Why is a pdf created by PDFScanLib v1.2.2, so much smaller/higher quality than one made in Acrobat?

I'm currently scanning documents at 600 dpi, compressing to jpeg, and creating PDFs from there. Pdfs are usually 20-30 pages, and are about 20mb. After OCR, and reducing the jpegs to 400dpi, I can get the file size down to about 11mb. However, some pdfs I've found as 'benchmarks' are under 1mb for 15-20 pages. The only difference I can find are that they are produced in PDFScanLib. Is that responsible for the difference?
Thans for any help you can pass along

Hi Bob,
That's the strange thing. When I had both GHz channels working on one SSID, once in a while my iMAC would pick the 5 GHz channel (44 seems the best for me). I always use channel 1 for 2.4 GHz because I get the fastest speeds with it.
When the iMac would pick 5 GHz, the slowdown was very obvious. As I explained in my (long) first post, I immediately felt the difference. Now the $50K question - since the 5 GHz channel at that point was stronger than the 2.4 GHz one, why wasn't the speed faster? Why was it so slow compared to 2.4 GHz? That's what rattling my brain. If the 5 GHz signal's strong enough to get picked by my iMac, then why isn't there a commensurate speed increase? There must be something else going on here besides signal strength. If the 5 GHz spec says that I must have full strength to get 5 GHz speeds, then that makes sense. But I think it doesn't, that's why I believe I have a configuration problem somewhere, or a faulty AEBS.
I might add that my firmware's up-to-date in the AEBS and AX, and Airport Utility too.
I think heading to 4Runner's camp - even with high signal strength (and I would consider 3 of 4 bars high), the 5 GHz speeds aren't showing themselves.
Here's some snap's of my AEBX's setup:
I think my configuration's fine, although I've tried so many different options, I'm a little confused, but I know that changing the Multicast Rate doesn't have any noticeable effect on the speed. I also have "Use Wide Channels" checked, but as I said, the 5 GHz band is awfully slow for using both channels. I have set "N" only, so no "G" clients to slow it down.
Mind boggling!

Similar Messages

Creating form - want to change font style and size in more than one field at a time HOW??

creating form - want to adjust font style and size in more than one field at a time - HOW??

Select the fields with the mouse, right-click one of them, go to Properties
and set the settings you'd like them all to have.
On Wed, Jan 21, 2015 at 8:51 PM, chuckm38840797 <[email protected]>

CS6 InDesign - Default display is high-quality. Four placed images are Illustrator files. Three images look the way they should - high-quality. One image looks pixelated. Why?

InDesign CS6 - Default display is high-quality. All four placed images are Illustrator files. Three images look the way they should - high-quality. One image looks pixelated. Why?

Not sure if this will help, but what is your inDesign file's "Transparency Blend Space" set to? It's under the edit menu.
Also, when you are placing your images, are you selecting "Show Import Options" and making any selections there?

Why are iPhotos previews higher quality than my exports?

I have just now noticed this after using it for so long. I was using it to de-noise a photo I took earlier today and turned it up to 100%. I looks clean and smooth like I want, so I exported it first as a jpeg with max quality, but I noticed a lot of noise in it. So I exported it again as an original and it looks the same still. I just exported it as Current to see if there is still noise, and there is. I have exhausted the other formats as well, all export with noise.
I put iPhoto in fullscreen mode and took a screen cap of the photo via cmd+shift+4, and compared the the screen cap to both of the exports and it looks much cleaner, even though its more than half the resolution being displayed.
This is not right, plain and simple.
Here are two links, one to the original export, and the other is a screen cap.
http://dl.dropbox.com/u/68608/IMG_0006.JPG
http://dl.dropbox.com/u/68608/Screen%20Shot%202011-08-06%20at%2010.06.48%20PM.pn g
What am I doing wrong? Are my eyes playing tricks?

I just came to my local Apple dealer to get help and they have never encountered this before. Questions they asked that made it less clear for them; they were shot in jpeg and I have exported using every setting all yielding the same results.
This sounds to be a software issue and I encourage Apple's staff to investigate it.

All my pdf files can be printed in low quality on my Brother printer but can't print in high quality in the printer menu.

My problem is that all my pdf files can be printed when I choose "low quality printing" in my Brother printer menu but cannot be printed in "high quality". When trying to print in high quality, the documents load in the printer tray and it says 1 document then disappears and 0 document printing is showing. I have some pdf files that I want to print in color in high quality and black and white but I'm unable to do so. It only prints in low quality for both color and black and white.

Hello,
1. Please make sure that your Reader is updated to 11.0.09. Go to Help -> Check for Updates.
2. Also, please check if there is any new update available for your Printer Driver.
Regards,
Anoop

Documents Created Seen in more than one report globally

Hi Experts,
I would like to know whether the documents can be created globally? such that they can be seen in more than one queries in common.
For better understanding my requirement is to know whether the documents can be created in such a way that they can be seen in common in more than one queries so that the business looking at one report should be able to see all the commentary/documents created on that particular Infoprovider. I hope I am clear in my question. Quick response is appreciated as this is an urgent requrement.
Cheers,
Sunitha.

Hi,
I know the documents are created on the characterisitcs combinations, but my requirement is to get the documents that are created on more than one query. That is I should be able to see the documents in my query created on all the queries defined on the Infoprovider.
For that reason I am checking the document properties in RSA! to see whether the documetns are created on the query level or on the Infoprovider level.
As you told the documents are created on the characterisitcs level but I am not able to see the docuemtns icon ordocuments on the characterisitics in the BEX .
Regards.
Sunitha

Taking ref. more than one billing documents during creating sales order

Hi everybody,
During creating sales order with reference, how can i take reference more than one billing documents?
Thanks.
Best regards.
Kaan Özdöker
Astron

Hi all,
Thanks for the helpful answers. I realized after your answers, my question was misunderstood.
Ok, i can refer to billing documents one by one in the sales order creating screen i know, but i want to refer to many billing documents at once.
In this mean, Srinath'a answer was very helpful. As i thought there is no other way except user-exit modification or new routine.
Thank you all.
Best regards.
Kaan Ozdoker
Astron

How do I attach more than one PDF to an email?

How do I attach more than one PDF to an email?

It depends upon what app that the PDFs are in and whether that app allows you to select more than one file/PDF to attach to an email - if the app that you have doesn't support it then there are other apps which support PDFs which do e.g. GoodReader.

JAI - Creating High Quality thumbnails

I am using JAI to take in large images and proportionally resize it to around ~300 x 220 image.
Using the "scale" returns horrible quality
ParameterBlock pb2 = new ParameterBlock();
pb2.addSource( src );
pb2.add( scale );
pb2.add( scale );
pb2.add( 0.0f );
pb2.add( 0.0f );
JAI.create( "scale", pb2, null );Using "subsampleaverage" is much better, but still returns worse quality than the original.
ParameterBlock pb2 = new ParameterBlock();
pb2.addSource( src ); // The source image
pb2.add( ( double ) scale ); // The xScale
pb2.add( ( double ) scale ); // The yScale
pb2.add( new InterpolationBicubic2(8) ); // The interpolation...I Tried all Interpolation Types already
JAI.create( "subsampleaverage", pb2, null );I want an exact quality copy of the original. Is there a way to do this in JAI?

I mean in photoshop it saves much clearer (higher
quality image) than through JAI. I know in Photoshop
you can choose clarity on a scale from 1 to 12 when
saving image files for the web. The only thing I see
in JAI is interpolation which provides 3 or 4 choices.Ah, you mean the JPEG codec quality level. JAI's JPEGTileCodecDescriptor has a quality resource:
"A factor that relates to the desired tradeoff between image quality and the image data compression ratio. The range of this parameter is from 0.0 to 1.0. A setting of 1.0 produces the highest quality image at a lower compression rate. A setting of 0.0 produces the highest compression ratio, with a sacrifice to image quality. The default value is 0.75."

Why can I not create a PDF from a web page on my Adobe Acrobat 8 Pro on my new Windows 8 computer? It worked fine on my windows XP system?

Why can I not create a PDF from a web page on my Adobe Acrobat 8 Pro on my new Windows 8 computer? It worked fine on my windows XP system?

Acrobat 8 is not compatible with Windows 8, for the simple reason it was
created much before it and Adobe could not participate the changes to the
OS that Microsoft implemented many years later on. You need to buy the
current version for compatibility.

Why is the Adobe PDF Create add-in no longer supported by FF 25?

I am using FF 25 on a Windows 7 Pro x64 system. Recently, I did an OS reinstall and with it a reinstall of Firefox. After importing my old profile, I noticed that the Adobe PDF create button was missing. This is a very handy application in my daily workflow.
Going to the Add-ons manager, I noticed that the Adobe Acrobat - Create PDF 1.0 add on is disabled in FF 25. Why was support removed for this?
I tried using another PDF add-on, but it caused the browser to hang and it had to be removed. Is there a reliable option for saving a web page as a PDF? (other than using a Mac).

That message means the addon needs to be updated to be compatible with the latest version, if that addon is essential, you can revert to a older version.
* [[Install an older version of Firefox]]
* [[Re-enable add-ons that were disabled when updating Firefox]]
If the second article doesnt work, the above applies.

Why doesn't Acrobat XI, pdf created in Corel Vetnura 10, print to my Epson Gluntz & Jensen ictp Plat

Why doesn't Acrobat XI, pdf created in Corel Vetnura 10, print to my Epson Gluntz & Jensen ictp Platemaker?

We aren't in a position to provide any reasonable response to this type of open-ended question without significantly more information.
Exactly what symptoms are you seeing? Are you getting a failure message from Acrobat? If so, what? Are you getting a PostScript error at the printer? For that matter, is it PostScript printer of some type? If part of the job prints, what doesn't print?
More information and maybe be can assist you!!
- Dov

Why does a PDF file created in Pages, attached to e-mail, not get sent?

Why does a PDF file created in Pages, attached to e-mail, not get sent? I even blank copied myself and nothing seems to have been sent. Could it bee the size of the PDF file?

They send for me, my test document was 3.8 MB.

Why can't I import a .txt file to a PDF created in Livecycle Designer?

I am trying to import data into a PDF, simple stuff like names and addresses. I've saved my spreadsheet as a tab delimited .txt file, but when i go to import data in the PDF, .txt files are not an option. Is there a setting in Livecycle or in Acrobat that I haven't found?

Is there a way for me to import the data to a PDF created in LiveCycle designer?

Photoshop to pdf creates text and images that are not sharp. Why?

I know that Photoshop is not the premier pdf creation software. I do have InDesign as well, but I'm much more familiar and comfortable with Photoshop (I have the CC versions of both) so I prefer to use it as my design and layout tool.
However, when I save as a pdf the resultant pdf file is blurry for images and text, not horribly so, but not sharp and clear as I would like. My pdf files are for the web and emailing so I need to keep the file size in check, but even when I up the PS resolution to 300psi it still is not as clear as I would like. Still blurry.
What do you Photoshop experts out there do to produce the sharpest pdf possible? Is it even possible using Photoshop only or do you have to use InDesign or Acrobat Pro to get the clarity and shapness?

mabehr1234 wrote:
I know that Photoshop is not the premier pdf creation software. I do have InDesign as well, but I'm much more familiar and comfortable with Photoshop (I have the CC versions of both) so I prefer to use it as my design and layout tool.
This is kind of like saying "I know that a screwdriver is the correct tool for inserting screws, but I'm much more comfortable using a hammer, so I prefer to just hammer the screws in."
It works, sort of. But the results will never be as good. And you wouldn't want to use the screwdriver with nails, either. There are two different tool (programs) for a reason, and I think once you learn InDesign, you will find it to be a much better layout tool than Photoshop.

Why is a pdf created by PDFScanLib v1.2.2, so much smaller/higher quality than one made in Acrobat?

Similar Messages

Maybe you are looking for