Why is 8gb only showing total memory of less than 6.5?

why is 8gb only showing total memory of less than 6.5?

Because the difference is due to the operating system taking up most of the diference and the other is how GB is advertised and actually used.
http://en.wikipedia.org/wiki/Gigabyte

Similar Messages

Question why has my balance on my itune account have totally disappeared when I have only been using it for less than a year? had still fair bit of money in it too. around $60

Question why has my balance on my itune account have totally disappeared when I have only been using it for less than a year? had still fair bit of money in it too. around $60

First, make sure you're logged into the iTunes Store using the account ID and password you set up, or used, when you redeemed your card/gift. If you are, try signing out of the account and back in.
If you're sure you are using the correct account and that you're signing in to the iTunes Store, and signing out and back in doesn't help, go to the Purchase History and review your purchases to make sure that you should indeed have a balance left. iTunes doesn't always refresh the balance it shows, so it's possible you spent the money and it just wasn't being reflected in the display. This display error can usually be corrected by logging out of the iTunes Store and then back in.
If you confirm that you should have balance left but the iTunes Store isn't showing it correctly, send a message to the iTunes Store customer service department through the contact form you'll find by selecting the most applicable section of their Support page (select the Contact Support link and follow the instructions) and explain the problem to them.
Good luck.

PO is getting released even if the total amount is less than the last PO am

Purchase Order is getting released even if the total amount is less than the last PO amount. The release strategy is only working for the first Purchase Order and if the PO amount is greater than the last PO amount.
Please let me know how to correct this scenario (release strategy).
Regards,
Prishu

Hi,
Release strategy has nothing do with the previous PO amount. May be, Co-incidently the amount in previous PO which you are referring and the characteristics value maintained in the release strategy is same.
1) Please go in release strategy by the path mentioned below
IMG u2013 Material Management u2013 Purchasing u2013 Purchase Requisition u2013 Release Procedure u2013 Procedure with Classification u2013 Set Up Procedure with Classification
2) Then go to release strategy. Here the total available release strategies would be displayed. Double click the strategy which is getting reflected in the PO you want and go the classifiction tab. There you will get the PO value. Based on this characteristic value the respective release streategy gets refelected.
I hope this clarifies.
Regards
sachin

SAP free memory is less than 30MB

HI Gurus,
I have a concerned with regards to the memory of our Server. As per checking from ST06N the free memory is less than 30MB.
Is this normal? Because everytime I reached this low memory Users could not log on resulting to restart the SAP application.
Here is the hardware details:
Server: AIX
CPU: 5GHZ
RAM: 16GB
Page File: 50GB
Instance parameter that might help you.
ztta/roll_area 6000640
ztta/roll_extension 4000000000
abap/heap_area_total 4000000000
abap/heap_area_dia 4000000000
abap/heap_area_nondia 4000000000
em/initial_size_MB 8096
Thanks in advance.
Best regards

Yes it is CI system. Below is the result of sappfpar
***ERROR: Size of shared memory pool 10 too small
================================================================
SOLUTIONS: (1) Locate shared memory segments outside of pool 10
 with parameters like: ipc/shm_psize_<key> =0
SOLUTION: Increase size of shared memory pool 10
 with parameter: ipc/shm_psize_10 =156000000
Shared memory disposition overview
================================================================
Shared memory pools
Key: 10 Pool
 Size configured.....: 134000000 ( 127.8 MB)
 Size min. estimated.: 153795112 ( 146.7 MB)
 Advised Size........: 156000000 ( 148.8 MB)
Key: 40 Pool for database buffers
 Size configured.....: 114000000 ( 108.7 MB)
 Size min. estimated.: 108871136 ( 103.8 MB)
 Advised Size........: 112000000 ( 106.8 MB)
Shared memories inside of pool 10
Key: 1 Size: 2500 ( 0.0 MB) System administration
Key: 2 Size: 6218836 ( 5.9 MB) Disp. administration tables
Key: 11 Size: 500000 ( 0.5 MB) Factory calender buffer
Key: 12 Size: 6000000 ( 5.7 MB) TemSe Char-Code convert Buf.
Key: 13 Size: 60500000 ( 57.7 MB) Alert Area
Key: 16 Size: 22400 ( 0.0 MB) Semaphore activity monitoring
Key: 17 Size: 2754336 ( 2.6 MB) Roll administration
Key: 30 Size: 51200 ( 0.0 MB) Taskhandler runtime admin.
Key: 31 Size: 4806000 ( 4.6 MB) Dispatcher request queue
Key: 33 Size: 10240000 ( 9.8 MB) Table buffer, part.buffering
Key: 34 Size: 4194304 ( 4.0 MB) Enqueue table
Key: 51 Size: 3200000 ( 3.1 MB) Extended memory admin.
Key: 52 Size: 40000 ( 0.0 MB) Message Server buffer
Key: 54 Size: 4202496 ( 4.0 MB) Export/Import buffer
Key: 55 Size: 8192 ( 0.0 MB) Spool local printer+joblist
Key: 57 Size: 1048576 ( 1.0 MB) Profilparameter in shared mem
Key: 58 Size: 4096 ( 0.0 MB) Enqueue ID for reset
Shared memories inside of pool 40
Key: 42 Size: 7056992 ( 6.7 MB) DB TTAB buffer
Key: 43 Size: 32494488 ( 31.0 MB) DB FTAB buffer
Key: 44 Size: 7914392 ( 7.5 MB) DB IREC buffer
Key: 45 Size: 4842392 ( 4.6 MB) DB short nametab buffer
Key: 46 Size: 20480 ( 0.0 MB) DB sync table
Key: 47 Size: 3073024 ( 2.9 MB) DB CUA buffer
Key: 48 Size: 500000 ( 0.5 MB) Number range buffer
Key: 49 Size: 2968344 ( 2.8 MB) Spool admin (SpoolWP+DiaWP)
Shared memories outside of pools
Key: 3 Size: 13714400 ( 13.1 MB) Disp. communication areas
Key: 4 Size: 531448 ( 0.5 MB) statistic area
Key: 6 Size: 319488000 ( 304.7 MB) ABAP program buffer
Key: 7 Size: 14838 ( 0.0 MB) Update task administration
Key: 8 Size: 67108964 ( 64.0 MB) Paging buffer
Key: 9 Size: 134217828 ( 128.0 MB) Roll buffer
Key: 14 Size: 4400128 ( 4.2 MB) Presentation buffer
Key: 18 Size: 917604 ( 0.9 MB) Paging adminitration
Key: 19 Size: 30000128 ( 28.6 MB) Table-buffer
Key: 41 Size: 25010000 ( 23.9 MB) DB statistics buffer
Key: 62 Size: 85983232 ( 82.0 MB) Memory pipes
Key: 63 Size: 409600 ( 0.4 MB) ICMAN shared memory
Key: 64 Size: 4202496 ( 4.0 MB) Online Text Repository Buf.
Key: 65 Size: 4202496 ( 4.0 MB) Export/Import Shared Memory
Key: 1002 Size: 400000 ( 0.4 MB) Performance monitoring V01.0
Key: 58900100 Size: 4096 ( 0.0 MB) SCSA area
Nr of operating system shared memory segments: 18
Shared memory resource requirements estimated
================================================================
Total Nr of shared segments required.....: 18
System-imposed number of shared memories.: 1000
Shared memory segment size required min..: 319488000 ( 304.7 MB)
System-imposed maximum segment size......: 35184372088832 (33554432.0 MB)
Edited by: Joel Cancio on Jan 14, 2011 8:11 AM

My 16 GB ipad says i have less than 1 GB of storage available. Yet when i add all the apps up, the total come to less than 9GB. i know the sytem need some but where is the rest of my storage being used?

My 16 GB ipad says i have less than 1 GB of storage available. Yet when i add all the apps up, the total come to less than 9GB. i know the sytem needs some but where is the rest of my storage being used?

Hi CPI Pierre,
You can determine what is using the memory in your iPad Air by looking at Settings > General > Usage > Manage Storage.
If you are having issues with insufficient memory you may want to troubleshoot using the steps in this article -
iOS: "Not enough free space" alert when trying to sync - Apple Support
Thanks for using Apple Support Communities.
Best,
Brett L

I have 8GB memory, but only shows total of 6GB

I have an early 2009 iMac with 8GB of memory, and before I upgraded to Mavericks, it would show a total of 8GB between used and available memory in my memory cleaning app.
Now, it only shows a total of 6GB between used and available memory.
Any reason it's not reporting the full 8GB of available memory?
Thanks,

What memory cleaning app and why are you using it...?
How much does "About This Mac" report..?
How much does "Activity Monitor" report..?

Why is iTunesHelper only showing up in 1 of my 3 accounts?

Hello,
This question pertains to the "iTunesHelper" application. It is a mysterious application that apparently runs in the background to enable the connection of ipods. This is from some info I obtained from google and on this apple discussion forum.
Before I knew what "iTunesHelper" was, I considered deleting it from my login items however I think I will just leave it because I am sure Apple OSX has a good reason for putting it there.
Here's my question:
I have three accounts. Why is the "iTunesHelper" application only listed in the login items of only one of my three accounts?
The "iTunesHelper" application shows up only in the login items of the first account I set up. Then, I set up two more accounts and the "iTunesHelper" does not appear in their login items. Does this mean that itunes and ipods will only work properly with my first account?
Should I try to figure out a way to add it to my other two accounts? Should I delete it from my first account? I have a feeling I will just leave it and all is OK but I thought I would see if anyone else had any thoughts on this mysterious application and if there is any problem with the fact it only appears in 1 of my 3 accounts.
PS. Here is where you will find the "iTunesHelper" application listed as a login item:
system preferences/accounts/login items/
Another funny thing about iTunesHelper is that many references to it are from people with PCs running Windows. I am using a mac and I see it listed in my login items. i wonder if it has any purpose on macs or if later Apple might make use of it more.

Thanks Roger for your helpful reply,
If this is the case, then I have a problem because since I set up my computer I removed the "admin" designation from the first account and instead I assigned the "admin" designation to the second account that I set up. Because iTunesHelper only shows up on the first account (which is no longer "admin"), my system no longer has iTunesHelper on the admin account (when you login the admin account, iTunesHelper is not in the list of login items). iTunesHelper is only in my first account which is a non-admin account. Is this a problem?
Does this mean that my current admin account (the second account I set up) and my third account (a non-admin account) will not have access to iTunesHelper? And if so, is this a problem?
What if the account that happens to have iTunesHelper is rarely used (never logged into)? Will the other accounts never be able to make use of iTunesHelper if the iTunesHelper account (the first account - regardless of whether it is admin or non-admin) is never logged into?
There must be some way to control or assign which accounts have iTunesHelper as a login item.
My only explanation is that iTunesHelper may not be important.
Could anyone offer any insite on this?
Thanks

Satellite C855-2F3 is not showing total memory

I have a Satellite C855-2F3 running win8 64bit. It has 8gb ram installed but it is currently only showing 2gb.
What could cause this/resolve this?

Sorry, yes, it was late and I was tired, problem has been solved now. I had to clean the cooling system out today and when I put the laptop back together it now shows 6gb, it may have just come lose.
Thanks.

SAPScript: why the window only show the LAST line

Dears,
In my form, one of the window only show the LAST line of the it.
I have set the window enough space, also when debuging the program , open_form, write_form,
all of those sy-subrc = 0.
both static texts and dynamic texts are set in the window, but only the last line shown.
Anyone could help me?
Thanks a lot.
Sincerely,
Julie Lv

Hi,
There are several possibilities to resolve your problem.
You can work with 2 main windows on in1 page.
With NEW-WINDOW you switch to the next main-window
How to use it.
make an item in main window with that /: NEW-WINDOW command
if you are ready with first loop call a WRITE_FORM with that NEW-WINDOW statement.
to cojntinue in the other main.
Other possibility is. (in case there are not ot many lines)
Use for every line other variable names.
Fill these in the loop. And after loop WRITE FORM
eg. (if maximum is 3 lines)
&VAR1_1& &VAR1_2& &VAR1_3& &VAR1_4&
&VAR2_1& &VAR2_2& &VAR2_3& &VAR2_4&
&VAR3_1& &VAR3_2& &VAR3_3& &VAR3_4&
Hope this helps.
Gr., Frank

Why does firefox only show one window in my taskbar when i multiple tabs open it worked yesterday

today when i booted my computer firefox would not open everytime i clicked on it so i tried to redownload it after it installed it actually just upgraded and now it works again but when i have more than one tab open it will only show active tab in my taskbar internet explorer still shows multiple tabs not sure whats going on

It still chops off the top of the personas :( I think I'll uninstall v8 and go back to v3 Firefox, those were the glory days! haha

Why does history only shows sites visited in current session?

I use history to go back to sites I have visited but history only shows where I have been in the current session. It only has todays sites to choose from and those are only from the current session. I.e if i go to a site in the morning and go to visit it in the afternoon there is no trace of it. I share this computer and dont want to clutter up the bookmarks page.

Are you clearing history when shutting down Firefox? Check in Options > Privacy and see if "Clear history when Firefox closes" is checked. If so, click the Settings button and see what is set to be cleared.

Why is firefox only showing today and yesterday's history?

firefox will only show me today and yesterday's history, how can i see the history before that? i did clear recent history a few days ago but i should have more history then just today's and yesterday's.

'''''Firefox Settings > Privacy'''''. About the middle of the page is the label;
'''History.''' Next to '''Firefox will''', select;
'''Use custom settings for history'''. 
Deselect '''Always use private''' if it is on. 
Select '''Remember browser / download history.''' 
 If you want, you can decide how the other setting should be. 
If you want, select; '''Clear history when Firefox closes'''. Then, press the
'''Settings''' button on the far right. Then choose what is removed. You can
set this up as you wish. On mine, I only have the '''clear cache''' option on.

Memory gates checking failed because the free memory is less than 5% of total memory

·         Business
Goal: Achieve a stable environment
·         Repro
Steps: n/a
·         Expected
Results: I expect the MSCRM Async services to use a relatively static amount of RAM
·         Actual
Results: Over the weekend, the memory hit critical mass and CRM failed
·         Environment:
Windows Server 2008, SQL Server 2008, CRM 2013 On Premise - both on the same box, Email Router is installed on the same box. We have not yet applied either of the two new UR for 2013.
I'm currently experiencing a memory leak in our production environment. I will fill out the details shortly.
Here's the error:
Log Name:      Application
Source:        System.ServiceModel 4.0.0.0
Date:          4/20/2014 11:39:14 PM
Event ID:      3
Task Category: WebHost
Level:         Error
Keywords:      Classic
User:          NETWORK SERVICE
Computer: server.domain.com
Description:
WebHost failed to process a request.
Sender Information: System.ServiceModel.ServiceHostingEnvironment+HostingManager/58366981
Exception: System.ServiceModel.ServiceActivationException: The service '/VisualWorkplace/XRMServices/2011/Organization.svc' cannot be activated due to an exception during compilation.
The exception message is:Memory gates checking failed because the free memory (1240145920 bytes) is less than
5% of total memory. As a result, the service will not be available for incoming requests. To resolve this, either reduce the load on the machine or adjust the value of minFreeMemoryPercentageToActivateService on the serviceHostingEnvironment config
element.. ---> System.InsufficientMemoryException: Memory gates checking failed because the free memory (1240145920 bytes) is less than 5% of total memory. As a result, the service will not be available for incoming requests. To resolve
this, either reduce the load on the machine or adjust the value of minFreeMemoryPercentageToActivateService on the serviceHostingEnvironment config element.
   at System.ServiceModel.Activation.ServiceMemoryGates.Check(Int32 minFreeMemoryPercentage, Boolean throwOnLowMemory, UInt64& availableMemoryBytes)
   at System.ServiceModel.ServiceHostingEnvironment.HostingManager.CheckMemoryCloseIdleServices(EventTraceActivity eventTraceActivity)
   at System.ServiceModel.ServiceHostingEnvironment.HostingManager.EnsureServiceAvailable(String normalizedVirtualPath, EventTraceActivity eventTraceActivity)
We just recently increased the available memory from 8GB to 24GB to help ensure that there is enough memory. This error never happened on CRM v4. According to the resource monitor, SQL is only reserving 20.7GB of RAM and there is 694MB of RAM in Standby.
The main Async service is using 660MB and the maintenance Async service is using 265MB.
To resolve the issue temporarily, I restarted both Async services this morning. Shortly after everything came back, they were holding fairly steady around 350MB and 200MB. It's been six hours since then.
The last time I spoke with Microsoft about a similar problem, they suggested increasing the amount of RAM.

It became more and more of a problem. It was impacting the users in a more subtle way at first. You couldn't configure the CRM for Outlook client. After a while, they couldn't use CRM in Outlook at all and users reporting not being able to complete phone
call activities. I opened a ticket with MS and they suggested the same as Wilson Lou did. The organization error had nothing to do with the creep on the async services usage of RAM. It was indeed caused by SQL stealing all of the memory. Limiting the max usage
to 24GB RAM has resolved that error.
My Async processes are still using a LOT of RAM, but now that I have more than enough RAM, it doesn't seem to be a problem anymore. They are currently using about 700MB RAM each.
Also, I have upgraded to SP1, UR2.
Eric Hula - CRM Administrator

Photosmart 5520 showing new cartridges as less than half full

I've just replaced the three colour cartridges with genuine HP cartridges.
There are no printing problems, no error message, yet the Cyan and Blue cartridges are only showing less than half full. The yellow one is showing full.
I've tried all the steps on the trouble-shooting page here but no change.
Is there a solution?

Hi gordonbp,
Welcome to the HP Forums, I hope you enjoy your experience! To help you get the most out of the HP Forums I would like to direct your attention to the HP Forums Guide First Time Here? Learn How to Post and More.
I see that the colour ink cartridges are not giving an accurate reading. I do have a couple troubleshooting steps that I would like to run through to see if we can get this issue resolved for you.
First off, if you have the printer power cable connected to a power bar/strip, please remove it and connect the power cable direct to a wall outlet. Here is a document that explains the Issues when Connected to an Uninterruptible Power Supply/Power Strip/Surge Protector. Please note that the printer that is listed in this document is a LaserJet printer and that this is only used as an example seeing that the power issue applies to HP products in general.
I would also suggest that you attempt to reset the printer once the power cable is in a wall outlet. Here is a document that explains how to do a basic Reset on the printer.
Thank you for your time.
Click the “Kudos Thumbs Up" at the bottom of this post to say “Thanks” for helping!
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
W a t e r b o y 71
I work on behalf of HP

Why my ipod touch 4 gen battery last less than a minute

hi i have a problem with my ipod touch 4 gen battery. one mothn ago my girlfriend drop my ipod toch and it broke the screen but i can still use it. the only problem is now battery runs out in less than a 1 minute . does that means i have to replace the battery ? it charge and is say fully charge but it wont lass more than a minute on can someone tell me whats going on please .. thank you..

You iPod is broken. It appears it is more than the screen and maybe more than the battery.
Apple will exchange your iPod for a refurbished one for $199 for a 64 GB on and $99 for the others. They do not fix yours.
Apple - iPod Repair price
A third-party place like the following maybe less. Google for more.
iPhone Repair, Service & Parts: iPod Touch, iPad, MacBook Pro Screens
Try fixing it yourself if you are up to it
iPod Touch Repair – iFixit

Why is 8gb only showing total memory of less than 6.5?

Similar Messages

Maybe you are looking for