Why is ATX ver 2.0 PSU Bad for AMD Systems

i don't understand . How are people going to know not to buy Power slupplys with Two 12V- Rails.. I just buitl a AMD Fx-55 with MSI NEO 2 .. ok And I pick out the Antec Neo power 2.0ATX . And with that PSU I could not overClock at all . . I out in my OLD Antec True Power 550 Watts. And my system is running 100% better .. I don't understand ,Why is that ? all the new Power slupplys on the Market. all 2.0 with Dual 12_Volt Ralis.. I just a litte mad because how as the End user going to know not to put ATX 2.0 PSU on a AMD . And only on Intel Base Systems .
If I"m wrong tell me so ..
Thanks

For all of us who dont know what do you mean by "Two 12V- Rails" & how do you tell the difference?

Similar Messages

Hi, I am using an old PC P2 450Mhz, 256 MB Ram. Is ver 3.6.16 ok for my system or will it slow down the system? Thanks

Hi, I am using an old PC P2 450Mhz, 256 MB Ram. Is ver 3.6.16 ok for my system or will it slow down the system? NODD is the anti-virus. I am not happy with IE or goolge as these are taking too much space. Thanks

The system requirements for Firefox 3.6 are:
* Pentium 233 MHz (Recommended: Pentium 500 MHz or greater)
* 64 MB RAM (Recommended: 128 MB RAM or greater)
You exceed the minimum and are just short of the recommended processor. It should run OK but the only way to tell will be to try using it. Note that using add-ons can slow Firefox down, so if you start installing quite a few you may get performance issues.
https://www.mozilla.com/en-US/firefox/3.6/system-requirements/

Why is the selection in Ireland so bad for the iBookstore!?

I don't know if this is the right place to ask this question but i'm just really piXXed off because all we have on the irish iBookstore is books by Project Gutenberg which are just TERRIBLE. we have no books from good authors. We only have free books. I want to buy good books on the iBookstore and the only way i can do that is by setting up an english apple account which i think is unesscary. When is Ireland getting good books!?

There are other ways of getting books onto your iPhone, though I'm not sure if we're allowed to talk about them. I have 3 seperate books apps on my iPhone, two tied to particular stores, one which will read more or less anything DRM free. Two of the three also have desktop apps, which allows me to import books from other places and sync using file sharing in iTunes.
Try Stanza and Kindle.

Why is the Hulu Plus interface so bad?

Why is the Hulu Plus interface so bad? The Hulu Plus interface that is presented on my Sony Blue Ray player (BDPS1500) is very difficult to access my Queue to play the shows I always watch. When you access Hulu Plus it should immediately display “Your Queue” as the highlighted default selection – that way I can click the SELECT button once and then see the list of programs in my queue with the most recent program that I watched highlighted – so I can then click SELECT a 2nd time and now I am looking at the episodes of the program series I watched last with the next episode highlighted so if I press SELECT a 3rd time I will be watching the next episode in the series. The way it is now I have to click all over the place trying to locate My Queue – as it is NOT visible when Hulu Plus initializes. And when I do finally find my queue and select it, the last program I watched is not the default highlighted item. After probably 15 or more clicks up, down, left, and right I finally get to the next episode. This should be an easy change and one that would greatly improve the user experience.

The trick is to go do this:
1) go to http://www.adobe.com
2) At the top in the menu bar look for: Products (this is the first item in the Menu bar;
3) When you click on it, you will get a list of "Top Destination"
4) In this list, Photoshop is listed as a special item because of its popularity;
5) Click on it and you will get this:
http://www.adobe.com/products/photoshopfamily.html?promoid=JOLIW
Hope this helps.

IPad clipboard - one reason, why it is so bad for me

iPad clipboard - one reason, why it is so bad for me
search for adresses on an app for that and export the found adresses per email;
THe first task goes well; further adresses (say, I need today three adresses from acertain village) are going wrong. Can anyone consider, why?

Fourth time, because my first three answers were blowing in the wind, gefressen guzzled by the clipboard or reloading safaripage, the third by notes, never I have seen there have been hundred of chars eaten by notes.
1) I have an application (“app”) to search addresses in austria as there is a phone-number connected.
2) I can generate a contact entry with the result or export it in various channels, say I send it per e-mail to me (for using it on an other device outside iOS or send it to a collegue.)
3) If there are more than one wanted results, I have to send them one by one.
4) Looking for the e-mails, they may have a totally senseless content (an earlier clipboard-content) or
every e-mail has the same content: the first address in the results-list.
5) Please do not ask me, why this is. I would be glad to hear from you how to stop this behavior of
iPad (with wich I was really happy for years and which is since month not helpful but the source of nuisance friendly said on every use
daily, hourly, eight times or so every hour)
{see https://discussions.apple.com/message/26921591?ac_cid=op123456#26921591}
And yes I have tried all resettings though not the one to delete all content, perhaps Apple can find a better solution for me (so I thought weeks before).

Why is Norton Anti-virus bad for mac?

Hi,
I like to know why Norton Anti-virus is bad for mac? Someone told me it's because norton digs around in the directory and that's a no no. Has anyone had bad experiences with norton? I like to know the pros and cons, thanks.
Tom

Hi, Tom.
NAV is not "bad for mac."
Do not believe the FUD (Fear, Uncertainty, and Doubt) spread about Norton AntiVirus. A good bit of that is undeserved, especially when it comes to NAV 10, which is the Tiger-compatible version and what I use.
I recently engaged in a debate on this subject in this thread, so you can read some of my thoughts there in response to the usual FUD spread about NAV and Symantec Norton products in general.
There are security threats that can affect your Mac besides those cited by Kurt. There is more than the mere threat of passing along Windows viruses.
See my "Detecting and avoiding malware and spyware" FAQ for my recommendations as well as a list of some recent Mac OS X security threats that have emerged, including Trojans, rootkits, and spyware.
Good luck!
Dr. Smoke
Author: Troubleshooting Mac® OS X
Note: The information provided in the link(s) above is freely available. However, because I own The X Lab™, a commercial Web site to which some of these links point, the Apple Discussions Terms of Use require I include the following disclosure statement with this post:
I may receive some form of compensation, financial or otherwise, from my recommendation or link.

Why does my computer buffer videos so bad

Why does my computer buffer videos so bad?

It can be a number of things, RAM and connection speed are the two on the top of my list.

Why is my iPod touch camera so BAD... isn't it supposed to be 5mp?

Why is my iPod touch camera so BAD... isn't it supposed to be 5mp?

" isn't it supposed to be 5mp?"
No.
"still photos (960 x 720) with back camera"
That is about .7 MP.
http://www.apple.com/ipodtouch/specs.html

Why am I suddenly receiving the message: 5.1.0 - Unknown address error 501-"5.1.8 Bad sender's system address" I am only getting it for Mozilla Thunderbird

In the past three days, whenever I send a message, it does not go through. Instead, I get the message: 5.1.0 - Unknown address error 501- "5.1.8 Bad sender's system address". I tried downloading the newest version of Thunderbird but it did not work. I do not receive this message when using other software.

I had the look that you suggested. As far as I can tell there are no problems with the user name. Maybe I should check with my email company, Cogeco?

Why has Firefox Ver 2.0.0.20 quit working on a Win98 SE system

I Have been using firefox ver 2.0.0.20 on a Win98 SE system for several years without any difficulty. Recently this stopped. Firefox either won't load or if it does it quits working after a few minutes and goes back to a continuous load mode. The ver 2.0.0.20 is still loaded but no longer works. Shouldn't the old version continue to work on the Win98 system, or has Firefox dropped support for Win98 system totally. If Firefox is activated shortly after boot-up, it will load and work for a few minutes, then drop off and stay in continuous load cycle indefinitely. Reboot of the system produces a repeat of the described cycle, It will remain working for only a short time, before dropping out.

In case one or more of your settings files have become corrupted, if you haven't already, see whether you can start up in the Profile Manager and create a new profile.
Did Windows 98 have Start > Run? If so, run
firefox.exe -P
Any time you want to switch profiles, exit Firefox and return to this dialog.
When creating a new profile, I recommend using the default location suggested, and to avoid data loss, not re-using any existing folder. Before deleting unneeded profiles, I suggest making a backup first in case something were to go wrong.
Will it start? If not, there may be a problem with Windows, or with your Firefox program files, or with malware that blocks third party browsers. I don't have any leads on the non-Firefox issues.

PSU Query for MSI KT3 Ultra-ARU running 3000xp

Hi There,
Before buying a new Motherboard I was just wondering if the problems I'm getting are related to the PSU which is about 5 years old. I've just upgraded my processor to a Athlon 3000 XP 333 FSB which goes into the MSI KT3 Ultra-ARU (MS-6380E v1.X) motherbaord, which I've upgraded the Bios to version 5.7, I've also upgraded my graphics card to the Leadtek Geforce FX5900XT which also plugs into the PSU. When setting my fsb to 166 my PC either won't boot or when I try to run say 3DMark it just freezes, but when I set my FSB to 133 it works fine. I was wondering if it is trying to draw too much power from the CPU.
I don't really know how to write the PSU details down correctly so I've just copied everything from the unit.
Power Man MN :- FSP 300 - 60 BT
AC Input - 115/230v~, 10/5A, 60/50 HZ
DC Output - +3.3V 14.0A(org), +5V - 30.0A(red), +12v - 11.0A (yel) + 5VSB
- 2.0A (purp), -5V - 0.3A (white), -12V - 0.8A(blue)
Fuse Rating 6.3A, 250V
Max Output Power 300W (+3.3V&+5V=150W Max)
Hope this makes sense,
Thanks in Advance,
Paul.

Thanks for that, What would you got for between these two :-
is 550w better than 420w? and is ATX 2.03 just the normal ATX size?
Hiper PSU ATX 420W Active PFC SF-420TS Dual Fan, Silent/Temp Ctrl
1,PRODUCT FEATURES:
Active PFC;
Double Ball-Bearing Fan;
Dual Fan;
Gold Plated Connectors and fan grill;
Adjustable fan speed - Silent function.
Product Description Hiper 420TS - power supply - 420 Watt
Device Type Power supply
Form Factor Internal
Specification Compliance ATX 2.03
Output Voltage +3.3, ±5, ±12 V
Power Provided 420 Watt
2,Q-Tec PSU ATX 550W Gold PFC Dual Fan PSU for PIII/AMD/P4 CPUs
PRODUCT FEATURES:
550 Watt PSU;
Suitable for ATX systems and Pentium 4;
2 fans inside for optimal cooling;
Noise level less than 33 dB (A);
Complies to latest PFC power distortion standards.
Product Description Q-Tec Dual Fan Gold power supply - 550 Watt
Device Type Power supply
Form Factor Internal
Dimensions (WxDxH) 15 cm x 14 cm x 8.5 cm
Input Voltage AC 230 V
Power Provided 550 Watt
Thanks,
Paul.

Regarding Error message in ME_PROCESS_PO_CUST badi for validation.

hi Friends,
I am Using ME_PROCESS_PO_CUST badi for validation in Purchase order (ME21N),
For that I implemented PROCESS_ITEM method which fires during each row now i add another validation in same implementation for plant should be same through out the all line item. Now following code is woking fine but when for second line item user changese plant then it shows error message as per logic which is fine but even after changing plant to correct one the error message is still coming why is it so?
following is my current validation code
method IF_EX_ME_PROCESS_PO_CUST~PROCESS_ITEM.
DATA:ls_poitem TYPE mepoitem,
       ls_poitem_set TYPE mepoitem.
DATA:ls_poheader TYPE MEPOHEADER.
DATA:lm_poheader TYPE ref to IF_PURCHASE_ORDER_MM.
DATA:w_mara TYPE mara.
DATA:IT_ZMMTBL039 TYPE STANDARD TABLE OF ZMMTBL039 ,
       WA_ZMMTBL039 TYPE ZMMTBL039 .
DATA:ls_poitem1 TYPE mepoitem.
DATA:V_KUNNR1 TYPE KNA1-KUNNR.
DATA:V_KUNNR2 TYPE KNA1-KUNNR.
DATA:W_WERKS(4),
       w_werks_tmp(4),
       w_flag(1).
ls_poitem = im_item->get_data( ).
lm_poheader = im_item->GET_HEADER( ).
ls_poheader = lm_poheader->GET_DATA( ).
IF ls_poitem-werks IS NOT INITIAL.
    w_werks = ls_poitem-werks.
    import w_flag to w_flag from MEMORY ID 'FLAG'.
    if w_flag is initial.
      w_flag = 'X'.
      EXPORT w_werks_tmp FROM w_werks TO MEMORY ID 'MEMO1'.
      export w_flag from w_flag to MEMORY ID 'FLAG'.
      clear: w_flag.
    endif.
ENDIF.
IMPORT w_werks_tmp TO w_werks FROM MEMORY ID 'MEMO1'.
break swaroopb.
IF ls_poitem-werks NE w_werks.
      MESSAGE E010(zparts) with 'Different plants are not allowed in single PO.'.
ENDIF.
CLEAR: WA_ZMMTBL039,w_mara.
REFRESH:IT_ZMMTBL039[] .
SELECT *
    INTO TABLE IT_ZMMTBL039
    FROM ZMMTBL039
   WHERE bsart EQ ls_poheader-bsart.
IF sy-subrc EQ 0.
    CLEAR: WA_ZMMTBL039,w_mara.
    SELECT SINGLE *
      INTO w_mara
      FROM mara
     WHERE matnr EQ ls_poitem-MATNR.
    IF SY-SUBRC EQ 0.
      READ TABLE IT_ZMMTBL039 INTO WA_ZMMTBL039 WITH KEY bsart = ls_poheader-bsart
                                                          mtart = w_mara-mtart
                                                          spart = w_mara-spart.
      IF SY-SUBRC NE 0.
        MESSAGE E009(zparts) WITH ls_poitem-MATNR w_mara-spart ls_poheader-bsart .
      ENDIF.
    ENDIF.
ENDIF.
end method

Hello Swarup
Since you want to compare all items together (having the same plant) I would suggest to implement this logic either in method CHECK or POST of the interface.
However, if you want to make your checks within the PROCESS_ITEM method then you should change your logic.
It does not make sense to work with the ABAP memory within a BAdI implementing class because the class itself is your "memory".
I would use the following logic to implement your validation:
lo_poheader = im_item->get_header( ). " retrieve header instance
lt_items = lo_poheader->get_items( ).   " retrieve all items
ls_detail_x = im_item->get_detail( ). " details of currently processed item
LOOP AT lt_items INTO ls_item.
    ls_detail = ls_item-item->get_detail( ).
    IF ( ls_detail-werks NE ls_detail_x-werks ). " validation failed
    " do something...
   ENDIF.
ENDLOOP.
However, I would prefer to do this kind of validation in CHECK or POST method.
Regards,
Uwe

BAdI for replacing CRM Pricing

Hi Experts,
I have a requirement to make a RFC call to retrieve the pricing from ECC/Vistex in CRMD_ORDER transaction after hit enter key with product/qty entry. I'm searching a BAdI for CRMD_ORDER (so many BAdIs for this TC) that can RFC by customer/material to retrieve the pricing from ECC then overwrite CRM's pricing with it (at least has customer/material as importing and subtotals as export/changing). Can anyone please advise if there is a BAdI for this purpose?
Thanks in advance, Jin

In CRM_PRICING_I_BADI-MERGE: there are netvalue/price and subtotals in Importing IU/S_PRICING_I_WRK, but not in Changing CS_PRICING_I_BADI.
In CRM_PRICING_BADI-MERGE: there are none of them.
Why PRICING BADIs have no Pricing fields that can be changed? I think I'm missing something here. Any advise / documentation?
Thanks, Jin

Feel bad for asking this but

I'm new to this forum and only just bought an 80GB iPod classic. Anyway, I don't actually like the menu displays. I never put cover art on my iPod and it also annoys me when you see a track and instead of the cover art it comes up with a grey box and question mark. Is there any way or any software you can use to either get rid of these, or change the display settings for it to be like the menus of a 5th generation iPod?
I feel bad for asking, feel bad for not liking the new screen designs, but can anyone please help me out?

There is not way to change it short of hacking the iPod, and I don't know of any that are currently available. You could find someone with a late 5th Gen iPod and trade with them.
Why not put the cover are on it and go with the flow..so to speak.

Report doesnt hit BADi for virtual key figues

Hello
Report uses virtual key figures. Report is based on multicube. I generated the report after I have created BADI and class. It hits BADI for virtual kf during generation (RSRT)
It doesnt hit BADI if I execute the report. Virtual key isnt populated.
Any reason why?
thanks

Hi,
I have the same issue, how did you solve it ?
Thanks
Cyril

Why is ATX ver 2.0 PSU Bad for AMD Systems

Similar Messages

Maybe you are looking for