Why is a single Cross Reference text turning red after doing an Update?

After updating a large book in FrameMaker10, the same cross-reference made in a couple of chapters is turning to red text. It is set as Heading 2. I tried to deleted the heading and re-typing it. I tried to change the style to Body and back to Heading 2 but all references to it are turning to red text after I update the book. Any idea what is wrong and how do I fix it? I am using unstructured version. See image.

Apply a Character Format of Default ¶ Font. Then re-apply the desired Paragraph Format. If the red goes away, it was either a Character Format that had been applied or a local color override. If the red is still there ...
Look at the Special > Cross-Reference > Format > Definition itself. Look for any <character-format-name> and see if any of those have a red Color defined in their Format > Character > Designer. If so, remove that building block from the definition [Change] [Done] [Replace].

Similar Messages

What does it mean when i tunes symbol turns red after failing to update

Ipod 5th 16gb IOS 8.0.1
i was trying to update to IOS 8.0.2 and it failed and i had enough memory and full battery. it went into recovery mode and the i tunes symbol in the begging it turned red. it said that i need to restore it to get it out of recovery but when is try to restore it , it says i cant because its in recovery. i have tried holding the home button, turning of/on , and holding the home and power button till the apple comes out. please help

Turn of any firewall or antivirus software.

Why is it that when I text pictures, the recipient does not receive them. I've noticed that I have a camera roll which is where I choose pics from, but nothing in Photo Stream. Can someone please let me know what the issue might be? Thank you!

Why is it that when I text pictures, the recipient does not receive them. I've noticed that I have a camera roll which is where I choose pics from, but nothing in Photo Stream. Can someone please let me know what the issue might be? Thank you!

Some phones can only send and recieve SMS messages. If the recipients phone doesn't support MMS they won't be able to recieve a text with a photo.
To get your photos in Photo Stream, you'll need to setup iCloud. Check out this Apple article for more info -> iCloud: Photo Stream FAQ

My iPod 5th gen is not turning on after iOS 8 update!

My iPod 5th gen is not turning on after iOS 8 update! Before this all happened, I noticed that my apps crashed unexpectedly, it was laggy, and it decides to reset on its own at times. I CAN'T charge or plug it into my computer. Also, my home button is sunk in but my sleep/wake button at the top is most definitely not. I know my iPod was not running out of battery and I did not even power it off. I am very disappointed but I really need it to turn on =/

Try:
- iOS: Not responding or does not turn on
Ignore the reset and when it says place the iPod in recovery mode
Place the iPod in recovery mode using one of these programs:
For PC
RecBoot: Easy Way to Put iPhone into Recovery Mode
or
http://joshuabailey1997.wordpress.com/2010/09/02/recboot-v1-3/
If necessary:
Download QTMLClient.dll & iTunesMobileDevice.dll for RecBoot
and
RecBoot tip
RecBoot may have problems on 64X windows, then try:
Tenorshare ReiBoot – Enter & Exit iPhone, iPad, iPod Recovery Mode with a Single Click
For MAC or PC
The Firmware Umbrella - TinyUmbrella
Installs blootware on PC too
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try another cable
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar

HT201210 my phone will not turn on after trying to update now all it does is tells me to plug into itunes i have done this and still does not turn on

my phone wil not turn on after trying to update now all it de si tell me to plug into itunes which i have ready done and still nothing happens can you help

Try DFU Mode Restore. Open iTunes on computer. Connect iPhone to computer with USB cable. Hold both Home and Power button, after exactly 10 seconds release the Power Button, keep holding the Home button until iTunes recognizes iPhone in Recovery Mode, usually about 20 seconds time.

Icon turned red after update to 12.0.1.26

My iTunes icon on my desktop turned red after I updated to 12.0.1.26. Does that mean something is wrong with my iTunes? It has never been red before.

gaetano259 wrote:
My iTunes icon turned red as well after installation but when I tried to open it came back with an error say it was not installed correctly. Has anyone else had rhis problem?
As given, the red icon is by design.
For general advice see Troubleshooting issues with iTunes for Windows updates.
The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down the page in case one of them applies.
Your library should be unaffected by these steps but there is backup and recovery advice elsewhere in the user tip.
tt2

Why do I have two icons for iMovie '11 after downloading the update from the App Store? Previously I had iMovie '09.

Why do I have two icons for iMovie '11 after downloading the update from the App Store? Previously I had iMovie '09.

Do you see two versions of iMovie in your Application folder?
You can drag the icons out of the dock and then drag what you want back to the dock from the Application folder.
Matt

How do I preserve cross reference text when exporting to XML?

I am exporting my Framemaker documents to XML. However, when I open the raw XML, the reference formatting is obviously gone. So instead of seeing, say, see Figure 6. I now see, see .
Is there some way to preserve this on export?
Help would be much appreceated!

Josh,
The normal behavior is to have an empty element with the ID/IDRef markup that allows the xref element to be resolved again afterwards, by whatever post-processing step you put the XML through. The text of a cross-reference is a FrameMaker formatting artifact (not unlike a paragraph format, etc.) and is intentionally discarded during export. If you reimport the XML with the empty element, FM will re-resolve the xref, and then will restore the text using whatever format it originally had (the format name is also stored as markup).
If you want to preserve the element tag of the xref, I don't think there is any way to preserve the text, unless you write an import/export API client. You could possibly use an XSLT stylesheet to repopulate the text in some cases, but this seems like a process fraught with many complications.
If you do not care about the element tag, the manual says that you can just unwrap it, then you'll get the xref text. Here is a (rough) snip from the Structure Developers Guide:
Translating FrameMaker cross-reference elements to text in markup
You may not want your FrameMaker cross-reference elements to remain elements in the
markup representation—you can choose to translate them to text instead. To do so, use
this rule:
fm element "fmtag" unwrap;
where fmtag is the FrameMaker element tag for a cross-reference element.
All of this does beg the following question, though... why do you want to do this, especially if the text is referencing figure numbers, page numbers, etc. that have no relevance in the markup? Normally, it is expected that preservation of the markup is the essential thing, allowing the text to be regenerated later by whatever process uses the XML (perhaps including FM). If you drop the element tag, the actual link will be permanently lost.
Russ

Cross reference text anchor source in Word doc

I'm trying to figure out a way to automatically generate page numbers for a list of courses at the back of a course catalog. The listing is not arranged alphabetically or in the order the courses appear in the catalog, and (right now) the listing is a table. Because of this, I don't think a TOC or Index would work.
Cross references seem to work, but they're just as much work as turning pages, finding each entry, and typing it into the list. What I'd really like is to be able to use cross-references to text anchors, but have the anchors inserted in Word, before it goes into Indesign. Many of the courses repeat from one catalog to the next. The editor who creates the Word file does so by pasting each course with its description into one big Word file. If the text anchor were in each course to begin with, it would end up in Indesign and I would only have to reference it to generate a page number.
It seems that Word's Bookmarks come into Indesign as text anchors, but not with their original names. The first bookmark, regardless of its name in Word, comes in named "Anchor". The next one comes in named "Anchor 5" or something like that. I want them to come in with course numbers or some other unique identifier. "Anchor 5" doesn't really tell me anything.
Any ideas?
Ken Benson

Kenneth Benson wrote:
I'm trying to figure out a way to automatically generate page numbers for a list of courses at the back of a course catalog. The listing is not arranged alphabetically or in the order the courses appear in the catalog, and (right now) the listing is a table. Because of this, I don't think a TOC or Index would work.
Cross references seem to work, but they're just as much work as turning pages, finding each entry, and typing it into the list. What I'd really like is to be able to use cross-references to text anchors, but have the anchors inserted in Word, before it goes into Indesign. Many of the courses repeat from one catalog to the next. The editor who creates the Word file does so by pasting each course with its description into one big Word file. If the text anchor were in each course to begin with, it would end up in Indesign and I would only have to reference it to generate a page number.
It seems that Word's Bookmarks come into Indesign as text anchors, but not with their original names. The first bookmark, regardless of its name in Word, comes in named "Anchor". The next one comes in named "Anchor 5" or something like that. I want them to come in with course numbers or some other unique identifier. "Anchor 5" doesn't really tell me anything.
Any ideas?
Ken Benson
Hi, Ken:
IIRC, Word's cross-references are preserved in InDesign. Have you tried it?
HTH
Regards,
Peter
Peter Gold
KnowHow ProServices

Cross-References Text Dropped?

I'm having a problem with cross-references exporting to XML. I'm using Frame 8, and I have associated an element as a FrameMaker "cross-reference". I then go to insert that element and everything seems to work properly (no errors). But then, I open the XML and get something like the following: <l2item><para>Approval for Return to Service Procedures. See <refint refloc = "RSM0420" reftype = "Heading & Page"/>.</para></l2item> So, it drops the text of the link and replaces it with a "." and then also does not close out the tag "</refint>". Any ideas of what is going on? Thanks!

Hi Lynnca,
The text of a cross-reference is a property of the FrameMaker xref object that is expected to be autogenerated, so it is not included in the markup. The XML version of an xref is similar to the internal FrameMaker model, where you insert an xref an the text is automatically created and controlled internally. An xref saves as an empty element with information about how to find the source and regenerate the text, but no indication of what text was originally displaying when you exported the markup.
Properly configured, the xref text will autogenerate when you reimport to Frame, so the empty element is OK there. If you are using the XML with some non-Frame post-process, that process will need to accommodate this convention for representing xref links.
Note that the refint tag is actually closed, as indicated by the trailing slash just before the final angle bracket. This is a shortcut for representing elements with no content.
Russ

Why do my links get bigger and turn red?

Hi,
I have a website I created many years ago for my business. Along the way something weird happened to all the links. Whenever someone hovers over them with a mouse, the links turn red and get bigger. Can someone please tell me what caused this and how get fix my links so they're normal again?
My website address is: http://karathecomputertutor.com
You can see what happens by hovering over any link in the left navbar.
Thanks!
Kara

Here is how to fix it, but I am not sure of the colors. First thing is to remove th tags from the links. Then change the following corrected lines in your 3col_leftNav.css.
#sectionLinks a {
display: block;
font-size:100%;
border-top: 1px solid #cccccc;
padding: 2px 0px 2px 10px;
#sectionLinks a:hover{
display: block;
font-size:100%;
background-color: #dddddd;
text-align: left;
color: #369;
text-decoration:none;
Notice that in both the a and a:hover, there is a font size declaration. That way they always stay the same. Also, on the color of the a:hover, it is the same as the original, only the background changes. I am not sure that is what you want. This works on my computer as I have tested it here. Hopefully it will work on yours. This will change all the sectionLinks a and sectionLinks a:hover that uses that style sheet.
Jim

Windows 7PC no longer detects iPad 3 after latest itunes update. Why?, Windows 7PC no longer detects iPad 3 after latest itunes update. Why?

Windows 7PC no longer detects iPad 3 after latest itunes update. Why?,

iPad not appearing in iTunes
http://www.apple.com/support/ipad/assistant/itunes/
iOS: Device not recognized in iTunes for Mac OS X
http://support.apple.com/kb/TS1591
iOS: Device not recognized in iTunes for Windows
http://support.apple.com/kb/TS1538
iTunes for Windows: Device Sync Tests
http://support.apple.com/kb/HT4235
IOS: Syncing with iTunes
http://support.apple.com/kb/HT1386
Apple - Support - iPad - Syncing
http://www.apple.com/support/ipad/syncing/
 Cheers, Tom

Iphone 3gs does not turn on after ios 6 update

After the ios6 update, my iphone 3gs does not turn on. I see the apple logo, after a minute, it boots again and i see the logo again. This process seems to continue like a circle. After a search the net, i see that i am not the only one. A quick fix and suggestions please, as i need my phone of course.
Btw, Apple, i know that this is an old hardware and i will buy the new iphone 5 when it is available here in my country in December. But of course, you claşmed this update supports my 3gs, you should immediately find a fix
Regards..

Well, i don't see an another solution possible; you should try again and again to restore. Btw, my phone seemed to operate strange (even the stock mail app began to crash) so i tried hard reset (home button + sleep/wake button until seeing the apple logo). After that i found my phone again in dfu mode this night so began restoring again now.
It seems that apple didn't tested ios6 enough with the 3GS. I have a 32 GB phone so this will be near 60 gb download from the icloud over my broadband connection.

Apple TV won't turn off after 2.2 update

I was just wondering if anyone else has this problem after the new update.
After updating to the new 2.2 software......I am now unable to turn the device off. I used to just hold the center button down for 5-6 seconds and it would turn off. I didn't want to leave it on all the time since I only use it once or twice a week. But now.......doing the same thing has no effect on it at all. Is this happening to anyone else ? I know a lot of people just leave it on all the time, and I guess I could do that as well. Hahaha.......... seems I don't have any choice now. Is this a new feature that comes with the 2.2 software ?

Because of Genius and another feature, the ability to put the AppleTV into standby has changed. Either you can go to the main menu and press Play/Pause for 6 seconds (like you used to, but only works from main menu), or you can go into Settings where there is a new StandBy option that can be selected.

Why won't the game bubble witch saga load after it was updated

Why doesn't the game bubble witch saga load anymore after it was updated 2 days ago?

I haven't installed os8 yet. I was waiting until they got the bugs out. Should I install nos?[ Sent from Yahoo Mail for iPad | https://overview.mail.yahoo.com?.src=iOS]

Why is a single Cross Reference text turning red after doing an Update?

Similar Messages

Maybe you are looking for