Why is Clock Set unstable?

In my practice i realized that setting clocks always change to "a dead old time of 1993 i think this was the factory default" whenever i restart the router, even though the new "clock set" is saved to "startup"
Can anyone please help as to why this is happining and how to come about resolving it?
The command used was "clock set hh:min:sec MONTH DATE YY"
Thanks

Olu, the seting time/date unfortunately is not saved in configuration , in most cases this is normally resolved by configuring network time protocol also known as NTP , in the event that you do not have an internal server that provides NTP information there are numerus public NTP server out in the internet where you can pooint your local NTP servers to sync up with public NTP servers, do a search on google for public NTP once you get some of this information then you don't have to use anymore clock set but point your device to NTP servers to pool time date information onto your router or switch.
Configuring NTP on CATOS devices
http://www.cisco.com/en/US/docs/switches/lan/catalyst4000/7.3/configuration/guide/ntp.html#wp1019819
On IOS
http://www.cisco.com/en/US/docs/switches/lan/catalyst4840g/12.0_13_wt6_1/configuration/guide/4840ntp.html#wp1023829
pls rate any helpful post if it helps!
HTH
Jorge

Similar Messages

  • Why configuring clock using clock set command is not accepted in nexus 7k?

    Hello,
    I have a message like this:
    Admin-CORE1_VDC# clock set 15:26:00 7 december 2014
    Setting clock from CLI is not allowed in this VDC.
    Use the following config command to use the "clock set" command.
    clock protocol none vdc <vdc_id>
    If I issue that command the message shows like this:
    Admin-CORE1_VDC# clock protocol none vdc 2
                       ^
    % Invalid command at '^' marker.
    Admin-CORE1_VDC# conf t
    Enter configuration commands, one per line.  End with CNTL/Z.
    Admin-CORE1_VDC(config)# clock protocol none vdc 2
                               ^
    % Invalid command at '^' marker.
    Admin-CORE1_VDC(config)# 
    Pleas advice:
    Thanks,
    Dani

    Hello,
    I have a message like this:
    Admin-CORE1_VDC# clock set 15:26:00 7 december 2014
    Setting clock from CLI is not allowed in this VDC.
    Use the following config command to use the "clock set" command.
    clock protocol none vdc <vdc_id>
    If I issue that command the message shows like this:
    Admin-CORE1_VDC# clock protocol none vdc 2
                       ^
    % Invalid command at '^' marker.
    Admin-CORE1_VDC# conf t
    Enter configuration commands, one per line.  End with CNTL/Z.
    Admin-CORE1_VDC(config)# clock protocol none vdc 2
                               ^
    % Invalid command at '^' marker.
    Admin-CORE1_VDC(config)# 
    Pleas advice:
    Thanks,
    Dani

  • Clock set before 2-24-01 - WHY????

    When the mini was turned on this morning (out of town for a day, so turned it off before leaving) the clock was 2-26-94 with the wrong hour setting and a window that read Clock Set Before 2-24-01 etc. I turned on the automatically set clock date (was not previously on) and connected via ISP and it updated, but from using other Mac's over the past 12 years this usually meant the internal battery needed replacing although most lasted 3 or more years. So this happening in a Mini at one year puzzles me.
    This is second time this has occurred.
    Solution?
    It's Under Apple Care but I didn't get the "quick Reference Guide" that was supposed to be in the original materials or the Apple Care Protection Plan
    materials.
    Mini, 1GB, 1.42 GHZ, 80G   Mac OS X (10.3.9)  

    I would set the clock now.
    Then, after you have made sure that the date and time are correct, I would turn the computer off.
    Then, un-plug it from it's power supply.
    I would leave the computer un-plugged for maybe 5 or 10 minutes.
    Then, plug it in, and turn it on.
    Check the date and time again.
    If the date and time are incorrect again, then you know that either you're battery is dead or you're system has a PRAM problem somewhere.
    If the machine is under warranty, then I would call to arrange an inspection and have it serviced.
    If it's not under warranty, then you might try replacing the battery.
    The Mac Mini uses a coin-cell battery like the PC's do.
    So, you should be able to obtain a replacement battery at just about any local store. I haven't looked at mine, but it should be a CR2032 which is the same battery used by PC's and the iMac G5.
    You should be able to find a battery at Wal-Mart, Radio Shack, and just about any other place that stocks batteries. The CR2032 is a common stock item at most stores.
    As a side note, at least you're only goes back to 2001. I used to have a computer that would revert back to 1953 or 1956 when it's battery died. I can't remember which year, but I know it was in the 1950's.
    Strange since we didn't even have personal computer's back then (much less the digital timers used in computers). How weird. I know the clock in that machine was made by Dallas Semiconductors.

  • Why when I set up my Country or Region on my iPhone 5, the default language of the phone is the country's and not the one I selected when I set up my preferred language?

    Why when I set up my Country or Region on my iPhone 5, the default language of the phone is the country's and not the one I selected when I set up my preferred language?

    Go to Settings/General/Reset and choose Reset All Content and Settings. This will erase everything on the iPhone and allow you to set it up again as new with the proper Apple ID.

  • Why is clock running slow?

    Why is clock on phone losing about 3-4 minutes a day?

    Sounds like it isn't syncing correctly with either your network time or network time zone settings.

  • Why my VPN setting can't remove it on MBP

    Why my VPN setting can't remove it on MBP

    Held the COMMAND key down and dragged the problem Untitled CD to trash.  That worked thanks to all of you who had posted help to previous complaints!!!

  • Why does the setting of trackpad always changes everytime i turn off my Macbook pro?

    why does the setting of trackpad always changes everytime i turn off my Macbook Pro?

    Sure ,  just refer to:
    http://support.apple.com/kb/ht1379
    http://support.apple.com/kb/HT3964

  • HT5012 I can't get my clock set right

    Help I can't  get my clock set right

    Settings>General>Date & Time>Set Automatically>On.
    If that isn't working post back with details. Tell us what you've tried, what happens when you try .... Details,....

  • Why is Logic so Unstable?

    After working on a track for the best part of the morning, Logic decided to crash on me again...
    I had saved my work, but there are a few things I have lost.
    My question is this.. Why is logic so unstable? I have used logic since 1999 and never have I experienced it to be this bad.
    I get random crashes with Logic Pro but with no other Apple app.. Final Cut and others work like a dream on my machines.
    Logic can crash at any point it wants and I can never replicate the crash or figure out why.. I always keep my system tidy, repairing permissions on installs, Onyx, Disk warrior all the time. I have completely erased and installed my Mac HD writing Zeros to it and still get these problems.
    I have third party plugs like RMX, Ivory, IK Philharmonik, and others, but all with reputable companys who have all released regular updates that work with all versions of the present Tiger OS. I have also tried running Logic with no third Party plugs, and still get random crashes.. but who would want to as the factory sounds are not as good as my third part plugs.
    Many people say it is third party plugs that cause instabillity, which if it is the case, is even worse on Apple's part as no other DAW I use (with all same plugs) crashes like this....period.
    DP, Pro tools, they all work great.. Trouble is I know logic to well to switch to another DAW mid project.. Besides, why shouldnt we be able to use third party software with Logic if other apps handle them perfectly??
    Does anbody else have similar experiences or find that Logic Pro seems to be overlooked and way under-developed in terms of its basic stability?
    I know that WWDC is coming up, but to me, even if they do release something that will be the killer app, I feel that the way they have treated their Pro customers in not developing Logic Pro sooner and quicker is a swift reminder that Apple is far more concerned with other things and not its professional and loyal music making customers? (Garage band users not included!!haha)
    I had to vent this somewhere..hope you all understand where I am coming from!
    thanks..
    Two G5 Dual 2.5Ghz, 2.5GB Ram, Logic Pro 7.2.3   Mac OS X (10.4.8)  

    Just to stay with the subject for a second (myself included...)
    I always keep my system tidy, repairing permissions on installs,
    Onyx, Disk warrior all the time. I have completely
    erased and installed my Mac HD writing Zeros to it
    and still get these problems.
    OK, I see you've given her the ol' "this is going to feel cold and intrusive". Do I take it to mean that you re-installed the OS from the factory disks as well?
    Also, might be time for a firmware refresh.
    Regarding doing Onyx/Disk Warrior "all the time"? I'd suggest that you don't make this a regular practice (I know some people will have my head for saying that). But the reason I say this is that I actually find that Logic feels particularly unwieldy after doing a full Onyx run-through. It takes a couple of Logic crashes before it all sorts itself back out.

  • Why when i set up folders for my photos do they also appear in the photo library can I only have them appear in the folders???

    Why when i set up folders for my photos do they also appear in the photo library can I only have them appear in the folders and not duplicated in the photo library???

    Not sure about the missing photos from the Photo Stream section of 'Recent', however to stop photos populating the events, turn off Automatic Import (iPhoto Preferences > Photo Stream)

  • Why the clock disappears when you recieve a call !!

    Dear iphoners,
    It is really strange why the clock disappears when you receive a call "during ringing" ..
    for me it is really matter to know the time just before I answer .. you can notice that when your phone is ringing , you can't see the time and you are stuck !!
    I'm sure some of you are sharing the same concern .. how can we send this to the developers to solve this issue !!
    just to let you feel my concern .. Imagine yourself sleeping and suddenly someone called you "your Boss", you just woke up and you have no idea what is the time .. its bad to answer and ask the caller what is the time !! .. and its annouing to wait till the phone stop ringing to check the time then you call back !!
    Please let me know if there is a way to solve this .. or at least let’s ask the developers to solve it
    Thanks,
    Muataz

    You can write to Apple about this issue using the feedback form:
    http://www.apple.com/feedback/iphone.html
    Cheers,
    Leann

  • Why when i set my mac in sleep it starts alone and also complete stop without I do anything (Mac mini Mid 2011 - Yosemite)

    Why when i set my mac in sleep it starts alone and also complete stop without I do anything (Mac mini Mid 2011 - Yosemite)

    in response to lllaass
    here what I copied from Console:
    27/12/2014 02:29:58,457 WindowServer[185]: WSGetSurfaceInWindow : Invalid surface 1336265605 for window 268
    27/12/2014 02:30:02,516 WindowServer[185]: WSBindSurface : Invalid surface 1040636110 for window 266
    27/12/2014 02:30:17,370 com.apple.xpc.launchd[1]: assertion failed: 14B25: launchd + 160118 [55B9FF23-B298-321A-B776-CF7676586C04]: 0xe
    27/12/2014 02:30:17,371 com.apple.xpc.launchd[1]: assertion failed: 14B25: launchd + 160118 [55B9FF23-B298-321A-B776-CF7676586C04]: 0xe
    27/12/2014 02:30:18,819 Office365Service[2012]: WARNING: The Gestalt selector gestaltSystemVersion is returning 10.9.1 instead of 10.10.1. Use NSProcessInfo's operatingSystemVersion property to get correct system version number.
    Call location:
    27/12/2014 02:30:18,819 Office365Service[2012]: 0   CarbonCore                          0x901777e7 ___Gestalt_SystemVersion_block_invoke + 135
    27/12/2014 02:30:18,819 Office365Service[2012]: 1   libdispatch.dylib                   0x960dc130 _dispatch_client_callout + 50
    27/12/2014 02:30:18,819 Office365Service[2012]: 2   libdispatch.dylib                   0x960dc0b5 dispatch_once_f + 251
    27/12/2014 02:30:18,819 Office365Service[2012]: 3   libdispatch.dylib                   0x960dd0d8 dispatch_once + 31
    27/12/2014 02:30:18,819 Office365Service[2012]: 4   CarbonCore                          0x90109fb8 _Gestalt_SystemVersion + 1050
    27/12/2014 02:30:18,819 Office365Service[2012]: 5   CarbonCore                          0x90109b69 Gestalt + 150
    27/12/2014 02:30:18,819 Office365Service[2012]: 6   Office365Service                    0x000589a3 Office365Service + 358819
    27/12/2014 02:30:29,794 warmd[36]: [_bootcachectl_playlist_for_file:3197] Unable to generate playlist for file: 2 No such file or directory
    27/12/2014 02:30:29,794 warmd[36]: [_bootcachectl_playlist_for_file:3197] Unable to generate playlist for file: 2 No such file or directory
    27/12/2014 02:30:29,797 warmd[36]: [_bootcachectl_playlist_for_file:3197] Unable to generate playlist for file: 2 No such file or directory
    27/12/2014 02:30:29,797 warmd[36]: [_bootcachectl_playlist_for_file:3197] Unable to generate playlist for file: 2 No such file or directory
    27/12/2014 02:30:29,797 warmd[36]: [_bootcachectl_playlist_for_file:3197] Unable to generate playlist for file: 2 No such file or directory
    27/12/2014 02:30:29,799 warmd[36]: [_bootcachectl_playlist_for_file:3197] Unable to generate playlist for file: 2 No such file or directory
    27/12/2014 02:30:29,801 warmd[36]: [_bootcachectl_playlist_for_file:3197] Unable to generate playlist for file: 2 No such file or directory
    27/12/2014 02:30:30,870 xscertd-helper[2020]: ldap_search_ext_s returned -1 - Can't contact LDAP server when searching for bdb suffix, exiting
    27/12/2014 02:30:30,883 com.apple.xpc.launchd[1]: (com.apple.xscertadmin[2020]) Service exited with abnormal code: 1
    27/12/2014 02:30:30,928 coreaudiod[1249]: 2014-12-27 02:30:30.927642 AM [AirPlay] Power: SystemWillSleep
    27/12/2014 02:30:30,928 coreaudiod[1249]: 2014-12-27 02:30:30.927798 AM [AirPlay] BTLE client stopping to browse for AirPlay Solo Target Presence.
    27/12/2014 02:30:30,928 coreaudiod[1249]: 2014-12-27 02:30:30.928007 AM [AirPlay] BTLE discovery removing all devices
    27/12/2014 02:30:30,929 coreaudiod[1249]: 2014-12-27 02:30:30.929458 AM [AirPlay] BTLE client stopped to browse for AirPlay Solo Target Presence.
    27/12/2014 02:30:30,931 watchdogd[162]: [watchdog_daemon] @(         pm_callback) - ref=0x0 msg_type=0xe0000280 msg=0x2a0005
    27/12/2014 02:30:30,931 watchdogd[162]: [watchdog_daemon] @(    wd_daemon_thread) - events buffer: 65r1069 3634s1069
    27/12/2014 02:30:30,965 Office365Service[2012]: System shutdown notification
    27/12/2014 02:30:31,001 WindowServer[185]: device_generate_desktop_screenshot: authw 0x0(0), shield 0x7fbf43423ed0(2001)
    27/12/2014 02:30:31,044 identityservicesd[1311]: <IMMacNotificationCenterManager: 0x7ffac2c4fef0>: notification observer: com.apple.iChat   notification: __CFNotification 0x7ffac2d4efa0 {name = _NSDoNotDisturbEnabledNotification}
    27/12/2014 02:30:31,044 imagent[1305]: <IMMacNotificationCenterManager: 0x7fde8a42c1e0>: notification observer: com.apple.FaceTime   notification: __CFNotification 0x7fde8a54a860 {name = _NSDoNotDisturbEnabledNotification}
    27/12/2014 02:30:31,089 WindowServer[185]: device_generate_lock_screen_screenshot: authw 0x0(0)[inf, inf, 0, 0] shield 0x7fbf43423ed0(2001), dev [1680,1050]
    27/12/2014 02:30:31,000 kernel[0]: PM response took 168 ms (1194, UserEventAgent)
    27/12/2014 02:30:31,105 WindowServer[185]: device_generate_desktop_screenshot: authw 0x0(0), shield 0x7fbf43423ed0(2001)
    27/12/2014 02:30:31,180 apsd[59]: Peer [pid=1203] requested push wake but lacks APSPushWakeEntitlement
    27/12/2014 02:30:31,228 imagent[1305]: <IMMacNotificationCenterManager: 0x7fde8a42c1e0>:    NC Disabled: NO
    27/12/2014 02:30:31,228 identityservicesd[1311]: <IMMacNotificationCenterManager: 0x7ffac2c4fef0>:    NC Disabled: NO
    27/12/2014 02:30:31,237 imagent[1305]: <IMMacNotificationCenterManager: 0x7fde8a42c1e0>:   DND Enabled: YES
    27/12/2014 02:30:31,237 identityservicesd[1311]: <IMMacNotificationCenterManager: 0x7ffac2c4fef0>:   DND Enabled: YES
    27/12/2014 02:30:31,237 imagent[1305]: <IMMacNotificationCenterManager: 0x7fde8a42c1e0>: Updating enabled: NO   (Topics: (null))
    27/12/2014 02:30:31,237 identityservicesd[1311]: <IMMacNotificationCenterManager: 0x7ffac2c4fef0>: Updating enabled: NO   (Topics: (null))
    27/12/2014 02:30:31,237 identityservicesd[1311]: <IMMacNotificationCenterManager: 0x7ffac2e30040>: notification observer: com.apple.iChat   notification: __CFNotification 0x7ffac2c43f40 {name = _NSDoNotDisturbEnabledNotification}
    27/12/2014 02:30:31,244 identityservicesd[1311]: <IMMacNotificationCenterManager: 0x7ffac2e30040>:    NC Disabled: NO
    27/12/2014 02:30:31,249 identityservicesd[1311]: <IMMacNotificationCenterManager: 0x7ffac2e30040>:   DND Enabled: YES
    27/12/2014 02:30:31,249 identityservicesd[1311]: <IMMacNotificationCenterManager: 0x7ffac2e30040>: Updating enabled: NO   (Topics: (null))
    27/12/2014 02:30:31,000 kernel[0]: PM response took 347 ms (71, blued)
    27/12/2014 02:30:49,000 kernel[0]: PM response took 3456 ms (31, powerd)
    27/12/2014 02:30:49,000 kernel[0]: Failed to get hibernate image filename
    27/12/2014 02:30:49,000 kernel[0]: AirPort_Brcm43xx::powerChange: System Sleep
    All that is really chinese for me Do you know where i could get anything to be teached about all that
    Thanks

  • Photoshop CS6: Why is ACR set to 240 ppi by default, and not 300 ppi?

    Does anybody have any idea as to why ACR is set to 240 ppi by default? Isn't 300 ppi the optimum setting for printing purposes? Is there a good reason, or reasons, why Adobe chose 240 ppi as the default setting?
    I'd like to know if it is advisable to change ACR's settings from this default 240 ppi to 300 ppi. I know any perceived difference, when it comes to printing images, may be negligible, but why not, if it is just a matter of simply changing it to 300 ppi permanently?
    I am uneasy about changing this, however, until I find out a lot more about it, as I want the best quality, and if there are undesirable consequences by changing ACR to 300 ppi that I am not aware about, and, therefore, why Adobe have it set it to 240 ppi, then I'll leave it at the default setting.

    Hi,
    Setting this value to 240, 300 or whatever else will not change anything. The TIF or JPEG file generated from the RAW file will just have a metadata field containing this value (actually, there are 2 fields : XResolution and YResolution, usually set to the same value). The rest of the file will remain unchanged. Two files generated from the same RAW one at 240 dpi and the other at 300 dpi will only differ by that field.
    When you load the file in PS (or when ACR transmits a raw image to the PS bitmap engine along with its metadata), the dpi value found in the metadata will only affect the default values that will be used in the File | Print dialog, Position and Size section. By default, PS will compute the printed size of the document according to the indication given in the XResolution/YResolution field. If you change the desired dimension or if you "scale to fit", the dpi resolution will change.
    The dpi value specified in ACR or in any other software is only an indication. It never affects the image itself. Actually, this dpi value has no meaning until the image is "realized". A dpi value only makes sense when the pixel are transformed into ink dots in a printer or to display pixels on a screen. Until then, this value has no meaning.
    Moreover, in Lightroom (which makes printing much more easy than in PS), it is actually recommended to not specify any dpi value. That field should usually be left blank. You specify the print target dimensions and LR will automatically compute the right dpi value.

  • HT204074 Why did apple set a 90 day lock out to apple devices?

    Why did apple set a 90 day lock out to apple devices? I bought my dad a new iphone 5s. He decided to give me his old iphone 4s but i cant download my purchased programs from my apple ID. I got a notification saying that the phone is associated/identified with another apple ID then automatically locked my apple id for 90days. I dont understand why they had to set a 90 day timer.

    "Why did apple set a 90 day lock out to apple devices?"
    No one can tell you why Apple makes the decions that they do and discussing their decisions/policies is not allowed here.

  • HT201303 Why we should set those security questions while buying movies?

    Why we should set those security questions while buying movies? 
    Can we skip those personal questions?
    Why can't we make our own ones?
    This makes me feel uncomfortible because I am forced to do that.

    Thanks HACKINT0SH.
    Any chance to make our own questions? Per-defined questions may not always link to personal background well and in that case people will easily forget those answers.
    If the answer is no, anyway to pass the feedback to Apple and tell them not to do secure but stupid things?

Maybe you are looking for