Why is Audio and Video Skipping, Pausing, FF'in in iTunes 11.0.1 (12)

I've got iTunes 11.0.1 (12) installed on my MacMini (2007, Liion 10.7.5,4GB of RAM).  I use a 2TB WD MyBook to store my library. As of a week to 10 days ago, audio and video started skipping during playback.  Not all tracks or vids.
I last updated iTunes on 12/19.
What do I do?  Should I downgrade to the previous version?  Or does someone else with a similar problem have a solution?

Looks like it was an external drive problem.  Once I saw vids were skipping other video players, and file transfers from The WD drive paused and started like the videos played told me it was a hardware problem. No more Western Digital drives for me.

Similar Messages

  • Audio and video skip after installing USB Sound Blaster Audigy 2

    Hi community,?Since installing my USB Sound Blaster Audigy 2 NX, audio and video skip when being played with either windows media player, winamp, iTunes, neroshow, winDVD 7, creatives own media players etc. in fact anything I can try, won't work. Games are fine, in fact the sound is brilliant. I'd be really grateful for any feedback on this, not being able to listen to music is driving me crazy. Thanks.

    Hello thebro90,I had the same problem.After tryed everything, uninstall, reinstall audio drivers, etc, I finally manage to solved it by updating the CPU drivers... I have a AMD Atlhon X2 4800+Never had the problem again.Best regards.
    S?rgio

  • Audio and Video skipping and jumping

    WUTFDT3   getTV channel is skipping and jumping in the audio and video. It will skip and jump for about 10 to 20 seconds and then be fine for 30 seconds to a minute. Does anyone else have this problem or is it just me

    Your internet connection might be the problem. I am a fellow student also and my school's wireless network is always slower than the ethernet. And also, did you try to watch the TV show while it is downloading? I know it can but I suspect that might be the problem too. (so basically I don't know what is going to too) But if there is a ethernet port on your wall use the ethernet connection and watch it after it downloads completely. You also said that you purchased it twice? You don't have to do that. Email Apple and they should let you download it again for free and maybe they can give you credit for the second download. Here is the link:
    http://www.apple.com/support/itunes/store/download/
    Good luck.

  • Audio and video skipping in published MP4 - in Captivate 7

    I have a project that has a mix of imported Powerpoint slides and Captivate Recording slides.  When I publish this project to output as MP4, the resulting video shows the opening couple of slides, then skips a couple of slides and after that intermittently skips further slides... there are 51 slides in all.  The imported Powerpoint slides are the first slide in the project and the final two slides in the project... in between these are recorded slides.
    I am of the opinion that the Powerpoint slides, for whatever reason, are the root of the problem, as I made a copy of this project, removed those three slides from it and the resulting MP4 output ran perfectly.
    Has anyone encountered similar issues and if so, did you find the cause and solution?  Any help will be gratefully accepted

    Did you have the PowerPoint file saved in pptx format?  If so, this would account for it.  Save the file in version 97-2003 of PowerPoint, and it will work.  We just encountered this issue.
    Jennifer S. Lewis, M.Ed.
    LMS Administrator
    www.linkedin.com/in/jenniferastetelewis/

  • Audio and Video Skips While Playing. HELP!

    Whenever I play music or audio on my computer it always skips. This happens much more with music and audio. I have a Realtek HD Audio Sound Driver. I believe it is a latency issue, but am not sure. It is very annoying and slows up the experience of playing music. Please help! My specs are:
    HP 2000-369WM Notebook PC
    Windows 7 SP1 64-bit
    4.0 GB Memory
    AMD E-450 APU with Radeon Graphics 1.65 GHz

    Hi SFleming93, sorry to hear that you are having issues with your sound skipping on your notebook. Have you attempted to updated the sound driver?  If NOT, here is the download for the sound driver from HP.  http://h10025.www1.hp.com/ewfrf/wc/softwareCategory?os=4063&lc=en&cc=us&dlc=en&sw_lang=&product=5171...
    If this does NOT resolve the issue, please let me know and I will be happy  to research the issue in greater detail.
    Thank you.
    Click the “Kudos Thumbs Up" at the bottom of this post to say “Thanks” for helping!
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    W a t e r b o y 71
    I work on behalf of HP

  • Why does movies and videos keep pausing and playing in mozilla 4

    it does this in window 7 mozilla firefox 4 but doesn't do it in internet exployer 9 quite as bad.

    From my own experience recently, I would suspect that the Philips dock is faulty. However, that won't get you very far, so as a method for narrowing down the problem, ask yourself the following:
    Has the iPod/Philips dock combination ever worked?
    How are you connecting the iPod with the dock? Is it the docking connector, a cable, bluetooth?
    How long does it work before it pauses (time it)? Is it the same time each attempt?
    Can you try the iPod with a friend's dock, or can you try the dock with another iPod? What happens?

  • Please help with audio and video not syncing.

    I'm using Encore 3, and have already authored a DVD a month ago without a glitch. The following are the same steps I used, but this time around, the video and audio in Encore are not syncing.
    Here's what I've done.
    1) I export my Final Cut projects to .mov using the following settings (Share > Master File).
    Format: Video and Audio
    Video codec: H.264
    Resolution: 1920x1080
    Audio file format: Quicktime Movie (AAC)
    Include chapter markers: Unchecked
    Roles as: Quicktime Movie
    2) I run the .mov file in Compressor using the "Disc Burning" preset.
    3) I then import the .ac3 and .m2v files that Compressor created into Encore.
    4) In Encore, I select both files and go to New > Timeline.
    In the Timeline window, the durations on both are the same. But I don't understand why the audio and video are not synced when I preview or when I burn a test DVD. The audio comes in just a tad late.
    Video Clip:
    Source In: 00;00;00;00
    Duration: 00;02;33;29
    In-Point: 00;00;00;00
    Out-Point: 00;02;33;29
    Audio Clip:
    Source In: 00;00;00;00
    Duration: 00;02;34;00
    In-Point: 00;00;00;00
    Out-Point: 00;02;34;00
    What's puzzling is that two of the 10 videos I've import to Encore are synced perfectly -- same export settings from FCP, same settings Compressor.
    Please help.
    Thanks!
    Mark

    Hi Mark.
    Do you have any situations where there is more than one video file in a timeline?
    Secondly - why are you using H264 HD files for a DVD? This is using lossy compression to make the H264, which is in turn then scaled & even further bitrate reduced for M2V.
    I would give it a try rendering an SD video file for use in Encore - not the H264 - and starting out with Dolby Digital or LPCM audio, not AAC.
    As with all DVD authoring programs, Encore works best with DVD compliant assets - which you are most definitely using - but I still think you are over-complicating things by using H264/AAC at all.
    Eliminating this may help.

  • Why can't Adobe Premiere Pro CC 2014 Time remap Audio and Video together?

    In case you didn't notice, my question is WHY.  I don't know why Premiere Pro can't do this.  From what I understand at the moment, the only way to time-remap audio in any way shape or form using Adobe software is through Adobe After Effects, which my computer has absolutely no chance of running ever.  I know how to do regular stretching of audio in both Audition and Premiere Pro, but apparently I can't time-remap audio using either of these programs.
    So why can't Adobe Premiere Pro time remap audio along with the video?  What's the reason that it can't?  It's a massive disappointment and would be very impressive to see accomplished in the future.  If it's possible to time remap audio and video together in After Effects, that's great and all, except for the fact that I can't use that program.  Why can't it be done in Premiere Pro and will it ever be possible in Premiere Pro?
    Also, will time remapping audio become possible in Audition someday?

    That sounds like a great idea.  File a Feature Request:
    Adobe - Feature Request/Bug Report Form

  • Why, after three months of apple tv working perfectly fine, is it now cutting out constantly and the audio and video out of sinc?!@

    Why, after three months of apple tv working perfectly fine, is it now cutting out constantly and the audio and video out of sinc?

    Playing rentals, Netflix, from local iTunes, other?
    Firstly restart router and AppleTv after unpowering to see if that helps - may or may not but quick and easy to try.
    Connection via ethernet or wifi?  If wifi are there any new devices in the house which may be causing interference or new neighbouring networks?  If feasible try to eliminate wifi issues by using an ethernet connection.
    AC

  • Why does say"To play the selected item, you must install a later version of the Adobe Flash Player. To download the Adobe Flash Player, go to the Adobe website." when I have the latest Version of it and it's just Black screen with no audio and Video?

    Why does say"To play the selected item, you must install a later version of the Adobe Flash Player. To download the Adobe Flash Player, go to the Adobe website." when I have the latest Version of it and it's just Black screen with no audio and Video? (Powerpoint Presentation 2013)

    You asked your question on the wrong forum. Try one for the Flash Player

  • My synchronized clips (audio and video) have lost their compound clip icon after I bought the full version of FCP X, why is that?

    I have noticed a few changes to my FCP workflow after installing FCPX from the trial version I had before. I've noticed that when I sync audio and video files together via Clip > Synchronize Clips.. the icon at the top left corner of the thumnail is no longer there as it was in the trial version. I also have to right click and select 'open in timeline' to work on the files. I much preferred clicking on the thumnail's icon in the event library and it opening up in the timeline. Also Stabilization is missing from my video effects! How odd.

    I no longer have the trial version this is the point. Bought the 'release' version about 6 weeks ago. Still doesn't explain why the stabilization option randomly appears for some clips and not for others. Also would like to know if I can get the compound icon back on the thumbnails for synchonized clips.

  • Why do my audio and video start in sync, then quickly go out of sync?

    I've just installed Windows 8 and also purchased Premiere Elements 12.
    I've also got Windows movie maker.
    When I play my clips in Premiere Elements, they audio and video start of synced, but quickly go out. This doesn't happen with Windows Movie Maker and I had trialed some NCH video editing software also and didn't have that problem.
    can someone tell me what I need to do to get this working right?

    MASMAS
    The first thing that we need to know are the properties of what you are putting on the Timeline. What works in another software does not necessarily work in Premiere Elements. Each program has its own supported formats.
    a. What is the file extension for this file? .MOV or .MP4?
    b. Does the iPad describe it as 1080p or 720p?
    c. If you open Premiere Elements 12 and go to Edit Menu/Project Settings/General, what do you see for Editing Mode, Timebase, Frame Size, and Pixel Aspect Ratio, even if those field appear to be grayed out.
    Two immediate troubleshooting avenues are going to be in the direction of...
    a. Project settings not set up to match the properties of the source from the iPad. Then we would start a new project and set the project setting manually before importing your video. Details for manually setting the project preset are in the following.
    ATR Premiere Elements Troubleshooting: PE11: Accuracy of Automatic Project Preset (New Project Dialog) Setting
    b. The iPad video being recorded with a variable frame rate instead of a constant one...the remedy then would probably be to take your video in a program like HandBrake to change the variable to a constant frame rate. And after that, import the corrected video into the Premiere Elements project which has the correct project preset (preferably set manual to assure the correct result).
    Please see what you can put together in the way of video details, and we will sort this out.
    Thanks.
    ATR

  • Why do my audio and video get out of synch?

    No matter what sort of video I'm trying to play: Youtube, a movie on DVD, a movie on an external hard drive, etc, after a short time the audio and video get out of synch with each other.  This is often, though not always, signaled by a short audio phrase being repeated (eg: "I don't know, Scully, how about you? about you?").  I can solve the problem by quitting the app and starting it back up but it will eventually screw up again.
    I'm using a MacBook running OS 10.6.8 with a 2.26 GHz Intel Core 2 Duo processor and 4 GB 1067 MHz DDR3 memory.

    MASMAS
    The first thing that we need to know are the properties of what you are putting on the Timeline. What works in another software does not necessarily work in Premiere Elements. Each program has its own supported formats.
    a. What is the file extension for this file? .MOV or .MP4?
    b. Does the iPad describe it as 1080p or 720p?
    c. If you open Premiere Elements 12 and go to Edit Menu/Project Settings/General, what do you see for Editing Mode, Timebase, Frame Size, and Pixel Aspect Ratio, even if those field appear to be grayed out.
    Two immediate troubleshooting avenues are going to be in the direction of...
    a. Project settings not set up to match the properties of the source from the iPad. Then we would start a new project and set the project setting manually before importing your video. Details for manually setting the project preset are in the following.
    ATR Premiere Elements Troubleshooting: PE11: Accuracy of Automatic Project Preset (New Project Dialog) Setting
    b. The iPad video being recorded with a variable frame rate instead of a constant one...the remedy then would probably be to take your video in a program like HandBrake to change the variable to a constant frame rate. And after that, import the corrected video into the Premiere Elements project which has the correct project preset (preferably set manual to assure the correct result).
    Please see what you can put together in the way of video details, and we will sort this out.
    Thanks.
    ATR

  • How do I synch the audio and video to play together in iMovie? And why is it not synched?

    My iMovie the video is not synched to the audio.  It could be about two seconds off.  And sometimes the sound just stops. I tested it on Quick Time Player and burnt it to a dvd and it does the same thing.  The sound then stops halfway through besides my ilife sound effects.  How do I synch the audio and video to play together in iMovie and dvd?  I taped the movie from my digital camera and it hasn't done this on imovie before. Any Help?

    This may help:
    iMovie: Improving audio and video synchronization
    http://support.apple.com/kb/TA25603?viewlocale=en_US

  • Audio and video play intermitently pauses

    the audio and video play will intermitently pause

    Hi @L1215 ,
    Welcome to the HP Forums!
    It is a grand place to find answers and information!
    For you to have the best experience in the HP forum I would like to direct your attention to the HP Forums Guide Learn How to Post and More
    I grasp that after changing the drive to a SSD and installing Windows 8.1 Pro you lost your audio.  Drivers are showing as installed and working properly but you have not audio.
    When I checked the driver page for your notebook I noticed that Windows 8.1 is not a supported Operating System.  With this being said HP does not provide the drivers as it is an untested OS on your system.  OEM's may and sometimes do alter drivers to perform correctly with your system.
    Downloading or Updating Software and Drivers for HP Computers
    Here is a link to No Sound from Speakers (Windows 8) to aid in overcoming this difficulty.
    The best of luck!
    Sparkles1
    I work on behalf of HP
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos, Thumbs Up" on the bottom right to say “Thanks” for helping!

Maybe you are looking for

  • I need help with Applets and Multithreading

    [hello all.  first time poster. big fan of java.] now to the important matter: Applets and Threads ======================================= 1) I have an applet with that implements the runnable interface, and has one thread (and a simple animation). I

  • Wildcards in classpath

    Hi, I am trying to deploy an application with a 3rd party API which has 10 .jar files. Is there a way I can use wildcards to specify these 10 .jar files? Basically I need to add all the .jar files from the main application folder to the classpath. I

  • Quantum server auto-pauses live TV!

    My shiny new VMS1100 freezes after showing an HD channel for an hour or so. Pressing Play on the remote has no effect, but changing the channel fixes everything. I haven't seen this problem with a recorded program, only live TV. Has anyone else seen

  • Publish a Captivate project for screen in movie theater

    Hi, I was asked to develop a software demo animation (approximately 3min) that will eventually be viewed on a big screen in a movie theater. Of course the aim is to have a perfect image quality as possible. Is Captivate a good medium to create such a

  • After my last update, plug-ins are blocked..how do I resolve this?

    Since the last "update" I keep getting the Plug-in blocked message and can't use the "back" function on many others.  How do I correct this problem?