Why is Adobe Bridge not showing the changes I had done on Camera Raw?

Dear all, I am trying out Adobe Bridge and discovered that after editing in Camera Raw (ACR), the changes was not shown on the thumbnail.
I am using photo (1), which is the top left corner photo, as my main and tried to apply changes to the remaining 5 photos.
I randomly changed the temperature to the mix and click "done".
You can see that (1) thumbnail did not change after my changes in ACR. Nevetheless, I then apply previous conversion to the remaining photos.
Neither (1) nor other photos have changes on the thumbnail.
Please note that when I check all the photos, inside ACR, I can see the changes (in temperature).
How may I make the thumbnail change show in Bridge after I edited in ACR? The purpose is that I hope that  from the look (without clicking), I know there is changes (e.g changes in temperature).
[Note: I do not own the photo(s)]
Thank you for your help.

Hi station_two, thank you for the very quick respond. I had found out the problem is my setting as followings:
My solution is as followings (after Develop setting> Previous conversion):
Once again, thank you very much.

Similar Messages

  • APERTURE: Small preview images do not show the changes.

    excuse my lousy english...
    Problem with Aperture:
    Small preview images do not show the changes.
    I use Aperture 3 since August 2010. By November and 10 projects later it ran normally.
    Since the project 11 are in the preview images shown (on the bottom bar in the shared representation) and in the pictures in the books no adjustments. I change for example a picture in b / w it remains in the small preview images bunt even though the great View Erbild s / w is. Even in the books then the famous picture colorful and even grobpixelig.
    This is of course in the processing of multiple images per project huntert pretty annoying to have no overview of processed images ...:-(
    I had a third installed for books and not as close a relationship.
    Does anyone have similar experience or know someone how can I fix this?
    Thanks for reading!
    Lokoe

    Lokoe,
    To make sure we understand:
    I change for example a picture in b / w it remains in the small preview images bunt even though the *great View Erbild s / w is*.
    I am not sure what "s/w" is, but I think you mean:
    "I change picture to black and white and the small preview images remain *in color* even though the *big picture in the Viewer* is in B/W."
    Even in the books then the famous picture colorful and even grobpixelig.
    "In the books the selected picture is colorful and even ???"
    "Grobpixelig" -> "grosspixelig" -> "Looks like big pixels???" Not quite sure of the translation. It's been 15 years since I spoke Deutsch!
    nathan

  • I re-downloaded my Photoshop recently and Adobe Bridge no longer displays my Nikon NEF files and Camera Raw will not open them.

    I re-downloaded my Photoshop recently and Adobe Bridge no longer displays my Nikon NEF files and Camera Raw will not open them.  I get a message saying that Camera Raw does not support my camera type but it always has in the past.  The bridge no longer shows the picture view of my NEF files.  These are Nikon NEF files from the Nikon 5100 DSLR camera.  How do I fix this?

    I re-downloaded my Photoshop recently and Adobe Bridge no longer displays my Nikon NEF files and Camera Raw will not open them.  I get a message saying that Camera Raw does not support my camera type but it always has in the past.
    When you re-installed Photoshop, you also re-installed the version of Camera Raw which shipped with Photoshop - in other words you reverted to an older version of Camera Raw which does not support the D5100.
    Camera Raw plug-in | Supported cameras
    The D5100 was first supported in Camera Raw version 6.4.
    In Photoshop, click Help > Updates to update Camera Raw.

  • Why this query does not show the result?

    Why the query with the schema prefixed does not show the result and the query without schema display the correct results?
    SQL> select data_object_id,object_type from dba_objects where object_name='HR'.'JOBS';
    select data_object_id,object_type from dba_objects where object_name='HR'.'JOBS'
    ERROR at line 1:
    ORA-00933: SQL command not properly ended
    SQL> select data_object_id,object_type from dba_objects where object_name='HR.JOBS';
    no rows selected
    SQL> select data_object_id, OWNER, object_type from dba_objects where object_name='JOBS';
    DATA_OBJECT_ID     OWNER                          OBJECT_TYPE
    69662              HR                                 TABLE
                       OE                                 SYNONYM
    SQL> SELECT USER FROM DUAL;
    USER
    SYS

    Hi,
    the column object_name refers to a object_name which is 'JOBS', the column owner refers to the owner 'HR', the value isn't stored together, so you have to select the two columns. It is the same behaviour as every other table/view. Have a look at the values in the view DBA_OBJECTS.
    Herald ten Dam
    Superconsult.nl

  • Adobe Bridge Not Showing Preview

    I have opened PS and launched Bridge but it doesn't show like it normally does.  I see Bridge icon in the tray
    across the bottom of my screen and have tried clicking, dbl clicking, control clicking and nothing happens.
    I've rebooted, undocked my laptop and rebooted, and still I can't see my CR files from my memory card
    in the normal preview window.  Is there a setting I need to change or is there something wrong?  Help!
    Thanks, Lisa

    I'm not clear on what you're seeing. Can you see Bridge on your screen? If yes, then you may need to reset your workspace:
    Window > Workspace > Reset Workspace.
    If your workspace is fine, maybe the issue is with file association. It's diffiicult to to say. Could you post a screenshot, please? [Use PrtScn, open Photoshop, Ctrl-N, then Ctrl-V]
    If the Bridge window is missing, you can try to maximise it by clicking the taskbar button for Bridge to bring it to the foreground, then press Alt - Space - X. Another method is to move an off-screen window using Alt - Space - M followed by the arrow keys, and Enter to save the new position.

  • Adobe Bridge not showing updated folders or files

    I created a couple of new folders on a network drive yesterday afternoon (via Windows 7 explorer) and popped in some photographs. Adobe Bridge doesn't show the new folders. I've searched everywhere under lots of different keywords but, while a few people seem to have experienced this, nobody seems to have listed a solution anywhere.
    I'd be very grateful for any advice.

    Check your permissions and clear the Bridge Cache.
    Mylenium

  • Web Template is not showing the changes done

    Dear Experts,
    I have done few changes in my web template like navigation pane has been added and the filter pane is removed from the template but still its showing the same filter pane, no error is being reported and for this i have closed the web application designer and again opened it but still no change what could be the issue.
    thanks and regards
    Neel

    Hi Neel,
    Is there any error message(s) while closing / re-opening the template?
    I am not sure about the configurations on your systems. In our environment, calling a template requires a connection to EP. While BI is having a communication problem with EP server, changes we made on template is not reflected.
    Hope this help!
    Heng Meng

  • Label object did not show the changed text.

    hi,
    I 've made change to the text on the label object on the form. Save it and Preview the form. However the form shows the old text of the label. But the text is changed in the design mode.
    I close the form and re-open again. the problem is still same.
    Does anyone come across this issue ?
    Thanks,

    Hi all 
    In administering this policy I am a little confused. 
    We have a policy that distributes proxy settings in the internet explorer maintenance settings section - however when opening this policy up in GPO editor the internet explorer maintenance section is not present.
    I plan to apply the settings via User/preferences/control panel settings/ internet settings (or registry settings from article) however I am unable to edit the settings for internet explorer maintenance and these will persist. Ideas????

  • Why does Element 11 not show the content of a map????????????+

    I spent almost more time wattching element updating all the time - than workin with it.
    But nevertheless it WILL NOT show more than half of the pictures in a new map. Pathfinder shoes 136 files in it - and elements show 52 of the.
    By God,  I am tired of this crap programme,

      Have some of these photos had GPS data added in external programs? Make sure all the photos have the places tag.

  • After loading, why does adobe flash not show up in add on manager - using firefox 5.0

    Loaded adobe flash 10.3.181.34 and it worked fine. However, it does not show up in Firefox add-on manager - using Firefox version 5.0. Running win xp pro sp-3

    shows up as shockwave not flash

  • Why org vaues is not updating the Changed Objects

    hi all,
    we have a master role with some some objects as maintained and some as changed  and some as standard.
    when i derived some 10 child roles and added org values. this org value is not pusing for the changed objects, even when i add it in the field, once if i make any other  modification in the master role and distribute it to child roles then all the org values for the changed objects are going to blank again
    so, org values wont push or work for changed objects?  please help
    thanks,
    SSS

    >
    sun wrote:
    > can you tell the difference between maintained and changed in PFCg
    >
    Hi Sun,
    Is it a coincidence that the objects having ORG level fields are in changed state in the master role or is it becasue of the SAP feature?
    When we directly maintain ORG fileds in objects and NOT in the specified ORG window, then
    first - > the object status goes to changed
    second -> when you create derived roles, that field will not be maintained in the derived role even though you maintain ORG values in derived roles. The value maintained in the master role is passed to the child role.
    What you need to do is follow what Jurjen said..... first ... fix the messed up master role, and then maintain the ORG values in the derived roles.
    Hope this helps
    Abhishek

  • Why in firefox4 does not show the envelope in task bar for webmail notifier? I cannot check my mail because cannot find the notifier envelope

    I just upgrade to Firefox 4, but why I cannot find the web mail notifier envelope in the task bar?

    Hello there, DianelCarter.
    From the sound of it, you're not seeing the banner at the top of the body of your email that has incorrectly been marked as junk. The following Knowledge Base article offers up some steps to try if you're not seeing those features:
    Mail (Mavericks): If junk mail filters aren’t working correctly
    http://support.apple.com/kb/PH14937
    Ultimately, if the basic steps don't help resolve your issue, you may want to reset the Junk Mail preferences to give the database a fresh start:
    If the problem persists, click Reset in Junk Mail preferences to reset the junk mail database to its original information. Resetting the database removes everything Mail has learned from you about what is junk or not junk, so you need to help Mail identify junk mail again.
    Thanks for reaching out to Apple Support Communities.
    Cheers,
    Pedro.

  • Why does Firefox SOMETIMES not show the AVG toolbar

    I have Firefox 14.0.1 and when I open it SOMETIMES the AVG toolbar is not there but sometimes it is. When it is not there the space for it to be in is there but nothing is in it. This happens often and I have to open another Firefox screen and go on doing so until one with the AVG toolbar appears

    Do you need the AVG toolbar? Some people have reported that it causes problems with Firefox.

  • Raw files for nikon d810 not showing a picture in preview. Have  camera raw plug in 8.6.0.250 . File will open in raw but no picture ahead of time.

    Raw files for Nikon D810 not showing a picture in preview for photoshop cs6 . Have camera raw plugin 8.6.0.250  File will open in ACR and process but no picture before opening raw file.

    Are you referencing Apple's Preview application or the Preview panel in Bridge?  Huge difference.
    Try purging the cache for the offending folder(s) through the Tools menu in Bridge.

  • Why will Adobe Reader10 Not open the PDF when I press the "Help" button in my software Sibelius?

    Hi There,
    I'm running windows 7 on my lap top (64 bit) and installed Adobe Reader 10. I use Sibelius software to write music. In the In the Sibelius Menu bar is a "Help" button. When you click on this the reference books (on PDF's) that are provided are suppose to open up. This is not hppening.
    When I go to the Adobe file and right click I see at the bottom "Properties" it is in this area that I believe I'm suppose to give Adobe Reader 10 permissions to open PDFs. I'm not sure though what exactly needs to happen.
    Who can help me!!!
    If you wish call me at 512-947-4931
    Thanks,
    David

    Initially we did not have full support for some large files -  we've recently changed this.  Please update Mix and try again.  We apologize for your inconvenience and thank you for your feedback.
    -Bryan

Maybe you are looking for