Why is "Do Not Allow License Request" disabled?

I have a Dev Suite w/Automated Test Named-User license assigned to me that I typically like to keep reserved for my main dev computer.  I have a test station computer that has a computer-based LV 8.6 and a computer-based Test Stand Dev System license.  Unfortunately the test station computer always uses my named-user license unless it is already being used by my dev computer.
According to documentation I'm supposed to be able to use NI License Manager to prevent the test computer from checking out my named user license using the "Do Not Allow License Request" option, but it is always disabled.  Any ideas?

DevSuite comes with Labview Professional so I don't know what the difference between "DevSuite Standard" and "DevSuite Professional" is.  Regardless, we have Developer Suite 8.3 with Image Acquisition and Machine Vision and Automated Test.
Setup Details:
Both computers (my dev comp and the test comp) are connected to the network.
I'm logged on to both computers using my network credentials.
I have a named-user DevSuite 8.3 license assigned to me.
The test computer has a computer-based Labview 8.6 Full Dev System with Mathscript license and a computer-based TestStand 4.1Dev System license assigned to it.
I believe the test computer LV installation was done using a network DevSuite installer.  (I suspect that's the root of the problem.)  I don't know if the test computer's TestStand installation was done using the DevSuite installer or a TestStand installer.
VLM Results:
Starting TS on my dev computer first uses the DevSuite license.
Starting LV on my dev computer first uses the DevSuite license.
Starting TS on the test computer uses the computer-based TS license.
Starting LV on the test computer incorrectly uses the DevSuite license.
I suppose if I ran the regular LV installer on the test computer it would switch over to that license instead of my DevSuite license.  Ideally there would be a way to define which license to use if more than one valid license is available.  (Command line switches?)  98% of the time I want the test computer to use the LV Full license, but there's that 2% of the time when I need to use the DevSuite on it.

Similar Messages

  • When I try to use the Message feature on my iPad 2, to send a message to a friends iPhone (on iOS 5 too), why will it not allow me to send the message?

    When I try to use the Message feature on my iPad 2, to send a message to a friends iPhone (on iOS 5 too), why will it not allow me to send the message?

    Check to make sure you are not typing your message in the Subject line.  If you are, it won't let you send the message.  Cut and paste the message into the Message field and you should be all set.
    FYI, you can disable the Subject line from your messages in Settings/Messages.

  • Why am I not allowed to activate my product, CS3, when the product is bought years ago and I still have the serial number? It's an old version, but I don't throw products in the bin, just because they are old.

    Why am I not allowed to activate my product, CS3, when the product is bought years ago and I still have the serial number? It's an old version, but I don't throw products in the bin, just because they are old.

    And what exactly is your problem? Other than going of on a tangent about Adobe's alleged evilness preventing you to activate whatever CS3 product, you have not provided any useful info such as what exact problem you have, what system, what product we are axctualyl talking about and so on.
    Mylenium

  • Why Mavericks do not allow us to connect to specific AP using BSSID?!

    Why Mavericks do not allow us to connect to specific AP using BSSID?
    After get a MAC, to stay connected to the internet at university have being a challenge. We have lots of AP with the same name and my computer keeps reconnecting to a different one. I can't changes the network preferences to a specific network name.
    "airport --associate" is not an option.

    Hello Sir Gudo,
    Thank you for the details of the issue you are experiencing with your external hard drive.  I found an article with steps you can take when an external device is not being recognized.
    I recommend following the steps in the section titled "Top troubleshooting tips" in the following article:
    USB and FireWire Quick Assist
    http://support.apple.com/kb/HT1151
    Thank you for using Apple Support Communities.
    Best,
    Sheila M.

  • Does anyone know why FCP is not allowing me to share a video (47 sec or 18 sec) to facebook

    Does anyone know why FCP is not allowing me to share a video (47 sec or 18 sec) to facebook?

    Hi, is it one of these formats, in 16:9 aspect ratio, & smaller than the size it says on that page?
    http://www.facebook.com/help/218673814818907/

  • Why Apple do not allow Bluetooth sharing between different devices even when I want to share something between apple devices I have to make sure that we have the same application

    Why Apple do not allow Bluetooth sharing between different devices even when I want to share something between apple devices I have to make sure that we have the same application

    We are users just like you and would not know why Apple makes teh decisions that they do , nor are we allowed to speculate about it here.
    From the terms of use:
    do not add Submissions about nontechnical topics, including:
    Discussions of Apple policies or procedures or speculation on Apple decisions."

  • Why does adobe not allow upgrades to boxee box

    why does adobe not allow upgrades to boxee box

    There are many ways of stripping metadata.  Not sure how "locking" it would be of any use.

  • Why does apple not allow 3D

    A statement from the Smithsonian: "....iPad. Although these devices technically fully support 3D graphics in the web browser, due to a restriction of Apple it is not currently possible to use the Smithsonian X 3D explorer on iOS devices." Why does Apple not allow Smithsonian X 3D to run on MAC iOS devices? It runs on other OS such as Android etc.

    John,
    If you know so little about the topic why even respond? Just to take sides? How do you even know your on the right side? Because you bought an iDevice and must obey your master?
    Firstly 63% of video on the web is not HTML5. There is no such thing as HTML5 video.
    HTML has a new tag called <video></video>. This tag allows the playback of videos converted to a specific codec. In safari it is h.264, in chrome it is VP8, in firefox it is OGG.
    Each browser can only handle their codec, so a video that runs in the enw <video> tag in safari will not run in chrome or firefox unless another video is also present that has been converted to the correct format.
    Adobe Flash can play all of them, or any one of them in any browser. Or you can just use .flv and have only one video that plays everywhere.
    As such Adobe Flash plays back h.264 video, and has been doing so way before anyone heard of HTML5. Most hardware today has built in support for this codec as well, making it the best performig codec to be used for video.
    With or without HTML5, h.264 is and has been becoming the "standard" codec for all video.
    So to say 63% of video is HTML5 is a half truth. If you only cinsider safari then yes, 63% of the videos that flash plays can also be played in safari. However that same 63% can not be seen by anyone else as they require a different codec.
    This says that h.264 is the dominant codec, because 63% of all video uses it. However you still need to support the other 37% of video which is not h.264, and you still need to support the other 63% of video for those who dont use safari.
    The best option to bring all this together is Flash. It's the one stop shop for all video across all screens.
    And Flash out performs HTML5 players 10 to 1 on every product on the planet except Apples.... where it somehow becomes a huge resource hog.... but then that may have something to do with Apple not wanting any media consumption to come from anywhere than their pocket.

  • Why does Apple not allow me to Change "Siri's" name on the I5?

    Why does Apple not allow me to Change "Siri's" name on the I5 (NOT how, but WHY)?

    No one here can address a question as to "why" Apple does anything.

  • Why I'm not allowed to create post in support of apple online?

    Trying to post a question, but seeing a message that I'm not allowed to do that, Why?
    Thanks

    You seem to have sucessfully posted here today:
    How to delete "Other" data on MacBok Air?
    Are you trying to make a different post?
    Understand the forums have been ill-behaved for several months since the major format change and we all see spurious error warnings  and occasional failures to post. Sometimes you have to wait a few minutes and try again.

  • Not allow users to disable startup script

    I have written a User Login script for indesign and have successfully implemented in Indesign CS3. However, anyone can disable the login script that I have put in the Startup script by modifying the Preference setting of the Indesign.  I would be very grateful if any one there could suggest me on how to not allow the users to disable the login script put inside the Startup Script folder.
    Thanks,
    Limbu, Keshar

    Thank you very much for you response. But, it is not about the user right permission. There is a selection options in the Perference setting of Indesign. If you untick that option, Indesign will run bypassing the scripts in the startup scripts folder. Is there any way to not allow the users to not select this option so that the startup scripts does not get bypassed?
    In the above preference setting the last check box is not selected hence Indesign will bypass all startup scripts. Only if this last option is selected the startup scritps will run.
    Thanks
    Limbu Keshar

  • Why am I not allowed to post here?

    I just tried to post a question and got "You are not allowed to post or edit this content".  What and why ?

    rccharles wrote:
    and have yet to be logged out
    You have pull.  I haven't been so lucky.  I've been logged out even with reloadevery -- reload failed.  I'm now reloading my profile.
    https://discussions.apple.com/people/rccharles?view=discussions
    Robert
    IF I have pull, I sure would like to use it on other stuff. No pull just a regimen that works 100% of the time
    Try this, works 100% of the time, IF you follow this EXACT WorkFlow... (the numbered list assume receiving an email notice)
        Go to your forum of choice Main Page (this will become your 'Base Camp' page)
        click Login, which takes you to the Login page
        Browser Bookmark that Login Page
        click [Sign In]
            you are now logged in and have started a 'timer' in a set cookie
            you will be logged off without notice after ±30 minutes of inactivity
            clicking a Link that is NOT a JavaScript link resets the timer in the cookie
            I use a browser add-on that reloads the Base Camp page every 20 minutes = NEVER logged off by the timer
            - DO NOT close the TAB,    the AutoReloader is tied to the TAB not the page itself
                Safari - SafariTabReloader
                Firefox - ReloadEvery: "Reload web pages automatically"
        Switch to your email client or WebMail page**
        Click the link to Reply
        AutoSwitches to browser, thread page & post to which you are replying = Login State = TRUE
        If you use an AutoReloader, all you need do the rest of your browser session is repeat #5 & #6
    Vary from this WorkFlow by clicking reply in the email FIRST and all bets are off... you will experience login failed on that page but logged in on another... 100% of the time with that particular email notice - I have not found the workaround or cause
    ** OR CMD+click a link on BaseCamp page to open in a new TAB
    https://discussions.apple.com/people/rccharles?view=discussions  = VERY empty below the TAB bar and above the footer
    https://discussions.apple.com/people/rccharles  = normal Bio page
    https://discussions.apple.com/people/ChitlinsCC?view=discussions  = VERY empty below the TAB bar and above the footer
    where did you come up with the "  ?view=discussions  " in the URL? I have never seen this advised... certainly not the plain ol' " /content " addition nor is it tt2's Magic Twangers. Are you trying to force something to happen that never will? It is a wonder you don't get a 404.Not Found error!!
    CCC

  • Active Directory User which can Create a User but not Allowed to Enable Disabled Users

    Hi Guys, we have a requirement to create a User Group in Active Directory which will grant its members permission to 'Create Users' but not be allowed to 'Enable' 'Disabled Users'.
    We have tried delegating control and assigning permissions by going to 'Security Tab>Advanced'.
    It seems like when a group is granted permission to create users, it will also be allowed to enable, disabled users.
    Kindly advise if it is possible to create a user group with permissions to 'Create Users' but not be allowed to 'Enable', 'Disabled Users'.

    Hi,
    According to my experience, you can assign permission with create/delete user objects. If you want to disable/enbale
    a user, you must be a member of the Account Operators group, Domain Admins group, or the Enterprise Admins group in Active Directory, or you must have been delegated the appropriate authority.
    In general, if you just give a user group the permission to create user objects, it cannot disable or enable user accounts. Please make sure that the permission you assigned is correct and the
    user group are not the member of Account Operators group, Domain Admins group, or the Enterprise Admins group in Active Directory.
    Best regards,
    Susie

  • Why will it not allow me to create an adobe new user id for my new program

    I'm not sure why it won't allow me to create a new user id account.  I just purchased the bundle package adobe photoshop elements 8 and premiere elements 8 for my HP laptop online. I keep getting an error 400 message.

    Can you confirm that at the time of creating your AdobeID you are connected to internet?  As I expect this error message is appear only in case if you are not connected to internet. So please check it again.
    Thanks,
    Vinod

  • Function Active but (BFS 'DIMP) not allowed - Billing Request Editor Web UI

    I am working on setting up the Billing Request Editor.  When I completed the configuration in the ECC 6.0 system and access the Web UI and enter my debit memo request (DMR) that came through my RRB (DIP) process, I get the following error:
    Requested function is active (BF 'SD_01') but not allowed (BFS 'DIMP')
    Has anyone received this error?  How can this be fixed?
    Appreciate any response regardless of how technical.

    Hi Sara, I have the SAP documentation that describes the configuration and setup of the Billing Request Editor.  It however is a bit cryptic, but does give a general guide with screen shots on the type of configuration required.
    I have gone through the steps and though I am able to get the editor's UI up and running, I have a few errors to work through.  I originally had an error stating that the "Customizing for Characteristics was not complete" but solved this error by ensuring that all Characteristics that were setup as "character relevant" for the specific DIP profile were entered in the IMG activity "Select Characteristics from Dynamic Item Processing".  I found that it this error was resolved when the characteristics were entered in the exact sequence as they appear in the DIP profile (ODP1).
    Since then I have come upon two other errors that I am now working through:
    1.  "Form of Address Key not defined" - even though I have updated the form of address keys and config with generic values
    2.  "H is not a unit without dimension" - I assume this relates to the setup of the unit of measure and therefore requires me to use HR instead of H for hours.
    Has anyone encountered and solved these two items? 
    Sara, I hope the first part helps.  If you can't find the SAP documentation I would suggest looking up OSS note 1223103 and also check related notes.  The documentation should be attached.  I can't recall the number offhand where the documentation is found.
    Otherwise I can try to get it to you via other means.

Maybe you are looking for