there is a solution to this problem , when it occurs in iCal, however, this corrupt repeating Calendar event  on my iPhone is not visble on my iMac/iCal. I have confirmed that Calendar is synching with iCal. can a

  • P67A-GD53 stuck in APS LED 1, No Beep and Black Screen

    Hi, I just got my full new gaming Pc, I mount all component and when I press PWR Button, fans, leds, GPU, HDD and all items switch on, but my APS led 1 stuck in LED 1, no beeps black screen, and it can stay all night on without changing... My Compone

  • Web Gallery 'Preview in browser' error

    Hi All, I am hoping someone can possibly help me out? Everytime I try and preview a web gallery in my browser I just get a word pad file open similar to what I have copy and pasted underneath. I have tried different web engines and still I get a simi

  • Airport extreme signal drops when/after using Skype

    I used Skype-to-Skype twice yesterday and both times the wifi signal from the Airport (802.11 n /square base station) started to attentuate and then completely disappeared. In both cases, I had to turn off and re-power the Airport base station to get