Why is airplay upload usage so high? (using wireless speaker)

I have a iHome wireless speaker that I play using iTunes Airplay. It works fine but the upload usage is through the roof compared to the download usage (e.g. upload = 128KB/s, download = 7KB/s) - this seems strange, thought it should be the other way around, what am I uploading?  I've turned off all my iCloud settings, am not sending data back to Apple in iTunes so not sure what's going on - anyone else got any clues or knows how to fix this, it's chewing up my bandwidth usage big time.

Actually I figured it out - if you use the Apple Time Capsule as your internet server that seems to cause the upload usage, when I connected the speaker directly to the modem it is back to normal usage. Just thought I'd post this for anyone else who's had this issue.

Similar Messages

  • Why is Flash CPU usage so high on my PC?

    To other psoters here - Please do not hijack my thread for any other performance issues with Flash other than high CPU usage.
    This thread is (hopefully) dedicated to why the CPU usage on my desktop PC jumps when I go to a page with flash 'content'. Thank you!
    I am hoping that there is an answer for why my computer is using a very high amount of CPU percentage when I am viewing flash content?
    I am running Windows Vista Home Premium Service Pack 2 on a Gateway GT5432 desktop computer.
    I have Shockwave Flash version 11.7.700.169 installed.
    I am using Firefox version 20.0.1 (but I have seen same problem of high CPU with Google chrome).
    Here is one page that is causing the high CPU usage.
    -   http://logansroadhouse.com/Default.aspx
    That page appears to have lots of Flash content.
    If I open that logans roadhouse page, my CPU usage goes from an average of 12%, to 80%!
    The process I see jump are:
    - Firefox's "plugin-container.exe" goes from 0% to about 50%
    - Firefox browser "firefox.exe" goes from around 8% to 14%
    - Adobe's plugin "FlashPlayerPlugin_11_7_700_169.exe" goes from 0% to 16%
    - TOTAL CPU change from 8% to 80% after opening up just this one page !
    When I close the page, the CPU usage goes down again. Open again - CPU goes high again.
    Also if I go to the firefox addons page and DISABLE the SHOCKWAVE FLASH plugin, then go to that Logans Roadhouse page, very little of the content I saw with Flash enabled is visible - which I take to mean it is a page consisting of lots of Flash 'content'. Also the CPU usage remains low (8%) if I go to that page - after disabling the Shockwave Flash plugin.
    I have seen the CPU also go high on youtube.com pages also - CPU jumps just as I said above - if Flash is enabled. CPU then drops after disabling Flash plugin.
    I was hoping you had a fix for my problem? My PC becomes almost unusable with the CPU so high. It sure looks like it is the Flash plugin driving the CPU so high.

    I am also facing the same problem from last 2-3 weeks since i upgraded my flash player to latest one.
    All softwares and drivers are upto-date.
    I play wartune MMO flash browser based game (also applicable to youtube videos)  which is now using above 80% of CPU. Before upgrading, CPU usage was normal around 5-15% depending upon the events, but not more than 20% even if i open 3-4 accounts of wartune in different windows at the same time. It happens in all browsers (IE10, Mozila22.00, Opera12.15, Chrome27.0.1453.116 m).
    I tried all solutions like disabling  hardware acceleration, flash cache size to unlimited, clearing all flash cache etc but the same problem.
    Please fix this problem as soon as possible.
    My System Specs as follows
    System 
    Manufacturer
    System manufacturer
    Model
    System Product Name
    Total amount of system memory
    4.00 GB RAM
    System type
    64-bit operating system
    Number of processor cores
    2
    Storage 
    Total size of hard disk(s)
    307 GB
    Disk partition (C:)
    18 GB Free (40 GB Total)
    Disk partition (D:)
    28 GB Free (34 GB Total)
    Disk partition (E:)
    11 GB Free (58 GB Total)
    Disk partition (F:)
    4 GB Free (58 GB Total)
    Disk partition (G:)
    6 GB Free (116 GB Total)
    Graphics 
    Display adapter type
    Intel(R) G41 Express Chipset
    Total available graphics memory
    1759 MB
          Dedicated graphics memory
    128 MB
          Dedicated system memory
    0 MB
          Shared system memory
    1631 MB
    Display adapter driver version
    8.15.10.2869
    Primary monitor resolution
    1440x900
    DirectX version
    DirectX 10
    Network 
    Network Adapter
    Realtek RTL8168D/8111D Family PCI-E Gigabit Ethernet NIC (NDIS 6.20)
    OS Name
    Microsoft Windows 7 Ultimate
    Version
    6.1.7601 Service Pack 1 Build 7601
    Other OS Description
    Not Available
    OS Manufacturer
    Microsoft Corporation
    System Name
    Y2K-PC
    System Manufacturer
    System manufacturer
    System Model
    System Product Name
    System Type
    x64-based PC
    Processor
    Intel(R) Core(TM)2 Duo CPU
    E4500  @ 2.20GHz, 2203 Mhz, 2 Core(s), 2 Logical Processor(s)
    BIOS Version/Date
    American Megatrends Inc. 0702, 17-01-2011
    SMBIOS Version
    2.5
    Windows Directory
    C:\Windows
    System Directory
    C:\Windows\system32
    Boot Device
    \Device\HarddiskVolume1
    Locale
    India
    Hardware Abstraction Layer
    Version = "6.1.7601.17514"
    User Name
    y2k-PC\y2k
    Time Zone
    India Standard Time
    Installed Physical Memory (RAM)
    4.00 GB
    Total Physical Memory
    3.75 GB
    Available Physical Memory
    2.07 GB
    Total Virtual Memory
    7.49 GB
    Available Virtual Memory
    5.80 GB
    Page File Space
    3.75 GB
    Page File
    C:\pagefile.sys
    Name
    Intel(R) G41 Express Chipset
    PNP Device ID
    PCI\VEN_8086&DEV_2E32&SUBSYS_836D1043&REV_03\3&11583659&0&10
    Adapter Type
    Intel(R) 4 Series Express Chipset Family, Intel Corporation compatible
    Adapter Description
    Intel(R) G41 Express Chipset
    Adapter RAM
    1.75 GB (1,877,536,768 bytes)
    Installed Drivers
    igdumd64.dll,igd10umd64.dll,igdumdx32,igd10umd32
    Driver Version
    8.15.10.2869
    INF File
    oem6.inf (iEGL0 section)
    Color Planes
    Not Available
    Color Table Entries
    4294967296
    Resolution
    1440 x 900 x 59 hertz
    Bits/Pixel
    32
    Memory Address
    0xFE400000-0xFE7FFFFF
    Memory Address
    0xE0000000-0xEFFFFFFF
    I/O Port
    0x0000DC00-0x0000DC07
    IRQ Channel
    IRQ 4294967294
    I/O Port
    0x000003B0-0x000003BB
    I/O Port
    0x000003C0-0x000003DF
    Memory Address
    0xA0000-0xBFFFF
    Driver
    c:\windows\system32\drivers\igdkmd64.sys (8.15.10.2869, 10.14 MB (10,629,408 bytes), 14-11-2012 16:57)

  • Why is my data usage so high?

    Using Verizon's data calculator, 5G should me more than sufficient for the limited PC usage.  In one week, the data usage information indicates we have used over half in one week.  There are several entries in the breakdown for small amounts during the midnight hours, when computers are not in use and shut down. 
    I am very disappointed with the information provided before this plan was purchased, based on what we expected for our data needs.  By increasing the data amount our bill will increase 30.00  There are many sources that indicate 2G should be ample for each of us in the household (2).  So, I am not sure the calculations are correct that are being tracked with the Jetpack system.  Here is the data calculator, I entered more than twice the expected usage for the two laptops combined.  We download no music, videos, movies.  Simply check email and browse the web.  How do you explain this?
    Total
    3 GB/mo
    (3157 MB/mo)
    Mobile
    Broadband
    4G
    3 GB/mo
    5/21/2014 Data Calculator - Verizon Wireless

    The VZW Data Calculator is a tool designed to help estimate and visualize data usage.  Most folks have no idea what data is or how it is consumed on their devices.  The data calculator tool is not accurate on any front other than to give you a general idea how much data a particular function consumes under normal circumstances.
    VZW provides its users with a limited data usage report that does not break down individual application or device usage into meaningful results.  What you get instead is a power bill like summary of your usage in terms of how much was used at certain times of the day.  After all VZW is not in the computer support business, they provide you with the pipe and users determine how best to consume the data.  A leaky hose or application is not the responsibility of VZW to discover and correct.
    When it comes to the actual usage of your VZW device there isn't a whole lot out there that can show you how you are consuming your data plan.  Some monitor applications and devices can be setup ahead of time, but all they are good for is reviewing the data that flows through them.  Special care must be taken when designing and setting up monitors to make sure you capture everything.  Monitors are generally not user friendly to setup or understand and often require detailed readings of numerous logs to determine where problems are, if the monitor can even capture them at all.
    The current best practices for data usage are as follows:
    1. Power down your VZW device when it is not being used
    2. Secure your VZW device with a custom SSID, WiFi and Admin password
    - This should be in compliance with security best practices for strong passwords
    - A good site to reference is https://howsecureismypassword.net/
    3. Take care to disable and shutdown any automatic updates on your devices
    4. Be cautious to view and download audio/video content on low resolution
    In most cases high data usage is not an intentional doing on the users behalf.  It is the background applications and services installed on the connected devices that run rampant and chew up your data plan without your knowledge or consent.

  • Why is iTunes memory usage so high?

    As the title states iTunes is using a riduclous amount of memory of my computer 150MB and continually rising until it freezes and then crashes. This is such a useless program and such a memory hog. Any ideas on how to reduce the stupid amount of RAM this program uses?

    Close your iTunes,
    Go to command Prompt -
    (Win 7/Vista) - START/ALL PROGRAMS/ACCESSORIES, right mouse click "Command Prompt", choose "Run as Administrator".
    (Win XP SP2 & above) - START/ALL PROGRAMS/ACCESSORIES/Command Prompt
    In the "Command Prompt" screen, type in
    netsh winsock reset
    Hit "ENTER" key
    Restart your computer.
    Now launch your iTunes and see if it is working now.

  • Why is my memory usage so high?

    This memory usage really shouldn't be okay, from having Chrome, Activity Monitor, Steam, and Skype running. I'm pretty sure the problem isn't that I don't have enough RAM. Does anything here look like is easily fixable?

    Does anything here look like is easily fixable?
    Nothing there looks like it needs to be fixed. Your memory usage is normal.

  • Why does the video stop and start using airplay on Mountain Lion?

    Why does the picture stop and start using airplay on Mountain Lion? I'm playing a film from a website and uising airplay to iTV. The sound is fine, but the picture stops and starts. Any ideas?

    Why does the picture stop and start using airplay on Mountain Lion? I'm playing a film from a website and uising airplay to iTV. The sound is fine, but the picture stops and starts. Any ideas?

  • Why photos already uploaded to Ipad are erased when I sync other photos using Itunes ?

    Why previous photos uploaded to Ipad (retina) are erased when I sync it through Itunes to upload additional photos ?

    To keep the photos previously loaded when you previously synced you have to continue to select them when syncing additional photos. If you don't they will be deleted.

  • Why no Airplay for iPhone 3G w iOS 4.2.1?

    I'd like to understand the technical reason that Airplay is not available from an iPhone 3G with iOS 4.2.1. I understand that the button for Airplay is located in the multitasking tray, and supposedly the iPhone 3G is too slow for multitasking - please don't post a simplistic response like that.
    I want to know (a) why the Airplay button is considered a multitasking feature, (b) whether there was ANY way Apply COULD have allowed the iPhone 3G to use Airplay but decided to blow us 3G users off instead.
    I wish Apple could just be honest about this kind of thing. I had to find this info buried in support. This should have been a prominent part of the iOS 4.2.1 announcement, that the 3G wasn't getting Airplay, and that Apple would just rather stop making new software for the 3G altogether if all us stupid users would just upgrade already.

    I don't know.. but I guess they tried it and found it slowed things down? And that'll be a lesson from a couple of OS updates ago they'll be keen not to repeat!
    While it doesn't feel like multitasking, you're already running whichever App you want to print something, and then calling on AirPrint to do its thing. Given how resource-hungry desktop printer software can be, I can see why it's pushing it on a phone.. however cool

  • Facing problem during uploadation of Routing data using CA01-BDC - URGENT

    Dear All,
    When I am trying to upload Routing data using CA01 in the Table Control scenario, then I am facing problem as my last 2 records are not getting uploaded from my Test file.
    For example, I am having 47 records in my Test File and after setting ‘Default size’ parameters (to avoid screen resolution problem)
    I have 15 table control line items data per page. The Page down logic ('=P+') is working fine, but my below BDC code failed to take
    the remainder last 2 records from the Test File.
    Analysis: When I am running my “Call Transaction” bdc in foreground, then the 1st page down occurs after 15th record, 2nd page down occurs after 29th record( as in Table Control 1st page’s 15th record is coming on the Top of 2nd page). 3rd page down occurs after 43rd record
    (as 2nd page’s 29th record is coming on the top of 3rd page). In the 4th Table Control Page 43rd record of previous page is coming on top, and then it’s taking 44th & 45th records from the Test File and then it is triggering SAVE (=BU). Thus, our last 2 records
    (i.e. 46th, 47th record) are not getting uploaded in the routing screen from our Test File.
    If anybody has encountered this scenario previously, please help me URGENTLY in fixing the bugs here. It’s VERY, VERY URGENT…
    FYI. For others 45 successful records already uploaded, all the screen fields values are coming properly in the routing screen, and here there is no issue.
    Thanks very much…
    Thanks & Regards
    Sudipta – Project Lead
    Volvo Client Location
    I am pasting my BDC source code below:
    REPORT ZRT1_UPLOAD_CA01_F
                           NO STANDARD PAGE HEADING
                           LINE-SIZE 255.
                            I N C L U D E S                              *
    Include for Data Declarations
    INCLUDE zrout_top.
    Include for Forms
    INCLUDE zrout_form.
    INCLUDE zrout_include_f_ca01.
    *AT SELECTION-SCREEN ON VALUE-REQUEST FOR <field>
    AT SELECTION-SCREEN ON VALUE-REQUEST FOR P_FILE.
    Attaching F4 help with filename
      PERFORM F1001_GET_F4.
               S T A R T   -   O F  -  S E L E C T I O N                 *
    START-OF-SELECTION.
    Perform to read the input file
      PERFORM f_read_file.
    Perform to fill the BDC data
      PERFORM f_fill_bdctab.
                   E N D   -   O F  -  S E L E C T I O N                 *
    END-OF-SELECTION.
      FREE: i_bdcdata,
            i_messtab,
            i_record.
    x----
    *&  Include           ZROUT_TOP                                        *
                      D A T A B A S E    T A B L E S                     *
    TABLES: t100.          "Messages
                    D A T A    D E C L A R A T I O N S                   *
    T A B L E    T Y P E S *****************************
    For input data
    TYPES: BEGIN OF ty_record,
            matnr(18),  "Material Number
            werks(4),   "Plant
            verwe(3),   "Usage
            statu(3),   "Status
            arbpl(8),   "Work Center
            steus(4),   "Control Key
            ltxa1(40),  "Description of Operation
            bmsch(13),  "Base Quantity
            meinh(3),   "Unit of Measure
            vgw01(11),  "Machine
            vge01(3),   "Unit of measure of activity
          END OF ty_record.
    I N T E R N A L    T A B L E S ***********************
    Internal Table for input file name
    DATA: i_file_tab  TYPE STANDARD TABLE OF sdokpath   INITIAL SIZE 0.
    Internal Table for BDC Data
    DATA: i_bdcdata   TYPE STANDARD TABLE OF bdcdata    INITIAL SIZE 0.
    Internal Table for BDC Messages
    DATA: i_messtab   TYPE STANDARD TABLE OF bdcmsgcoll INITIAL SIZE 0.
    Internal Table for Input file
    DATA: i_record TYPE STANDARD TABLE OF ty_record INITIAL SIZE 0.
    W O R K      A R E A S *************************
    Work Area for input file name
    DATA: wa_file_tab LIKE sdokpath.
    Work Area for BDC Data
    DATA: wa_bdcdata LIKE bdcdata.
    Work Area for BDC Messages
    DATA: wa_messtab LIKE bdcmsgcoll.
    Work Area for Input file
    DATA: wa_record TYPE ty_record.
    V A R I A B L E S ****************************
    DATA: v_filename TYPE string,
          v_fnam(40) TYPE c.
    DATA: wa_opt TYPE ctu_params.
    C O N S T A N T S ***************************
    CONSTANTS: c_werks TYPE rc27m-werks VALUE 'tp',
               c_steus TYPE plpod-steus VALUE 'PP01'.
    *Selection Screen.
    SELECTION-SCREEN BEGIN OF BLOCK B1 WITH FRAME TITLE TEXT-001.
    PARAMETERS:
              Input file name
                P_FILE TYPE rlgrap-filename OBLIGATORY. " DEFAULT 'C:\'.
    SELECTION-SCREEN END OF BLOCK B1.
    x----
    *&  Include           ZROUT_FORM                                       *
    *&      Form  f_fill_bdctab
          Form to fill the BDC Data
    FORM f_fill_bdctab.
      TABLES mapl.          "Assignment of Task Lists to Materials
      DATA: l_cnt_item(3)  TYPE n VALUE 1.    "Line item counter
      DATA: first(3)  TYPE n VALUE 16.    "Line item counter
      DATA: next(3)  TYPE n .    "Line item counter
      DATA: lin(3) TYPE n .    "Line item counter
      DATA: l_v_bmsch(13),   "Base qty
            l_v_meinh(3),    "Unit of Measure
            l_v_vgw01(11),   "Machine
            l_v_vgw02(11),   "Labour
            l_v_vge01(3).    "Unit of measure of activity
      DATA l_v_nextline TYPE sy-tabix.
      DATA wa_temp TYPE ty_record.
        Initialize Counter
          l_cnt_item = 1.
      SORT i_record BY matnr.
      LOOP AT i_record INTO wa_record.
    AT NEW matnr.
        REFRESH: i_bdcdata,
                 i_messtab.
        SET PARAMETER ID 'PLN' FIELD space.
        SET PARAMETER ID 'PAL' FIELD space.
        PERFORM f_bdc_dynpro      USING 'SAPLCPDI' '1010'.
        PERFORM f_bdc_field       USING 'BDC_OKCODE'
                                        '/00'.
      Material Number
        PERFORM f_bdc_field       USING 'RC27M-MATNR'
                                        wa_record-matnr.
       Plant
        PERFORM f_bdc_field       USING 'RC27M-WERKS'
                                        c_werks.
        PERFORM f_bdc_field       USING 'RC271-PLNNR'
      Check if routing already exits for the material
        SELECT * FROM mapl
                      INTO mapl
                                WHERE matnr EQ wa_record-matnr
                                  AND werks EQ c_werks
                                  AND plnty EQ 'N'.
          IF sy-subrc EQ 0.
            PERFORM f_bdc_dynpro      USING 'SAPLCPDI' '1200'.
            PERFORM f_bdc_field       USING 'BDC_OKCODE'
                                            '=ANLG  '.
          ENDIF.
        ENDSELECT.
        perform f_bdc_dynpro      USING 'SAPLCPDA' '1200'.
        perform f_bdc_field       USING 'BDC_OKCODE'
                                  '=VOUE'.
    Group Counter
        perform f_bdc_field       USING 'PLKOD-PLNAL'
      Usage
        PERFORM f_bdc_field       USING 'PLKOD-VERWE'
                                        '1'.
      Status
        PERFORM f_bdc_field       USING 'PLKOD-STATU'
                                        '4'.
    ENDAT.
        PERFORM f_bdc_dynpro      USING 'SAPLCPDI' '1400'.
      Check if page is full
        IF l_cnt_item EQ '16'.
        Page down
          PERFORM f_bdc_field       USING 'BDC_OKCODE'
                                               '=P+'.
          l_cnt_item = 1.
    ELSE.
    PERFORM f_bdc_field       USING 'BDC_OKCODE'
                                  '/00'.
    ENDIF.
       CLEAR v_fnam.
      Populate item level details
    Work Center
        CONCATENATE 'PLPOD-ARBPL(' l_cnt_item ')' INTO v_fnam.
        PERFORM f_bdc_field       USING v_fnam
                                        wa_record-arbpl.
      Control Key
        CONCATENATE 'PLPOD-STEUS(' l_cnt_item ')' INTO v_fnam.
        PERFORM f_bdc_field       USING v_fnam
                                        c_steus.
      Description of Operation
        CONCATENATE 'PLPOD-LTXA1(' l_cnt_item ')' INTO v_fnam.
        PERFORM f_bdc_field       USING v_fnam
                                        wa_record-ltxa1.
      Base Quantity
        CONCATENATE 'PLPOD-BMSCH(' l_cnt_item ')' INTO v_fnam.
        PERFORM f_bdc_field       USING v_fnam
                                        wa_record-bmsch.
      Unit of Measure
        CONCATENATE 'PLPOD-MEINH(' l_cnt_item ')' INTO v_fnam.
        PERFORM f_bdc_field       USING v_fnam
                                        wa_record-meinh.
      Machine
        CONCATENATE 'PLPOD-VGW01(' l_cnt_item ')' INTO v_fnam.
        PERFORM f_bdc_field       USING v_fnam
                                        wa_record-vgw01.
      Labour
       CONCATENATE 'PLPOD-VGW02(' l_cnt_item ')' INTO v_fnam.
       PERFORM f_bdc_field       USING v_fnam
                                       wa_record-vgw02.
      Unit of measure of activity
        CONCATENATE 'PLPOD-VGE01(' l_cnt_item ')' INTO v_fnam.
        PERFORM f_bdc_field       USING v_fnam
                                        wa_record-vge01.
          l_cnt_item = l_cnt_item + 1.
       CLEAR wa_record.
    AT END OF matnr.
         PERFORM f_bdc_field       USING 'BDC_OKCODE'
                                  '/00'.
          PERFORM f_bdc_field         USING 'BDC_OKCODE'
                                  '=BU'.
         wa_opt-DISMODE = 'A'.
         wa_opt-DEFSIZE = 'X'.
         wa_opt-UPDMODE = 'S'.
        PERFORM f_bdc_transaction USING 'CA01'.
       Initialize Counter
         l_cnt_item = 1.
    ENDAT.
      ENDLOOP.
    ENDFORM.                    " f_fill_bdctab
    x----
    *&  Include           ZROUT_INCLUDE_F_CA01                             *
    *&      Form  f_read_file
          Form to read the file from presentation server
    FORM f_read_file .
    To get the file name
      DATA l_v_file TYPE string.
    l_v_file = P_FILE.
    CALL FUNCTION 'GUI_UPLOAD'
          EXPORTING
            filename                = l_v_file
            filetype                = 'ASC'
            has_field_separator     = 'X'
          TABLES
            data_tab                = i_record
          EXCEPTIONS
            file_open_error         = 1
            file_read_error         = 2
            no_batch                = 3
            gui_refuse_filetransfer = 4
            invalid_type            = 5
            no_authority            = 6
            unknown_error           = 7
            bad_data_format         = 8
            header_not_allowed      = 9
            separator_not_allowed   = 10
            header_too_long         = 11
            unknown_dp_error        = 12
            access_denied           = 13
            dp_out_of_memory        = 14
            disk_full               = 15
            dp_timeout              = 16
            OTHERS                  = 17.
        IF sy-subrc <> 0.
          MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
                  WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
        ENDIF.
    ENDIF.
    ENDFORM.                    " f_read_file
    *&      Form  f_bdc_dynpro
          Form to populate BDC Tab for new screen
         -->fp_program   Screen program name
         -->fp_dynpro    Screen Number
           Start new screen                                              *
    FORM f_bdc_dynpro USING fp_program fp_dynpro.
      CLEAR wa_bdcdata.
      wa_bdcdata-program  = fp_program.
      wa_bdcdata-dynpro   = fp_dynpro.
      wa_bdcdata-dynbegin = 'X'.
      APPEND wa_bdcdata TO i_bdcdata.
    ENDFORM.                    "f_bdc_dynpro
    *&      Form  f_bdc_field
           Insert field                                                  *
    FORM f_bdc_field USING fp_fnam fp_fval.
      IF NOT fp_fval IS INITIAL.
        CLEAR wa_bdcdata.
        wa_bdcdata-fnam = fp_fnam.
        wa_bdcdata-fval = fp_fval.
        APPEND wa_bdcdata TO i_bdcdata.
      ENDIF.
    ENDFORM.                    "f_bdc_field
    *&      Form  f_bdc_transaction
          Call transaction and error handling
         -->fp_tcode   Transaction code
    FORM f_bdc_transaction  USING fp_tcode.
      DATA: l_mstring(480),
            l_color         TYPE i,
            l_mode          TYPE c.
      REFRESH i_messtab.
    CALL TRANSACTION fp_tcode USING i_bdcdata
                       OPTIONS FROM wa_opt
                       MESSAGES INTO i_messtab.
    Messages during upload
      LOOP AT i_messtab INTO wa_messtab.
        CASE wa_messtab-msgtyp.
          WHEN 'S'.
            l_color = 5.
          WHEN 'E'.
            l_color = 6.
          WHEN 'W'.
            l_color = 3.
        ENDCASE.
        FORMAT COLOR = l_color.
        SELECT SINGLE * FROM t100 WHERE sprsl = wa_messtab-msgspra
                                  AND   arbgb = wa_messtab-msgid
                                  AND   msgnr = wa_messtab-msgnr.
        IF sy-subrc = 0.
          l_mstring = t100-text.
          IF l_mstring CS '&1'.
            REPLACE '&1' WITH wa_messtab-msgv1 INTO l_mstring.
            REPLACE '&2' WITH wa_messtab-msgv2 INTO l_mstring.
            REPLACE '&3' WITH wa_messtab-msgv3 INTO l_mstring.
            REPLACE '&4' WITH wa_messtab-msgv4 INTO l_mstring.
          ELSE.
            REPLACE '&' WITH wa_messtab-msgv1 INTO l_mstring.
            REPLACE '&' WITH wa_messtab-msgv2 INTO l_mstring.
            REPLACE '&' WITH wa_messtab-msgv3 INTO l_mstring.
            REPLACE '&' WITH wa_messtab-msgv4 INTO l_mstring.
          ENDIF.
          CONDENSE l_mstring.
          WRITE: / wa_messtab-msgtyp, l_mstring(250).
        ELSE.
          WRITE: / wa_messtab.
        ENDIF.
        FORMAT COLOR OFF.
      ENDLOOP.
      SKIP.
    ENDFORM.                    " f_bdc_transaction
    FORM F1001_GET_F4.
      CALL FUNCTION 'KD_GET_FILENAME_ON_F4'
           EXPORTING
                PROGRAM_NAME  = SY-REPID
                DYNPRO_NUMBER = SY-DYNNR
                FIELD_NAME    = P_FILE
           CHANGING
                FILE_NAME     = P_FILE
           EXCEPTIONS
                MASK_TOO_LONG = 1
                OTHERS        = 2.
      IF SY-SUBRC <> 0.
      File is not selected
       MESSAGE I000 WITH TEXT-M01.
      ENDIF.
    ENDFORM.                    " F1001_GET_F4

    Sudipta,
    Would request you to post this to ABAP-Forum for Immediate response.
    I had this problem, but the ABAP guy did something to correct this...it was more of screen resoultion difference between the recorded system and uploading system. Please try to use the same system which was used to record and try.
    Regards,
    Prasobh

  • Problem with uploading data from excel using BDC for tcode f-02

    Hi All,
    I am uploading data from excel using BDC for tcode f-02. The problem here is, while recording, the values of some fields are recording twice. I dont know why it's happening so. But if I run my abap program, I have to give those fields twice in my excel sheet. Otherwise data does not upload. But it is not the feasible way. We must give those fields once in excel. Please tell me, how I can solve the issue.
    With regards,
    Rosaline.

    Hi,
      in BDC each and every action is recording. If your press enter in same screen that also recorded once aging may be this is your case repeating field values will appear. we can solve the problem for repeat fields like below.
    suppose in your excel having repeated field X1 X2 X3 the X2 contains repeated field X3 means delete the X3 field.
    Now In your itab having X1 and X2 fields. While in the LOOP the ITAB pass the X2 field to repeated the fields.
    LOOP at ITAB to WA.
    CLEAR bdcdata_wa.
    bdcdata_wa-fnam = 'BDC_CURSOR'.
    bdcdata_wa-fval = 'RM08M-EBELN'.
    APPEND bdcdata_wa TO bdcdata_tab.
    CLEAR bdcdata_wa.
    bdcdata_wa-fnam = 'INVFO-BLDAT'.
    bdcdata_wa-fval = wa-X2." 1st time pass the X2 fields
    APPEND bdcdata_wa TO bdcdata_tab.
    CLEAR bdcdata_wa.
    bdcdata_wa-fnam = 'INVFO-BLDAT'.
    bdcdata_wa-fval = wa-X2." pass the same value to repeated field
    APPEND bdcdata_wa TO bdcdata_tab.
    Endloop.
    Hope you can understand.
    Regards,
    Dhina..

  • Why does 'User not registered for online use' show up when I try to import a cd into itunes. None of the cd info shows up either

    Why does 'User not registered for online use' show up when I try to import a cd into itunes? None of the cd info shows up either.

    Well, the format I upload from the camera is "video clip" or "video for Windows"...sometimes I've converted them to avi format, too. But as I said, it never even lets me get that far...I never get to even select a clip. As soon as I tell the program to "import/clip" it freezes up before I can even go to the folder that the clips are in. It has only begun to do this recently, and I'd never had any problems like this before. Last night I tried it again, and I clicked "open composition", and it froze when I did that too.
    I'm not sure how much more specific I can be about the details of the clips, since I'm positive it has nothing to do with the clips themselves...I'm running Windows XP, though...Home Edition Service Pack 2, Pentium 4 CPU 2.80GHz, with 504 MB of RAM. I have had the automatic updates turned on since I did my last reformat a couple of weeks ago. Could it have something to do with some kind of an update it may have done?

  • FTP problem:  why do my uploaded files contain nothing?

    Hi,
    I'm using the sun.net.ftp package
    In my servlet I have,
    public void doGet(HttpServletRequest req, HttpServletResponse resp)
              throws ServletException, IOException {
              PrintWriter out = resp.getWriter();
              out.println("Attempting to connect to www.ttc.ca<br><br>");
              FtpClient client = new FtpClient(host, 21);
              try
                   client.openServer(host);
                   client.login(uid, pwd);                    
                   client.cd("public/postings/dev");          
                   client.binary();               
                   TelnetOutputStream fos;
                   fos = client.put("myupload.txt");
                   out.println(client.getResponseString() + "<br><br>");
                   int i =0;
                   FileInputStream fis = new FileInputStream("//station/xxxx/personaldirectory/desktop/blah.txt");
                   while (( i = fis.read()) != -1 )
                        fos.write((byte) i);
                        out.println((char) i);
                   out.println("<br><br>" + client.getResponseString() + "<br>");
                   out.println(fos.toString());
                   fis.close();
                   fos.close();
                   out.println("<br><br><br>");
                   client.closeServer();
              catch (FtpLoginException ex)
                   out.println("failure");
    So right now what it does is make the file myupload.txt onto the server and leaves it blank. However, the size of the file matches the size of the file I read from. Why is the uploaded file showing up with no content and how can I remedy this?
    Thanks
              

    Never mind I got it to work for txt files only
    FtpClient client = new FtpClient();
    client.openServer(host);
    I used a blank constructer instead of puting the host and port # in there

  • Why is the transportation C02e 4x higher for Macbook pro 15" compared to iMac 27".

    Why is the transportation C02e 4x higher for Macbook pro 15" compared to iMac 27".

    Both are great machines but have rather different purposes...while the graphics are good on the MBP, the iMac graphics would be a major step up.  Especially if you want to do heavy duty photo or video work, and heavy game use.  If the MBP is getting hot and running the fans hard, that would point you to the iMac with its higher end graphics capability.
    The photo and video work would be much easier with the larger screen and higier end graphics and faster cpu.

  • JVM performance in case of JVM memory usage is high

    Hi All
         Here is some query about JVM performance in case of JVM memory usage is high.
         I have a server of 16GB. For JVM 12GB and for OS 4GB.
         Let say, My Application creating many Unnecessary Objects and consumes very high memory.
         Also, there is a gaurenty that limit of memory is it never exceed 2GB.
         No, in worst scenario memory used by JVM is 2GB.Ok.
         I have free memory available for JVM is 10GB(16GB - 2GB - 4GB(any OS memory usage)).
         Now, for any Application processing I have 10GB.
         So, does it affect application processing for which I have 10GB.
         I mean does JVM performance decreses in high JVM memory usage even I have occupied more memory to JVM.

    Hi All
         Here is some query about JVM performance in case of JVM memory usage is high.
         I have a server of 16GB. For JVM 12GB and for OS 4GB.
         Let say, My Application creating many Unnecessary Objects and consumes very high memory.
         Also, there is a gaurenty that limit of memory is it never exceed 2GB.
         No, in worst scenario memory used by JVM is 2GB.Ok.
         I have free memory available for JVM is 10GB(16GB - 2GB - 4GB(any OS memory usage)).
         Now, for any Application processing I have 10GB.
         So, does it affect application processing for which I have 10GB.
         I mean does JVM performance decreses in high JVM memory usage even I have occupied more memory to JVM.

  • HT1476 why does the battery usage percentage not available in ios5.1.1???

    why does the battery usage percentage not available in ios5.1.1???
    and why is clock not available on ipad????

    Because that is a decision the Apple made.  You can get the battery percentage (within 5%)  by using a free app such as BatteryLife Lite, but it will not show the percentage on the top of your screen.

Maybe you are looking for