Why is bluetooth not answering calls  but only making calls?

Everytime I receive a call while in my car, the bluetooth system anounces the call but when I pressn the connect button on the steering wheel it hangs down the call

That is my probllem too with my iphone5, did you find the problem.

Similar Messages

  • Trying to change ownership of my old iPod. The advice here is to go to "Devices" "Summary" "Restore", but I find "Devices" does not offer "Restore" but only "Sync", "Transfer", "Backup", and a greyed "Restore from backup."

    Trying to change ownership of my old iPod. The advice here is to go to "Devices">"Summary">"Restore", but I find "Devices" does not offer "Restore" but only "Sync", "Transfer", "Backup", and a greyed "Restore from backup."

    What I don't understand is that your iTunes looks different from mine--just a little bit. You have 3 circles, red, yellow, and green, in the upper right end of the top bar. INstead I have a square that is half gray. When I click it, I get a menu very similar to the menu under "File."
    The only place I see an entry for "Devices" is under "File," but it only gives the 4 options I mentioned before (see below). There is no "Summary."
    Here's another screen shot after I added an album to music. Now all the choices under "Devices" are grayed.

  • Why can I not receive calls on iPhone 6 ?

    I have just got my new iPhone  6 and cannot receive calls. They go straight to voicemail. I don not even receive the voicemail not receiving. called verizon and they can call me back but when i tried on another phone and Skype it @didn't work>

        Julz11111,
    Hearing that your calls aren't going through is very worriesome and we want to help. Lets check something out. Please turn off Advanced Calling by going to Settings>Cellular>Enable LTE and then place the check mark next to Data Only. After that please turn the phone off, remove the SIM for 30 seconds, put the SIM back in, and turn the phone on. Let us know if that resolves this issue and kicks your calls into working for you.
    SarahO_VZW
    Follow us on Twitter @VZWSupport

  • Why C# is not statically typed but F# and Haskell are?

    There was a talk given by Brian Hurt about advantages and disadvantages of static typing.
    Brian said that by static typing he don't mean C#, but F# and Haskell.
    Is it because of dynamic keyword added
    to C#-4.0? But this feature is relatively rarely useful. By the way, there are ⊥ and unsafeCoerse in
    Haskell which obviously are not the same, but something that could blown your head off in runtime similarly like exception thrown as a result of dynamic.
    Finally, why F# and Haskell could be named a statically typed languages and C# couldn't?

    I'm addressing the overlap between Haskell and F#'s type systems. The part they share is known sometimes as System F. F# by necessity provides bits and pieces of C#'s type system, but this isn't what the speaker was talking about.
    Both C# and Haskell/F# are statically typed, but they're two different flavors.
    Subtyping
    Specifically, C# is a statically typed language with subtyping. This means that if you look at the typing rules for C# there's one like
    Env |- x : T, T' <: T
    Env |- x : T'
    Which means that any well typed term has more than one potential type. This in not the case in (vanilla) Haskell or F#. Every type has a single most general type, a principal type. This has a few benefits like total type inference.
    Expressions Everywhere
    Besides this, Haskell and F# have a greater emphasis on expressions, expressions have types, but statements don't. This means that in C#, the compiler is checking less of your code, because less of your code has types. In Haskell, everything has a real, checkable
    type.
    In substantive terms, every single node on a Haskell AST has a type or kind (or sort). The same cannot be said of a C# one.
    Sum Types
    Beyond this, Haskell and F# have what are known as sum types.
    data Bool = True | False
    This is how a boolean is defined in Haskell. This provides a few different guarantees than in C#. For example, when there are a discrete number of things in C#, like say, an AST. We can model this with an inheritance hierarchy, but these are open. Anyone can
    come along and add something to it. We can use an Enum,
    but then there's no sane way to attach data to each tag uniformly. This is what's called a tagged union, and it's up to you to implement/use it correctly, the compiler ain't gonna help.
    This makes it very hard to ensure that we've covered all possible nodes of an AST. For example, say you have a function
    doStuff :: AST -> AST
    doStuff (SomeExpr ..) = ...
    doStuff (SomeStatement ..) = ...
    --// doStuff (SomeIf ...) = Oh noes, we forgot a node
    The compiler can warn you because it can prove exactly how many nodes there are, ever. In C#, the equivalent would have to be done with downcasting, and then, since the set of nodes in our hierarchy is open, there's no way to issue compile time warnings.
    A company, Jane Street, raves about how useful this feature is in their large OCaml code base. Watch a few of their talks,
    they talk quite a bit about how using OCaml impacts them in the Real World.
    Soapbox
    Now I've outlined quite a few differences over System F over many mainstream type systems, but they're all still static type systems. It does bother me when people call Java/C#/C++ "not statically typed" they are. And they certainly give you
    more compile time guarantees than say, Python. So it's a bit unfair to dismiss them out right.

  • Can not answer calls 8/10 times

    Hi,
        I am Running Win 8.1 and have a secondary account also (skype). When people call me i can not answer or decline. i have version 6.20.0.104. The person calling says that the call connects his side but can not hear anything. I call back and i have the dialing screen without ringing untill the call times out.
     I have tried with only 1 account open but it makes no difference.
    I call back the third time or they call me and i can answer no problem but 8/10 times this happens with the 2/10 being answered first time.
    I hope someone has some advice as its a real pain now.
    Regards
    AMICA_DAVID

    I have this same problem... had couple of my staff of network engineers trying to resolve this over the course of several days... cleared all and anything to do with skype from my hard drive... program, registers, cache, hidden folder stuff, defrag, etc...  and it appeared fixed... but after about a week this same crap started again... no matter how many times i press the answer button it won't answer... until the caller hangs up and calls again... many times I have to engage control alt delete just to get the Skype ringer to shut off... funny that we don't seem to get any response from Microsoft on this issue... there was some critiptic funky stuff buried deep in some text strings we followed Microsoft's instructions on about 6 month ago, but did not work either... ever since Microsoft got their hands on Skype, its realiability has gone down (at least for our company)... too bad such a formerly great company is eroding so quickly.

  • My Firefox 20 seems to not shut down but only restart. Also, rather than my home page, the last pages visited appear.

    It's as if Firefox 20.0 never shuts down but only restarts.
    Even when I close Firefox 20.0 by clicking the X button on the top right or use "exit," when I open Firefox, it acts the same as if I'd used "restart," namely the tabs don't load until I click on them. Furthermore, the 4 pages I use as my home pages aren't there but rather whatever pages I had up when I last closed my browser.
    I have tried creating a new profile, which worked ONE TIME. Then, it went back to my problem.
    I have used "restore" to go back to a time before the problem started but that hasn't worked.
    I removed the addon I had downloaded in that time period but that didn't help, either.
    Thank you for any help you can give. I know you're all volunteers and your time is important.

    Does it seem like that Firefox is crashing? Try checking if there are any crash reports by going to about:crashes in your browser. Alternatively you can try safe mode as outlined below:
    '''Try Firefox Safe Mode''' to see if the problem goes away. Safe Mode is a troubleshooting mode, which disables most add-ons.
    ''(If you're not using it, switch to the Default theme.)''
    * You can open Firefox 4.0+ in Safe Mode by holding the '''Shift''' key when you open the Firefox desktop or Start menu shortcut.
    * Or open the Help menu and click on the '''Restart with Add-ons Disabled...''' menu item while Firefox is running.
    ''Once you get the pop-up, just select "'Start in Safe Mode"''
    '''''If the issue is not present in Firefox Safe Mode''''', your problem is probably caused by an extension, and you need to figure out which one. Please follow the [[Troubleshooting extensions and themes]] article for that.
    ''To exit the Firefox Safe Mode, just close Firefox and wait a few seconds before opening Firefox for normal use again.''
    ''When you figure out what's causing your issues, please let us know. It might help other users who have the same problem.''

  • Why is there not an option to only print form data in Adobe XI?

    I have created a form in Adobe Acrobat XI Pro and saved it.  Then I want to open it in Adobe Reader, fill it in and then only print the form data but there is not an option to only print form data in Adobe Reader XI.  I'm not sure if it is in the way I created the form or something else.  Any help will greatly appreciated.  Thanks!

    Basically you need to place the file's contents on a non-printing layer. Try this:
    Create a new blank file and open the Layers panel on the left.
    Click the Options button and select Import As Layer.
    Select your pre-existing PDF file (maybe save a copy of it without the form fields first and use that version).
    Right-click the layer you created and select Properties. Change the layer's Print option to "Never Prints".
    Now copy the fields from the other file and place them in their correct location on the page.
    Save the file and you have a file that can be used to print only the form fields data, even in Reader.
    This process can be automated, by the way, but that would require a script.

  • Why can IPhone not drag/drop BUT Ipod Touch can???!!!

    Hi all,
    Why can I not drag and drop files within Itunes to my Iphone (synch only)
    Whereas on the inferior IPod touch I can !!1 Huh?????
    SvK
    Message was edited by: Steven von Kampen

    BigT_NYCOM wrote:> Actually, from my understanding, iPods can sync contacts and calendars. At least my old Video iPod has all my contacts and calendar in it.
    Yes they can, you are correct. I should have maybe said that in my post. I was merely trying to say that I believe they want to keep the iPhone more organized. I got out of dragging and dropping to my iPod after I created my first playlist. Makes things a lot eaiser just to sync a list.

  • HT1657 I have not watched movie but only have 1 day to view?

    Downloaded a rental movie from ITunes have not watched it but it says I have only 1 day to view? Thought it was 30 day rental once views could be watched within 48 hrs? How do I solve this problem?  Have not been billed yet?

    Did you click play on it ? Even if you only watched it for a second then the countdown before it expires will start, which is 24 hours if you are in the UK, 48 hours elsewhere.

  • Why is FmsDestroyFileAdaptor not being called when FMSCore exits

    I'm developing a file-io plug-in and the FmsDestroyFileAdaptor or FmsDestroyFileAdaptor2 functions are not being called for my dll when the FMSCore process exits. I built the and tested the sample plug-in that comes with FMIS 3.5 and the same problem exists with it as well.
    Any clues? Is this a bug?
    Thanks,
    George

    This issue has been fixed in 3.5.2 release. See http://www.adobe.com/support/documentation/en/flashmediaserver/releasenotes.html

  • HT4528 My iphone 4s screen is frozen, I can not shut the phone off, can not answer calls, does anyone know how to unfreeze it?

    My iphone 4s screen is frozen, i can not shut the phone off, can not answer the phone or texts,

    Reset, hold both home and power buttons until the iPhone begins to start. Usually takes about 10 seconds. Just keep holding both buttons.

  • Why can I not receive calls on FaceTime but can make them?

    I can make calls on FaceTime but cannot receive them. I"m told that when I'm called it rings but I do not hear it. I am able to make calls that connect with no issues. Why is this happening?

    Hey jodimb,
    Thanks for the question. To troubleshoot this issue, we’ll need to isolate if it originates on your end or the caller’s end. See the section titled “Troubleshooting FaceTime for Mac” in this resource:
    FaceTime for Mac: Troubleshooting FaceTime
    http://support.apple.com/kb/TS4185
    Additional Information:
    Unable to make or receive FaceTime calls after April 16, 2014
    http://support.apple.com/kb/TS5419
    Thanks,
    Matt M.

  • Why does a SIP Client in background not answer calls?

    Using any of the SIP clients on IOS7.1 it appears that I have about 10 -15 mins before a SIP client in the background becomes unresponsive. Any ideas why and what can I do about it?

    Since this is an app-related issue, you may get better results solving your problem by contacting the app developer, or searching their help/FAQ pages.

  • When try to download a program in safari, it does not start download, but only turn into black screen (software is updated). Anyone know why?

    Suddenly yesterday, I can´t download any programs to my Imac. When I start download, the screen just turn black and nothing more happen. All the software is updated and I don´t remind we have used any download manager before.
    We just moved back from China to Denmark (The mac is brought in Denmark) and first time use the mac since we come back. Is there any settings, we maybe need to adjust?
    Hope somebody can help us
    Thanks

    1. Install Adobe Flash Player.
        http://get.adobe.com/flashplayer/
        Restart the computer. Relaunch Safari.
    2.  Enable Plug-ins
        Safari > Preferences > Security
        Web Content:
        Click in the box for "Enable Plug-ins".
    3. Check  whether you are currently  in  YouTube HTML 5 trial.
         http://www.youtube.com/html5
        At the bottom  left of the page  uncheck the box for
       "You are currently in the HTML5 trial".
    4. Reset Safari.
        Click Safari in the menu bar.
        From the drop down select "Reset Safari".
        Uncheck the boxes next to all items.
        Check the box next to "Remove all website data".
        Click "Reset".

  • When signing up for Sync I am asked to confirm I'm not a robot but only get a blank screen.

    Firefox 3.6.12
    Am very eager to sync Firefox on my new Android phone but after creating a sync key on my desktop I am asked to confirm not being a robot. Since I only get a blank screen I have no clue how to do that. There seems to be nothing clickable within the screen nor a possibility to type. Any help is highly appreciated.

    It's called a "captcha" but you have given no hint at what url (/site) you are seeing this at. The captcha could be an image, you might not see third party images, it could be flash, you might be blocking an image with "Adblock Plus" or a hosts file. There may be other ways to depict an image and they might be blocked or missing a plug-in.
    See:
    * http://kb.mozillazine.org/Images_or_animations_do_not_load

Maybe you are looking for