Why ipod random play on single trax does not work.

Have you ever wondered why when you random play your IPOD instead of getting an interesting and varied musical experience – you just get an uneven mess .
You need random play because it’s the only way to get from beginning to end with such a wide and varied collection – but it comes out a mess.
But if you have the complete album on 1 file afte2 20 minutes you are board and have probably switched off . We’ve found a solution which Kate Bush has recently endorsed on BBC radio 2 . If you want to find out more about transforming your mp3 collection please try out this link.
http://members.lycos.co.uk/steveislip/mp3-lp-side.html
I’m quite happy to answer any question from people who want to transform their album collection .

The IPOD has huge capacity - 30 to 60 gig so to give the listener a wide range of music -approx 2500 albums . This means you have a wide music choice pop, jazz, classical so the only way to play it all is to random play it but the listening experience is an uneven mess . If albums are compiled as lp-sides of approx 20 minutes any 1 hour of play gets 20 mins of a consistent musical theme then a complete change . Please check out my site for more details:
http://members.lycos.co.uk/steveislip/mp3-lp-side.html

Similar Messages

  • I have an iPod and an Ipad and want to use FaceTime calling from the iPod to the Ipad but it does not work. I use the same iCloud acount.

    I have an iPod and an Ipad and want to use FaceTime calling from the iPod to the Ipad but it does not work. I use the same iCloud accountedge

    Did you set up different email addresses for each device?
    iOS: Using FaceTime
    The Complete Guide to FaceTime: Set-up, Use, and Troubleshooting Problems

  • Linking Keynote on iPod-Touch with Keynote on MacBookPro does not work.

    I purchased Keynote 5.0.5(942) for my MacBookPro (MacOS 10.6.7), and
    KeynoteRemote 1.2 (53) for my iPod-Touch 4th generation.
    I am trying to link KeynoteRemote on the iPodTouch with Keynote on MacBook Pro.
    KeynoteRemote gives me a Passcode, which I enter in the preferences panel on Keynote for MacBookPro.
    Verification does not work. Nothing happens, and after sometime an error message appears that
    verification has failed.
    I have tried to do all combinations of setting the firewall on or off, and checked out all linkage and network settings.
    Does anybody know what the tricks are to get KeynoteRemote to work with Keynote on MacBookPro?
    Or does KeynotePro not work at all?

    thanks, David. it works now. I think the problem was the firewall. I fixed it now.

  • Why when viewing Hotmail the "Close Ad" does not work?? Unfortunately Tested OK with I.E.

    Why when viewing Hotmails for example the inbox there is a "Close Ad" clickable feature that allows the inbox to go full screen.
    If used the "Close Ad" does not work and there following error is recorded :
    support.mozilla.com : server does not support RFC 5746, see CVE-2009-3555
    I tried it with the Unfortunately Tested OK with I.E.

    Bjorn,
    Can you please tell me what versions of OC4J and JDK you're using, as well as what o/s?
    Thanks,
    -Lee

  • I cannot get my ipod to unlock, the touch screen does not work and I cant reset it

    I cannot get my ipod to unlock, the touch screen will not work and everytime i try to reset it I take a picture.  any suggestions

    Try:
    - Reset the iOS device. Nothing will be lost
    Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Restore from backup. See:
    iOS: How to back up
    - Restore to factory settings/new iOS device.
    -  Make an appointment at the Genius Bar of an Apple store.
    Apple Retail Store - Genius Bar

  • While playing temple run 'tilt' does not work !!

    Temple run issues :  tilt does not work smoothly. Need a hard left or right rotation of the device which turns into screen invisible.

    Hello there, Rajesh130591.
    The following Knowledge Base article offers up some great steps to try when troubleshooting issues with an app you've downloaded to your iOS device:
    iOS: An app you installed unexpectedly quits, stops responding, or won’t open
    http://support.apple.com/kb/ts1702
    Thanks for reaching out to Apple Support Communities.
    Cheers,
    Pedro.

  • Ipod shut off and home button does not work

    So my friends iPod shut off and her home button doesn't work, and if plugged in wont turn on either? We tried the alcohol method but it did not work, anyone have any suggestions on what to do. ( her warranty is also expired)

    Try:                                               
    - iOS: Not responding or does not turn on           
    Ignore the reset and when it says place the iPod in recovery mode
    Place the iPod in recovery mode using one of these programs:
    For PC      
    RecBoot: Easy Way to Put iPhone into Recovery Mode
    or
    http://joshuabailey1997.wordpress.com/2010/09/02/recboot-v1-3/
    If necessary:
    Download QTMLClient.dll & iTunesMobileDevice.dll for RecBoot
    and                                          
    RecBoot tip
    RecBoot may have problems on 64X windows, then try:       
    Tenorshare ReiBoot – Enter & Exit iPhone, iPad, iPod Recovery Mode with a Single Click
    For MAC or PC       
    The Firmware Umbrella - TinyUmbrella
    Installs blootware on PC too
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - Try another cable              
    - Try on another computer                                                       
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
    Apple Retail Store - Genius Bar                                     

  • [SOLVED]Amarok 2.0.2 Play/Pause Global Shortcut Does Not Work Properly

    Hello everyone,
    Just a quick question tonight. I have the global shortcut for Play/Pause in Amarok set to Ctrl+` which works in the sense that it causes Amarok to play. However, the problem is that it does not actually Pause the music, it merely resets to the beginning of the playing song. Any ideas on what could cause this? I've tried setting it to a different shortcut with the same end result. I'm using KDEmod 4.2.1.
    Last edited by zapyourit (2009-04-02 22:52:36)

    There are two different events, Play, that is what you use, and Play/Pause (IIRC, I'm at work now, cannot check it). Search for the other hotkey in the list, and set that to ctrl+`.
    PS: the problem with that will be, that if Amarok is stopped (not paused), this hotkey will not start playing, it merely pauses/unpauses, so you will need another hotkey to initiate playing.
    Last edited by SanskritFritz (2009-03-26 08:02:35)

  • Why my hp simple pass website login does not work with firefox latest version ?

    I have the latest version of firefox version 16.0.1 and my hp simple pass website login does not show up like it worked in IE9.

    I updated all the add ons already and I already reinstalled the HP simple pass after I installed firefox. I think that the new firefox is not yet compatible with the software (HP simple pass)

  • IPod in Recovery Mode Loop, Restore Does Not Work

    When I turn my iPod on it says "Connect to your computer. Use iTunes to restore." I connect it to iTunes, restore it and then it says that it is still in recovery mode and needs to be restored.
    Nothing I've tried has worked. I've put it in disk mode, I've changed the drive letter so Windows doesn't confuse it with anything else. I tried to go to the Genius bar but they were so backed up the only appointment I could get was for 8pm tomorrow!
    Hopefully someone can help!

    I've got the same problem with my iPod nano 3rd generation. I'll connect it to iTunes, and it says that an iPod has been detected in recovery mode, and it'll ask me to keep it connected to the computer. It'll then prepare it for recovery, and then tell me there's been an iPod detected in recovery mode. It'll perform this loop several times before I'm given the option to restore it, in which the iPod displays an old version of the iPod interface (I'm talking 1st or 2nd generation of the classic iPod).
    Once I'm given the option to restore, it says "Extracting software", finishes, and says that the iPod is being restarted, and then starts with the "iTunes needs to prepare your iPod for recovery. Please leave your iPod connected." loop once again.
    I would really prefer to not have to drive to the Apple store to get this problem fixed...

  • IPod Randomly Reset Itself, Now Apps Are Not Working!(4th gen)

    So, I was just browsing websites in Safari when this happened. I'm pretty sure I got linked to Tumblr and then my iPod decided to reset itself. After that, many apps refused to work, including Safari. Puffin Web Browser still worked, but it said that I was located in the United Arab Emirates, when I'm in the United States. Many YouTube videos refuse to work now also. I honestly have no idea what happened, and any help would be much appreciated.
    Thanks!
    Noah

    Software glitches happen
    Try:
    - Reset the iOS device. Nothing will be lost      
    Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Reset all settings                 
    Go to Settings > General > Reset and tap Reset All Settings.
    All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
    - Restore from backup. See:                                               
    iOS: Back up and restore your iOS device with iCloud or iTunes
    - Restore to factory settings/new iOS device.                       
    If still problem, make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
    Apple Retail Store - Genius Bar                                                              

  • Why my key scrambler 2.7.0 does not work with firefox 4.0?

    My plug-in Key scrambler 2.7.0 used to work with your firefox 3.6.16 but it doesn't work with firefox 4.0?

    S o l u t i o n : Just go to their site qfxsoftware.com (as seen in firefox "Add-ons" "Keyscrambler" "More".
    Their at "Download" get the Free Download Version for free, or Download the Pro or Premium Version (not free).
    KeyScrambler_Setup.exe has actual 1.164KB
    Install and voila, you have Version 2.7.1.0 and it works with Firefox 4.0 !!
    AGAIN, this nice Ad-on hasnt updated itself via the Firefox Browser, like it didn't when the last Firefox Version was new!
    Why? I think KeyScrambler is one of the most important Add-ons for my Browser, beside the Add-on "NoScript".
    Also when you search for "Key-Scrambler" via the Browser-Add-on-Search you cant find this Add-on anymore!!
    Maybe our Goverments didnt like it? ;)
    Think twice . . .

  • My belkin play max router software does not work with Lion

    Does anyone know if there will be a fix with this?  My imac is only 2 months old and my router is the same age.  Since upgrading to lion I have frequent dropouts and no working self-healing program.  I have changed channels with some succes but it's much less reliable than pre
    Thanks

    Here's their  reply, so the software is not compatible with Lion and no fixes in vew:
    Dear customer,
    Thank you for contacting Belkin Technical Support.
    I understand your concern and I would certainly be happy to help you.
    I regret the Inconvenience caused,
    Based on the Information provided, I am afraid to state that the Belkin software doesn't support MAC OS X Lion 10.7. As there are no drivers for it. We are aware of this issue. Our Engineers are working on it. We do not have any update about the new release for MAC OS X Lion 10.7. However, will keep you updated if there's any.
    Should you have any further questions, please take a moment to review our Knowledge Base at http://belkin.com/support
    Please ensure that in order to reply to this email, or access any attachments, you must follow the link shown above and click 'update' at the bottom of the email to be able to respond. Do not reply to [email protected] as we will not receive your email.
    Thank you,
    Mousin M D
    Technical Support Agent
    Belkin Technical Support.

  • When my ipod touch is on charge it does not work correct

    hello all
    i have noticed that when my new i pod touch 4th gen  is plugged in charging, when i try and use it its very difficult to do anything on it, just selecting a certain app seems to open a completely different on in a different location on the screen, and it just seems like when its plugged in charging the buttons seem not to work correctly
    has anyone else had the same problem

    Try:
    - Reset the iOS device. Nothing will be lost
    Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Reset all settings
    Go to Settings > General > Reset and tap Reset All Settings.
    All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
    - Restore from backup. See:       
    iOS: How to back up           
    - Restore to factory settings/new iOS device.
    -  Make an appointment at the Genius Bar of an Apple store.
    Apple Retail Store - Genius Bar

  • Just updated ipod 8gb touch to 4.2.1 and cannot sync applications, even though logged into iTunes 10.2 and they are there and logged into ipod with same account and syncing does not work

    appreciate any assistance

    I had also faced the same problem. After weeks of hunting, I found many apps compatible with ios 4.2.1
    Gun Bros
    Super KO Fight
    Gravity Guy
    I Must Run
    Men vs Machines
    Hit Tennis 2
    Optime Games
    Air Hockey Gold
    Real Tennis
    Football Kicks
    Frisbee Forever
    Spy Mouse
    Ninjump
    Office Jerk: Zombies
    The Walking Dead
    Angry Birds
    Angry Birds Season
    Office Jerk: Holidays
    Real Skijump
    MotoGP 2010
    Real Racing GTI 2010
    Asphalt Audi RS 3
    GTA Chinatown Wars
    Max Adventures
    Samurai Dojo
    Deer Hunter Challenge
    Cricket: Defend the Wicket
    Airport Madness Control
    There are lots more...Some of these games will probably be unavailable as it must've been upgraded
    Also check out this site: https://sites.google.com/site/appleclubfhs/support/advice-and-articles/finding-a pps-for-older-devices
    Hope this helps!

Maybe you are looking for

  • How to send IP pacekts by LabVIEW RT

    In a project,I use PXT RT controler and cRIO , need send IP packets to communicate with other PCs. I can use raw socket to send IP packets on the Windows,how to send IP pacekts on the Pharlap and Vxworks by by LabVIEW RT? There is somebody can help m

  • 'Not running in a hosted service or the Development Fabric' exception on deployed Worker role

    We are getting this exception after a worker role has been operating fine in production for several weeks.  Once this exception starts getting reported, it will keep getting it every time the worker role tries to access anything with the Diagnostics:

  • While Accessing UWL iviews - Issues with PCD Paths.

    Hello All, We Are using EP 7.0 SP 18. I am trying to access the UWL  iview with two different paths. Path1 :--> http://xxxx:50xxx/irj/servlet/prt/portal/prtroot/pcd!3aportal_content!2fevery_user!2fgeneral!2feu_core_role!2fcom.sap.uwl.home_core_ws!2fc

  • ERMS for SAP CRM EIC

    Hi Everyone! Our client wants to add ERMS for their EIC, now my question is, what do we need to remember or to do just to implement this? Can you give us some tips or guidelines in implementing this? Thanks, Marc

  • DPM 2012 - File server backup

    Hi, Is there any article about, what is the best practice to backup file server ? I'm backing up data to local storage and once a months to Tapes. what is the best practice to backup file server that contain doc, xls and more. Thanks, Lior