Why is a 25-pin connector instead of a 29-pin connector?

Where can I found a cable to my 30" monitor? I tested an single link cable 19-pins without success.
I want to connect my MacBook Pro to a HP LP3065 monitor and use a resolution at 2560x1600 pixels.

Evidently you have a DVI-I cable. What you need is a DVI-D cable, which lacks the four extra pins in DVI-I that are used to carry an analog signal. Why anyone wants an analog signal in a DVI connection, I have no idea, and your DVI adapter doesn't provide for any, so there's no place for those four pins to go. You need a cable like this:
http://www.monoprice.com/products/subdepartment.asp?c_id=102&cp_id=10209&cs_id=1 020902
You can enlarge the pictures to confirm that the ends of the cables match your adapter.
Here's a rundown on the different types of DVI cables and connectors. Scroll way down the page for diagrams showing the pins.
http://en.wikipedia.org/wiki/Digital_Visual_Interface

Similar Messages

  • Got a fan with a three pin conecter instead of a four pin conecter

    So I bought a fan  for my HP Pavilion g6 and you know the little plug on the end of the fan wire, well it had a three pin instead of the four pin plug that the original fan had. And I made sure it was the right computer when we orderd the fan. I was wondering if theres a way to maby snip the wires and splice it into the old plug and then just join one of the wires together or somthing, becuase at the moment its running at full blast becuase it dosent have the controll wire to tell it what speed to run at. Please help!
    This question was solved.
    View Solution.

    Hi,
    The part store says you need part # 641024-001:
         http://partsurfer.hp.com/Search.aspx?SearchText=A6Z72UA
    which is for the following machines:
        http://partsurfer.hp.com/Search.aspx?SearchText=641024-001
    You can see it has 4 cables: red, white, blue and dark yellow as shown:
       http://www.ebay.com.au/itm/NEW-HP-641024-001-Laptop-fan-for-HP-Pavilion-G6-1D26DX-G6-1000-/181173886...
    Which part did you order ? Definitely it's not the right one.
    Regards.
    BH
    **Click the KUDOS thumb up on the left to say 'Thanks'**
    Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

  • Please help me!! Why has this connector cable got an extra pin as well as USB?

    Hello,
    Could someone please tell me why this HP External DVD drive has a strange USB + pin connector?
    (EXT MB CRADLE P07456 CNU402170K, 4K0412 Rev V1.01)
    I am thinking of buying it to use with my HP mini 210-1004sa but am not sure if I can either buy a standard USB cable to use or whether I should steer well clear.
    Can someone please let me know if this connector is specifically for some other machine, or whether I should be ok to go ahead and buy it.
    Many thanks
    Kim

    Your testing confirms my suspicion that it’s a pathing problem
    “Then I tested out the index.html and the index.php files that are located in 'deploy'
    They didn't work.  no image at all ... nothing. “
    That is working correctly. If you path it to work from the Web page, of course it will not work from “index.html” in the deploy folder… it’s not supposed to. It’s supposed to work from the Web page one folder level up. Did you test it from YOUR Web page after changing the paths?
    “I noticed that as I said the index.html and the index.php didn't work ... but the mp3player_v4.swf STILL worked perfectly fine.  All 3 of those files are under 'deploy'”
    This is also to be expected, because when testing the .swf directly (not on YOUR Web page), the paths in the xml file to the mp3s is correct. But remember, when you place that .swf on YOUR Web page, you are removing the .swf from “deploy” and placing it in the same folder as your Web page….. it’s not in deploy anymore.
    “Also, a peculiar thing happened as well as I was playing around with things. “
    Well for testing you could take everthing out of “deploy” and move it into the same folder as YOUR Web page and just change the path on your web page to the .swf (delete the “deploy/” part). Now every thing is in the root folder, there is no deploy folder, only a “sound” folder which holds the mp3s and the palyer would work just fine, because RELATIVE to the location of the .swf on the WEB PAGE, all the paths are correct.
    But then you don’t really learn how to resolve pathing issues.

  • Can I connect my iPad mini to a data projector using a lightning to 30-pin adapter connected to a 30-pin to VGA connector? Or will this only work with a lightning to VGA connector.

    Can I connect my iPad mini to a data projector using a lightning to 30-pin adapter connected to a 30-pin to VGA connector? Or will this only work with a lightning to VGA connector?

    The lightning to 30 pin adapter does not support video as per the item description in the Apple online store:
    http://store.apple.com/us/product/MD823ZM/A/lightning-to-30-pin-adapter
    This adapter lets you connect devices with a Lightning connector to many of your 30-pin accessories.* Supports analog audio output, USB audio, as well as syncing and charging. Video output not supported.
    You will need to the Lightning to VGA adapter directly
    http://store.apple.com/us/product/MD825ZM/A/lightning-to-vga-adapter?fnode=3a
    Or the Lightning Digital AV Adapter
    http://store.apple.com/us/product/MD826ZM/A/lightning-digital-av-adapter
    If the projector supports HDMI input.

  • Is there a way to adapt an older ipod with 30-pin to a new dock with lightning connector?

    Is there a way to adapt an older ipod with 30-pin to a new dock with lightning connector?

    The Apple on-line store has two 30-pin to lightning adapters, but they are the wrong direction from what you want.  Try a Google search, or drop in an Apple retail store and see if they have what you need.

  • HT3529 why does my email show up instead of my number

    why does my email show up instead of my number? when im using imessage..

    Try going to Settings>Messages>Receive At>Caller ID, if your email address is select here select your phone number instead.

  • Why do we use init() method instead of constructor to initialize a servlet?

    Why do we use init() method instead of constructor to initialize a servlet?

    I suspect the reasons are partly historical. A servlet is loaded dynamically, by class name and, once you've loaded the Class, it's easier to to a newInstance, using the default construtor than it is to search for a particular matching constructor and invoke it.

  • Why not we lock these schemas instead of change the password

    The documentation mentioned that the following schemas belong to individual APPS base products. By default the password is the same as the SCHEMA name. Changing the password for these schemas does not affect any configuration files.
    ABM AHL AHM AK ALR AMF AMS AMV AMW
    AP AR ASF ASG ASL ASN ASO ASP AST AX AZ
    BEN BIC BIL BIM BIS BIV BIX BNE BOM BSC
    CCT CE CLN CN CRP CS CSC CSD CSE CSF CSI
    CSL CSM CSP CSR CSS CUA CUE CUF CUG CUI
    CUN CUP CUS CZ DDD DOM EAA EAM EC ECX
    EDR EGO ENG ENI EVM FA FEM FII FLM FPA
    FPT FRM FTE FUN FV GCS GL GMA GMD GME
    GMF GMI GML GMP GMS GR HR HRI HXC HXT
    IA IBA IBC IBE IBP IBU IBY ICX IEB IEC IEM IEO
    IES IEU IEX IGC IGF IGI IGS IGW IMC IMT INV
    IPA IPD ISC ITG IZU JA JE JG JL JTF JTM JTS LNS
    ME MFG MRP MSC MSD MSO MSR MST MWA
    OE OKB OKC OKE OKI OKL OKO OKR OKS OKX
    ONT OPI OSM OTA OZF OZP OZS PA PJI PJM PMI
    PN PO POA POM PON POS PRP PSA PSB PSP PV
    QA QOT QP QRM RG RHX RLA RLM SSP VEA
    VEH WIP WMS WPS WSH WSM XDO XDP XLA
    XLE XNB XNC XNI XNMXNP XNS XTR ZFA ZPB
    ZSA ZX
    If not affect any configuration files, why not we lock these schemas instead of change the password.

    These are the Schemas Shipped with E-Business Suite.
    In oracle EBS there is lot of inter dependency present between all schemas. For dependency pls check following link;
    http://etrm.oracle.com/pls/et1211d9/etrm_search.search
    Also go through below note id
    Best Practices for Securing the E-Business Suite [ID 189367.1]
    Regards,
    Nitin J.

  • Why are photos save as .jpeg instead of .jpg?  Can this be corrected?

    Why are photos save as .jpeg instead of .jpg?  Can this be corrected?  In certain applications I have to manually change the ending so that the application can open the photo.  Is there a setting to control to correct this?

    When I mail photos (via GMail) from my iPhone they are received on my PC as .jpg files, even if sent at full resolution.  Perhaps your e-mail service has imposed an attachment size limit, and in the process scales the attached picture down and alters the file extension?
    What happens if you e-mail a photo from your iPhone and open the message from a PC instead of the Surface?  What e-mail service are you using? (e.g. your ISP's service, or Yahoo, Gmail, iCloud, etc.)  When you send the photo from your iPhone, are you selecting a reduced resolution?

  • Why should we go for job instead of trigger

    hi all,
    whats the exact purpose of job n trigger?
    why should we go for job instead of trigger?
    any one pls help me regarding this
    thnaks in advance.

    When you have code that is to be called, implementing it with a trigger leaves the process synchronous. In other words: the code is executed within the same transaction as the invoking code. This means real-time, but it makes your transaction heavier. Implementing it with a job, makes it asynchronous. In other words: the code gets executed in another session. Now it is not real-time anymore, but since it is executed in the background, nobody cares anymore how long it takes (to a certain point of course).
    Regards,
    Rob.

  • When / why use XML to store data instead of database table ?

    Hi All,
    I still not use XML much in applications and don't know much about its utilization.
    I read here and there about storing data as XML instead of into database tables.
    - could any body please tell me when / why use XML to store data instead of database table ?
    e.g : store inventory per warehouse in XML format. ?
    - What is the other cases or reasons of extracting database records into XML or vice versa ?
    - is there any good pdf on this ?
    Thank you for your help,
    xtanto

    It depends entirely what you want to accomplish with the 'XML in the database'. There are basically 3 independent methods: As CLOB, as XMLType views or as native XMLType 'columns'
    Each method has advantages and disadvantages, especially in the performance vs purpose tradeoff.
    The Oracled Press book "Oracle Database 10g XML & SQL Design, Build, & Manage XML Applications in Java, C, C++, & PL/SQL" is highly recommended for anyone interested in Oracle and XML. http://books.mcgraw-hill.com/getbook.php?isbn=0072229527&template=oraclepress

  • Why does my status say wolstanton instead of via mobile or iphone

    why goes my status say wolstanton instead of via mobile or via iphone

    Click this link and the download.
    http://www.apple.com/itunes/download/
    Allan

  • Why does my real name appear instead of my screen name?

    Why does my real name appear instead of my screen name?

    It only appears for you when your signed into the forum.
    (nobody else but you can see your real name)
    more info:
    Real name instead of Screen name displayed
    This is what i see:

  • Can iPod touch 5g connect to an audio amplifier via lightning to 30 pin adaptor and through a 30 pin to RCA cable adaptor

    Can the iPod touch 5g connect to an audio amplifier via lightning to 30 pin adaptor and through a 30 pin to RCA cable adaptor? It works on the latest iPod nano but it doesn't on iPhone 6. I have spoken to the apple reseller sales personnel but he has no clue.

    If it works on the 7G Nano and does not on the iPhone 6 I would not expect it to work on the 5G iPod..
    Just what adopter are you talking about? Can you provide a link?

  • HT5622 I downloaded the upgrades on my phone last night and apparently i did a 4-digit pin.  there are only 2 pins i ever use and i tried both of these but now my phone is locked, neither pin worked.  what do i need to do.

    I downloaded updates to my phone last night.  I guess I created a 4-digit pin.  there are only 2 pins that i ever use and neither one of these work.  now my phone is locked.  what do i need to do

    Hey carla1958,
    Thanks for the question. The following article provides some solutions if you are having issues with passcode lock:
    iOS: Forgotten passcode or device disabled after entering wrong passcode
    http://support.apple.com/kb/HT1212
    If you have never synced your device with iTunes, or you do not have access to a computer
    If you see one of following alerts, you need to erase the device:
    "iTunes could not connect to the [device] because it is locked with a passcode. You must enter your passcode on the [device] before it can be used with iTunes."
    "You haven't chosen to have [device] trust this computer"
    If you have Find My iPhone enabled, you can use Remote Wipe to erase the contents of your device. If you have been using iCloud to back up, you may be able to restore the most recent backup to reset the passcode after the device has been erased.
    Alternatively, place the device in recovery mode and restore it to erase the device:
    1. Disconnect the USB cable from the device, but leave the other end of the cable connected to your computer's USB port.
    2. Turn off the device: Press and hold the Sleep/Wake button for a few seconds until the red slider appears, then slide the slider. Wait for the device to shut down.
    3. While pressing and holding the Home button, reconnect the USB cable to the device. The device should turn on.
    4. Continue holding the Home button until you see the Connect to iTunes screen.
    5. iTunes will alert you that it has detected a device in recovery mode. Click OK, and then restore the device.
    Thanks,
    Matt M.

Maybe you are looking for