Why is Captivate not working properly in Lectora?

Hello everyone!
I work with Captivate 5 and Lectora Professional Publishing Suite 2010 and I am having trouble making it work correctly. I have made multiple training & assessment simulations in Captivate and have converted them to SWF's but when i put them into Lectora an error occurs. All of them work fine until it comes to a step where you have to press the Tab button. Nothing happens when i press it and I won't be able to continue on with the training or assessment until i press Tab. Help would be greatly appreciated! Thanks
- Lena

Yes. When I am testing the training in Captivate it goes to the next text box when I press Tab like it should, but when I put it into Lectora, the Tab key doesn't work anymore

Similar Messages

Why iMessage is not working properly anymore since i've uploaded the new iOS 6 ??

Why iMessage is not working properly anymore since i've uploaded the new iOS 6 ??

I'm having the same problem. I have a 4th gen 32GB iPod Touch, and since upgrading to iOS6, iMessage has been nothing but buggy. It will work for an hour or so, and then randomly stop working as it won't send or receive messages. There's nothing wrong with my wifi, because that's the same as it was before. I really hope someone knows something to fox this problem. Some people use iMessage for good reasons - it needs to be a reliable messaging service like it was in iOS5.

Why Mail does not work properly after updated to Mountain Lion?

I updated to ML two days ago and my Mail is not working. I can read but cannot reply because there is no cursor. Restarted a few times, no change. Anybody has the same problem??
Rudh

I forgot to mention (and add a new level of strangeness) that Mail is retreiving all of my messages from my personal (AT&T) account without issue.
And I just discovered an even bigger problem: all of my emails from my Sent and other folders from my work account are completely gone!
I may have no choice but to revert to my Lion system as of yesteday, before I installed ML.

Why the games are not working properly in my ipad after installing iOS7

Why games are not working properly in my ipad in my iOS 7

The games you mention would have been written and therefore designed for the previous version of iOS - you've most likely had a lot of updates lately in the run-up to the release of iOS 7 and if these games haven't had an update then chances are these will need to be adapted to iOS 7 by the developers if not working correctly.
Regards,
Steve

Mail is not working properly (cannot replay), and skype cannot be answered

Did the verification, repair and installation disk of Mac. Why mail is not working properly (cannot replay), and skype cannot be answered?

I most often do not restart my new MBPro .... 10.9.5 ..... but happened to a day or so ago, and it immediately began to block / problem with email .... I waited to see if it sorted out, but no .....
I get he server “p06-imap.mail.me.com” cannot be contacted on port 993 ..... then deselected SSL and that did not help, so went back and selected it again .... and again not working .....
I can see my stuff "online" but I do not want to do it that way EVER .....
your "deselect mail" in ICloud preferences .... did nothing good for me .... any other thoughts Linc ?? in fact, some hundreds of in and sent emails did not show up .... I'm hoping they are going to when this gets fixed .... but hey, ..... right now I'm NOT in business ....
thanks

Home/sleep button is not working properly. why?

i just bought i new ipod on ebay. But home and sleep button on my ipod touch 4th generation is not working properly after long sleep time. but it works properly when its plugged-in for charging..why? how can i solve it?

Hi,
Try resetting your iPod: http://support.apple.com/kb/HT1430.
Hope this helps!
---likeabird---

I had to restore my computer. After reinstalling itunes and sincronizing with my ipod, the music files were not organized in itunes as in the ipod: some songs were missing, some albums has no cover? Why is the sincronization not working properly?

I had to restore my computer. After reinstalling itunes and sincronizing with my ipod, the music files were not organized in itunes as in the ipod: some songs were missing, some albums has no cover? Why is the sincronization not working properly?

See Recover your iTunes library from your iPod or iOS device.
tt2

Play/Pause Button Captivate 3 not working properly

I am using Captivate 3, but my play/pause button is not working properly. I can publish and upload to my LMS, but when I click the pause button the first time the mode changes but the project keeps playing. I have to click two more times and then it works. Can anyone offer any assistance? Thanks so much!

Hello @Unit_27 ,
Welcome to the HP Forums!
Thank you for the information about your keyboard! I'll see what I can do to help
I think it would be a good idea to take apart the keyboard, or some of it, to determine if the keys are obstructed somehow. Some information on the supported method of cleaning the keyboard is mentioned in this document: Cleaning your Notebook PC
If this does not resolve the issue, I would reinstall Windows on the computer. The issue at this point would be software related, to some unknown extent. A recovery will address any software issue. First, make sure you backup everything you need to. Here is some information on how to do this: Backing Up Your Files
Once this is done, it is safe to reinstall the computer. Here is some additional information on how to do this properly: Performing an HP System Recovery
Please let me know if you have any other questions. Thanks and have a great day!
Mario
I worked on behalf of HP.

Why does iMessages does not work properly ? Please help me ! Its works better with the previous version if compared with the latest iOS

Why does iMessages does not work properly ? Please help me ! Its works better with the previous version if compared with the latest iOS

Many, many thanks for both of you Todd and Rick.
to Rick:
I suppose you mean the Color Settings in Project Settings as follows:
- Working Space: None
- Match Legacy ... Gamma Adjustments checked ON
But it does not correct the colors in effects. And checking or unchecking Make Movie/Output Module Settings/Color Management/Profile/Preserve RGB does not make any difference.
to both of you:
Those parts of the video image that does not have color effects are just fine. In these parts the color is preserved when reimporting to FCP. However, those parts having color effects (except Levels, as decribed earlier) have altered color results. So, only the parts having effects affecting color are misinterpreted in the image area. The mismatch is of course seen in AE, before making the movie.
What I ment with "Color Management not working properly" is that (instead of "disabling" it) Color Management does not seem to be able to correct this "misinterpretation" or difference in effect handling between AE 6 and 10.
So, would you have any solution for this problem?
Again, many thanks for your fast replies!

Hi, Someone Know why my charger is not working properly but always it was been working good but now when conect my iphone (3gs) shows a yellow triangle saying : Charging is not supported with this accessory. Please I need some help here. Thanks =D

Hi Someone Know why my charger is not working properly but always it was been working good but now when conect my iphone (3gs) appears a golden triangle saying :Charging is not Supported with this accessory. Please I Need Some Help Here. Thanks =D

sounds like the cable or the iphone connector are somehow damaged

Why is the built-in Apple dictionary in IOS7 not working properly?

I've updated the system of my iPhone 4s to IOS 7.0 and I noticed there is a big change in the built-in dictionary. I touched the" manage" button and downloaded several dictionaries, however, I came across an issue that the Apple dictionary is not working properly. The definitions are just not there. The Oxford dictionaries are fine, but I miss the buitl-in Apple dictionary like the one in IOS6. Does anyone have the same issue?

I had constantly wondered about the same problem and today I've finally figured it out.
I thought 'Apple dictionary' had to be the same simple, built-in one in previous iOS versions,
but it's actually dictionary for Apple-related terms only, I guess.
Kinda like Apple Encyclopedia?
Just try typing Mac and something and that 'Apple dictionary' will give you the definition of Mac, haha.
Wish I had thought of this earlier then I wouldn't have been this disappointed LOL

Why does my ipad not work properly when charging

when my ipad is plugged to charger it does not work properly goes crazy

Not sure what 'goes crazy' means but it most likely should not do that. Try a reset... press the home and sleep/lock buttons until you see the Apple logo, ignoring the slider. Takes about 5-15 secs of button holding and you won't lose any data or settings.
Also try it plugged into another outlet (on another circuit) and/or try another charger.

Why is my sleep/turn off button not working properly?

I've had my iphone 5 for about 7 months and it's been having all sorts of problems, like the sleep/turn off button is not working like it did when i first got the phone! I have to press the button harder and on the left side for it to work. Is there anything I can do? Does anyone know the cause of it?

my iphone 4 sleep\wake button doesnot working properly
i have to press it 2 times..in first attempt (sometimes) the screen flickers and go off and i have to press it again to wake it ...
and when it wakes up and i press sleep button it go off and if i press it again it comes with a flicker and works fine
but it does not work properly in first attempt
suggest something and in my country there is no official apple repair store and no apple store ..so that i can take it there and they replace it ...

Subvi does not work properly when called inside a vi

Hello Every body
thanks for your help. i am using a sub vi for sine signal generation. as a vi it works fine. but when i called this subvi inside another VI it gives some problems. for example timer indicator works properly.it reinitializes as well in the sub vi, but in the main VI it does not work properly. means does not count the time.in the sub vi on the fly i can change the values of frequency and amplitude in real time, but when i use as sub vi, it does not reponse as i change the values in the control arrays.similarly pause and continue works properly in the sub vi, but once again in the main VI, it does not work properly.graph indicator also work properly in the sub vi. but here once again it does not work properly in the main VI.the pause resume indicator also does not blink, when it is continue. in the subvi it blinks very well.generally why the sub vi does not work properly inside the VI?i am sending my VI and sub vis.
any tips would be highly appreciated.
thanks
Regards
Attachments:
vi.zip ‏87 KB

I just want to add some more details to Dan's answer. The subVI is acting exactly like you've coded it. The mistake is in understanding how subVIs work. When you call a subVI (or a function in any other language), you pass some parameters to it, the subVI does it's thing and returns values. the subVI does not accept new parameters from the calling VI until it returns to the caller and the caller runs the subVI again. In your case, you have a subVI with a while loop. You have some front panel control wired to the subVI's stop terminal. When first called, the value is false. So the subVI will keep running until the subVI's stop button becomes true but you cannot change it from main until the subVI finishes and returns so the subVI will never stop. As Dan says, the solution is pass references of front panel controls to the subVI and have the subVI monitor those references for changes and to update references to indicators on Main. You subVI does not need any front panel controls or indicators of it's own.

Copy Function is Not Working properly In Order Management

Hi,
Description-
When an order with remnant model is copied, it copied only the topple model line and they include items attached to the top model line. It doesn’t copy the
option class lines and the option item lines (unshipped and shipped).
Example-
Enter an order with for pd-pto-model. See order#21231.The ordered quantities and structure of the model is shown below:
pd-pto-model 5 qty
pd-std-item1 (included item) 5 qty
pd-pto-oc (option class) 5 qty
pd-std-item1 (included item with rfr checked) 5 qty
pd-std-item2 (option item with rfr checked) 5 qty
pd-std-item3 (option item) 5 qty
Booked the order and pick relased the order. While shipconfirming only shipped 5 qty of pd-std-item3 and staged the rest. On querying the sales order, the line status is seen correctly as follows:
pd-pto-model Closed
pd-std-item1 (included item) Picked
pd-pto-oc (option class) Closed
pd-std-item1 (included item with rfr checked) Picked
pd-std-item2 (option item with rfr checked) Picked
pd-std-item3 (option item) Partially Interfaced to receivables
Copied this order from the order header. The new order# is 21232.On querying the order, I see only 2 lines as follows:pd-pto-model.
Anyone can help me on this issue.
Thanks,
Chinna

haisrig wrote:
Hi ,
We are facing an issue with select() in Solaris 10. we had written a sample program to this issue.
Program name :- sel.cpp
int main()
struct timeval sleeptime;
sleeptime.tv_sec = 60;
printf("1\n");
select(0,NULL,NULL,NULL,&sleeptime);
printf("2");
return 0;
When i run this program in Solaris 9, its printing 1 and after one minute its printing 2.
When i run this program on Solaris 10, its printing 1 and 2 without waiting for 60 seconds.
When i tried to print tv_usec, its printing as 0 in solaris 9 and some garbage values in solaris 10.
I think because of that the above select function is not working properly in solaris 10.
Why the tv_usec is not taking 0 as default values in Solaris 10?
We are using our legacy code for past 20 years. So, before going to do any changes we are trying to find why this happenig like this.Hi
It sounds to me that you've been lucky for 20 years then.
Local POD variables on the stack that aren't explicitly initialized can contain any value. Here's what I see in your app with dbx
(dbx) run
Running: sel
stopped in main at line 9 in file "sel.cpp"
    9      sleeptime.tv_sec = 60;
(dbx) print sleeptime
sleeptime = {
    tv_sec = -4198732
    tv_usec = 0
}That's on a Solaris 10 SPARC machine. If I try it on a Solaris 10 x86 box then I get
(dbx) print sleeptime
sleeptime = {
tv_sec = -830490588
tv_usec = 134510556
and I see the behaviour that you describe.
Paul

Why is Captivate not working properly in Lectora?

Similar Messages

Maybe you are looking for