Why is auto recording mode acting like manual recording

In Cap4 my recording mode is only capturing all screens in one screen even when I have selected auto record mode, anyone have any ideas why?

Hello,
Please, could you elaborate some more, I do not understand your question. What do you mean by 'capturing all screens in one screen'? And what did you expect Automatic recording mode to do, that you call it now behaving as Manual?
In Automatic recording mode, CP decides when to take a snapshot of the screen (because something has changed) and when to switch to Full Motion Recording because the capturing cannot be used with static slides (such as with drag and drop, moving with the mouse). In Manual recording you decide yourself when to take a snapshot (with Printscreen) and to switch to FMR recording.
My intuition tells me (can be wrong of course ) that you are supposing Automatic recording mode to be like video recording, but in CP that is called Full Motion Recording (use the video camera instead of the still camera in the toolbox of the recording setup). It is not really recommended to use this mode for whole projects, for several reasons: editing is quite a lot more difficult in FMR (and editing possibilities is a very important feature of CP) and of course the filesize will be much larger with FMR than with the 'native' modes like Automatic / Manual recording that are based on static slides.
Lilybiri

Similar Messages

Why don't WMV files Act like MPG files?

I use a mid 2012 Mac Pro; run OS X 10.9 Mavericks. When I was using OS X 10.5.8 Leopard the icons on my WMV files were flipped to show a picture of the video; just like all my MPG files. Why doesn't Mavericks do that? And is there a way I can flip the icons on my WMV files to show a picture again?

How do I convert a file to a QL/QT X v10.3 compatible file?
1) This depends on the software you have installed on your system. Basically you need to either have one of the purchase Flip4Mac products installed on your system or a conversion app that has built-in codec support and the source file will have to be unprotected. I have Telestream's Flip4Mac Studio (includes basic import and ecport codecs) so I can use QT 7 Pro, MPEG Streamclip, QT X v10.3, the Mavericks Finder level AV Convert software, or the free Flip Player to perform these conversions. If you don't have a paid Flip4Mac codec installed for use with apps that access you system QT codec components configuration, then you could try a free app like HandBreake or on of the commercial converters available for the Mac.
2) If you already have the Player Pro (or greater) codec package installed on your system, then you can simply open your unencrypted WMV file in the QT X v10.3 player and it will automatically be converted to an H.264/AAC MOV file.
3) If you already have the Player Pro (or greater) codec package installed on your system, then you can simply select one or more WMV file icons in the Finder that you want to convert and then select the Context Adaptive menu (Control-Click menu) and select the "Servoices > Encode Selected Video Files" option. This option will open a widow allowing you select a few conversion options like "High/Low" quality settings for targerted H.264/AAC display settings or the selection of the Apple ProRes 422/PCM codec best used as an inermediate codec if you plan to edit the converted file in a video editor at a later time.
4) If you already have the Player Pro (or greater) codec package installed on your system, then you can simply open your unencrypted WMV file in the free Flip Player and export your file(s) to app or device targeted presets.
5) If you already have the Player Pro (or greater) codec package installed on your system, then you can simply open your unencrypted WMV file in the either QT 7 Pro v7.6.6 player or free MPEG Streamclip app (if installed) for export to device targeted M4V, "Movie to MPEG-4" MP4, or compatible "Movie to QuickTime" MOV files (e.g., H.264/AAC, MJPEG/PCM, etc. compression format files.
6) If you don't have a WMV support codec package installed on your system, then you can try opening the file in the Free HandBrake app and us it to convert to one of available Apple compatible presets or create a custom preset of your own. (Note: I have only used this with common WMV downloaded files like WMA 9 audio with WMV 8 video in the WMV container.)
7) If you already have a commercial converter with WMV support built into the application installed on your system then you can use it to perform a conversion of your WMV files.
How do I create an icon manually?
1) Basically you select a compatible image file of a compatible size and shape and drop it to the "Info" window (Finder "Command-I" shortcut) icon area. I would normally recommend a JPEG image of VGA-like dimensions and in the shape you prefer. For instance, you can export/capture a frame from your movie and convert it to a JPEG image having the same aspect as your video with a 640 pixel width at 72dpi, create a 640x640 JPEG image if you prefer a more "record" album-like icon, create aposter or DVD case-like JPEG image if desired, or anything in betweem. Just be aware that if the images are too large in an incompatible format, they will be rejected when you try to drag 'n drop them to the info window. (I.e., it would be ridiculous to try and use an 8-, 10-, or 12-megapixel image as your icon.)
2) Where compatible, you can also assign a custom designed metadata "poster-frame" wich I believ is still used by the finder as an icon image. (Don't quote me on this yet as I have not confirmed it yet under Mavericks as it is taking som much time to just run down what is and is not still working video-wise un this new system.)

HT201263 when i try to reset my ipod it stops at 10minutes and the ipod turns itself on and acts like ive done nothing to it, it has been stuck on the "connect to itunes screen" and it wont reset. why?

when i try to reset my ipod it stops at 10minutes and the ipod turns itself on and acts like ive done nothing to it, it has been stuck on the "connect to itunes screen" and it wont reset. why?

After you place the iPod in recovery mode using
iOS: Unable to update or restore
You have to then connect the iPod to your computer and restore via iTunes. Are you doing that?

Why my videos recorded with the camera are not saved in the video app? It is saved like a photo.

Like the title says, why when I record a video, it is saved like a photo and not like a video. I mean that if I go in video app, I can't see my video that I just recorded, I have to search in my photos, but this is a video. I don't understand.
Thanks

Pictures and videos you take on the pad are saved in the camera roll. That's just where they go. If you select it, it should show with a play button to play the video.
If you sync it back to your computer, edit it and change it, then save it as a video, it will sync back to the pad as a video.

WHY DOES IT ACT LIKE I AM OPENING ITUNES UP FOR THE FIRST TIME

WHY DOES IT ACT LIKE I AM OPENING ITUNES UP FOR THE FIRST TIME

dewin1or wrote:
I want to extend the length of the song by repeating the first 28 measures.
split the region at the 28th measure
http://www.bulletsandbones.com/GB/GBFAQ.html#split
(Let the page FULLY load. The link to your answer is at the top of your screen)
then select only the first region and option-drag it to the end of the song

Eraser tool in Photoshop CS4 acts as if it is transparent when on brush or pencil mode. Block acts like its not transparent at all but there are no options for opacity, flow or brush size. Whats wrong and how to I make the brush and pencil eraser erase co

Eraser tool in Photoshop CS4 acts as if it is transparent when on brush or pencil mode. Block acts like its not transparent at all but there are no options for opacity, flow or brush size. Whats wrong and how to I make the brush and pencil eraser erase completely without having to go over it multiple times?
It started randomly about two weeks ago and I thought it was a glitch that would just go away. But now I am getting sick of using only the block eraser on one size. Help?

The easiest thing to start with is to reset the Eraser Tool.
Right click on the Eraser icon in the tool options bar and then click on Reset Tool.

Tried opening my Mac in safe mode SMS mode. And pram mode. It acts like it is going to start up the gets about 10 percent through the grey start up box and then suts down

Tried opening my Mac in safe mode SMS mode. And pram mode. It acts like it is going to start up the gets about 10 percent through the grey start up box and then shuts down. Any other thoughts? Thanks

Douglaslouis,
which model Mac do you have, and which version of OS X is installed on it?

Why won't OS X Mavericks start downloading when I click the download button? It thinks and acts like it starts downloading with the thinking circle moving then stops and goes away. I have tried going to the purchases in the app store and restarting it the

Why won't OS X Mavericks start downloading when I click the download button? It thinks and acts like it starts downloading with the thinking circle moving then stops and goes away. I have tried going to the purchases in the app store and restarting it there and that is not working either.

Repair permissions, restart your computer & try again.

Why wont my itunes open it acts like its loading but then it just never comes up

itunes acts like its loading but never comes up and rarely when it does come up it freezes.

Hello, jessykins25.
Thank you for the question. This sounds like you will need to rebuild your iTunes library file. Below, I have included the article that walks you through this process. Start with the section labeled Re-creating the iTunes Library file.
iTunes: How to re-create your iTunes library and playlists
http://support.apple.com/kb/ht1451
Cheers,
Jason H.

Premiere is acting like if i had 2 monitors plugged, why ?

Hi,
as said in my title, when i open premiere now, he is acting like if i had 2 monitors plugged. I have just one and never plugged a second one.
I have no access to my timeline as Premiere seems to consider that the monitor who don't exist is the main one…
I tried to change my spacework by choosing "2 monitors" in Premiere, so i can see some windows, but no timeline. And if i go back to a one monitor configuration presentation in Premiere, all the windows disappear.
Im working on CS6, mac. Any ideas please ?
Many Thanks

Try resetting the workspace:

Why don't I have Auto Night mode?

Ever since the upgrade to iOS, I no longer am able to set my view mode without it resetting. In trying to find a solution I keep seeing where people talk about the auto night mode. I don't have that option (see below).
I don't want auto night mode. I want to be able to turn on night mode and iBooks remain that way as before.
Any suggestions?
Thanks!

Have you tried a different book to see if the option appears in it - not all books support the 'auto-night theme' option, so it won't show on all

When I go into my music it acts like it's working but then it closes does anyone know why

When I go into my music it acts like it's working but then it closes does anyone know why

try reset
http://support.apple.com/kb/HT1430?viewlocale=en_US&locale=en_US

My 4S acts like it has earbugs plugged in, but does not have ear buds plugged in. Why?

my 4S acts like it has ear bugs plugged in, but does not. What could cause this?

Problem with your earphone jack...
Plug your earphones in/out about 20 times.
Clean your earphone jack.

Why is audition recording the stereo tracks unequally?

I just upgrade to 3.0 from 1.5 and I must say I have been racking my brain for hours trying to figure out all my problems. I found most by scrolling old posts but this one I cant find. After installing the program I opened a beat in the first track of multiview. I tried recording and I was having latency issues so I took the advice that popped up in a message prompting me to switch to ASIO drivers. I opened the audio hardware tab and selected my mic (02s) (samsung C01U). Now, when I record in stereo the volumes dont record evenly. The left ear records just a little bit louder then the right ear. On the bottom where the mic level are the top bar stays a precise amount away from the lower bar (about 2 inches). So when I record, the top level (left ear) records normal and the bottom level (right ear) in considerable lower. Doesn't sound good. I know I could equalize it using effects but I want it to record evenly. Anyone know how to fix this. I have VIA High Def Sound Card (I think...thats what it says under device manager) and windows 7. I was messing with the settings in my ASIO4ALL control panel trying to fix the latency issues so maybe I screwed something up there. What default setting should I put in the boxes in the ASIO4ALL control panel?

Phate008 wrote:
Have I been recording wrong this whole time?
Yes.
Do people record into mono mics often or do most people use stereo mics? Also why would stereo record equally in 1.5 but not in 3.0?
All microphones are essentially mono. If you have two of them closely adjacent but pointing in different directions in one casing (aka a 'stereo' mic), you will get some sort of stereo from them - depending on how good they are. The vast majority of people use mono mics for single voices though - there is no benefit from using a stereo one for this at all. And there is absolutely zero benefit in recording a mono mic in stereo - it just wastes file space, because both channels will contain absolutely identical information. In fact using a stereo mic pair for recording a single voice is counter-productive - you end up using the variable part of the mic's polar pattern on both mics (not so good), and the slightest physical movement of the vocalist shifts the sound in the mix considerably. This is way easier to control with a single mono mic - the only determinant of where it sounds in the mix is the pan control.
The reason you are experiencing a difference has nothing to do with Audition at all, but everything to do with using a different driver. The present driver for your mic only outputs signal on one channel in stereo mode - which is pretty ridiculous; it shouldn't even have a stereo mode! What you should do is select a mono input - which will say something like [01m] on it in Audition, and use that to record, using the pan control to position the sound in the mix.
In a properly set up stereo monitoring system, a mono source wil appear in a single (vurtual) location between the speakers, depending on where the pan control is set. If this doesn't happen on your setup, then you need to fix the acoustic conditions around the speakers so that it does, otherwise you won't have the faintest clue about what your mixes really sound like.
I'm sorry that this all sounds a bit harsh, but I'm afraid that this is the way it is...

Disable auto night mode in ibooks

This is exactly my problem. I want to disable the auto night mode in iBooks.
Turn off the auto night mode in one book don't change the night mode in the list of books.
That don't solve the problem.

Can somebody provide a screenshot of the off/on button. I can't seem to find it.
My problem is that I like the night mode but with the upgrade, it switches off each time I close iBooks. I want to turn it back to manual to keep night mode on.
Thanks!

Why is auto recording mode acting like manual recording

Similar Messages

Maybe you are looking for