Why is craigslist extremely slow? tried multiples browsers

I have tried chrome/safari/firefox. It is slow loading. All other websites work prefect

Heavy demand on their servers maybe. Heavy demand on the routers and other nodes between you and the Graig's List servers maybe. Who knows? Try a trace to their servers and see if there is a bottleneck in the route.

Similar Messages

Craigslist extremely slow with Airport Extreme

Odd problem - Got an airport extreme last week. Each of the hundreds of web sites I visit on a daily basis loads fine, except craigslist, which is extremely slow to load every page and every image etc. I can browse craigslist easily on the same laptop in other locations. How can I fix?

Thanks. If the problem occurs on every Mac or other device using that base station, there really is not anything else worth checking. It could be a DNS problem associated with your ISP, or it could be a corrupted parameter in the base station. To fix the latter would require a "hard reset" followed by configuring it again:
To "hard reset" an AirPort Base Station: make sure it's powered up, then press and hold its tiny reset button and keep it depressed for five to ten seconds, long enough for its LED to flash amber rapidly. Release the reset button. Then, the LED will glow amber steadily for about a minute. Then, it will flash amber, slowly, about once every second or two, waiting for you to configure it with AirPort Utility.
If the slow page loads still occur, you might temporarily try a public DNS such as OpenDNS, which will bypass the DNS your ISP uses. You can try that before or after resetting the base station.

Zoom (Accessibility feature) is extremely slow with multiple monitors [OSX 10.10]

When connecting an external display to my Laptop and using the "Ctrl + Scroll" functionality for accessibility zooming, the display/graphics are extremely slow.
An estimate of FPS would be sub 1FPS. The machine becomes unresponsive and is unusable for a minute or so, until I can get it zoomed back out, and it begins responding normally.
This is very disruptive, as its a feature I use often.
The same laptop on OSX 10.9 did not exhibit this issue.
Hardware: MacBook Pro 13" Retina Mid 2014, 16GB Ram
Software: OSX Yosemite 10.10
System Information: http://cl.ly/image/0H1p032w0M0w
Reproduction steps:
1. Enable CTRL+SCROLL zoom functionality in System Preferences > Accessibility
2. Connect external monitor (Display port cable)
3. Hold CTRL and Scroll to zoom
4. System becomes slow, graphics slow, showing < 1 FPS without any other applications running

Just to note, I have the same problem....
When you use Thunderbolt display with 15" MB Pro late 2013, it zooms unreasonably slow.
But when you close the laptop display and only have the Thunderbolt display on, it zooms a bit faster, but still too slow for such a new laptop.
I think it could be optimised a bit better, something somewhere can be improved here.
Regards,
Ned

Why is Firefox much slower than other browsers.

Using Speedtest.net I've noticed that Firefox is running at around 6meg, whereas other browsers run at the correct 20meg.
Any ideas what could be wrong, as this never used to be the case.

I've been doing a bit of testing. If I restart in safe mode, it works as it should, full speed. But I've tried disabling all the add-ons manually, and it's back to a third of the speed. Weird!!

Is your Mail extremely slow trying to send to a "group" from Contacts?

I can't believe how long this is taking to just add a couple groups from my Contacts into the To: area of a message in Mail. I've never had this problem with my older 10.6.8 OS. There are about 150 addresses in one group and less than 10 in another, yet, once I type in the group name, everything slows down to a snails pace in Mail and I can't type one letter without having the beachball of death start spinning. This is ridiculous! Is anyone else having these kinds of problems? Generally Mail in Mavericks has been working well for me - the amount of spam has decreased tremendously, but this new issue is a big problem!
Thanks for any insight,
kt

I am climbing the walls with this.
I have to type the text of the mail, then insert the group.
Forgot about changing anything later or adding a second group.
It takes several minutes to change one character.
Activity Monitorshows "Mail (Not Responding)", CPU running 99.9%
Crazy.

Why operates Indesign extremly slow under Win7/64 bit?

It seems that Indesign is operating from the harddirve only although I am running a fast (new) computer with 6 GB RAM. When I type a word each character takes seconds to be displayed and the harddrive is working like mad - according to the noice.

Guymuc wrote:
It seems that Indesign is operating from the harddirve only although I am running a fast (new) computer with 6 GB RAM. When I type a word each character takes seconds to be displayed and the harddrive is working like mad - according to the noice.
What antivirus software ?
robin
www.adobescripts.co.uk

Extremly slow Macbook pro. upgrade or change?

Hello,
I am using a macbook pro (late 2011) 2.4 Ghz, 512GB HD, 4 GB Ram with Mavericks.
Lately it is going extremely slow and the software I am using (Finale, Ableton) are running badly and very slow.
I am wondering what is best...to upgrade to 16GB Ram with 512GB SSD? or switching to a newer model?
Also any ideas why it goes extremely slow sudenly? I tried erase and install recently, no change. Speed Disk test gives me 70MB/s Read 70MB/s write.
thanks a lot

1. This procedure is a diagnostic test. It changes nothing, for better or worse, and therefore will not, in itself, solve the problem. But with the aid of the test results, the solution may take a few minutes, instead of hours or days.
Don't be put off by the complexity of these instructions. The process is much less complicated than the description. You do harder tasks with the computer all the time.
2. If you don't already have a current backup, back up all data before doing anything else. The backup is necessary on general principle, not because of anything in the test procedure. Backup is always a must, and when you're having any kind of trouble with the computer, you may be at higher than usual risk of losing data, whether you follow these instructions or not.
There are ways to back up a computer that isn't fully functional. Ask if you need guidance.
3. Below are instructions to run a UNIX shell script, a type of program. As I wrote above, it changes nothing. It doesn't send or receive any data on the network. All it does is to generate a human-readable report on the state of the computer. That report goes nowhere unless you choose to share it. If you prefer, you can act on it yourself without disclosing the contents to me or anyone else.
You should be wondering whether you can believe me, and whether it's safe to run a program at the behest of a stranger. In general, no, it's not safe and I don't encourage it.
In this case, however, there are a couple of ways for you to decide whether the program is safe without having to trust me. First, you can read it. Unlike an application that you download and click to run, it's transparent, so anyone with the necessary skill can verify what it does.
You may not be able to understand the script yourself. But variations of the script have been posted on this website thousands of times over a period of years. The site is hosted by Apple, which does not allow it to be used to distribute harmful software. Any one of the millions of registered users could have read the script and raised the alarm if it was harmful. Then I would not be here now and you would not be reading this message.
Nevertheless, if you can't satisfy yourself that these instructions are safe, don't follow them. Ask for other options.
4. Here's a summary of what you need to do, if you choose to proceed:
☞ Copy a line of text in this window to the Clipboard.
☞ Paste into the window of another application.
☞ Wait for the test to run. It usually takes a few minutes.
☞ Paste the results, which will have been copied automatically, back into a reply on this page.
The sequence is: copy, paste, wait, paste again. You don't need to copy a second time. Details follow.
5. You may have started the computer in "safe" mode. Preferably, these steps should be taken in “normal” mode, under the conditions in which the problem is reproduced. If the system is now in safe mode and works well enough in normal mode to run the test, restart as usual. If you can only test in safe mode, do that.
6. If you have more than one user, and the one affected by the problem is not an administrator, then please run the test twice: once while logged in as the affected user, and once as an administrator. The results may be different. The user that is created automatically on a new computer when you start it for the first time is an administrator. If you can't log in as an administrator, test as the affected user. Most personal Macs have only one user, and in that case this section doesn’t apply. Don't log in as root.
7. The script is a single long line, all of which must be selected. You can accomplish this easily by triple-clicking anywhere in the line. The whole line will highlight, though you may not see all of it in the browser window, and you can then copy it. If you try to select the line by dragging across the part you can see, you won't get all of it.
Triple-click anywhere in the line of text below on this page to select it:
PATH=/usr/bin:/bin:/usr/sbin:/sbin:/usr/libexec;clear;cd;p=(Software Hardware Memory Diagnostics Power FireWire Thunderbolt USB Fonts SerialATA 4 1000 25 5120 KiB/s 1024 85 \\b%% 20480 1 MB/s 25000 ports ' com.clark.\* \*dropbox \*GoogleDr\* \*k.AutoCAD\* \*k.Maya\* vidinst\* ' DYLD_INSERT_LIBRARIES\ DYLD_LIBRARY_PATH -86 "` route -n get default|awk '/e:/{print $2}' `" 25 N\\/A down up 102400 25600 recvfrom sendto CFBundleIdentifier 25 25 25 1000 MB com.apple.AirPortBaseStationAgent 464843899 51 5120 files );N5=${#p[@]};p[N5]=` networksetup -listnetworkserviceorder|awk ' NR>1 { sub(/^$[0-9]+$ /,"");n=$0;getline;} $NF=="'${p[26]}')" { sub(/.$/,"",$NF);print n;exit;} ' `;f=('\n%s: %s\n' '\n%s\n\n%s\n' '\nRAM details\n%s\n' %s\ %s '%s\n-\t%s\n' );S0() { echo ' { q=$NF+0;$NF="";u=$(NF-1);$(NF-1)="";gsub(/^ +| +$/,"");if(q>='${p[$1]}') printf("%s (UID %s) is using %s '${p[$2]}'",$0,u,q);} ';};s=(' /^ *$|CSConfigDot/d;s/^ */ /;s/[-0-9A-Fa-f]{22,}/UUID/g;s/(ochat)\.[^.]+(\..+)/\1\2/;/Shared/!s/\/Users\/[^/]+/~/g ' ' s/^ +//;/de: S|[nst]:/p;' ' {sub(/^ +/,"")};/er:/;/y:/&&$2<'${p[10]} ' 1s/://;3,6d;/[my].+:/d;s/^ {4}//;H;${ g;s/\n$//;/s: [^EO]|x([^08]|02[^F]|8[^0])/p;} ' ' 5h;6{ H;g;/P/!p;} ' ' ($1~/^Cy/&&$3>'${p[11]}')||($1~/^Cond/&&$2!~/^N/) ' ' /:$/{ N;/:.+:/d;s/ *://;b0'$'\n'' };/^ *(V.+ [0N]|Man).+ /{ s/ 0x.... //;s/[()]//g;s/(.+: )(.+)/ (\2)/;H;};$b0'$'\n'' d;:0'$'\n'' x;s/\n\n//;/Apple[ ,]|Genesy|Intel|SMSC/d;s/\n.*//;/\)$/p;' ' s/^.*C/C/;H;${ g;/No th|pms/!p;} ' '/= [^GO]/p' '{$1=""};1' ' /Of/!{ s/^.+is |\.//g;p;} ' ' $0&&!/ / { n++;print;} END { if(n<200) print "com.apple.";} ' ' $3~/[0-9]:[0-9]{2}$/ { gsub(/:[0-9:a-f]{14}/,"");} { print|"tail -n'${p[12]}'";} ' ' NR==2&&$4<='${p[13]}' { print $4;} ' ' END { $2/=256;if($2>='${p[15]}') print int($2) } ' ' NR!=13{next};{sub(/[+-]$/,"",$NF)};'"`S0 21 22`" 'NR!=2{next}'"`S0 37 17`" ' NR!=5||$8!~/[RW]/{next};{ $(NF-1)=$1;$NF=int($NF/10000000);for(i=1;i<=3;i++){$i="";$(NF-1-i)="";};};'"`S0 19 20`" 's:^:/:p' '/\.kext\/(Contents\/)?Info\.plist$/p' 's/^.{52}(.+) <.+/\1/p' ' /Launch[AD].+\.plist$/ { n++;print;} END { print "'${p[41]}'";if(n<200) print "/System/";} ' '/\.xpc\/(Contents\/)?Info\.plist$/p' ' NR>1&&!/0x|\.[0-9]+$|com\.apple\.launchctl\.(Aqua|Background|System)$|'${p[41]}'/ { print $3;} ' ' /\.(framew|lproj)|\):/d;/plist:|:.+(Mach|scrip)/s/:[^:]+//p ' '/^root$/p' ' !/\/Contents\/.+\/Contents|Applic|Autom|Frameworks/&&/Lib.+\/Info.plist$/ { n++;print;} END { if(n<1100) print "/System/";} ' '/^\/usr\/lib\/.+dylib$/p' ' /Temp|emac/{next};/(etc|Preferences|Launch[AD].+)\// { sub(".(/private)?","");n++;print;} END { print "'${p[41]}'.plist\t'${p[42]}'";if(n<500) print "Launch";} ' ' /\/(Contents\/.+\/Contents|Frameworks)\/|\.wdgt\/.+\.([bw]|plu)/d;p;' 's/\/(Contents\/)?Info.plist$//;p' ' { gsub("^| |\n","\\|\\|kMDItem'${p[35]}'=");sub("^...."," ") };1 ' p '{print $3"\t"$1}' 's/\'$'\t''.+//p' 's/1/On/p' '/Prox.+: [^0]/p' '$2>'${p[43]}'{$2=$2-1;print}' ' BEGIN { i="'${p[26]}'";M1='${p[16]}';M2='${p[18]}';M3='${p[31]}';M4='${p[32]}';} !/^A/{next};/%/ { getline;if($5<M1) a="user "$2"%, system "$4"%";} /disk0/&&$4>M2 { b=$3" ops/s, "$4" blocks/s";} $2==i { if(c) { d=$3+$4+$5+$6;next;};if($4>M3||$6>M4) c=int($4/1024)" in, "int($6/1024)" out";} END { if(a) print "CPU: "a;if(b) print "I/O: "b;if(c) print "Net: "c" (KiB/s)";if(d) print "Net errors: "d" packets/s";} ' ' /r\[0\] /&&$NF!~/^1(0|72\.(1[6-9]|2[0-9]|3[0-1])|92\.168)\./ { print $NF;exit;} ' ' !/^T/ { printf "(static)";exit;} ' '/apsd|BKAg|OpenD/!s/:.+//p' ' (/k:/&&$3!~/(255\.){3}0/ )||(/v6:/&&$2!~/A/ ) ' ' $1~"lR"&&$2<='${p[25]}';$1~"li"&&$3!~"wpa2";' ' BEGIN { FS=":";p="uniq -c|sed -E '"'s/ +\$[0-9]+\$\$.+\$/\\\2 x\\\1/;s/x1$//'"'";} { n=split($3,a,".");sub(/_2[01].+/,"",$3);print $2" "$3" "a[n]$1|p;b=b$1;} END { close(p);if(b) print("\n\t* Code injection");} ' ' NR!=4{next} {$NF/=10240} '"`S0 27 14`" ' END { if($3~/[0-9]/)print$3;} ' ' BEGIN { L='${p[36]}';} !/^[[:space:]]*(#.*)?$/ { l++;if(l<=L) f=f"\n "$0;} END { F=FILENAME;if(!F) exit;if(!f) f="\n [N/A]";"file -b "F|getline T;if(T!~/^(AS.+ (En.+ )?text$|(Bo|PO).+ sh.+ text ex)/) F=F" ("T")";printf("\nContents of %s\n%s\n",F,f);if(l>L) printf("\n ...and %s more line(s)\n",l-L);} ' ' s/^ ?n...://p;s/^ ?p...:/-'$'\t''/p;' 's/0/Off/p' ' END{print NR} ' ' /id: N|te: Y/{i++} END{print i} ' ' / / { print "'"${p[28]}"'";exit;};1;' '/ en/!s/\.//p' ' NR!=13{next};{sub(/[+-M]$/,"",$NF)};'"`S0 39 40`" ' $10~/\(L/&&$9!~"localhost" { sub(/.+:/,"",$9);print $1": "$9;} ' '/^ +r/s/.+"(.+)".+/\1/p' 's/(.+\.wdgt)\/(Contents\/)?Info\.plist$/\1/p' 's/^.+\/(.+)\.wdgt$/\1/p' ' /l: /{ /DVD/d;s/.+: //;b0'$'\n'' };/s: /{ /V/d;s/^ */- /;H;};$b0'$'\n'' d;:0'$'\n'' x;/APPLE [^:]+$/d;p;' ' /^find: /d;p;' "`S0 44 45`" ' BEGIN{FS="= "} /Path/{print $2} ' );c1=(system_profiler pmset\ -g nvram fdesetup find syslog df vm_stat sar ps sudo\ crontab sudo\ iotop top pkgutil 'PlistBuddy 2>&1 -c "Print' whoami cksum kextstat launchctl sudo\ launchctl crontab 'sudo defaults read' stat lsbom mdfind ' for i in ${p[24]};do ${c1[18]} ${c2[27]} $i;done;' defaults\ read scutil sudo\ dtrace sudo\ profiles sed\ -En awk /S*/*/P*/*/*/C*/*/airport networksetup mdutil sudo\ lsof test osascript\ -e );c2=(com.apple.loginwindow\ LoginHook '" /L*/P*/loginw*' "'tell app \"System Events\" to get properties of login items'|tr , \\\n" 'L*/Ca*/com.ap*.Saf*/E*/* -d 1 -name In*t -exec '"${c1[14]}"' :CFBundleDisplayName" {} \;|sort|uniq' '~ $TMPDIR.. $ -flags +sappnd,schg,uappnd,uchg -o ! -user $UID -o ! -perm -600 $' '.??* -path .Trash -prune -o -type d -name *.app -print -prune' :${p[35]}\" :Label\" '{/,}L*/{Con,Pref}* -type f ! -size 0 -name *.plist -exec plutil -s {} \;' "-f'%N: %l' Desktop L*/Keyc*" therm sysload boot-args status " -F '\$Time \$Message' -k Sender kernel -k Message Req 'bad |Beac|caug|dead[^bl]|FAIL|fail|GPU |hfs: Ru|inval|jnl:|last value [1-9]|n Cause: -|NVDA$|pagin|proc: t|Roamed|rror|ssert|Thrott|tim(ed? ?|ing )o|WARN' -k Message Rne 'Goog|ksadm|SMC:| VALI|xpma' -o -k Sender fseventsd -k Message Req 'SL' " '-du -n DEV -n EDEV 1 10' 'acrx -o comm,ruid,%cpu' '-t1 10 1' '-f -pfc /var/db/r*/com.apple.*.{BS,Bas,Es,J,OSXU,Rem,up}*.bom' '{/,}L*/Lo*/Diag* -type f -regex .\*[cgh] ! -name *ag \( -exec grep -lq "^Thread c" {} \; -exec printf \* \; -o -true $ -execdir stat -f:%Sc:%N -t%F {} \;|sort -t: -k2 |tail -n'${p[38]} '-L {/{S*/,},}L*/Lau* -type f' '-L /{S*/,}L*/StartupItems -type f -exec file {} +' '-L /S*/L*/{C*/Sec*A,E}* {/,}L*/{A*d,Ca*/*/Ex,Co{mpon,reM},Ex,Inter,iTu*/*P,Keyb,Mail/B,Pr*P,Qu*T,Scripti,Sec,Servi,Spo,Widg}* -path \\*s/Resources -prune -o -type f -name Info.plist' '/usr/lib -type f -name *.dylib' `awk "${s[31]}"<<<${p[23]}` "/e*/{auto,{cron,fs}tab,hosts,{[lp],sy}*.conf,pam.d/*,ssh{,d}_config,*.local} {,/usr/local}/etc/periodic/*/* /L*/P*{,/*}/com.a*.{Bo,sec*.ap}*t /S*/L*/Lau*/*t .launchd.conf" list getenv /Library/Preferences/com.apple.alf\ globalstate --proxy '-n get default' -I --dns -getdnsservers\ "${p[N5]}" -getinfo\ "${p[N5]}" -P -m\ / '' -n1 '-R -l1 -n1 -o prt -stats command,uid,prt' '--regexp --only-files --files com.apple.pkg.*|sort|uniq' -kl -l -s\ / '-R -l1 -n1 -o mem -stats command,uid,mem' '+c0 -i4TCP:0-1023' com.apple.dashboard\ layer-gadgets '-d /L*/Mana*/$USER&&echo On' '-app Safari WebKitDNSPrefetchingEnabled' "+c0 -l|awk '{print(\$1,\$3)}'|sort|uniq -c|sort -n|tail -1|awk '{print(\$2,\$3,\$1)}'" );N1=${#c2[@]};for j in {0..9};do c2[N1+j]=SP${p[j]}DataType;done;N2=${#c2[@]};for j in 0 1;do c2[N2+j]="-n ' syscall::'${p[33+j]}':return { @out[execname,uid]=sum(arg0) } tick-10sec { trunc(@out,1);exit(0);} '";done;l=(Restricted\ files Hidden\ apps 'Elapsed time (s)' POST Battery Safari\ extensions Bad\ plists 'High file counts' User Heat System\ load boot\ args FileVault Diagnostic\ reports Log 'Free space (MiB)' 'Swap (MiB)' Activity 'CPU per process' Login\ hook 'I/O per process' Mach\ ports kexts Daemons Agents launchd Startup\ items Admin\ access Root\ access Bundles dylibs Apps Font\ issues Inserted\ dylibs Firewall Proxies DNS TCP/IP Wi-Fi Profiles Root\ crontab User\ crontab 'Global login items' 'User login items' Spotlight Memory Listeners Widgets Parental\ Controls Prefetching SATA Descriptors );N3=${#l[@]};for i in 0 1 2;do l[N3+i]=${p[5+i]};done;N4=${#l[@]};for j in 0 1;do l[N4+j]="Current ${p[29+j]}stream data";done;A0() { id -G|grep -qw 80;v[1]=$?;((v[1]==0))&&sudo true;v[2]=$?;v[3]=`date +%s`;clear >&-;date '+Start time: %T %D%n';};for i in 0 1;do eval ' A'$((1+i))'() { v=` eval "${c1[$1]} ${c2[$2]}"|'${c1[30+i]}' "${s[$3]}" `;[[ "$v" ]];};A'$((3+i))'() { v=` while read i;do [[ "$i" ]]&&eval "${c1[$1]} ${c2[$2]}" \"$i\"|'${c1[30+i]}' "${s[$3]}";done<<<"${v[$4]}" `;[[ "$v" ]];};A'$((5+i))'() { v=` while read i;do '${c1[30+i]}' "${s[$1]}" "$i";done<<<"${v[$2]}" `;[[ "$v" ]];};';done;A7(){ v=$((`date +%s`-v[3]));};B2(){ v[$1]="$v";};for i in 0 1;do eval ' B'$i'() { v=;((v['$((i+1))']==0))||{ v=No;false;};};B'$((3+i))'() { v[$2]=`'${c1[30+i]}' "${s[$3]}"<<<"${v[$1]}"`;} ';done;B5(){ v[$1]="${v[$1]}"$'\n'"${v[$2]}";};B6() { v=` paste -d: <(printf "${v[$1]}") <(printf "${v[$2]}")|awk -F: ' {printf("'"${f[$3]}"'",$1,$2)} ' `;};B7(){ v=`grep -Fv "${v[$1]}"<<<"$v"`;};C0(){ [[ "$v" ]]&&echo "$v";};C1() { [[ "$v" ]]&&printf "${f[$1]}" "${l[$2]}" "$v";};C2() { v=`echo $v`;[[ "$v" != 0 ]]&&C1 0 $1;};C3() { v=`sed -E "$s"<<<"$v"`&&C1 1 $1;};for i in 1 2;do for j in 0 2 3;do eval D$i$j'(){ A'$i' $1 $2 $3; C'$j' $4;};';done;done;{ A0;D20 0 $((N1+1)) 2;D10 0 $N1 1;B0;C2 27;B0&&! B1&&C2 28;D12 15 37 25 8;A1 0 $((N1+2)) 3;C0;D13 0 $((N1+3)) 4 3;D23 0 $((N1+4)) 5 4;D13 0 $((N1+9)) 59 50;for i in 0 1 2;do D13 0 $((N1+5+i)) 6 $((N3+i));done;D13 1 10 7 9;D13 1 11 8 10;D22 2 12 9 11;D12 3 13 10 12;D23 4 19 44 13;D23 5 14 12 14;D22 6 36 13 15;D22 7 37 14 16;D23 8 15 38 17;D22 9 16 16 18;B1&&{ D22 35 49 61 51;D22 11 17 17 20;for i in 0 1;do D22 28 $((N2+i)) 45 $((N4+i));done;};D22 12 44 54 45;D22 12 39 15 21;A1 13 40 18;B2 4;B3 4 0 19;A3 14 6 32 0;B4 0 5 11;A1 17 41 20;B7 5;C3 22;B4 4 6 21;A3 14 7 32 6;B4 0 7 11;B3 4 0 22;A3 14 6 32 0;B4 0 8 11;B5 7 8;B1&&{ A2 19 26 23;B7 7;C3 23;};A2 18 26 23;B7 7;C3 24;A2 4 20 21;B7 6;B2 9;A4 14 7 52 9;B2 10;B6 9 10 4;C3 25;D13 4 21 24 26;B4 4 12 26;B3 4 13 27;A1 4 22 29;B7 12;B2 14;A4 14 6 52 14;B2 15;B6 14 15 4;B3 0 0 30;C3 29;A1 4 23 27;B7 13;C3 30;D13 24 24 32 31;D13 25 37 32 33;A2 23 18 28;B2 16;A2 16 25 33;B7 16;B3 0 0 34;B2 21;A6 47 21&&C0;B1&&{ D13 21 0 32 19;D13 10 42 32 40;D22 29 35 46 39;};D23 14 1 62 42;D12 34 43 53 44;D22 0 $((N1+8)) 51 32;D13 4 8 41 6;D12 26 28 35 34;D13 27 29 36 35;A2 27 32 39&&{ B2 19;A2 33 33 40;B2 20;B6 19 20 3;};C2 36;D23 33 34 42 37;B1&&D23 35 45 55 46;D23 32 31 43 38;D12 36 47 32 48;D13 20 42 32 41;D13 37 2 48 43;D13 4 5 32 1;D13 4 3 60 5;D12 26 48 49 49;B3 4 22 57;A1 26 46 56;B7 22;B3 0 0 58;C3 47;D22 4 4 50 0;D23 22 9 37 7;A7;C2 2;} 2>/dev/null|pbcopy;exit 2>&-
Copy the selected text to the Clipboard by pressing the key combination command-C.
8. Launch the built-in Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
Click anywhere in the Terminal window and paste by pressing command-V. The text you pasted should vanish immediately. If it doesn't, press the return key.
9. If you see an error message in the Terminal window such as "Syntax error" or "Event not found," enter
exec bash
and press return. Then paste the script again.
10. If you're logged in as an administrator, you'll be prompted for your login password. Nothing will be displayed when you type it. You will not see the usual dots in place of typed characters. Make sure caps lock is off. Type carefully and then press return. You may get a one-time warning to be careful. If you make three failed attempts to enter the password, the test will run anyway, but it will produce less information. In most cases, the difference is not important. If you don't know the password, or if you prefer not to enter it, press the key combination control-C or just press return three times at the password prompt. Again, the script will still run.
If you're not logged in as an administrator, you won't be prompted for a password. The test will still run. It just won't do anything that requires administrator privileges.
11. The test may take a few minutes to run, depending on how many files you have and the speed of the computer. A computer that's abnormally slow may take longer to run the test. While it's running, there will be nothing in the Terminal window and no indication of progress. Wait for the line
[Process completed]
to appear. If you don't see it within half an hour or so, the test probably won't complete in a reasonable time. In that case, close the Terminal window and report what happened. No harm will be done.
12. When the test is complete, quit Terminal. The results will have been copied to the Clipboard automatically. They are not shown in the Terminal window. Please don't copy anything from there. All you have to do is start a reply to this comment and then paste by pressing command-V again.
At the top of the results, there will be a line that begins with the words "Start time." If you don't see that, but instead see a mass of gibberish, you didn't wait for the "Process completed" message to appear in the Terminal window. Please wait for it and try again.
If any private information, such as your name or email address, appears in the results, anonymize it before posting. Usually that won't be necessary.
13. When you post the results, you might see an error message on the web page: "You have included content in your post that is not permitted," or "You are not authorized to post." That's a bug in the forum software. Please post the test results on Pastebin, then post a link here to the page you created.
14. This is a public forum, and others may give you advice based on the results of the test. They speak only for themselves, and I don't necessarily agree with them.
Copyright © 2014 by Linc Davis. As the sole author of this work, I reserve all rights to it except as provided in the Use Agreement for the Apple Support Communities website ("ASC"). Readers of ASC may copy it for their own personal use. Neither the whole nor any part may be redistributed.

SetTableLocation EXTREMELY SLOW IN ORACLE


Hi I am using the code below to change my database provider at runtime. 
Unfortunately this line <code>ReportDocument.ReportClientDocument.DatabaseController.SetTableLocation</code> is extremely slow trying to change table location in Oracle. It takes 2 or more seconds per table so it is unacceptable for us.
Please I need a solution as soon as possible. 
It is weird, becaus with SqlServer it works fine! so I don't understand what's the problem with CrystalReports and Oracle. 
Ther is anyone who have a solution? 
We are using: CrystalReports 12, Oracle 10, 11. 
Thank you very much.

<code>
public partial class _Default : System.Web.UI.Page 
{ 
 protected void Page_Load(object sender, EventArgs e) 
 { 
 ReportDocument report = this.ChangeConnectionInfo(); 
 this.CrystalReportViewer1.ReportSource=report; 
 this.CrystalReportViewer1.RefreshReport(); 
 } 
 
 private ReportDocument ChangeConnectionInfo() 
 { 
 ReportDocument boReportDocument = new ReportDocument(); 
 string reportFileName = Server.MapPath("CrystalReport1.rpt"); 
 //*EDIT* Change the path and report name to the report you want to change. 
 boReportDocument.Load(reportFileName, OpenReportMethod.OpenReportByTempCopy); 
 
 //Create a new Database Table to replace the reports current table. 
 CrystalDecisions.ReportAppServer.DataDefModel.Table boTable = new CrystalDecisions.ReportAppServer.DataDefModel.Table(); 
 
 //boMainPropertyBag: These hold the attributes of the tables ConnectionInfo object 
 PropertyBag boMainPropertyBag = new PropertyBag(); 
 //boInnerPropertyBag: These hold the attributes for the QE_LogonProperties 
 //In the main property bag (boMainPropertyBag) 
 PropertyBag boInnerPropertyBag = new PropertyBag(); 
 
 //Set the attributes for the boInnerPropertyBag 
 boInnerPropertyBag.Add("Data Source", "oracle1"); 
 boInnerPropertyBag.Add("Locale Identifier", "3082"); 
 boInnerPropertyBag.Add("OLE DB Services", "-5"); 
 boInnerPropertyBag.Add("Provider", "MSDAORA"); 
 boInnerPropertyBag.Add("Use DSN Default Properties", "False"); 
 
 //Set the attributes for the boMainPropertyBag 
 boMainPropertyBag.Add("Database DLL", "crdb_ado.dll"); 
 boMainPropertyBag.Add("QE_DatabaseName", ""); 
 boMainPropertyBag.Add("QE_DatabaseType", "OLE DB (ADO)"); 
 //Add the QE_LogonProperties we set in the boInnerPropertyBag Object 
 boMainPropertyBag.Add("QE_LogonProperties", boInnerPropertyBag); 
 boMainPropertyBag.Add("QE_ServerDescription", "oracle1"); 
 boMainPropertyBag.Add("QE_SQLDB", "True"); 
 boMainPropertyBag.Add("SSO Enabled", "False"); 
 
 //Create a new ConnectionInfo object 
 CrystalDecisions.ReportAppServer.DataDefModel.ConnectionInfo boConnectionInfo = new CrystalDecisions.ReportAppServer.DataDefModel.ConnectionInfo(); 
 //Pass the database properties to a connection info object 
 boConnectionInfo.Attributes = boMainPropertyBag; 
 //Set the connection kind 
 boConnectionInfo.Kind = CrConnectionInfoKindEnum.crConnectionInfoKindCRQE; 
 //*EDIT* Set the User Name and Password if required. 
 boConnectionInfo.UserName = "oracle"; 
 boConnectionInfo.Password = "oracle"; 
 //Pass the connection information to the table 
 boTable.ConnectionInfo = boConnectionInfo; 
 
 //Get the Database Tables Collection for your report 
 CrystalDecisions.ReportAppServer.DataDefModel.Tables boTables; 
 boTables = boReportDocument.ReportClientDocument.DatabaseController.Database.Tables; 
 
 //For each table in the report: 
 // - Set the Table Name properties. 
 // - Set the table location in the report to use the new modified table 
 boTable.Name = "TABLE1"; 
 boTable.QualifiedName = "SCHEMA1.TABLE1"; 
 boTable.Alias = "TABLE1"; 
 
 
 // 
 //THIS LINE IS EXTREMELY SLOW IN ORACLE 
 // 
 boReportDocument.ReportClientDocument.DatabaseController.SetTableLocation(boTables[0], boTable); 
 
 boReportDocument.VerifyDatabase(); 
 
 
 return boReportDocument; 
 } 
} 
</code>

I have a very similar issue using Crystal XI, and now more recently XI R2 updated through SP6.
My database connections for the report utilize ODBC, which is how our application talks to the database, and provides a connection to crystal.
Oracle version is 10g R2, patched on client with 10.3.
I have a common databaes, in which I have views on many tables. The views depict a collection, and when the report is to run on a different collection I need to change the views on all of the tables (including those in subreports), as well as provide the credentials for connection.
I'm using VStudio2008 C++ with PutLocation( )
First using GetLocation() to find the initial location, then PutLocation to change it
using
IDatabaseTablePtr table;
try {
 strcpy(tableLocation, table->GetLocation());
// make my changes to the table's location (the view)
 table->PutLocation(tableLocation);
catch (_com_error& e) {
// if problems, handle and display errors.
HandleError(NULL, e);
I can have upwards of 20 tables/views in a report, and this can take 1/2 to a full minute to accomplish.
In addition, I optionally provide a user the ability to add criteria and sorting to the report; and perform a table/column collection to show them to the user for seleciton. This same process is used on all views (including those in subreports), so proper data lists can be provided from the correct views.
Does anyone have a solution for this?
Edited by: BobOfPlanet on Mar 3, 2010 5:58 PM

Chat support not working on multiple browsers

Have been trying to start chat sessions throughout the week with no luck. It's been during chat hours, and have tried multiple browsers.
Such long wait times with phone support that I hang up before an answer.
Any response would be greatly appreciated. It's a shame to have such horrible support / customer service with a paid membership.

It's not working for me either.

I just received a brand new iPod touch as a gift. But when I try to play music on it the speaker is extremely slow. When I plug in headphones I hear nothing. Tried multiple headphones. Tried a restore.

I just received a brand new iPod touch as a gift. But when I try to play music on it the speaker is extremely slow. When I plug in headphones I hear nothing. Tried multiple headphones. Tried a restore. It never dropped or anything

Try here:
iPod touch: Hardware troubleshooting
You said you restored the iPod. Was the restore successful, that is, it went though all the steps without errors?
Try a restore to factory settings/new iPod if yuhave not doe so so far.
Are you using the headphones that came with the iPod? Are you inserting the plug fully
Have you tried another set of headphones in the iPod?
The speaker is not that loud.

My forms are extremely slow today (April 28, 2014). Tried different computers, different networks.

My forms are extremely slow today (April 28, 2014). Tried different computers, different networks. Updated to the latest Flesh and used Macs and Windows, differnt browsers, firewalls on and off. NADA. Need help as the clients need to fill them out before May 1!!!!!

We're very sorry that the site is having issues today, we're working hard to resolve ASAP.
I posted an announcement at the top of the Forums which I will update as we recover service.
Thanks,
Josh Corey

Webdav EXTREMELY slow, now trying to connect directly to a WFE bypassing F5 using UNC

We are having problems with Explorer mode being VERY slow in multiple SP farms, (2010 & 2013), and are trying to get to the root of the problem.
We are trying to map a UNC path out directly to a server using something like \\servername\sitecollection\site\library and we can't get it to work. Can anyone tell me how to do that? I know I've done this way back in the past (2007) and assume
that it should still work in 2010 and 2013.
Failing that, can anyone offer any suggestions on things to look for with Explorer Mode being extremely slow? We are getting like 1.15kbs download speeds in EM, where if we just download a document from the site via a Standard View it works just fine.
We've been googling like crazy and having come up with anything so we thought we'd try to take the F5 out of the picture.
We've had several conversations with the networking team, which they claim that they are not throttling webdav in any way, and we can't figure out anything else that would allow webdav to get through, but just be VERY slow.
Thanks.
Ted

Up front, WebDAV connections are slow. To diagnose issues with WebDAV, you would need to introduce packet sniffing on the client and server (using Network Monitor 3.4 is an option).
The Web Application must respond to the name you're trying to map. For example, if the Web Application had an Alternate Access Mapping and IIS Site Binding of "servername", then you could use it. If not, you can't. Generally you do not use server names in
AAMs or IIS Site Bindings.
Trevor Seward
Follow or contact me at...
&nbsp&nbsp
This post is my own opinion and does not necessarily reflect the opinion or view of Microsoft, its employees, or other MVPs.

Why apps cannot be downloaded because of EXTREME SLOW DOWNLOAD SPEEDS?

I have iPad 2 with iOS 6.1.3
Starting from last months until today, I have a big trouble with my iPad about EXTREMELY SLOW APP DOWNLOAD SPEED, in both downloading new apps and updating the currents apps from store.
Only one app can take 1-2 hours to be downloaded. Some times even half day needed. Or sometimes process can finish with fail and says "could not be downloaded at this time"
IT IS PAINFUL !
I checked & did the following below, but I couldn't solve this issue. Please HELP !
- My WIFI internet speed of home network is Great, no problem about that
- I've already used a "Speed Test app" from iPad and it is great, no problem in the speed also
- I've checked the space and more than 30 GB is empty in the device
- I've completely disabled Genius Apps feature
- I tried many times hard reset by long pressing power and home buttons together
Nothing can be solution the the problem. What can be wrong about downloading apps?

How to Fix a Slow iPad
http://ipad.about.com/od/iPad_Troubleshooting/ss/How-To-Fix-A-Slow-iPad.htm
iPad running slow? How to speed up a slow iPad
http://appletoolbox.com/2012/07/ipad-running-slow-how-to-speed-up-a-slow-ipad/
 Cheers, Tom

Why is my MacBook Pro extremely slow

Hi.
My MacBook Pro has recently began to run extremely slow. I have tried several clean up guides from you tube, but so far nothing has helped.
My battery is completely dead, so I only run with the charger connected.
I have done the etreecheck and here are the results:
Problem description:
My Mac is running extremely slow
EtreCheck version: 2.1.6 (109)
Report generated 17. jan. 2015 kl. 14.51.16 CET
Download EtreCheck from http://etresoft.com/etrecheck
Click the [Support] links for help with non-Apple products.
Click the [Details] links for more information about that line.
Click the [Adware] links for help removing adware.
Hardware Information: ℹ️
MacBook Pro (13-inch, Early 2011) (Technical Specifications)
MacBook Pro - model: MacBookPro8,1
1 2.3 GHz Intel Core i5 CPU: 2-core
4 GB RAM Upgradeable
BANK 0/DIMM0
2 GB DDR3 1333 MHz ok
BANK 1/DIMM0
2 GB DDR3 1333 MHz ok
Bluetooth: Old - Handoff/Airdrop2 not supported
Wireless: en1: 802.11 a/b/g/n
Battery Health: Replace Now - Cycle count 80
Video Information: ℹ️
Intel HD Graphics 3000 - VRAM: 384 MB
Color LCD 1280 x 800
System Software: ℹ️
OS X 10.10.1 (14B25) - Time since boot: 7 days 3:2:21
Disk Information: ℹ️
TOSHIBA MK5065GSXF disk0 : (500,11 GB)
EFI (disk0s1) <not mounted> : 210 MB
Recovery HD (disk0s3) <not mounted> [Recovery]: 650 MB
Macintosh HD (disk1) / : 498.88 GB (301.81 GB free)
Encrypted AES-XTS Unlocked
Core Storage: disk0s2 499.25 GB Online
MATSHITADVD-R UJ-898
USB Information: ℹ️
Apple Inc. FaceTime HD Camera (Built-in)
Apple Inc. Apple Internal Keyboard / Trackpad
Apple Inc. BRCM2070 Hub
Apple Inc. Bluetooth USB Host Controller
Apple Computer, Inc. IR Receiver
Thunderbolt Information: ℹ️
Apple Inc. thunderbolt_bus
Gatekeeper: ℹ️
Mac App Store and identified developers
Kernel Extensions: ℹ️
/System/Library/Extensions
[not loaded] com.NovatelWireless.driver.NovatelWirelessUSBCDCECMControl (3.0.9) [Support]
[not loaded] com.NovatelWireless.driver.NovatelWirelessUSBCDCECMData (3.0.9) [Support]
[not loaded] com.ZTE.driver.ZTEUSBCDCACMData (1.3.0) [Support]
[not loaded] com.ZTE.driver.ZTEUSBMassStorageFilter (1.3.0) [Support]
[not loaded] com.bryton.driver.Rider (1 - SDK 10.6) [Support]
[not loaded] com.novamedia.driver.IceraUSB_MSD_Bypass (1.3.0) [Support]
[not loaded] com.zte.driver.cdc_ecm_qmi (1.0.0d1) [Support]
[not loaded] com.zte.driver.cdc_usb_bus (1.0.0d1) [Support]
Launch Agents: ℹ️
[loaded] com.oracle.java.Java-Updater.plist [Support]
Launch Daemons: ℹ️
[failed] com.adobe.fpsaud.plist [Support] [Details]
[loaded] com.oracle.java.Helper-Tool.plist [Support]
[loaded] com.oracle.java.JavaUpdateHelper.plist [Support]
User Launch Agents: ℹ️
[loaded] com.adobe.ARM.[...].plist [Support]
User Login Items: ℹ️
iTunesHelper UNKNOWN Hidden (missing value)
BrytonBridge2 Program Hidden (/Applications/BrytonBridge2/BrytonBridge2.app)
Internet Plug-ins: ℹ️
JavaAppletPlugin: Version: Java 7 Update 71 Check version
FlashPlayer-10.6: Version: 16.0.0.257 - SDK 10.6 [Support]
Default Browser: Version: 600 - SDK 10.10
AdobePDFViewerNPAPI: Version: 10.1.13 [Support]
AdobePDFViewer: Version: 10.1.13 [Support]
Flash Player: Version: 16.0.0.257 - SDK 10.6 [Support]
QuickTime Plugin: Version: 7.7.3
WidevineMediaOptimizer: Version: 6.0.0.12607 - SDK 10.7 [Support]
Silverlight: Version: 5.1.10411.0 - SDK 10.6 [Support]
iPhotoPhotocast: Version: 7.0 - SDK 10.8
User internet Plug-ins: ℹ️
Google Earth Web Plug-in: Version: 6.2 [Support]
Safari Extensions: ℹ️
Norton Internet Security [Cached]
3rd Party Preference Panes: ℹ️
Flash Player [Support]
Java [Support]
Time Machine: ℹ️
Skip System Files: NO
Mobile backups: ON
Auto backup: YES
Volumes being backed up:
Macintosh HD: Disk size: 498.88 GB Disk used: 197.07 GB
Destinations:
Data [Network]
Total size: 2.00 TB
Total number of backups: 94
Oldest backup: 2011-10-03 14:00:42 +0000
Last backup: 2015-01-17 13:47:50 +0000
Size of backup disk: Excellent
Backup size 2.00 TB > (Disk size 498.88 GB X 3)
Top Processes by CPU: ℹ️
 4% WindowServer
 2% Safari
 1% AppleSpell
 0% configd
 0% notifyd
Top Processes by Memory: ℹ️
206 MB iPhoto
129 MB Mail
103 MB Safari
87 MB com.apple.WebKit.WebContent
77 MB mds_stores
Virtual Memory Information: ℹ️
59 MB Free RAM
1.56 GB Active RAM
1.52 GB Inactive RAM
1.03 GB Wired RAM
3.56 GB Page-ins
35 MB Page-outs
Hope someone will be able to help and guide me through a clean up.

nothing seems out of order, apart from the useless Norton Internet Security.
though, since you don't have lots of RAM, consider rebooting the Mac everyso often ( "Time since boot: 7 days 3:2:21").
" Battery Health: Replace Now": indeed, the battery is dead
Did it start getting slow since Yosemite upgrade? (the new OS does tend to slow things down)

Why is firefox becoming extremely slow or stuck when choosing a website in win 7 64-bit pro?

when starting a new website from search or bookmarks it starts with connecting and collecting data from the requested website but it get stuck or is extremely slow. One solution is to click update button several times. Is there a way to solve this problem? I have tested both stable firefox 6 and firefox 7 beta. This is not happening in win xp pro or other windows xp versions. Internet explorer (64-bit) is working fine, but I want to use firefox.

Oh just so no one is confused I did not create this question on the actual laptop I am talking about (thats why it says my OS is XP)

Why is craigslist extremely slow? tried multiples browsers

Similar Messages

Maybe you are looking for