Why is Audio screeching and video choppy?

Greetings. I have recently formated my toshiba latop with windows xp and have no problems playing audio or video from non-flash sources, I installed version 10.1.85.3 of flash. And even tried a couple of older versions. I have used firefox, chrome and IE, all with no success. All i get is a choppy video with high pitched sceeching for audio.  Any help would be greatly appreciated.

Thanks. The Windows Firewall would not cause any issue. AVG can, but it would not be the main anti-virus engine which is the Resident Shield.  That could block an Install of Flash Player, but evidently it didn't. What can cause problems are the following which I'll post in a minute.
Malwarebytes that you use, is it the Free version that is on your Desktop and you run it on demand? If so that is not a problem either. Now if it is the full version and Installed and runs in realtime, it may conflict with AVG.
These are the AVG add ons and the LinkScanner that you may try to Disable and see if there is any improvement.
LinkScanner
Open AVG User Interface.(Right Click to Open)
Double-click on the LinkScanner.
Un-tick the option Enable AVG Search-Shield and Enable Active Surf-Shield.
Save the changes.
Add Ons  Disable:
AVG SafeSearch 
AVG Security Toolbar
AVG Security Toolbar BHO
Thanks,
eidnolb

Similar Messages

  • Why the audio of my video in my itunes is not playing when i fullscreen it? :( HElp me please..

    why the audio of my video in my itunes is not playing when i fullscreen it? HElp me please..

    Hi eversonjm,
    Thanks for using Apple Support Communities.  If you are out of authorizations but only have 1 computer, deauthorizing all computers and reauthorizing your correct computer might be a good idea.  See this article for instructions:
    iTunes Store: About authorization and deauthorization
    http://support.apple.com/kb/ht1420
    If after deauthorizing and reauthorizing your computer, you are still not authorized for the 96 songs, this article has some steps for seeing the account name that was used to purchase a song, in the event that a different account may have been used:
    Recovering a forgotten iTunes Store account name
    http://support.apple.com/kb/ht1920
    Cheers,
    - Ari

  • Audio Messages and Video

    I was excited to see that you could finally send audio messages and videos.....but when I realized that you can only use this feature when you are talking to someone else who has an iPhone...it peeved me. I was trying to understand why I was not seeing the microphone feature to the right, as in the "Tips" app. Hope this is not the case. Anyone noticing the same?

    Well, I just checked on my device, and it appears that the mic does not appear if I try a contact that does not have an iPhone. You could check the user guide here http://manuals.info.apple.com/MANUALS/1000/MA1565/en_US/iphone_user_guide.pdf  and see if it provides any further information.

  • How to synchronize audio track and video when transmitting by RTP

    since the audio stream and video stream are transmitted separately on the network even if in a merged data, how to synchronize the audio stream and video stream at the receiving end ?

    camelstrike wrote:
    Hi everyone!
    I've tried to make one of the processors, processor1, control the other processor, processor2, with processor1.addController(processor2) but I get a
    javax.media.IncompatibleTimeBaseException. I need to synchronize audio and video rtp-streams because they are sometimes completely out of sync.
    In JMF API Guide I've read:
    "2. Determine which Player object's time base is going to be used to drive
    the other Player objects and set the time base for the synchronized
    Player objects. Not all Player objects can assume a new time base.
    For example, if one of the Player objects you want to synchronize has
    a *push-data-source*, that Player object's time base must be used to
    drive the other Player objects."
    I'm using a custom AVReceive3 to receive rtp-streams and then I create processors for the incoming stream's datasource's, and they are ALL PushBufferDataSource's.
    Does this mean I can't synchronize these. If so is there any way I can change them into Pull...DataSources ?The RTP packets are timestamped when they leave, and they are played in order. You can't change the timebase on an RTP stream because, for all intensive purposes, it's "live" data. It plays at the speed the transmitting RTP server wants it to play, and it never gets behind because it drops out of order and old data packets.
    If your RTP streams aren't synced correctly on the receiving end, it means they aren't being synced on the transmitting end...so you should look into the other side of the equation.

  • Multimedia Audio Controller, and Video Controller(VGA compatible) are missing on Windows XP(32Bit) SP3

    Hi.
    My Desktop Computer(Intel P 4, 512MB of RAM, and Graphics Card  with 256MB of RAM)
    Also, My Desktop Computer with P 4 doesn't have any access internet since there is no network adapter is installed. As a result, I would not be able to run the pc scan utility, or  Reader a web-based applet that identifies my GPU or Audio controller
    and finds the latest graphics driver for my GPU, and Audio.
    I have two Windows XP installations:
    Windows XP SP2(32Bit) which is old and it seems it infected by some viruses.
    I have installed another fresh clean Windows XP(32Bit) SP3. However, I have two devices not detected well by Windows XP.
    First of all, when saying that I have multi-operationgs systems, I mean there are two operating systems installed on my PC(SP2, SP3) both are 32Bit. The first Windows SP2(NOT installed by me) has all multimedia audio card installed well,
    and has SCSI and RAID Host Controller shown the device manager. However, only the VGA is not installed on Windows SP2. However, the second one Windows SP3(Installed by me) has VGA not installed, Multimedia audio NOT installed, and there is no SCSI and RAID
    Host Controller in device manager.
    First:  Yes, my motherboard has integrated video, and integrated audio card
    According to the screen shots above, then
    The vendor ID of Multimedia Audio Controller  is 8086 and the device ID is
    24D5.
    The vendor ID of Video Controller  is 8086 and the device ID is
    2572.
    I AM EXPECTING THAT KNOWING THE VENDOR ID AND THE DEVICE ID WILL LET ME QUICKLY FIND THE APPROPRIATE  DRIVER. HOWEVER, I COULDN'T FIND THE APPROPRIATE DRIVER.
    Thus, could you please help me to find them?
    I have tried installing a soundMAX card  driver, however, I found this error.
    I have checked the other Windows XP SP2(32Bit) which is oder installed, and it seems it infected by some viruses.
    However, the Multimedia Audio on that Windows is installed well. As here: I only posted these screen shots to show what kind of device is Multimedia Audio Card
    The motherboard model is:
    Belarc Advisor Computer Profile
    Operating
    System
    System
    Model
    Windows XP Professional
    Service Pack 3 (build 2600)
    Install Language: English (United
    States)
    System Locale: Arabic (Yemen)
    Installed: 22/03/2013 12:03:16
    ص
    Boot Mode: BIOS (Secure
    Boot not supported)
    Enclosure Type:
    Desktop
    Processor
    <sup>a</sup>
    Main Circuit Board
    <sup>b</sup>
    3.00 gigahertz Intel Pentium
    4
    16 kilobyte primary memory cache
    1024 kilobyte secondary memory
    cache
    64-bit ready
    Hyper-threaded (2 total)
    Board: 775i65G.
    Bus
    Clock: 200 megahertz
    BIOS: American Megatrends Inc. P3.00
    03/20/2007
    Drives
    Memory Modules
    <sup>c,d</sup>
    39.99 Gigabytes
    Usable Hard Drive Capacity
    29.48 Gigabytes Hard Drive Free
    Space
    COMPAQ CD-ROM LTN486S [Optical drive]
    3.5" format removeable
    media [Floppy drive]
    WDC WD400BB-75DEA0 [Hard drive] (40.00 GB) -- drive
    0, rev 05.03E05, SMART Status:
    Healthy
    504 Megabytes Usable
    Installed Memory
    Slot 'DIMM0' has 512 MB
    Slot 'DIMM1' is
    Empty
    Local Drive
    Volumes
    c: (NTFS on drive 0) *
    20.98 GB
    14.16 GB free
    d: (NTFS on drive 0)
    19.01 GB
    15.33 GB free
    <center>
    * Operating System is installed on
    c:
    </center>
    Network
    Drives
    None
    discovered
    Users
    <small>(mouse over user name for details)</small>
    Printers
    local user
    accounts
    last logon
    عايض
    لرضي
    19/01/2015 10:59:17 م
    (admin)
    local system
    accounts
    Administrator
    never
    (admin)
    Guest
    never
    HelpAssistant
    never
    SUPPORT_388945a0
    never
    <center>Marks
    a disabled account;   Marks
    a locked account </center>
    Controllers
    Display
    Standard floppy disk
    controller
    Intel(R) 82801EB Ultra ATA Storage Controllers
    Primary IDE
    Channel [Controller]
    Secondary IDE Channel [Controller]
    None
    discovered
    Bus
    Adapters
    Multimedia
    Intel(R) 82801EB USB
    Universal Host Controller - 24D2
    Intel(R) 82801EB USB Universal Host
    Controller - 24D4
    Intel(R) 82801EB USB Universal Host Controller -
    24D7
    Intel(R) 82801EB USB Universal Host Controller - 24DE
    Intel(R)
    82801EB USB2 Enhanced Host Controller - 24DD
    None
    discovered
    Virus
    Protection <small>[Back to Top]</small>
    Group
    Policies
    Norton AntiVirus Version 18.1.0.37
        Virus Definitions Version Not Up To Date
        Realtime File Scanning
    On
    None
    discovered
    Communications
    Other
    Devices
    ↓ Realtek RTL8139 Family PCI Fast
    Ethernet NIC
    Status:
    Cable unplugged
    Dhcp Server:
    none responded
    Physical Address:
    00:19:66:1F:F7:54
    USB Human Interface
    Device
    Standard 101/102-Key or Microsoft Natural PS/2
    Keyboard
    HID-compliant mouse
    USB Root Hub (5x)
    USB Storage Use in past 30 Days<small>(mouse
    over last used for details)</small>
    Hosted Virtual Machines<small> (mouse over
    name for details)</small>
    Last
    Used
    SanDisk Cruzer Blade, s/n
    4C532000020502112303, rev 2.01
    19/01/2015
    09:32:57 م*
    USB 2.0 USB Flash Drive, s/n
    59309e92e21612, rev 0.00
    09/01/2015
    12:29:17 ص*
    <center>* Possibly used again before the reboot following this
    time.</center>
    None
    discovered
    See your entire
    network map...
    click for Belarc's System Management products
    A man should convert his anger and sadness into strength to continue living in this life.

    Dont worry, dont think anyone was as a matter of fact
    http://forums.creative.com/creativelabs/board/message?board.id=soundblaster&message.id=908&jump= true#M908
    http://support.microsoft.com/default.aspx?scid=kb;en-us;80509
    http://support.microsoft.com/default.aspx?scid=kb;en-us;84567
    that worked for me, maybe it will help someone else that went through what i did, its a miracle i did not top myself after going through all this BS. ALSO dont threaten your computer with violence, cos it will always call your bluff which makes things worse

  • Screen Share, Audio Chat and Video Chat not working

    Hey everyone.
    I recently started having issues with using some of the iChat protocols over AIM with a friend of mine.
    I can send IMs and files perfectly, but I can't get Audio Chat, Video Chat or even Screen Sharing (both ways) to work. After a while I get: "Failed to start Screen Sharing because: Screen Sharing could not be established." I also get the exact same message when trying to Audio chat or Video chat.
    If anyone knows the answer to this problem please help us...
    Thanks in advance
    DJ Schep

    Is this with a Speedtouch ?
    Is this you http://discussions.apple.com/thread.jspa?threadID=1668357 ?
    11:48 PM Monday; August 18, 2008

  • Why is audio  distorted and pulses after I import from Adobe Organizer to Adobe Premiere Elements 11

    All the videoes I have collected this year from my iphone video, sony  video camera an fuji water video camera work fine in the Adobe organizer but when I import to Adobe Premiere Elements 11 after a couple of clips max four the audio distorts and pulsates. I just purchased the software and have updated all the software. Thank you in advance I am so frustrated I feel I tried everything. 

    1st, Iphone won't easily edit http://forums.adobe.com/thread/881246
    -and http://forums.adobe.com/thread/1011411?tstart=0
    -and a fix http://forums.adobe.com/thread/934466
    2nd, What are you editing, and does your project match your video?
    Read Bill Hunt on a file type as WRAPPER http://forums.adobe.com/thread/440037
    What is a CODEC... a Primer http://forums.adobe.com/thread/546811
    What CODEC is INSIDE that file? http://forums.adobe.com/thread/440037
    Report back with the codec details of your file, use the programs below... a screen shot works well to SHOW people what you are doing
    http://forums.adobe.com/thread/592070?tstart=30
    For PC http://mediainfo.sourceforge.net/en or http://www.headbands.com/gspot/

  • Flash player audio chirps and video delays

    When playing recorded videos the audio "chirps" and sounds
    like a tape deck with the speed varying. The video is anywhere from
    1 to 3 seconds behind the audio.

    Found this in Techsmith's Camtasia forum, dated 1-10-08,
    posted by one of the Camtasia developers:
    "We've also been working with Adobe Flash Player TechSupport,
    who has been very responsive and helpful. They have confirmed the
    bug, and escalated it as a high priority issue to their engineers.
    We're hoping that it can be fixed in a future version of the Flash
    Player."
    FWIW.

  • How to add Audio Formats and Video Formats in one movie?

    Now that FCP X will not allow different settings how would I change the Audio Format and the Video Format to one movie in Compressor 4?
    When I change the Audio to ACC I have a sound file and when I change the Video Format to HD 720 I get the movie but with the original sound.
    Any help is always appreciated.

    Sorry for this one also.  Just finally searched the Inspector windoe in Compressor 4.  It is already there.

  • IMovie to iDVD-audio, slides and videos stuff up

    Possess a Powerbook G4, DVD burner.
    Did a project using clips and video clips. Share it with iDVD. Tried previewing it.
    Audio plays and stops intermittently. Clips do not move and show sequentially. Audio keeps playing and stopping intermittently but clips and videos did not play as sequenced in iMovie.

    thanks, it did work later. Now there is problem with
    opening it after being burnt onto a disc. I tried
    opening it but there was a message that says
    "An error occurred while loading the project. This
    project seems to be write-protected and cannot be
    opened."
    what happened?
    What are you trying to open?
    If you are able to burn the disc, you surely had the project open.

  • Audio buzz and video cut-out caused by volume shadow service errors during updates and other services that create shadow copies

    I have this issue and see throughout the Internet that my problem is shared by large numbers of other Windows 7 users, and a few Windows 8 users.
    I also see that Microsoft has not addressed the issue.
    I've been troubleshooting the problem for 13 months and across 3 separate hard drives on 2 separate computers, with the help of tech escalation from both Carbonite and Dell (whom I wanted to eliminate as causes, and who have been kind enough to assist even
    after being eliminated as causes because they evidently care about customer service).
    Over 13 months we have run system diagnostics, reinstalls and repairs to no avail.  We have been able to reproduce the event in the absence of every attached device, every installed program, every subscribed service, and every hardware type and configuration. 
    We have visited chat rooms showing that this is a widespread problem (e.g., http://superuser.com/questions/630033/audio-video-glitch-when-shadow-copy-service-starts), and that even professional server administrators simply consign themselves to VSS being "the
    bane of backup software" (http://community.spiceworks.com/topic/229743-problem-with-vss-writer-system-writer-timed-out).
    Yet regardless of the computer or the configuration, the problem persists.  It causes characteristic and alarming disk write error and memory spikes on the Resource Monitor that can be traced to huge numbers on the System 4 and VSSVC.exe processes, occurring
    every time the Volume Shadow Copy Service and Application Experience create a restore point during an automatic update of Adobe, antivirus, etc.; and one can even provoke an event simply by manually creating a restore point, which has the bonus of triggering
    an 8220 notice that the Volume Shadow Service has run out of time while deleting files.  And the only advice I've seen from MS is that this is a "normal condition."
    It is not normal to be unable to enjoy audio and video.  And it is certainly not normal for one's PC to continually degrade with every update until it becomes unable to update and must be replaced. 
    I am on my 3rd computer with this problem (different type and configuration each time), and Dell has offered me an upgrade to Windows 8 in the hopes that the problem will not recur there.  But I see from Microsoft's tech chat that Windows 8 users are reporting
    the problem as well (http://answers.microsoft.com/en-us/windows/forum/windows_8-pictures/after-upgrading-to-windows-8-pro-there-is-an/813432c2-14f1-463f-bba3-ad322ceb6e00).
    Please, please post a real answer to this problem.  Thank you.

    Hi,
    Above all I understand the frustration as a same issue persists for a very long time.
    At first I'm thinking if it is directly related to the application CrashPlan some customers mentioned in one of the threads you provided. However I then noticed that you said it could be also reproduced by creating a System Restore point.
    Currently I cannot find a Windows 7 system so I used a Windows 8.1 laptop (also Dell) for testing.
    I tried to play an online video and also a local video with creating a restore point in the middle. However I failed to reproduce the same behavior. 
    The following screenshot was captured in second test (play a local video):
    I cannot confirm if it is because we have a large physical memory (8GB), or Windows 8.1 resolved this issue. From the screenshot, memory is not spiked (actually it is almost not changed).
    So in current situation you can test to enlarge the size of physical memory (and virtual memory) for test if available. And as Dell provided a Windows 8 system, you can try it before and after installing Windows 8.1.
    As a support engineer I also hope to help fix the issue or at least find out the cause. Later I will try to find a Windows 7 system for testing as well. 
    In addition, please understand that as the issue occurs mostly in Windows 7, though it seems related to VSS, it is still a Windows client system issue. So you can post the question to Windows 7 forum for further information. Here is the link:
    http://social.technet.microsoft.com/Forums/en-US/category/w7itpro/
    Please remember to mark the replies as answers if they help and un-mark them if they provide no help. If you have feedback for TechNet Support, contact [email protected]

  • Any easier way to linking audio-a and video-v files?

    Hi everyone
    I've received some DV-Clips from a friend of mine who captures his videomaterial into split audio and video files. Now I don't like working with these split files and would like to relink these into one file with audio and video integrated. And if possible do this in some kind of batch function.
    I could export the corresponding audio and video files from final cut into one file. But seeing that there are quite alot of clips to manage, that's seems a bit of a boring task. Any ideas? I've tried looking through my manuals and asking help, but haven't found anything yet.
    Cheers!
    Steve
    G5 Dual 2 GHz   Mac OS X (10.4.6)   Final Cut Pro HD 4.5
    G5 Dual 2 GHz   Mac OS X (10.3.9)  

    Will Apple L link them?
    You could nest or add the audio to the video at the QT level via QT player and re-import.
    I work with them split almost always, remember hit bb to bring up the razor all. This will chop both at the same time.

  • Why do some songs and videos stop playing or freeze while playing?

    I have an 80 gig iPod classic that I never had problems with until now. I started noticing songs and videos I bought from iTunes aren't working. They will play for 30 seconds, stop, and go to the next song. I called iTunes, and they told me to use the online support but it hasn't helped me. Every time I go on there, it just tells me to call again. I've also tried to restore my iPod and it didn't work, so I'm wondering if anyone else has found and alternate way to fix it.

    I have a similar problem.  My IPod 5 and 3Gen will stop playing songs about halfway through. The timer indicates its playing but no music.  When I've checked these songs on in ITunes they pay fine and completely.  I've tried removing them from ITunes and downloading again but with no success.  This seems to be random and as I have over 2K worth of songs its difficult for me to determin where the problem is.  One of the reasons I purchased the IPod 5 was hopes to eliminate this problem.  Any ideas on what other things I can do to solve this problem?

  • Why are my photos and videos syncing sideways in my computer? When I email or sync photos they are sideways.  I've called apple and they are no help.  I can fix the pictures, but the videos are a different story.  Please help.  I have an HP comp Win 7

    My pictures and videos are shown correctly in my phone and when I play videos in itunes they are upright, but the location they are saved on my computer they are side ways.  There has got to be a setting somewhere to fix this.  Please help.

    Generally I would not use Facebook for sharing any photos, it compresses the photos substantially, and when you have shadows and dark colours you get visible "bands" where there should be subtle gradients, ie at sunsets and sunrises.
    It sounds like you are using two methods to upload to Facebook:
    1. Sharing from within Aperture, which basically syncs Facebook with your Aperture album, so any changes made at either end gets synced, hence the deletions from Albums, although the original file should still be in your library, just removed rom the album. It is like a playlist in iTunes.
    2. Exporting pics and uploading to Facebook from the browser.
    I am not sure how method 1 gets compressed, but I know that uploading hi-res jpegs to Facebook using method 2 results in poor quality images.
    I wouldn't even bother comparing option 1 or 2, and they will both be poor images once you view them on Facebook, as opposed to viewing uploaded images on proper image sharing / hosting sites.
    Your problem is not with Aperture, it is using Facebook for showing your work.
    If you export pics form Aperture at high res jpegs or TIFFs your images will be fine.
    If you insist to use Facebook as your way to share your work, then your workflow should be this:
    1. Right click images you want to share.
    2. Select Export version.
    3. Export as 100% size and ensure the export settings are set at 100% quality.
    4. Upload this pic into Facebook.
    This will get you the best image size and resolution on Facebook.
    See how you go.

  • HT1349 why are my pictures and videos from 4s iphone when downloaded sideways and the videos too?  Please help with feedback

    Ok who has been having problems everytime you want to download your videos and pictures they download sideways and videos too, please help

    The photos and videos are not imported that way. The problem lies with whatever photo/video viewing software you are using with Windoze which is ignoring or not recognizing the photo/video orientation info which is included with the photo/video EXIF data by the iPhone.
    I've never had this problem but I use a Mac which doesn't ignore photo/video orientation info included with photo/video EXIF data.

Maybe you are looking for

  • Inbox showing no messages and no folder tallies in Mail 10.10

    Every time I open the Inbox in 10.10 Mail I see nothing but "no messages selected", there is no message list. to get it to refresh the list i need to selected another mailbox and then come back to the Inbox. Also, now Mail does not show the number of

  • Some problem with JMS MDB

    In my application i am writing object messages to several queues considering its message id. i am using mdb as queue listener. i thought to create a sperate mdb for each queue. is this is correct. can one mdb can listen several queie. from mdb i get

  • Strange Behaviour of BEE form

    I created the batch header, and created the Batch line for an element, selected the assignment, added the input value effective date. it worked fine for me when i did manually. If i create the Batch line through an API, the batch line is created as e

  • Xserve G5 unexpectedly shut down

    Hi there, We are still using an old Apple Xserve G5 for minor backup jobs. So far the Xserve is running very reliable. A year ago the Xserve unexpectedly shut down for numerous times. As I found out the guys from the colocation connected the Xserve w

  • UC320W stuck in firmware update

    I'm working with a new client that has an existing UC320W. When I first attempted to login, I learned about the incompatability of their current firmware with newer versions of Flash. I downgraded my laptop's Flash and was able to login. I was immedi