Why is "Add Marker" dimmed?

I'm finally getting around to learning Garageband (I say "finally" because the whole reason I switched from PC to Mac was to use Garageband -- and that was a year and a half ago!) and I'm trying to 'mark' a spot on a track, but when I go to "Edit...Add Marker," that item is dimmed and I can't place the marker. What step am I missing?
Thanks,
--PS

Well, for starters, I'm not doing a podcast.
And the track that I am trying to mark is showing (or at least I think it is. I mean, I can see it on the screen... )
Next contestant?
Message was edited by: driver49

Similar Messages

  • How to add marker on the clip?

    Hi!!!
    Could you help me, how to add marker on the clip? Not on the sequence. I need the marker to moving as I moving clip in the sequence.
    Thanks!!!

    Ohhh... I just had to switch to the source monitor. OK. Just I don't use the source monitor usally. Only the program one. Thank you. It worked!
    Fri, 12 Oct 2012 05:02:08 -0600 от Jim Simon <[email protected]>:
    >     
    >
        Re: How to add marker on the clip?
        created by Jim Simon in Premiere Pro CS5, CS5.5, & CS6 - View the full discussion

  • HI! any idea why the add videos on apple site are not loading on my computer?

    HI! any idea why the add videos on apple site are not loading on my computer?

    You may have something as simple as a corrupt cache. Try resetting in Safe Mode and see if that fixes it. If not another thing to attempt is opening Disk Utility and Repairing Disk Permissions, do this action 2-3 times.

  • Premier Pro CC 2014 - Add Marker Suggestion

    Not sure your common uses on this Add Marker that is on the toolbar above the video editing pane but it would be nice to assign what marker you want by default.  I always use Add Chapter Marker mostly myself so it would be nice to be able to change what the Add Marker is instead of right clicking on the video preview window and selecting Add Chapter Marker.  It would save me 2 actions to get to the Add Chapter Marker by allowing me to specify what the Add Marker will be.
    Thanks,
    Kenneth

    Also...
    Add to right click menu of timelines an entry for "go to next keyframe" and "go to last keyframe" a la After Effects, we should also be able to assign a kb shortcut to this.
    There are buttons on either side of the create keyframe button to advance forward or backward in the effects control panel or timeline.
    You can also advance forward or backward in the effects control window by holding shift while dragging the playhead.
    Allow copy/paste of selection of audio/video effects, not just one at a time. Sure we can copy/paste attributes but since we can also copy/paste effects it would only make sense to allow to copy/paste a selection of effects.
    I guess I don't get this one. If I have 5 effects on a clip, I can simply command-click on the ones I want to copy over to the other clip.

  • What is the 'add marker' feature used for in iMovie 10?

    Can anyone tell me what the 'add marker' feature is used for in iMovie 10, I cant find any documentation on it anywhere, it doesnt even show under the help menu???

    ray sharpe wrote:
    Can anyone tell me what the 'add marker' feature is used for in iMovie 10, …
    hmm… well observed!
    In iMovie, markers are actually just… blue dots.
    In its bigger brother, FCPX, markers are…
    Markers overview
    Markers are reference points you can place within clips to locate, identify, annotate, and navigate to specific frames. In editing, markers are particularly useful for synchronizing two or more clips at a specific point. For example, you can use a marker to label the frame where a door slams and then snap a sound effect to that marker. You can use markers to flag a specific location in a clip with editing notes or other descriptive information. When you add chapter markers to specific points in your project, viewers can use the markers to quickly jump to those points in the movie after it’s been exported or burned to DVD or Blu-ray disc. You can also use markers for task management.
    Markers are classified as standard markers (blue), chapter markers (orange), to-do items (red), or completed to-do items (green).
    so, maybe, this indicates some forthcoming features in iMovie (wohooo, speculation!)?
    (iMovieX indicates some forthcoming features of next FCPX.1… but this is another story)
    There's one meaningful use, which comes to my mind:
    Edit to the beat:
    While your project is playing, you can 'tap' onto the M key…
    and not just 'per beat', but more like 'dancing', highlights, pauses, drama…
    In a second step, you can use the dots, to find the perfect point for edit.

  • Ps cs6 why copy command is dimmed - cannot copy obj?

    ps cs6 cc :
    why copy command is dimmed - cannot copy obj?

    lsepolis123 wrote:
    if press Ctrl+A selects all psd doc... either (when layer selected - in layers panel) in Move tool or in Select tool, well?
    While the marchimg ants shows the layer boundry what you write the whole document. Only the pixels of the targeted layer are selected.
    Here are two screen captures.
    I have two documents open in Photoshop. One has three layers ob top of the background layer One Red, One Green and one Blue.  Thes second one same size but only a white background layer.
    I target the green layer did a Ctrl+A to select the whole green layer note the marching ants outlining the whole document composite view. I followed the Ctrl+A with Ctrl+C (copy).
    I then switch to the second document just a white background layer and did a Ctrl+V past the bottom screen capture shows the results.  Only the green pixels were copied to the clipboard.

  • Why not add google chrome as a part of safari?

    Why not add google chrome as a part of safari?

    Since we are all just users here, you might want to direct your question to Apple via the attached link:
    http://www.apple.com/feedback/ipad.html

  • Why not add suport in nokia to add 2 sim card in t...

    why not add suport in nokia to add 2 sim card in the same mobile ?
    add support 2 network operation ?

    02-Dec-2008 02:54 PM
    korngear wrote:
    In the most part of SOUTH-EAST ASIA phones are SIM free, contact-deal-mess ups are not here. It is totally upto Nokia if they decides to unleash a phone with two SIM card slots FOR EXPERIMENT.
    True, but SE Asia is the only place they'd be able to sell the phone, and that is not a significant enough market sector to warrant the R&D, especially with the news that Nokia is pulling out of the Japanese handset market.
    In the rest of the world, a dual-SIM phone would only interest a fraction of 10% of potential users.
    Was this post helpful? If so, please click on the white "Kudos!" star below. Thank you!

  • Add marker in waveform graph

    Well guys, I have my graph, and my X-scale is 1sec
    I want to add 10 markers on that
    each marker in 100ms!
    How can I make that?
    I know how to add marker, but I have to add it with mouse... so don't help me with that
    since I need some precision!
    Thanks

    I'm not certain that I know what you're looking for, but this might contain something useful to you.  The first property sets the format of the X axis as you described and the second sets the one-second range you mentioned.  Perhaps you could post a picture of what you're trying to do?
    Jim
    You're entirely bonkers. But I'll tell you a secret. All the best people are. ~ Alice
    Attachments:
    wfvrm.vi ‏24 KB

  • I just started using my iphone 5s. I have a problem with new incoming emails from my POP account. Why are they marked as read automatically even though I have not even opened them yet.

    I just started using my iphone 5s. I have a problem with new incoming emails from my POP account. Why are they marked as read automatically even though I have not even opened them yet.
    At first I thought it might be because I was using simultaneously my old iPhone 4S so it somehow realized the emails where being pushed to another device and the it marked as read, this has nothing to do since I have deleted the email account from the iPhone 4S

    Contact the email provider for assistance with their service.

  • Why does label not dim when cluster is disabled?

    LabVIEW 7.0, Win 2k.
    I have attached a small VI which illustrates what I think is incorrect behavior.
    I put two instances of the same cluster typedef (strict or not - it doesn't matter) on a panel.
    I disconnected one instance, just to prove a point.
    If you disable and gray the clusters, the one which is still connected to its typedef will dim but its label will NOT.
    The one which has been disconnected properly dims the label too.
    Why?
    Can I work around it?
    Steve Bird
    Culverson Software - Elegant software that is a pleasure to use.
    Culverson.com
    Blog for (mostly LabVIEW) programmers: Tips And Tricks
    Attachments:
    LV7UIbug.llb ‏67 KB

    Yeah, I could re-process the dozens of files I have, to add this string into a cluster, but does it really have to be such a Son of Ugly Hack?
    If you're using the same cluster in several different places, you should look into making it a "type def" control. That way, if you need to make a change to the structure, all you have to do is open the type def control file, modify it and it and all the linked control get updated automatically.
    But if you didn't do that, TST's idea of just changing the color is probably the easiest. As long as you can figure out the roght color.
    Ed
    Ed Dickens - Certified LabVIEW Architect - DISTek Integration, Inc. - NI Certified Alliance Partner
    Using the Abort button to stop your VI is like using a tree to stop your car. It works, but there may be consequences.

  • Auto add marker to each clip?

    Is there an way to (easily) add a marker (preferably numbered) to the in-point of each clip in my timeline?

    PgDn - * - PgDn - * - PgDn - * etc.
    * on the numerical keypad. But why?

  • With the new i0s7 update I can't delete the mail in my inbox all at once.  I see there is the edit which allows you to mark all and to the right of that is MOVE and TRASH, why when you mark all you can't access these two options?

    In the new ios7 update, why can't you mark all your messages in the inbox all at once?  The EDIT tab lets you Mark All and off to the right is greyed out "move" and "trash", why can't you Select all and then press TRASH.  It only lets you mark them as Flag, or mark as read.  This *****!

    Hi Scottay777,
    Per pg 52 of the iOS7 User Manual, what you describe should be possible:
    Delete, move, or mark multiple messages. While viewing a list of messages, tap Edit. Select some messages or tap Mark All, then choose an action. If you make a mistake, shake iPhone immediately to undo.
    iPhone User Guide - For iOS 7 Software
    http://manuals.info.apple.com/MANUALS/1000/MA1565/en_US/iphone_user_guide.pdf
    If a button isn't responding correctly in Mail, you may want to try forcing it to close and then relaunch it. You may find the following article helpful:
    iOS: Force an app to close
    http://support.apple.com/kb/ht5137
    Regards,
    - Brenden

  • Why are trim marks not printing correctly in Acrobat 9?

    I just upgraded from Acrobat Pro 7 to Acrobat Pro 9. In 7 when I had a document with bleed I could indicate that I wanted trim marks and they would print and I could see where the page would be trimmed. In 9 no matter what I do it puts the trim marks on the media edge not the trim edge. To test this I printed the same document in Acrobat 7 and 9 and the marks were correct in 7 and not in 9.

    I updated my printer driver and now all is good. Still don't understand why the driver was good for Acrobat 7 and not Acrobat 9, but problem solved so I'm happy.

  • Add marker to Google Map

    Hi there.  I am creating an iPad app with In Design CS5.5. I want to add a link from an image with a button to a Google map showing where the image was taken. I can successfully add the map and load it but I cannot find out how to add the marker showing the exact location. I also want earth view to appear rather than street maps.  Hope somebody can help.  Many thanks in advance.  Ian Brodie

    Hi Ian
    Dont know if this will help, but this pages shows how to define a url to a specific point on a map, ie with postcodes etc
    Cheers
    Alistair
    https://developer.apple.com/library/ios/#featuredarticles/iPhoneURLScheme_Reference/Articl es/MapLinks.html%23//apple_ref/doc/uid/TP40007894-SW1

Maybe you are looking for