Why is audio distorted and pulses after I import from Adobe Organizer to Adobe Premiere Elements 11

All the videoes I have collected this year from my iphone video, sony video camera an fuji water video camera work fine in the Adobe organizer but when I import to Adobe Premiere Elements 11 after a couple of clips max four the audio distorts and pulsates. I just purchased the software and have updated all the software. Thank you in advance I am so frustrated I feel I tried everything.

1st, Iphone won't easily edit http://forums.adobe.com/thread/881246
-and http://forums.adobe.com/thread/1011411?tstart=0
-and a fix http://forums.adobe.com/thread/934466
2nd, What are you editing, and does your project match your video?
Read Bill Hunt on a file type as WRAPPER http://forums.adobe.com/thread/440037
What is a CODEC... a Primer http://forums.adobe.com/thread/546811
What CODEC is INSIDE that file? http://forums.adobe.com/thread/440037
Report back with the codec details of your file, use the programs below... a screen shot works well to SHOW people what you are doing
http://forums.adobe.com/thread/592070?tstart=30
For PC http://mediainfo.sourceforge.net/en or http://www.headbands.com/gspot/

Similar Messages

Why CD audio reproduction stop working after about 20 minutes

Why CD audio reproduction stop working after about 20 minutes.
The energy saving options seem to be ok

Welcome to Apple Support Communities marimonf. We are sorry you are having problems with what sounds like you burning a CD. These documents may provide some useful information:
iTunes 12 for Mac: If you have trouble burning a disc
iTunes 12 for Mac: Burn settings
iTunes 12 for Mac: Create your own CDs and DVDs

Extreme Audio Distortion and Loudness occurs randomly...

Extreme Audio Distortion and Loudness occurs randomly...when I open an old FCP project.
There seems to be no logic behind when it happens.
And the audio was fine the last time the project was saved...
Anyone know why this happens, I feel like I'm the only one who might have this issue

No you are not the only one.
Do a search in this forum.
But I haven't it seen reported for the last few months, so maybe this solved with some update.
If the search does no help you, you need to give us some more information about the specs of the audio/movie files, sequence settings etc. And on the versions of FCP OSX and Qicktime, as well as information about how the audio is coming from the speakers (internal audio, AJA or Blackmagic card, etc)
Rienk

Why capital letters change in lower after copying them from a PDF document, or otherwise, why some uppercase are in fact lowercase when I look in the Text Property in any PDF Reader.

Why capital letters change in lower after copying them from a PDF document (Made by InDesign), or otherwise, why some uppercase are in fact lowercase when I look in the Text Property in any PDF Reader.

your home page to get into your Web site should be index.html (for Mac) or index.htm (on PC)
You can name it something other than index, but will be harder to find. when you create the subjects and link to them, they can can be named anything with the html extension Or if your using PHP end in .php. There is a Microsoft type asp or aspx but your hosting service has to set up using windows server system.
My hosting service use a Linux server normally but can convert Windows for a Fee. UNIX Linux has no concept of asp or aspx.
See this : https://skitch.com/pjonescet/8mnnx/dreamweaver

Why bookmarks have 4 spaces added after the update from FF3.6 to 13?

Why bookmarks have 4 spaces added after the update from FF3.6 to 13?

Problems with bookmarks and history not working properly can be caused by a corrupted places.sqlite database file.
*http://kb.mozillazine.org/Bookmarks_history_and_toolbar_buttons_not_working_-_Firefox
*https://support.mozilla.org/kb/Bookmarks+not+saved#w_fix-the-bookmarks-file
You can also try to repair the places database with this extension:
*https://addons.mozilla.org/firefox/addon/places-maintenance/

Why won't Aperture 2 support RAW files imported from Canon 60D when it does from my Olympus DSLR?

Why won't Aperture 2 support RAW files imported from Canon 60D when it does from my Olympus DSLR?

I'm afriad the fact that your Olympus dSLR is supported is no relevance.
The Raw from every model of camera is different. Note: that's every model not every brand. So, the NEF produced by a Nikon D40 is not the same as the NEF produced by a D60, the CR2 produced by a Canon 350 is not the same as the CR2 produced by a Canon 400.
Support for individual camera models has to be added one by one, and Apple will update the OS to work with the most recent version of the software. That's an incentive for you to keep up-to-date. So, for support for your 60D you'll need 10.6.5 plus Aperture 3 and/or iPhoto 11.
Regards
TD

Premiere Elements 13 issue with the mouse on When I select a clip of video and move to a different place in my time line, Premiere Elements 13, will not release the clip rom the mouse. The clip follows my mouse movements and goes to other places in my

Premiere Elements 13 issue with the mouse on MAC OSX Yosemite 10.10.1
When I select a clip of video and move to a different place in my time line, Premiere Elements 13, will not release the clip from the mouse.
The clip follows my mouse movements and goes to other places in my time line.
I try to delete these extra insertions, but the mouse will not release the clip.
Action I’ve taken: I’ve re-installed Premiere Elements 13. Problem remains.
This issue has consumed too much of my time and does not go away. It ruins my video.
Help please.
Thanks

I tried using the Guest Account on my Mac. In the Guest Account, Illustrator works perfect!
Then I started wondering what processes (tools/tweaks) I run by default on my account. Turned out the problem was called by a little background tool called RightZoom. RightZoom let's the green 'zoom' button always maximize your current window.
So thanks! Problem solved!

Audio distortion and clipping from imported AVCHD

I just built a new computer that works great for video and is now playing back AVCHD no problem.
The sound however, is the same as before. It sounds like really really bad over clipping, straight from the RAW imported video... Sounds fine on the camera and it sounds fine in my Sony Content Management Utility... But in premiere and sound booth... it's not working.
It was also the same problem on my other computer even though I had a $4000 AD/DA converter that can go up to 24bit 192khz and I'd used programs such as Nuendo and Cubase with no problem, even at 32-bit float... (Audio and Music is my primary)
Interesting thing is, this is also happening in Soundbooth
Ideas?
Problem existed on both:
Windows 7 and Windows XP Pro SP3

Got it! How did I not see think of this before!
Tried a different format on the Sony HXR-NX5U, Dolby Stereo. And it works.
What I was using before as a LPCM (L for Linear, it's a lossless codec) Codec format which I gues premiere does not like.
Adobe Premiere would probable recognize PCM because it is Non Linear Quantized and older format and it explains why LPCM was distorting - becuase it's on a wider linear scale that exceeds what Premiere supports - it was still seing the PCM part of the code but not that it was Linear.
The audio nerd prevails.
*edit*
Huh, well I don't see PCM nor LPCM in supported audio formats.

Thunderbolt audio distortion and slow Pegasus Raid Speeds

Having major problems with my MBP 17" and my thunderbolt set up. (MBP 17" 2.3 i7 quad core, (2) 27" thunderbolt displays, Pegasus R6 12TB Raid, Blackmagic Ultra Studio Pro 3D)
Apple states this clearly on there website that it is possible with this exact set up.
Issues: With all 4 devices plugged in the Raid speed goes from about 515mb/sec write to 166mb/sec write speed.
With one thunderbolt display, raid, and blackmagic I get around 460mb/sec. As soon as the second display is added to the mix the speed drops off considerably.
After Effects and Davinci Resolve color correction software cannot get sync on the Blackmagic box. Final Cut works ok.
The other really big problem is that when you do any kind of data transfer across the thunderbolt line, I cant get audio to play back for more than a few seconds. I get distortion and static in the line. I have tried the thunderbolt audio from the monitors and the Blackmagic box.
The most curious thing is that it all works on the 13" MBP. The write speed goes to 225mb/sec with everything plugged in, however it must be enough, because the audio doesnt distort and I can get sync on my color correction monitor out of the Blackmagic box.
I also tried a brand new 17" MBP 2.5 i7. I still get the same problem. It is like there is something wrong with the 17".
I have contacted Pegasus and Blackmagic. Pegasus said that they now know about it and are working with Apple.
Does anyone else have this set up and are you experiencing the same problems? Please feel free to respond with any questions. I wouldl love to hear from Apple regarding this matter. Seems like a big problem.
(other items testing)
-Switched video card to not auto switch. just use high performance.
-Went to Apple, bought a brand new 17" 2.5, stock. tested it. same exact results.
-Moved all the items around in the daisy chain to see if one item has to be first. No luck.
-Laptop monitor open and closed, same result.
-Reinstall OS.
-Brand new motherboard.
-New hard drive
-New RAM
No luck again.

This is not a surprise. Apple's software RAID is slow. The best option for using Apple's software RAID is to use a regular disk for your audio files and keep the backup copy on a RAID. Also, depending on how important those files are, you might also want to keep an off-site backup copy because fires, floods, and thefts do occur.

T410 Bluetooth audio distorted and delayed

Hi everyone, When I connect my laptop to my speakers through bluetooth, the audio gets distorted (the pitch is unusually low) and delayed. I have a ThinkPad Bluetooth 2.1 with enhanced data rate II, and the operating system is Windows 7. I have installed the latest drivers and the speakers work well with bluetooth when connected to other devices. Has anyone got an idea what this could be and how it could be solved? Best,Lambj

I am having a similar problem when using my Motrola S305 bluetooth headphones to listen to music files. The audio is garbled/distorted and I can't seem to adjust by lowering volume (either on the BB or the headphones). Phone call audio through the headphones is perfect, and the music audio is pretty good through the BB's speaker. It's odd, but I didn't have this problem on the Tour 9630 (using the same Motorola headphones).
Has anybody had similar problems with the Motrola S305 headphones? I did not see it on RIM's list of "compatible" headphones. Maybe these issues can be addressed with an OS update?

After I import from my camera, my pictures are not showing up in my events. But I can find them in Last 12 months. Any ideas why??

After I import my pictures to iphoto, I can't see them in my events. I can find them in last import or last 12 months. Why did my pictures stop showing up in events???

They have not - your events are sorted manually - go to the view menu ==> sort events and select your choice of event sort order
LN

How to fix skewed table columns and rows after re-import XML

My question is regarding XML Import in InDesign CS3.
I have a XML that has a table of 5 columns and 5 rows, when I import it into InDesign, the table shows up fine with 5 columns and 5 rows. However when I revise my table to have an additional column, and re-import the XML file, the table gets updated, but instead of with an additional column, it gets 'appended' with an additional row instead (InDesign seems to blindly replace each cell from left to right, top to bottom, and ends up with 6 rows instead). The XML file specifies the number of columns and rows (5 and 5 before, 5 and 6 after), why doesn't InDesign recognize it and automatically add a new column when I re-import the file? Is this problem fixed in CS5.5? Is there a script to fix this?
Here is an example of my old XML vs new XML:
Old:
<frame5>
<Table xmlns:aid="http://ns.adobe.com/AdobeInDesign/4.0/" aid:table="table" aid:trows="5" aid:tcols="5">
<Cell aid:table="cell" aid:crows="1" aid:ccols="1"></Cell>
<Cell aid:table="cell" aid:crows="1" aid:ccols="1">2006</Cell>
<Cell aid:table="cell" aid:crows="1" aid:ccols="1">2005</Cell>
<Cell aid:table="cell" aid:crows="1" aid:ccols="1">2004</Cell>
<Cell aid:table="cell" aid:crows="1" aid:ccols="1">2003</Cell>
<Cell aid:table="cell" aid:crows="1" aid:ccols="1">Stores at beginning of period</Cell>
<Cell aid:table="cell" aid:crows="1" aid:ccols="1">846</Cell>
<Cell aid:table="cell" aid:crows="1" aid:ccols="1">805</Cell>
<Cell aid:table="cell" aid:crows="1" aid:ccols="1">753</Cell>
<Cell aid:table="cell" aid:crows="1" aid:ccols="1">678</Cell>
<Cell aid:table="cell" aid:crows="1" aid:ccols="1">Stores opened during the period</Cell>
<Cell aid:table="cell" aid:crows="1" aid:ccols="1">36</Cell>
<Cell aid:table="cell" aid:crows="1" aid:ccols="1">50</Cell>
<Cell aid:table="cell" aid:crows="1" aid:ccols="1">59</Cell>
<Cell aid:table="cell" aid:crows="1" aid:ccols="1">79</Cell>
<Cell aid:table="cell" aid:crows="1" aid:ccols="1">Stores closed during the period</Cell>
<Cell aid:table="cell" aid:crows="1" aid:ccols="1">13</Cell>
<Cell aid:table="cell" aid:crows="1" aid:ccols="1">9</Cell>
<Cell aid:table="cell" aid:crows="1" aid:ccols="1">7</Cell>
<Cell aid:table="cell" aid:crows="1" aid:ccols="1">4</Cell>
<Cell aid:table="cell" aid:crows="1" aid:ccols="1">Total stores at end of period</Cell>
<Cell aid:table="cell" aid:crows="1" aid:ccols="1">869</Cell>
<Cell aid:table="cell" aid:crows="1" aid:ccols="1">846</Cell>
<Cell aid:table="cell" aid:crows="1" aid:ccols="1">805</Cell>
<Cell aid:table="cell" aid:crows="1" aid:ccols="1">753</Cell>
</Table>
</frame5>
New:
<frame5>
<Table xmlns:aid="http://ns.adobe.com/AdobeInDesign/4.0/"
xmlns:aid5="http://ns.adobe.com/AdobeInDesign/5.0/" aid:table="table" aid:trows="5" aid:tcols="6">
<Cell aid:table="cell" aid:crows="1" aid:ccols="1"></Cell>
<Cell aid:table="cell" aid:crows="1" aid:ccols="1">2007</Cell>
<Cell aid:table="cell" aid:crows="1" aid:ccols="1">2006</Cell>
<Cell aid:table="cell" aid:crows="1" aid:ccols="1">2005</Cell>
<Cell aid:table="cell" aid:crows="1" aid:ccols="1">2004</Cell>
<Cell aid:table="cell" aid:crows="1" aid:ccols="1">2003</Cell>
<Cell aid:table="cell" aid:crows="1" aid:ccols="1">Stores at beginning of period</Cell>
<Cell aid:table="cell" aid:crows="1" aid:ccols="1">123</Cell>
<Cell aid:table="cell" aid:crows="1" aid:ccols="1">846</Cell>
<Cell aid:table="cell" aid:crows="1" aid:ccols="1">805</Cell>
<Cell aid:table="cell" aid:crows="1" aid:ccols="1">753</Cell>
<Cell aid:table="cell" aid:crows="1" aid:ccols="1">678</Cell>
<Cell aid:table="cell" aid:crows="1" aid:ccols="1">Stores opened during the period</Cell>
<Cell aid:table="cell" aid:crows="1" aid:ccols="1">456</Cell>
<Cell aid:table="cell" aid:crows="1" aid:ccols="1">36</Cell>
<Cell aid:table="cell" aid:crows="1" aid:ccols="1">50</Cell>
<Cell aid:table="cell" aid:crows="1" aid:ccols="1">59</Cell>
<Cell aid:table="cell" aid:crows="1" aid:ccols="1">79</Cell>
<Cell aid:table="cell" aid:crows="1" aid:ccols="1">Stores closed during the period</Cell>
<Cell aid:table="cell" aid:crows="1" aid:ccols="1">789</Cell>
<Cell aid:table="cell" aid:crows="1" aid:ccols="1">13</Cell>
<Cell aid:table="cell" aid:crows="1" aid:ccols="1">9</Cell>
<Cell aid:table="cell" aid:crows="1" aid:ccols="1">7</Cell>
<Cell aid:table="cell" aid:crows="1" aid:ccols="1">4</Cell>
<Cell aid:table="cell" aid:crows="1" aid:ccols="1">Total stores at end of period</Cell>
<Cell aid:table="cell" aid:crows="1" aid:ccols="1">1368</Cell>
<Cell aid:table="cell" aid:crows="1" aid:ccols="1">869</Cell>
<Cell aid:table="cell" aid:crows="1" aid:ccols="1">846</Cell>
<Cell aid:table="cell" aid:crows="1" aid:ccols="1">805</Cell>
<Cell aid:table="cell" aid:crows="1" aid:ccols="1">753</Cell>
</Table>
</frame5>

What I mean is, right now there is a "workaround" which requires a user to manually add an extra column before re-importing the XML (with an extra column), otherwise the results get skewed. If by providing a script we can simply ask the user to "run" it, it would be a more "acceptable" solution.
Right. So, one solution would be to use Convert Text to Tables. If you find that works for you, then you can script it.
That's why I asked you...
Of course if nothing is required from the user other than simply re-importing, then that would be the best solution.
Well, one could imagine a script that was attached to the re-import command, or to the link update notification, but probably the first step is to get something that works reasonably well without automating it completely. Especially because triggers to run scripts silently can introduce hard-to-debug problems.
Sure we can switch to use "CALS table and see if this works. The question is, why should we need to? In the 2nd XML there is clearly a different "aid:tcols" value, and yet InDesign seems to ignore it and assume the same # of columns? This sounds like an Indesign bug, can someone confirm? Is there any plans to fix this?
Not to be snarky, but do you want it to work or not? There are the tools you have and the tools you wish you had, and you can't really do much with the ones you wish you had. I'm kind of assuming you are looking for a solution today, not a solution in 2013.
Yes, I believe two of us have confirmed this appears to be a bug.
Plans to fix? Well, we can't really tell you. You could try asking Adobe, but that's not easy information to get out. But you can certainly open a support case at http://adobe.com/go/supportportal and ask. It's not like we have special information here...
But you're probably better off filing a bug first, in that same fashion.
But let's assume no one had filed the bug. CS6 is expected in the March/April 2012 timeframe. That means that they're probably just putting the finishing touches on it right now, and it's going to be very difficult to fix things in it now. So then the earliest you'd likely get it fixed in CS6.5/CS7/whatever which presumably comes out by 2Q2013, and that's assuming Adobe decides to fix it...
I also can't find much documentation on how to update my table to a "CALS table", any examples?
Try this thread:
Re: Importing a CALS table into InDesign CS3

How can I retrieve my photos and videos after pressing 'delete from everywhere' accidentally on my iPhone 4s?

Hello all,
So I was organising my photos and videos on my iPhone 4s and wanted to delete them from my camera roll once I had moved them to new folders. When I tried to delete them from my camera roll it asked if I wanted to 'delete from everywhere'. Not knowing what this button did I pressed it and have now lost all the copies of those photos and videos I had taken!!!
Is there any way of retrieving them off of my iPhone? Is there like a recycle bin type folder where all the deleted data has gone to from where I can recover it?
Hope someone can help.
Thank you

Your backup contains photos and videos from the camera roll, if you did not sync after that, use the latest backup to restore from: iTunes: About iOS backups and Backing Up, updating, and restoring your iPhone and iPod touch software

Why is draw table empty after i import from memory id 'SAP_APPLICATION' ?

Hello,
I have the following
data draw like draw.
data intdraz like draz occurs 0 with header line.
import draw
intdraz
from memory id 'SAP_APPICATION'
at this point draw table is empty and does not contain the information of the selected file, so basically
draw-DOKAR
draw-DOKNR
draw-DOKTL
draw-DOKVR
are all empty.
does anyone know why this is happening ?
thank you

Hi Rushikesh,
Dynamic table i have created with same structure as of internal table which is getting exported....
thats why i m surprised how come structure mismatch.....i have checked in debugger, structure is same.....for both the tables,
Can you/anyone give any example of Exporting internal table to MEMORY ID and getting it back (IMPORT) into dynamic internal table of same structure...
Regards
Munish Garg
Edited by: MunishGarg on Feb 16, 2010 11:36 AM

Problem with fan, temperature and battery after the restore from the stop (Macbook pro 15)

From a couple of weeks my macbook pro (15" 2.4 Ghz i7 4gb OS X 10.7.4) has this problem: when i close the screen it goes to stop and when i open it goes out the stop normaly but the fan and the temperature increase and the battery last nothing. So i reboot the mac and everithings go to normal way and also battery time increase in comparison with before...

I've found that samsung kies wifi started at the login and that the app used 91% of my cpu and filled up my ram so i went to: system preference > users and groups > login's elements > and i deleted the app from the list.

Why is audio distorted and pulses after I import from Adobe Organizer to Adobe Premiere Elements 11

Similar Messages

Maybe you are looking for