Why is Adobe 11.0.10 suddenly saying, "Cannot save to this file name"?

I've had no issues saving fillable PDFs that I've edited up until this week. I don't know what caused the change and I've tried researching the issue. Has anybody else experienced this and found a solution?

Thanks for your quick response! I'm saving to a network drive. I just tried
replicating the issue saving to the local drive and there was no error, but
typically I save on a network drive and it wasn't an issue previously.
On Thu, Dec 18, 2014 at 10:13 AM, Bernd Alheit <[email protected]>

Similar Messages

My biggest 'pain' at the moment is that every time I go to change then save a Photoshop CS3 file it says 'cannot save as the file as it has been left open or is in use by another application'

My biggest 'pain' at the moment is that every time I go to change then save a Photoshop CS3 file it says 'cannot save as the file as it has been left open or is in use by another application'

Rule Number One - NEVER go directly uinto the iPhoto library - there are no user servicable parts in it and making any change no matter how small can corrupt your library and cause data or photo loss
Exactly how were you trying to save a copy of your iPhoto library?
Albumdata.xml does not contain your photos - and again NEVER make any changes to the content of the iPhoto library - no dragging - no changes - never go into the library
We need to know exactly what you did
And probalby the easiest solution is to load your backup from before you messed things up
For reference after you get things working
Moving the iPhoto library is safe and simple - quit iPhoto and drag the iPhoto library intact as a single entity to the external drive - depress the option key and launch iPhoto using the "select library" option to point to the new location on the external drive - fully test it and then trash the old library on the internal drive (test one more time prior to emptying the trash)
And be sure that the External drive is formatted Mac OS extended (journaled) (iPhoto does not work with drives with other formats) and that it is always available prior to launching iPhoto
And backup soon and often - having your iPhoto library on an external drive is not a backup and if you are using Time Machine you need to check and be sure that TM is backing up your external drive
LN

Just upgraded to Mavericks. Now I cannot access scans from my hp scanner. After it complete the scans and I try to save as tiff, jpeg or pdf I get a either a grey blur or a message that says cannot save because the file cannot be written to.

Just upgraded to Mavericks. Now I cannot access scans from my hp scanner. After it complete the scans and I try to save as tiff, jpeg or pdf I get a either a grey blur or a message that says cannot save because the file cannot be written to. I did not have any problems before the upgrade. I would greatly appreciate any light shed on this.

Go to the HP site and look for drivers for your scanner. It apparently needs an updated driver to work with Mavericks.

Why does Adobe Elements 4.0 suddenly crash about the time Apple has a security update?

Why does Adobe Elements 4.0 suddenly start crashing about the time Apple has a security update?

An ADOBE FORUM "Community Professional" commented:
"Well, I'm not sure any of this is going to work, but go to your username>library>preferences and delete:
com.adobe.Photoshop.Elements.plist
The PSE 4 Paths and Settings folders (can't remember whether they're called Adobe Photoshop Elements 4.0 Paths or something different, but you want folders with Paths and Elements 4 in their names--you should be able to figure out which they are)
Opera preferences (if you have it)
Repair permissions and try again.
If it still quits, go to the PSE 4 folder in applications and delete the Adobe TWAIN driver from the plug-ins folder (note that you may have trouble with Epson scanners in PSE after doing this).
However, PSE 4 is pretty darned old and it's less compatible with every new OS X update, so what I've suggested may work and may not. FWIW, you probably will not be able to reinstall the program if you ever need to do so--installed versions of PSE 4 keep working in 10.6, but the installer does not."
Hope this helps

Getting the error "Adobe Send cannot currently send this file" how can I find out why?

Getting the error "Adobe Send cannot currently send this file" how can I find out why?

Hey James,
Please let me know what kind of file are you trying to send using 'Adobe Send' online service.
Does this happen with every file you try to send or any specific one?
Have you tried using a different browser? What happens? Check with your internet connection speed as well.
Hope to hear from you.
Regards,
Anubha

"Adobe Send cannot currently send this file." Why not?

I would like to send a group of 4 interrelated PDF files to an email address. I subscribed to Adobe Send. When I tried to send my files I got the message, "Adobe Send cannot currently send this file." Will I be able to use this service or should I simply cancel my subscription?

My first attempt had been from the Send box on the Adobe Reader screen. That had failed. Once I got properly registered into Adobe Send I was able to send the same group of files with no problem although I noticed that the embedded hyperlinks used to connect the files didn't work for the Send recipient. Hyperlinks are not a deal breaker as long as I can send the files as a group.

Problems with Adobe Flash Professional CC (CS6 too) to save animated .gif file or perfect .swf file

Hello,
I have a problem with Adobe Flash Professional CC and CS6 to save animated .gif file. Here is very simple work with logo. But I can't save a perfect file swf or gif and it's so bad news for me. Logo .swf file save with bugs. Bugs just see then file insert in freeshop page. Here is just example test page, it let you see logo bugs - http://tagraseshop.graphicsrim.eu . Here is real page, but it's not my, it's freeshop with old logo and I have corect it - http://www.tagras.lt
Animated .gif file absoluted not saved in Flash CC. Just gif picture. And why? My os Windows 8.1 . Indeed I try to save on Adobe Flash Professional CS6. It's not save too...
Gif "animated" - https://mega.co.nz/#!D8pEVaRR!Gjg-nI4T-0vROV9xCa1XfXz4br1X9lpQfUR0nQNT LK4
Swf with bugs - https://mega.co.nz/#!jo5lSRyS!1x6GjWqYsf7n4KknUs6eF8EqZXEv9e8RsSpGd8h5 jGQ
Fla - flash document - https://mega.co.nz/#!C94nCDSS!7yKF9FIBvYtVC9r8kYiJ0l0xzUm_R2HwgoXks6iM zUA
Perfect animation speed is here - http://e-shoptagras.graphicsrim.eu
Who can help to me?
Any ideas?
Thanks for your help in advance!

Thanks, but I use publish/export settings with GPU hardware acceleration and flash version 11.2 (and 11.8) but nothing happening.
And why gif file is not all transparenty then I insert on lightblue background? It can't export good quality? Also I use Photoshop, After Effects, Adobe Edge Animate. And nothing happening. Egde animate file .oam is not good for old website navigation. It can't be inserted in freeshop site from navigation... I use logo file .oam just for example here - http://e-shoptagras.graphicsrim.eu
In reality I want swf file, but we don't find why logo flickering? here http://tagraseshop.graphicsrim.eu
All file's are transparenty - https://mega.co.nz/#!f8B2CD5R!J8uCJt9Sdq4Suz4HLhTHz8bzJcSWXMBIKcKZgkD3z8c
I need help! Please!

Simply says "cannot install on this computer" when installing on my g4

help! i went through all the steps and just before installing, it says "cannot install on this computer" with no error code, no other buttons, and no way to resolve the problem. i'm installing on a g4. please help!

Hello,
You don't provide enough information to provide you with a definite answer. What are you trying to install? OS X, an update, a program, etc.?
If you are talking about an OS X 10.4.x update, then you should make sure that you are getting the PowerPC version and not the Intel version of that update.
If you are talking about installing OS X (or any other Mac OS), then you do need to be aware of the following:
The Mac will only install from Restore Disks / OS installation disks that meet one of the following criteria.
1) Original Retail boxed version of Mac OS that is of a later version than the computer originally shipped with.
2) Software Restore / Installation disks that originally came with that specific computer.
If you are using anything other than that, you will not be successful in getting the computer to boot from the installation disks and install the Mac OS.
If you purchased / obtained install disks from someone else, and they are not retail disks, then that could be the problem. The grey disks are an OEM disk, and are keyed to a specific computer. If they do not detect that computer when you try to install them, then it will not work.
These disks are usually labeled with machine name on them like eMac, iMac, etc.
Even if the machine you have is the same one printed on the label, it still will not likely work. Not only do they check to make sure it is the same type of computer, but they also check to see if it is the exact same revision and version that it shipped with.
If one thing is different, then they won't install.
And, as mentioned above, if you use retail installation disks, then you will need to make sure that they are of a version later than the version which came with the computer. Apple has a mechanism built-in to prevent installation of an OS that pre-dates the version which shipped on the computer.
Perhaps a bit of clarification is in order:
I don't know which version of the Mac OS came with the computer you are specifically working with, so let me just use OS 10.3.7 as an example.
So, assume that the computer originally shipped with OS 10.3.7 pre-installed from the factory.
Now, the computer (and the Mac OS) would prevent you from installing OS 10.3.6 or earlier on it. The reason for this is that the operating system needs to be aware of all the system's specific needs. It needs to know how it's power management system works, and so on.
Now for the tricky part, I mentioned that in regards to the retail boxed version that you would need to install a version later than the version which came with your computer originally. Now, that may sound funny, but here's why.
Let's suppose that OS 10.3.7 was already available before your computer was produced. And, let's suppose that a few unique customizations were necessary to make the current OS 10.3.7 run on the new machine. In that case, Apple may have released a custom "Build" of OS 10.3.7 that would run on the new system. So, in that case, the already available retail version of OS 10.3.7 may fail to work on that system. But, OS 10.3.8 would be aware of the needs of that machine since 10.3.8 would include the customizations provided in that special build of 10.3.7.
So, that is why I suggested going for a newer revision of the Mac OS when purchasing / using a retail boxed package. That way you can make sure it is aware of your system's specific needs.
I hope this helps.
Let us know if you have other questions.
P.S., if you'd like, go ahead and click the "Helpful" or "Solved" buttons on any of the posts / replies above if you feel they were helpful or adequately answered your question.

HT4847 I am unable to delete the last backup from icloud, i checked my all device setting but it still say "cannot delete icloud this time because it is in use,"Please tell me what should i do.

I am unable to delete the last backup from icloud, i checked my all device setting but it still say "cannot delete icloud this time because it is in use,"Please tell me what should i do

It still didn't work...
Within this commonfiles\apple folder, there is only one folder, labeled "Internet Services." Within this folder, there are 6 folders, labeled:
APLZOD.resources
BookmarkDAV_client.resources
CoreDAV.resources
iCloud.resources
iCloudServices.resources
ShellStreams.resources
Within all but CoreDAV and BookmarkDAV_client, there are multiple different folders, all labeled starting with a two letter (acronym I believe, for different languages) then .lproj (for example, a folder is labeled "ar.lproj".
In each of the folders of APLZOD.resources, there is a file labeled "APLZODlocalized.dll."
In all of the folders containing the multiple .lproj folders, there are likewise "name"localized.dll files contained.
In the BookmarkDAV_client and Core DAV folders, they each contain only one file, "Info.plist"
I attempted to delete all of these files, and still, the FileAssassin could not delete them. I unlocked one of them for instance, and I tried to delete the file myself (thru windows explorer and just clicking delete), and I still had the same issue of coming eventually to the window requesting me to "try again" to have permission.
What can I do?? I'd like to avoid Unlocker, but if it really is a reliable and SAFE program, and someone knows a SAFE place to download it from, I'd appreciate it very much so!!
thanks!!

HT4946 I cannot delete my old phone from the iCloud back up. It says "cannot delete backup" this back up cannot be deleted because it is in use

how do I delete my old phone from my icloud storage. when I try it says "cannot delete backup-This backup cannot be deleted becasue it is in use"
and my new one is listed but has 0KB (my old on has 4.5 and I cannot even back up because it says storage is full!!)

I have the same problem here and it wont let me do another back up or delete the old one.... Please help!!!! Anyone

Microsoft Office 2004 (Word) unable to save files I have been running Office 2004 on my Intel iMac with Snow Leopard for some time and all of a sudden I cannot save a document. Word just stopped responding and I have to force quit. I can open Word and cr

Microsoft Office 2004 (Word) unable to save files
I have been running Office 2004 on my Intel iMac with Snow Leopard for some time and all of a sudden I cannot save a document. Word just stopped responding and I have to force quit. I can open Word and create a new document but I cannot save it. I reinstalled Word but that didn’t help. Then went to the Internet and found at least one other Mac user having the same problem which it suggests is caused by a recent Mac Security Update:
http://answers.microsoft.com/en-us/mac/forum/macoffice2004-macword/word-2004-wil l-not-open-or-save-documents/b04eb870-9b0d-4f3b-bb47-b122301e36f6
So I check for a new Mac Security Update and sure enough there was one. I downloaded it and now Word seems to be working, as it should. I can both open and save files. The only problem remaining is that when I open Word I get the following error message “An unexpected error occurred while trying to load the Microsoft Framework library”. I contacted Apple but they were unable to help.
How can I get rid of this error message?

Look, I realize you might have to get your machine working, so this is how you revert back.
Restore proceedure to pre-Security Update 2012-001 v 1.0 & v 1.1
#1 Backup your personal data off the machine.
Backup files off the computer (not to TimeMachine). If you don't have a external drive, get one and connect to the USB/Firewire port and simply drag and drop copy your User folder to the external drive, it will copy all your files. It's best to have two backups of your data off the machine when trying to restore.
Disconnect all drives now to prevent any mistakes from occuring.
#2 Reinstall OS X 10.6 from disk
Get out your 10.6 install disk and make sure it's clean and polished (very soft cloth and a bit of rubbing alcohol, no scratches) If your disk is borked, you'll have to order a new one from Apple with your serial number.
Hold c boot off the 10.6 disk (wired keyboard, internal optical drive), use Disk Utility First Aid to >Repair Disk of your internal drive (do not format or erase!!), Quit DU and simply re-install 10.6.
Note: Simply reinstalling 10.6 version from disk (without erasing the drive) only replaces 10.6.8 with 10.6.x and bundled Apple programs, won't touch your files (backup anyway) or most programs, unless they installed a kext file into OS X itself. (only a few on average do this)
#3 Update to 10.6.8 without Security Update 2012-001 v1.0 or v1.1
Reboot and log in, update to 10.6.8 via Software Update, but EXCLUDE THE Security Update 2012-001 by checkinig the details and unchecking the blue check box.
#4 Reinstall any non-working third party programs
When you reboot, make sure to reinstall any programs that require kext files installed into OS X, you'll know, they won't work when you launch them or hang for some reason as they are missing the part they installed into OS X.
If for some freakish reason you get gray screen at any time when booting (possible it might occur when you reinstall older programs), hold the shift key down while booting (Safe Mode, disables kext files) and update your installed third party software so it's compatible with 10.6.8.
https://support.apple.com/kb/TS2570
That's it really.

My calendar will no longer let me add new event or delete them, it comes up with an error saying "cannot save event, no end date set" or "event does not belong to that event store". can anyone help with this?

my calendar will no longer let me add new event or delete them, it comes up with an error saying "cannot save event, no end date set" or "event does not belong to that event store". can anyone help with this?

Hi,
To configure your ODBC DataSource, go to Control Panel ---> DataSources(ODBC) (If you are in a Windows environment).
Select the tab System DSN. If you have not added your data source, then do so by clicking on the Add button. If you have added the datasource, click on the Configure button to configure it.
Give the datasource name, then the database name.
You have to give the hostname, service name and server name. I guess, in most cases, the datasource name and host name will be the same, service name and server name will be the same. If you are using TCP/IP, the protocol will be onsoctcp.
There will be a file named Services under C:\WINNT\system32\drivers\etc where you have to give the port number for accessing this server.
It will be like this <service name> <portnumber>/tcp
Hope this helps...
best wishes,
Nish

I created the XML file in Adobe Priemer Pro. Final Cut doesn't see this file. The file in the list not the active. Prompt please.

I created the XML file in Adobe Priemer Pro. Final Cut doesn't see this file. The file in the list not the active. Prompt please.

The XML format Premiere uses is not supported in FCPX. The only way I know of that may work is to go through FCP7 and then use 7toX to get to FCPX.

I updated my ipad to os 7 but after updates it asking me to put mu id but keep saying cannot unlock with this id

i updated my ipad to os 7 but after updates it asking me to put my id but keep saying cannot unlock with this id

This is Activation Lock. The iPad must be unlocked with the Apple ID used to originally set it up, or must first be removed from that accounts before you can activate it with your Apple ID. See here for information: http://support.apple.com/kb/PH13695

TS1814 i press restore and update then my ipad mini thr say cannot updated at this time because iPad software update server could not be contracted or is temporarily unavailable..how to solve it?

i press restore then my ipad mini thr say cannot updated at this time because iPad software update server could not be contracted or is temporarily unavailable..how to solve it?

Are you trying to restore via itunes or icloud? Which ever one you're doing, try the other.
Its most important to make sure itunes is updated, any security software is disabled, and to try another usb port/cord (if using itunes on a computer)
How to back up and restore (iCloud and iTunes)
http://support.apple.com/kb/HT1766
Unable to update or restore
http://support.apple.com/kb/HT1808?viewlocale=en_US
If all else fails, try another computer. (or network, if using icloud).

Why is Adobe 11.0.10 suddenly saying, "Cannot save to this file name"?

Similar Messages

Maybe you are looking for