Why is align stroke inside and outside not working correctly.

I'm trying to add a stroke that's aligned to the outside of my path. It appears to be offsetting the stroke *and* moving achor points at the same time. It does the same kind of thing when I align the stroke to the inside. It is fine when i align the stroke to center. Please see my screenshots. The one that is offset to the top-left is the align-inside one. Why is this happening? How do I fix it? Help!

It's also here

Similar Messages

I have an iPhone 4 on contract and its not working correctly , what should I do ?

I have an iPhone 4 on contract , I only have this 5 and a half months and the iPhone is not working correctly and i do not have insurance .. What should I do ??

It sounds like you did not purchase it at the Apple store? That doesn't matter - you can still take it to Apple to troubleshoot it.
You can also try to troubleshoot it with the help of the folks here - if you want to do that, let me know and I'll ask that your post be moved to the iPhone forum where you're more likely to get knowledgeable answers, ok.

I want to know, why the update process of firefox is not work correctly. Because of i begin update that is not work for along time(Connecting to the update server). So why should i do this problem. Please help me.

Update process is not work

See:
* [[Software Update Failed]]
* http://kb.mozillazine.org/Software_Update (Software Update not working properly)
Remove the files in the updates and updates\0 folder.<br />
You may need to delete active-update.xml and updates.xml as well if present.
C:\Users\<user>\AppData\Local\Mozilla\Firefox\Mozilla Firefox\updates
(%LOCALAPPDATA%\Mozilla\Firefox\Mozilla Firefox)

Clientless VPN and Java not working correctly

In a recent discovery we found that the newest version of java will not work with our Cisco SSLVPN setup
We are using an ASA5510 with 8.0.4 IOS version and 6.1.3 ADSM version and most users use an mstsc.exe smart tunnel to rdp into our terminal server farm.
Our laptops are being imaged with Java 6 update 3 (this works fine) then upgraded to Java 6 update 11, after which the smart tunnel appears to launch but a connection cannot be established. Reinstalling the older version of Java resolves the problem.
I was wondering if anyone else has encountered a similar problem and found a workaround. Currently, company equipment is not being upgraded to the latest version of Java but personal equipment is a different story.

To get the old downloader back follow the directions below.
# In the [[Location bar autocomplete|Location bar]], type '''about:config''' and press '''Enter'''. The about:config "''This might void your warranty!''" warning page may appear.
# Click '''I'll be careful, I promise!''', to continue to the about:config page.
# Filter '''browser.download.useToolkitIT'''.
# Double click and '''make sure it says true.'''
# You now have the classic downloader back! Yay!
Any issues or confused?
* http://kb.mozillazine.org/About:config

T42p vista fn + f3 and fn + f4 functions (turn off screen and sleep) not working correctly

Hi -- I recently installed windows vista on my T42p. It works fine except that the fn+f3 and fn+f4 functions do not work as expected. Before installing the hotkeys driver, the fn+f4 function worked correctly while f3 did not (going to sleep worked, turning the monitor off did not). I then installed the recommended hotkeys driver. Now fn+f4 makes the monitor turn off while f3 does nothing ... fn+f4 is supposed to put the laptop to sleep. On top of this, if i select "sleep" from the start menu, the computer turns the monitor off instead of going to sleep.
Presumably, the sleep button could still be telling the computer to go to sleep, but the actual operation of going to sleep is now broken? Just a guess. Anyways -- anyone know how to resolve this so that fn+f3 turns my monitor off and fn+f4 puts my computer to sleep?

I've too this problem, but more, my sound mute wasn't worked (for deblock, but it can block it few second before...) 5 days in 5-6 instalation of three version of winxp: winxp ru x64 sp2, winxp es/ru sp3 x32.
eventually I've found and ran "TPOSDSVC.exe" in instalation directory and it give an opportunity deblocking the sound volume!!!!!!!!!!!! and I don't need more functions
volume levels and brightness adjustment worked well without OSD (before I ran TPOSDSVC.exe) and with OSD.
and now I don't know worked this bustered sound driver in winxp x64.
ThinkPad T61 7664

PSE 11 - MacOX 10.7.5 Printing Wide Format Printer and Profiles Not Working Correctly

Macosx 10.7.5
When I start up PSE11 and go to print I set up the paper size then select a Printer Profile. When print the image it is a mess and seem to be black and white it is as if I printed on the wrong side of the paper.
I then go and try to print it again.   Now it all works as it should beutiful colours and spot on. all other print following this works.
Then I shut down PSE11.   Start it up again. Guess what first print is a mess again.   all others after are fine.
I uninstalled PSE11, deleted prefs. and reinstalled PSE11.    Same thing..   first print a mess all others ok.
the issue can be replicated consistantly......
no problems with PSE10 or PSE9
any suggestions?????
cheers elo

Thank You for your suggestions.
I have been printing using PSE for over 14 years going back before the term PSE came up. I have done this professionally using profiles from others and those I generate myself..
All the things you mentioned have been done.
The main point missing in your suggestions is   It is only the first print every time I open up PSE11 that does not work...
at completion of print I immediately go back to the file command and say print and then bypass all settings and print again.   this time and every other print aafter are perfect...      I did not change one single setting...
I know about printer and adobe settings etc.     but thanks for going through the list it was a good reminder of how to remember everything sometimes we rush and forget something...
Finally    It works PSE6, PSE9, PSE10, CS5, Lightroom 4.   I think I have the settings right......
Any suggestions for how to get PSE11 to force the settings for the first print would be appreciated..
Only thing I have not done is upgrade to the latest version of the epson driver. Released less than a month ago to provide support for mountain lion.(iam only on lion) Maybe just maybe???   you never know.   Will try this when I finish by next batch of prints.
I will back up as I do weekly...    Still have the old driver from way back in release 10.5.8   will try to fire up to 10.5.8 and see what happens....
cheers elo
Message was edited by: Elo Laugesen

Time change for daylight savings and Alarms not working correctly

we have 3 iPhones in our house. 2 were set to auto time change for daylight saving and one wasn't. 1 did the auto time change with out an issue and all alarms worked ok. The other 2 have had issues with not been able to set the alarms ie set alarm for 0630 and it goes off at 0530 even though the time is set correctly. The 1 that was set to autotime worked fine until I switch auto time off, now the alarms on this one wont work either. well they work but just at the wrong time. The 3rd phone will allow alarms to be set, but the alarm will go off an hour earlier and this phone will not allow the alarm to be set for 0630 at all.
Has anyone had this issue and resolved it. It makes getting up for shift work a right pain..

Read here:
http://www.appleinsider.com/articles/10/10/11/applesays_ios_software_update_to_fix_pesky_alarm_clockbug.html

Photos app and Calendar not working correctly since upgrade.

I was trying to insert a photo into a Word document. When I go to the finder the photos app is grey. I cannot chose it or find my pics. Why? I tried dragging and dropping. That doesn't work either.
My calendar has been working fine since I upgraded, until today. I powered on today and my calendar is blank. I have TONS of stuff saved on there. I have gone through the preferences and checked all settings, everything looks fine. I even re-entered things just to let it refresh, to no avail. Any suggestions.
I am on a Macbook Pro (early 2013).l
Thank you

Do you have a backup? If so, try this for Calendar.
Quit the application.
Go to Finder and select your user/home folder. With that Finder window as the front window, either select Finder/View/Show View options or go command - J. When the View options opens, check ’Show Library Folder’. That should make your user library folder visible in your user/home folder. Select Library/Calendars and restore from the backup.

Keyboard and mouse not working correctly after installing Windows 8.1

I was forced to upgrade my computer to Windows 8.1. My keyboard worked fine until the sytem did a reboot. Numbers on keypad stopped typing and letters were being capitalized when the caps lock was off and the numbers across the top will only type the symbol above the numbers.
I looked up this problem and it seems I need to enter UEFI settings and disable Intel XHCI mode. When I get into the UEFI settings I cannot make any selection from the startup menu. Both my keyboard and mouse stop working.
Any suggestions?
This question was solved.
View Solution.

Thank you for posting a response. Fortunately, I didn't have to try your solution because the computer resolved itself.

Why is the Up to date program not working correctly and letting me download Lion when I have a qualifying system?

The Apple online store doesn't seem to recognize my serial number or says it is not correct? What is going on with this???

Well I finally figured out why my serial wasn't working. Apparently it was because my system was customised as opposed to off the rack, not sure why this should be a problem though.
Anyway, I used the old paper and fax method and have received confirmation that it is on it's way. If you haven't received confirmation I'd recommend chasing Apple to find out where it is.

IChat Audio and Video not working correctly...

Hi.
I recently upgraded to Snow Leopard. Before upgrading, I was able to video chat with little to no problem with family over iChat. I just tried it again today for the first time since upgrading to Snow Leopard and the audio is barely working (can only make out every few words, if that), and the video is extremely distorted to where you can sometimes not even tell there are people there. It gets all pixelated and weird. I tried doing the chat with Google Talk and then again with Skype, and had just as many problems with those. My family is using a Mac with an older OS, and they can see and hear me perfectly fine. I'm not sure if the problem is with my computer or with theirs, or if it's just a communication problem, but any ideas would be really helpful. Thanks!

After iChat developed missing audio and video pixellation problem post Snow Leopard installation at my mother-in-law's machine (and ours), I tried the usual decrease the bandwidth fix to no avail.
The solution that actually fixed the probem was to turn off port forwarding protocol on her Time Capsule and our Airport Extreme. Things are now working smoothly even at 500 kbps settings on both ends.
An interesting aside... Turning off port forwarding for ssh to her machine doesn't kill the ssh port tunnel from the outside LAN to her mac. It looks like iChat and the Time Capsule keep an incoming ssh tunnel open even if you have disabled port forwarding on the Time Capsule. I suspect this "secret" opening of ports is the magic of why iChat and screen sharing have been so much easier to set up when a Mac is behind an Apple router. 3rd party routers need ports manually forwarded to the Mac. Apple routers just worked ---- and it looks like Apple does it by invisibly opening ports on their routers when a Mac runs iChat.
Pretty nifty, but also silently opens a security hole that you may THINK you closed. SL seems to trip up over this arrangement when you also turn on Port Mapping Protocol and manually assign ports to forward.
At any rate, it wasn't the data rate, it was a new bad interaction between the Apple Router's Port Mapping Protocol and iChat 5. Turn off PMP on the airport and all becomes well once more.

Compass and gps not working correctly

pre-ordered my iphone4 on the 15 of June it arrived on the 24!The next morning, I tried to get my location on the map app and it could not produce my location. also the compass app is constantly telling me to wave the phone in a figure 8. Anyone else having this issue ?

Having the same flaky issue. 90-100 degrees off. It seems to only happen while in the interior of a vehicle, moving or not. Being that this is the most likely location one would use the compass telemetry of the phone, it should most certainly would have been designed to work in this environment. Stepping outside the vehicle seems to return the compass to normal and fairly accurate operation. I have used the built in compass functionality with several different GPS apps, both Apple original software and 3rd party software with the same unreliable performance. I too frequently get the 'figure-8' notification citing interference. I have performed the calibration several times outside the vehicle to no avail.

HFR Range from and to - Not working correctly for hierarchies?

Hi All,
Can anyone help me with my below issue relating to ranges in Oracle’s Hyperion Financial Reporting Studio tool.
The issue I’m experiencing is that when I create a report and use the ‘Add Relationship’ -> ‘Range’ option for my month dimension, the correct months are returned as long as the start month and end month are not the same.
In our setup we have 2 month hierarchies, one for the fiscal year (July to June) and another for the calendar year (January to December). The problem that I’m noticing in the report, is that when I enter a range from July to July, that instead of returning July, it returns July, August, September, October, November, December, January, February, March, April, May, June, July. My though it that it is looping through both the fiscal and the calendar hierarchies to return the range, instead of only the fiscal hierarchy. Both these hierarchies have the same members, however ordered differently.
Does anyone know of a way to resolve this within HFR?
I noticed that when creating the range, there is an option to ‘select a hierarchy’. At the moment there is only 1 choice ‘ Period’, however I’m curious if I could create and link a hierarchy to the fiscal hierarchy, that this might resolve the problem?
Any ideas?
Thanks,
Lance

Hi Lance,
IIRC Range uses the first (main) hierarchy - so you'll need to move the Fiscal year one to be first in the outline.
Cheers, Iain

Dreamweaver and Fireworks not working correctly

I am taking a DW8 class. I have MANY photos I want to use
fireworks for. Installed free 30 trial of DW8 and Fireworks from my
books CD. Did what DW8 said in creating web photo. Used Fireworks
BUT when I clicked on the photo to enlarge I got the black box
around it saying I could enlarge it NOT view it like a picture
show. What I want is to have all photos per event show up and then
let people click on the photo to see either that ONE OR ALL but
full screen. What do I need to do? Should I try downloading the 30
trial from this site for both programs instead of the CD from the
DW8 instruction book?

Hi
The software crashes or freezes. Fireworks will only let me save an item twice, after that, I get an error message that tells me I do not have permission to save that item because it is locked, so then have to save into a different folder or directory, crazy.
When trying to uninstall in control panel, will not open the uninstall, think some kind of permission problem.
I may just do a system restore back to how the computer was purchased, then install all programs again............. See if that works first. None of the other programs are doing this; however, just Adobe, so not sure what happened, just started working like this out of the blue.............?
I am going into a long meeting this morning, so can only work on it in the afternoon.
Thanks for replying...........
Tracey
Sent from Samsung tablet

RAM previewing and rendering not working correctly

Hi,
Today I was just about finished editing a video on CS6 and then when I'm about to add the last effect and render it it stuffs up on me:(. What happens is that while RAM previewing at some point during the loading of the preview it will stop loading, It will then proceed to play the ram preview on loop and when I press a button to stop it a small box pops up in the centre of my screen and the ram preview bar to show what has loaded (the one which shows green for parts that are loaded and blue for cached) turns black and sometimes other parts of after effects turn black. This has happened before and I fixed it by uninstalling and reinstalling After Effects about 6 times. I would do that this time though I would like to know the cause of it and any possible fixes as it is quite irritating. Another thing that may be happening is the RAM usage is slowly filling as I render. This has happened before on my laptop and I did not manage to fix it though it was not related to the first issue that time. The last time when it happened on my laptop the RAM usage eventually filled up to 100% and it would no longer render. I am not sure if it is happening this time as it is still currently rendering though I will update the thread if it does. Finally my render is going very slowly, I am not sure if this issue is realted to any of the above or if it is just the effects I am using though. My memory and multiprocessing settings are using 6 cores of 7 with 2 GB of ram allocated to each with multiprocessing on. My ram allocated for other programs is 6GB. To fix these Issues so far I have tried clearing the cache, purging the memory and image cache, restarting my computer and reinstalling after effects. My specs are:
i7 4770k non overclocked
GTX 780
G.Skill Ripjaws Z 2133mhz 32GB
Samsung 840 pro
Seagate Barracuda
MSI Z87-G45
H100i cooler
Any reply is appreciated
Thanks in advance
Sam

How much experience do you have with AE? Ram preview can be lengthened by adjusting the resolution of the composition window, different parts of the project can be previewed using the work area, and preview length and render time are both a function of composition frame size. Complex, memory intensive effects like particle systems will reduce the render time and the length of a ram preview. Without knowing the details of your composition it's hard to say if you are running into a bug, running out of resources, or experiencing normal behavior.

Why is align stroke inside and outside not working correctly.

Similar Messages

Maybe you are looking for